Satellite A - will not burn CDs

Similar Questions

• I also have problems with wmp 11. Will not burn CDs.

  I use to burn CDs all the time. Then, for some reason any one day it wouldn't let me on wmp won't be on Itunes. I checked the updates and tried different settings. After I insert a blank cd, it says check media for about 5 minutes, it seems. Then everything stops.

  Hello

  What happens if you close all programs and then put in a blank CD?

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows Media Player will not burn CDs

  I have a ton of gripes about this crappy program, at the absence of easy navigation (where the hell is the tab "Check for updates" / "about", * can't find anything) for the long time of waiting just for the stupid thing may work correctly. My question is this: why I can not burn CD with Media Player? Lol I have always, even if Microsoft was supposed to be the smart company making the best stuff, but I don't see these days is garbage. It's sad.

  Nevermind, got the disc to burn on my Macintosh instantly without any problems.  To the review windows.

• Win7 dvd & cd maker will not burn for all formats

  Windows 7 Ultimate (used to have xp, & it worked) will not burn cds & DVD for playback in standalone players. Will only play on the pc.

  The version of the audio driver is now 6.1.7601.17514

  The modem is Conexnt

  VGA driver nVidiaMotherboard is: NVIDIA

  Windows 7 Ultimate (used to have xp, & it worked) will not burn cds & DVD for playback in standalone players. Will only play on the pc.

  The version of the audio driver is now 6.1.7601.17514

  The modem is Conexnt

  VGA driver nVidiaMotherboard is: NVIDIA

  ===========================================
  Windows 7 what app do you use to burn video DVDs
  and video CD?

  Have you tried to use DVD creation in Windows 7 to burn your DVD?

  Read the following article.

  Windows 7 - burn a video DVD with Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
  (Windows 7 Home Premium / Professional / Ultimate / Enterprise)

• Satellite P10: The drive will not burn DVD

  Hope someone can help me,

  I have a Toshiba Satellite P10 and have just received some photos software, burning
  But my drive will not burn DVD, I try with discs DVD - RW which must work my laptop.
  What is happening is when it comes of the burn on the part of the disk of the process he starts, but it fails.

  I tried to burn it with Nero, but even if I burn OK on any CD discs with this software it will not work on DVD discs. It's really annoying because when the burning process it fails so that it makes the DVD - RW disc seem curupt and then my drive has problems mounting the disc to try a deletion once more.

  I have the Nero log file failed
  Done if it's any help to anyone.

  A big thank you Michael.

  Hello

  What about different DVD media? Have you tested the media DVD-R or DVD + R common?
  Have you tried different brands of DVD?
  I can't give you a properly answer why the drive can't burn your DVD - RW, but to my knowledge not every media is supported by the player.
  So I think you should check different DVDs.

• My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

  My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

  I have a lightscribe, CD/DVD player, and I started having problems about a month ago... I tried to burn a lightsribe CD and my computer told me that I didn't have a CD Lightscribe drive (I!)... then when I just tried to burn the music on the CD, he didn't do it either... Finally a week ago, I tried to play a movie on my laptop, and that does not work either.

  When I insert in the film or the cd, the drive lights up and I can hear the work, but it is as if she has no connection with my laptop and my laptop is not picking up the CD/DVD drive try to play a movie or a cd.

  A friend suggested that I go to the HP website and am trying to download a driver, but I didn't know what to do once I got to this website, and I don't know if it will work.

  If you know how to solve this problem, or if you have had a similar problem with your computer, please help, thank you.

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• Satellite L30: reader will not read CDs or DVDs

  In the evening, I was recently testing on various operating systems on my laptop and eventually decided to return to Windows Pro.
  It was working fine until a couple of days, but then the hard drive started making a rattling noise, like R/RW head stuck.

  Now it will not read CDs or DVDs, can someone please help and tell me if it's a failure of the software or hardware, and the best way to fix it?

  Hello

  The drive problems are not uncommon and may still occur.
  For the most part the purpose of calibration training does not work correctly.
  The objective must be calibrated in the correct position until the player will read or write to the media.
  This fault is not reperable and especially the drive needs to be replaced!

• My Windows Media Player will not burn a CD, it is 99%, then will not be finished.

  My Windows Media Player will not burn a CD, it is 99%, then will not be finished. Used to work fine, no problems then just started does not. I tried Microsoft FixIT & or troubleshooting solved my problem. What can I do to fix this?

  Hello

  1. what error message you get when it ceases to burn a CD?

  2 What problem confined to a particular CD?

  3 did you change on your computer before the show?

  4. have you tried Open-the-playing-and-burning-cds-dvds-and-bluray-discs-troubleshooter?

  Method 1: Try a different CD and check if it helps:

   

  Method 2: Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

   

   

  Method 3: Try to perform the clean boot and check if it helps, here is the link:

  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• my screen is blue and the playlist will not burn to a cd

  try to burn a playlist to a cd.  Playlist will not burn.

  You use a PC or a Mac - I can then ask for your message to be moved to the iTunes for Windows or iTunes for Mac forum

• Satellite L300 will not let me connect

  My Satellite L300 will not let me connect unless I'm in safe mode and when I go to advanced options it just comes up with a blue screen

  Help!

  Who knows what's the problem here?
  Maybe you should install new OS. You can enter boot options using F8 at startup?

  Repair my computer option is available?

• Satellite A100 - will not charge the battery

  Hello

  I have ned to help. My Satellite A100 will not charge the battery. He works the power adaptor for the led indicates charging status, battery shows 1% of loading tatus information, but none does change - no loading any time. When disconnected everything just stops off like normal desktop.

  I've already put battery in and out, made upgrades to the antivir software, makes Toshiba controls, tests, but what ever he did did not any change. If there is no way for restoration of battery how to check what the problem is I have no second battery or AC I can always buy new batttery but I don't know if the old one is broken and weather new would work properly?

  Best regards
  pawelg

  Hi pawelg,

  I agree with the user above. The battery can be charged only up to 500 times, and after that, it must be replaced. I think it's the case now, I mean that everything works correctly on the AC adapter so I think that the battery must be the reason for this.

  By the way: you can buy a new battery to an authorized service provider. ;)

• We will not burn SN-S082H CD player using iTunes - error 2131

  Hello

  I just bought a laptop PC Nextday with the SN-S082H command that will not burn CD using Itunes - error 2131 (I think from memory).

  Could someone let me know the solution to this?

  Thank you, Rob.

  I think that this error due to consistent problems.
  I read in some articles of the computer that the iTunes software is not fully compatible with different CD/DVD drives firmware.

• Satellite P200D - will not read the Memory Stick Pro duo adapter

  Kia Ora
  My Satellite P200 will not read my Memory Stick Pro Duo adapter, both brand Sony.

  I am running Vista Home Premium. SD cards are read OK.
  The adapter works fine in my PC running XP Home premium. I tried two cards different pro duo. Help, please!

  Hello

  I think you should consult your user manual because this type of card is not supported:
  + Memory Stick Duo/PRO Duo and Memory Stick adapter are not compatible with the multiple digital media card slot. Do not insert the Memory Stick Duo/PRO Duo into the slot. Data lost or damaged if you use one card other than those supported. +

  Do you have more questions? ;)

• Optical drive will not burn

  I saw that there are many other positions on this, and although I found others who had descriptions which were similar to mine, the patch did not work.

  My specs:

  Windows 7 64-bit SP1

  H8 HP desktop PC - 1360t

  My optical drive: DH16ACSHR

  My driver for the optical drive is the cdrom.sys, the version of the file: 6.1.7601.17514, date 21/06/2006 driver

  When I bought my computer, I did a clean install of Windows 7 64-bit. A ran all updates at once and drive perfectly serious. A few weeks later, it will not burn. I use Windows to burn simply .pdf files, and it gets to the point where it says 'burn', but after I click on burn the dialog box disappears. The drive makes noise and rotates the disk and writes data to it, but the dialog box never pops up or check the disk. It shows no more burn % completeness. If I try to remove the disc, the drive does not open. If I open with a paper clip, because the disk rotates, it sure is beating sounds and jams. When I open the drive and the drive, the drive clearly has written data to, but it cannot be read by other readers. It just says: the disc is no longer a Virgin, but I cannot see what is on it.

  I HAVE ALREADY TRIED:

  Remove/uninstall the driver

  Checking the registry entry for the upper and lower entrances, THERE ARE NONE

  Being run/scannow - Windows comes up saying that it could not find any problems, all right.

  Update driver - he says I have the latest driver

  Roll back the driver - he says that there is no driver installed previously

  I had a HP Office before a different model and exactly the same thing happened then. When I first came to this other, it burns very well, so I thought that maybe it was a problem with the previous machine... but then after a few weeks it started doing the same thing.

  I'm confused because when I look at the release date for the driver, it's super old, and he says it's the latest version... but Microsoft lists 50 updates to it at least between then and now, some of them as recently as June. I can't seem to find a way to download this driver common windows by itself and install it this way or the other.

  I refuse to do a complete reinstall because I do not think that it will solve the problem more than temporarily. Within the company, it is the fourth total office with what has happened, and whenever we do a clean install, it works at first but then goes back to the same problem again.

  Hoping someone has an idea where I can get a newer than 2006 for this device driver.

  Hello

  Hope the following patch helps:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Good luck.

• Windows 7 starter edition will not burn DVD and will not format

  • My recorder DVD format player, will play and burn DVDs when I move my dvd drive to another computer running windows vista
  • It will not burn a dvd or format a dvd rw disc when it is attached to my netbook toshiba running windows starter 7

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  Engraving for Windows 7 Info

  If your computer has a CD or DVD burner, you can copy files to a recordable disc. This process is called burning a disc. Windows Burns discs in the active file system format or in ISO image format, depending on which disc format you choose.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner