Display a number with a decimal other que.00

Similar Questions

• Generate a random number with a decimal point

  I searched all over the internet and cannot find how to generate a random number that had a decimal.

  I'm trying to randomly generate numbers between 12.0 and 13.0.

  Here is my code... I know its bad because of Math.round and Math.random, but I can't seem to find something that deals with a decimal...

  addEventListener (Event.ENTER_FRAME, fl_EnterFrameHandler_1);

  function fl_EnterFrameHandler_1(event:Event):void
  {
  Volt.Text = Math.round (Math.random () * (1) + 12) m:System.NET.SocketAddress.ToString ();
  }

  Any suggestions?

  -Pat

  Try this,

  addEventListener(Event.ENTER_FRAME, fl_EnterFrameHandler_1);
  
  function fl_EnterFrameHandler_1(event:Event):void
  {
  
       var rndNum:Number = int(Math.random()*10)/10; // Generate random num with 1 decimal place
       var newVal:Number = newVal + 12;
       volt.text = newVal.toString();
  }
  

  If you want 2 decimal places then replace the 10 per 100.

• Format a number with a decimal number to display the value, but not the comma

  I have a value of 129,50 in the comic book. I use the function htp.prn () for this export value in a txt file. I have the field padded by leaders 0 (so it looks like 0000129.50)
  I need to keep the value for le.50 but don't want the comma appears (so I need it to look like 000012950), but can not find a way to keep the value for le.50 but not actually show the decimal point - of ideas? (APEX 4.0 11g)

  Multiply by 100 and remove the formatting. HTP. PRN (to_char (number_item, ' 99999999999'));

  Published by: Kléber M Sep 14, 2011 05:10

• Display Total table with 3 decimal places

  Hi people,

  I wanted to display table Total for a column in the table with 3 Decimals.I have used the code below to set to 3 decimal places, but his does not work.

  In the application process:

  Formatter formatter = new OADecimalValidater ("#, ##0.000;(#,##0.000)","#, ##0.000;(#,##0.000)");

  OAAdvancedTableBean expTable = (OAAdvancedTableBean) webBean.findIndexedChildRecursive ("ExpenseDtlsRN");

  	If (expTable! = null)
  	{
  	OATableFooterBean footerBean = (OATableFooterBean) expTable.getFooter ();
  	System.out.println ("footerBean:" + footerBean);

  	If (footerBean! = null)
  	{
  	OATotalRowBean totalRowBean = (OATotalRowBean) footerBean.getTotal ();
  	System.out.println ("Formattotal:" + totalRowBean);

  	totalRowBean.setAttributeValue (ON_SUBMIT_VALIDATER_ATTR, trainer);

  	}
  	}

  Please help me I need very urgent.

  Hi people,

  I found the solution

  Formatter formatter = new OADecimalValidater ("#, ##0.000;(#,##0.000)","#, ##0.000;(#,##0.000)");

  	OAColumnBean ocb = (OAColumnBean) webBean.findChildRecursive ("column29816");
  	ocb.setAttributeValue (ON_SUBMIT_VALIDATER_ATTR, formatter);

  It worked for me

• [REQUEST] Automatically display the number with the format mask

  Hi Expert,

  I use Jdeveloper 11.1.1.6.0.

  I have a problem to display the input text that automatically uses the format mask user input, as for example the entered user 10000 then the field will automatically display of 10,000

  Is this possible to do?

  
  

  I already find but I just had to format mask that the user must input 10 000 not automatically display in format.

  
  

  Please your advice, really appreciate your help.

  
  

  Thank you

  I already find but I just had to format mask that the user must input 10 000 not automatically display in format.

  Can you describe your use case a little more?

  The format is applied only when the focus is moved out of the field.

  You want to display the groups directly separator when the user inserts the value in the field?

  In this case, you will need to use javascript, and format the entry after each character. This technique is described in the blog of Frank https://blogs.oracle.com/jdevotnharvest/entry/get_social_security_numbers_right

  Timo

• Showing results with one decimal two. Force the decimal.

  Hello

  Im a simple computing of writing device.

  You enter a digit, press one of the two buttons to multiply by a number, and then the result is displayed. The result is copied hide the result from the button you press on and visa versa.

  I'm having a problem to display the result with a decimal point two constant.

  I'm using strings and so do not know how to do this.

  Here is my code:

  import flash.events.MouseEvent;

  restrict entry to only numbers textfield

  txtInput.Restrict = "0-9";

  restrict the input textfield only a two-digit

  txtinput.maxChars = 6;

  event listeners

  btnW.addEventListener (MouseEvent.CLICK, WHandler);

  btnC.addEventListener (MouseEvent.CLICK, CHandler);

  btnW.addEventListener (MouseEvent.CLICK, hideC);

  btnC.addEventListener (MouseEvent.CLICK, hideW);

  functions

  function WHandler (e:MouseEvent): void

  {

  calculation of white

  var answerW:Number = Number (txtinput.text) * Number (0.90);

  txtWResult.text = answerW.toString ();

  }

  function of CHandler (e:MouseEvent): void

  {

  calculation of the color

  var answerC:Number = Number (txtinput.text) * Number (0.99).

  txtCResult.text = answerC.toString ();

  }

  function hideC (e:MouseEvent): void

  {

  Hide the result color

  txtCResult.visible = false;

  txtWResult.visible = true;

  }

  function hideW (e:MouseEvent): void

  {

  Hide the white result

  txtWResult.visible = false;

  txtCResult.visible = true;

  }

  After having had a look online I found these two resources:

  http://helpx.Adobe.com/Flash/KB/rounding-specific-decimal-places-Flash.html

  and

  http://StackOverflow.com/questions/11469321/decimals-to-one-decimal-place-in-AS3

  But I'm confused when combining these techniques with ropes.

  Any help would be greatly appreciated,

  Thanks in advance

  Mr B

  Use the toFixed() class number instead of the toString() method.  The result is a string that contains the number of decimal places you specify.

  var answerW:Number = Number (txtinput.text) * Number (0.90);

  txtWResult.text = answerW.toFixed (2);

  var answerC:Number = Number (txtinput.text) * Number (0.99).

  txtCResult.text = answerC.toFixed (2);

• Decimal display problem number ASCII

  Having a weird problem with a pilot Plug-and-Play for the Keysight/Agilent/HP 8510 C.    There is a driver of VI (joint) called «Output Active Marker.vi»

  The problem I have with this VI is that it works great my marker value between 9.9999 and - 9.9999.

  When marker value will between 99.999-to-10,000-10,000 - 99,999... VI does not move the decimal place on the DBL indicator.   For example: a reading of marker-15.347 display - 1.534

  Also, when a reading greater than 100 or less than-100 is dicplayed, it has the same problem with the decimal point.       Example:-104.56 bed - 1.04

  I have shot-up the word Agilent Key dictionary for this function (located here: http://www.keysight.com/upload/cmc_upload/All/08510-90280_8510KeyWords.pdf ) and it says that the output is an ASCII string, a undetermined DBL. (page 515 & 516)

  I tried to take the VISA Read and Write functions and output directly to the chain of output... reading but it has the same problem.

  "" So it seems that this function of reading VISA plays nice with the C. 8510 .oes someone has an idea of the way of "difficulty" it?

  Thanks for your help guys.    All I had to do was remove the bytes read-write thread, then the thread count to a constant 49 at the input to the function Read byte.   Works perfectly with no other required conversions.

  Anyone know who is the author of this Plug-and-Play driver?   This feature should probably be updated with these changes.

• Display quantity with a decimal in the xmlp .rtf file

  Hello
  
  I get the value of the amount without decimals in the .xml file. But while displaying in .pdf file, how can I display quantity with a decimal value.
  
  For example: If the value is 90, it should display as 90.0
  
  I see only two decimal places in the .rtf Format file. How can I do this?
  
  Thank you
  HC

  Number formatting, remove a zero... (keep only a single zero decimal)...

  HTH...

• When you use Excel or my Peachtree Accounting program, entered digital as "$152(32 in the accounting package or the same number with a square symbol as the decimal point in Excel.)". No idea what I should check first?

  When you use Excel or my Peachtree Accounting program, entered digital as "$152(32 in the accounting package or the same number with a square symbol as the decimal point in Excel.)".  No idea what I should check first?

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Office Excel and would be better suited to the office community. Please visit the link below to find a community that will support what ask you

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?d=1

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Save a number to 2 decimal places

  Hello world
  I created a form in which I calculate 2 numbers with decimals like 6.52 and 4.59, so that the result is displayed on another element. The 2 numbers I calculated and the result are all saved in the database, but they rounded when they are registered. For example: 6.52 is recorded as 7 and 4.59 as 5
  The way I set those fields in the table is:
  
  FIELD_ONE NUMBER (3)
  FIELD_TWO NUMBER (3)
  FIELD_THREE NUMBER (3)
  
  Is someone can you please tell me how I can set these fields to allow the third decimal as well?
  Thanks in advance!

  Hello

  (3) NUMBER means the number can have up to 3 digits, but without decimal point. Insertion of values with a decimal point will not cause an error; the values are simply rounded to an integer.
  NUMBER (3, 2) means the numebr can have up to a total of 3 digits, 2 of them after the comma. Insertion of values with more than 2 digits after the comma will cause an error; the values will be just strong at a multiple de.01

• View all numbers with 2 decimal places.

  Hi all
  
  We have a requirement in our code where we want all numbers must be displayed to 2 decimal places.
  
  For example: If a number is 21.234 then it should be displayed as 21.23
  If a number is 21.289 then it should be displayed as 21,28
  If a number is 21 so it should be displayed as 21.00
  
  Can someone help me please how do in a SQL query.
  
  Kind regards
  Shruti

  Hi, Shruti,

  This shows a couple of things you can do:

  COLUMN     trnc     FORMAT     999999.99
  
  WITH     got_x     AS
  (
       SELECT     empno / 1000     AS x
       FROM     scott.emp
  )
  SELECT     x
  ,     TO_CHAR (x,            '999999.99')     AS tc
  ,     TO_CHAR (TRUNC (x, 2), '999999.99')     AS trnc_tc
  ,     TRUNC (x, 2)                              AS trnc
  FROM     got_x
  ;
  

  Output:

  `        X TC         TRNC_TC          TRNC
  ---------- ---------- ---------- ----------
       7.369       7.37       7.36       7.36
       7.499       7.50       7.49       7.49
       7.521       7.52       7.52       7.52
       7.566       7.57       7.56       7.56
       7.654       7.65       7.65       7.65
       7.698       7.70       7.69       7.69
       7.782       7.78       7.78       7.78
       7.788       7.79       7.78       7.78
       7.839       7.84       7.83       7.83
       7.844       7.84       7.84       7.84
       7.876       7.88       7.87       7.87
         7.9       7.90       7.90       7.90
       7.902       7.90       7.90       7.90
       7.934       7.93       7.93       7.93
  

  Column x is the number, such as SQL * more it displays by default. Note there is as many digits after the decimal point are needed.
  TC column shows how TO_CHAR can put in shape the number with exactly 2 digits after the decimal point. This automatically rounds the number nearest multiple de.01, so on the first line (for example) 7.369 gets displayed as 7.37.

  user11272043 wrote:
  ... If a number is 21.289 then it should be displayed as 21,28

  You (apparently) still want the number rounded to 0, then the tc column isn't quite what you want.
  Column trnc_tc is exactly what you asked for, with the number rounded to 0 (when a rouning is possible) and 2 digits after the decimal point.
  TC column is also exactly what you asked, but he uses the language SQL * Plus formatting rather than SQL. In addition, TRNC column is a NUMBER, while the column trnc_tc is a VARCHAR2, because TO_CHAR, as its name implies, returns a VARCHAR2.

  SQL * more order

  SET   NUMFORMAT  999999.99
  

  change the default format for all the number of columns. If you use it, you can ignore it for individual columns using TO_CHAR (since it returns a VARCHAR2, the FORMATNUM does not apply), or an order of the COLUMN. Also, if you use the VALUE FORMATNUM 999999.99, you must still explicitly TRUNC each number, otherwise 21.289 will come out as 21.29, 21.28. not.

• Display of images with a color cast

  I have a problem with the images displayed with a cast on some sites of color (including Facebook and I agree with the image library (I'm a pro photographer).) This does not happen with explore.
  I did screen grabs two browsers and paste into a single document to:
  http://www.images2cherish.co.UK/FirefoxColourCast.jpg
  where you can see the difference.
  This is one of my images, and I actually copied the page when it displays on the website www.photographersdirect.com , but I saw it happen with pictures of other people.
  Curiously, it seems not to happen with each photo.
  Have you any suggestions, please. If this continues, I'm going to have to explore or else, like the colors of the image is really important to me.

  The pref gfx.color_management.enabled is no longer used (you get redirected)

  Don't forget to use the gfx.color_management.mode pref rather (value of 0 disables color management).

  • http://KB.mozillazine.org/GFX.color_management.mode

  You can try setting the pref gfx.color_management.enablev4 true on the subject: config page and to close and restart Firefox to allow ICC V4 based on Firefox 8 +, but this feature is not yet fully implemented, then there may be problems in some cases.

  Test page:

  • http://www.color.org/version4html.xalter - ready for your system ICC Version 4?

• Hello everyone, I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro, Win10/Bootcamp. Is anyone know the procedure to get the display to work with Bootcamp Windows 10?  I have connected screen but no picture. TY

  Hi all

  I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro Win10/Boot Camp running. Is anyone know the procedure to get the display to work with Bootcamp/Windows 10? Is there a setting in the training Camp that must be turned on to make it work? I have connected screen but could not get a desktop display.  Any help would be really appreciated! TY

  The monitor should have a TB and adapter power connector. The monitor works on both OSX. ? If so, shut down of windows, connect monitor and start Windows. Your TB 2012 monitor is not plug-and-play with Windows.

  Please see ports Thunderbolt and views: frequently asked questions (FAQ) - Apple Support .

  1. the "hot pluggable" Thunderbolt devices using Windows with Boot Camp?

  Thunderbolt hot plugging is supported under Windows 8 or 8.1 on all Macs from 2014 and later.

  For all other Mac computers, Windows 7, 8 and 8.1 scans and active them Thunderbolt devices connected to ports Thunderbolt during the Windows startup process. If your device has been plugged in not at startup, Windows detects not without a reboot.

• How to display the number of socket in the ListBox UI control?

  I want to display the number of socket in the Listbox control on execution. I use DisplayExpression method, set the entry as '% TestSocketIndex', but it does not work. This methond works fine if I connect the Combobox of UI control to ExecutionViewMgr.ConnectExecutionList.

  Is there a solution

  

  

  Hey wellsc,

  I have looked at this issue and ran into the same issue you described. I dropped the CAR 482840 for a developer study the matter further. Unfortunately, workarounds only I can think immediately would be to use a ComboBox control or to implement the functionality desired by using a native LabVIEW ListBox.

  Let us know if there is something we can do to help, or if you have other questions about how to implement one of the workarounds. You can still use this CAR number to check the status of the issue, as well.

• Bad display on MX700 with 3 endpoints connected

  Bad display on MX700 with 3 endpoints connected | Telepresence | Cisco support community

  Hello

  We have 3 MX700 (two screens) with multisite license and tried a conference between the 3 sites, but we had a bad behavior on the third connected site...

  Assume the following:

  -Call of Site1 site2: site1 and site2 see on screens separated as planned

  -Site1 calls training3 to join them at the Conference and then here is the result:

  * site1 sees site2 and training3 on screens separated as planned

  * site2 sees site1 and training3 on screens separated as planned

  * training3 sees site1 and site2 on the same screen and the other screen is only usable for a common presentation or to see the local picture

  It was impossible for training3 to change the layout of the screen. The only thing was to move the image of the local camera on different screens, but it was impossible to see site1 and site2 on different screens. It's really annoying because it displays site1 and site2 small on the same screen.

  For more information on the 10 touch, the screen showing site1 and site2 was named by 'site1' name. As if the video stream only site1 calling, there is no mention of site2 anywhere.

  Can someone help us with that?

  Thank you in advance for your help and best regards.

  DCCP

  // // //

  If I understand correctly - the call scenarios your assumptions are incorrect. Only the MX hosting the call will be other ends remote on separate screens. The standard features of SIP/H.323 allowing for a live video stream, a second for the content. Cisco Telepresence Server is a feature called "multistream" which allows you to send more than a live stream, but not the multi-site integrated in the codec. The call - in your example one - site hosting site they can see sites 2 and 3 on separate screens because they are in calls with each of them.

  In your balls - if site called 1 2 and 3, only 1 site would see the two separately. Suggest site two, but it would be no less than two called 1 and 3 of the site.

  If the site called 1 2 and 3, site 1 would show 2 and 3 on both screens if there is no content, and they combine on 1 screen if it has content. Sites 2 and 3 would show only the handset (usually continuous presence) image on the primary and the second would remain turned off unless it had contained.