Display and removing the history of the internet on the router)

Similar Questions

• I have a laptop with Windows XP. After getting a virus, I scanned with AVG and removed the threat. After re-booting, I can not connect to wireless internet.

  I have a laptop with Windows XP.  After getting a virus, I scanned with AVG and removed the threat.  After re-booting, I can not connect to wireless internet.  The icon shows "acquiring network address".  I connected the router directly on laptop computer connected to the wireless network and still unable to connect.  I tried to restore the system as well, but the message says "unable to restore the system, no changes were made.  Help?

  original title: acquisition of network address

  Hello, Steve.

  Try this link below on how to reset IE and let me know if it helps.
  http://support.Microsoft.com/kb/923737

• I want to allocate more disk space for my c drive and remove the drive d

  I want to allocate more disk space for my c drive and remove the drive d. I 26 gig on the d drive and only using less than 1% of it, and I have the same amount on c, but only 39% c left. How to do this.

  LEM explained the problems that you tried to resize partitions on the same drive.

  You can create more free space in C in carrying one of the measures suggested below.

  The default allocation for the restoration of the system is 12% on your C partition is more generous. I have them would be reduced by 700 MB. Make my computer right click on your icon, and select System Restore. Place the cursor on your C drive select settings but this time find the slider and drag it to the left until it shows 700 MB and output. When you get to the settings screen, click on apply and OK and leave.

  A flaw that might be useless which is for temporary internet files, especially if you keep no copies on the disk offline. Setting the default value is 3% of the walk. Depending on your attitude to copies offline, you could bring it to 1% or 2%. In Internet Explorer, select Tools, Internet Options, general, temporary Internet files, settings to make the change. At the same time, look at the number of days, the story stands.

  The default allocation for the basket is 10% of the disk. Change to 5%, which should be enough. In Windows Explorer hover over your Recycle Bin, right click and select Properties, Global and move the slider from 10% to 5%. However, try to let you become so complete that if it is complete and you delete a file by mistake it will bypass the Recycle Bin and have gone forever.

  You can generate more space in the system (usually C) the folder move partition.

  For temporary Internet files, select Start, Control Panel, Internet Options, temporary Internet files. Settings and move back.

  To move the storage folder Outlook Express select from Outlook Express Tools, Options, maintenance, store folder and change.  http://www.tomsterdam.com/insideoe/files/store.htm.

  How to change the default location of the My Documents folder: http://support.microsoft.com/?id=310147

  You may also change the default locations of the files in Microsoft Office programs when you choose to move the My Documents folder. For Word, go to tools, Options, file locations, highlight the Documents, click on edit and change the path. For Excel, go to tools, Options, general, and change the default path.

  My Documents is one of the many the created system of special folders, which include my pictures, and my music. It can be more easily modified using TweakUi. Download TweakUI, one of MS powertoys, here: http://www.microsoft.com/windowsxp/pro/downloads/powertoys.asp.

  In TweakUi, select workstation, special folders. You can scroll down to see the full list of special folders to the left of the button to change the location.

  You can move programs, but to do this, you must uninstall and reinstall the program. With Word and Excel, the existing data files are not affected by reinstalling. Most of the work in question is going to be reinstall all updates issued after those that are included with the original Microsoft CD / DVD.

  If your drive is formatted as NTFS another potential gain arises with your operating system on your C drive. In the Windows directory of your C partition you will some uninstall files in your Windows folder in general: $NtServicePackUninstall$ and $NtUninstallKB282010$ etc. These files can be compressed or not compressed. If compressed text the name of the folder appears in blue. If these files are not compressed you can compress. Right-click on each folder and select Properties, general, advanced, and check the box before you compress contents to save disk space. On the general tab, you can see the winning amount by deducting the size on disk size. File compression is only an option on an NTFS formatted disk partition / partition.

  I'd be interested to see a report of Disk Defragmenter. Open Disk Defragmenter and click analysis. Select view report, and then click Save as and save. Now find VolumeC.txt in your My Documents folder. Open the file, place the cursor anywhere in the file, select Edition, select all to select all the text and copy and paste into the body of your message. To do this, before you run Disk Defragmenter because it is more informative.

  Select Start, all programs, accessories, System Tools, cleaning disk to emptying your trash, delete temporary Internet files and other selected options. I recommend also you click Other Options, System Restore and delete all but the last system restore point. Run Disk Defragmenter

  Using the system restore option is most appropriate when your system is slow and you need to increase the free disk space on your C partition. If you have errors that could be solved by using the system restore to your system settings back to before that the error occurred initially, do not use this option.

  Select Start, Control Panel, Folder Options, view, advanced settings and check the box in front of "show files and folders" and 'Hide protected operating system files' are unchecked. You may need to scroll down to see the second element. You should also make sure that the box before "Hide extensions of known file types" is not checked. Notwithstanding, there are some files that are hidden. Again, you will not see the System Volume Information folder.

• When I try to "save under" I get a message "Initalising the root folders to display" and then the screen freezes

  When I try to "save under" I get a message "Initalising the root folders to display" and then the screen freezes. Sometimes when I click several times on the target folder it opens other times it does not. Any thoughts?

  Hello

  You try to save files using Microsoft office?

  If so, this article should help you

  The program stops responding when you try to open or to save a file in an Office 2002 program, in an Office 2003 program, in a 2007 Office program or in a program Office 2010

  http://support.Microsoft.com/kb/313937

  If its with a different program and then check if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.

  Step a. refer to the article below for the procedure safe mode in Windows XP

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step b. You need to perform a clean boot to find the program that is causing and then disable or remove.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353/en-us

  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse.

  My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse. It runs OSX Mountain Lion (not sure which version) and is a model 27 inches.

  have you tried to change the batteries in the mouse?

• S EPQuicker displays and closes the program when I run epson easy photo print with sx230

  S EPQuicker displays and closes the program when I want to open an easy photo with print my sx 230

  Hello

  You asked your question in the text of the Microsoft Community. Please could you click on the globe icon to the world (change region) at the bottom left of the screen and then choose your preferred language. Now ask you question once again.

  Thank you.

• I have a program that I can't remove. its not in Add and remove the progeams

  I have a program that I can't remove. its not in Add and remove the progeams

  It may be a small program which do not present in the Add Remove Programs list.

  Try to get into the programs folder, and then delete the folder with the name of the program on this subject.

• computer falls asleep and only wake him up is to disconnect and remove the battery and it will come back, and then reinsert the battery it's a dell

  My computer is asleep and won't wake up. If I unplug the unit and remove the battery, it will be ok. Then

  I can reinstall the battery. It's a dell intel Insider core 13

  Hi Jim,.

   

  This problem may occur because of low battery or power problems. Please follow the instructions to solve the problem:
   
  Refer to the suggestion of Leo Huang dated Tuesday, September 14, 2010 09:01
   
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/0866de60-A16B-41c4-8a6e-b56c848478f3
   
  Let us know the result. If the problem is still not resolved, we will be happy to help you further.

• my laptop suddenly stopped to connect to any bluetooth device. I restored my system and removed the programs installed before having this problem.

  my laptop suddenly stopped to connect to any bluetooth device. I restored my system and removed the programs installed before having this problem.

  Hi sh8kdown,

  Thanks for posting this question in the Microsoft Community!

  I understand that you can not connect to Bluetooth devices on the computer. I'm sorry for the inconvenience caused to you. Rest assured that I will do my level best to help you.

  (1) what is the brand and model of the computer?

  (2) what is the model number of the Bluetooth devices?

  (3) you get an error message?

  (4) did you of recent changes to the computer before the show?

  I suggest the following methods and check if it helps to solve the problem.

  Method 1: Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Troubleshoot issues with Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  (Applicable to Windows 7 as well)

  Method 3: Error: "Pilot of Bluetooth device not found" when you try to connect a bluetooth device: http://support.Microsoft.com/kb/2654568 

  Reference:--

  Add a Bluetooth device to your computer: http://windows.microsoft.com/en-US/windows7/Add-a-Bluetooth-enabled-device-to-your-computer

  Change settings for a Bluetooth compatible device:

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• Select reverse and remove the effect from Photoshop to Illustrator

  Hello

  I'm new to Illustrator and do my best to understand how it works! I'm used to working with Photoshop and there are some things that I could do it on Photoshop and am now trying to find a way to make it look as I want... So here goes

  I'm looking to have this effect on Illustrator. (For those who you don't see the image, mimage is a globe with the text that appears only on continents. The text disappears when the image is empty. I forgot to save it as a png, but white is transparent.

  

  I managed to write my text in Illustrator and change the text to "Color Burn" effect, so that it looks the same on all continents. However, I am unable to remove the text where it leaves the other layers. The text remains black where the background is transparent.

  

  So I was wondering if there is a way to remove the text outside the continent. The same effect, you should achieve in Photoshop by selecting reverse and removing the text (pixelated).

  Make a copy of the shape of the continent. Select the copies, and then choose the command object > path > make a compound path.

  Then use the new compound path as a clipping on the text mask. With her before she and the text and the text selected, choose object > path > make a clipping mask.

• Impossible to update LR CC ~ my one day to change and nothing work updated my Mac and all LR will do is CRASH!  Need help.  Tried to stop CC and remove the 1.0 file already and who does not work for me.  What can I do?

  Impossible to update LR CC ~ my one day to change and nothing work updated my Mac and all LR will do is CRASH!  Need help.  Tried to stop CC and remove the 1.0 file already and who does not work for me.  What can I do?

  If lr crashes repeatedly, reset preferences.   http://www.lightroomforums.NET/showthread.php?14226-resetting-%28or-trashing-%29-the-light file-Preferences-room

• Moves from 2014 version to version 2015, considered an update? If this is not how to deploy the 2015 version and remove the 2014 version?

  Moves from 2014 version to version 2015, considered an update? If this is not how to deploy the 2015 version and remove the 2014 version?

  We currently have Adobe CC deployed on more than 4,000 computers, I am now looking to update installation on the newer versions that are 2015. If I create a new package it installs the latest but it also lets older versions of 2014.

  Is there a way to delete the versions of 2014? Or can we update the versions of 2014 and 2015?

  It's actually an upgrade.

  If the two can exist side-by.

  in the cc office application, there is an option to remove the older versions, but I don't know about the enterprise deployment.  You should check the documentation of the company.

• I have Adobe Reader XI. Is it possible I can fix asymmetrical pdfs and remove the white pages? If so, how?

  I have Adobe Reader XI. Is it possible I can fix asymmetrical pdfs and remove the white pages? If so, how?

  Not possible with Adobe Reader.

• Script to search for text and remove the hyperlink and characterstyle link which applies (back to normal)

  I need help with my script to search for text and remove the hyperlink and characterstyle link which applies (returns the normal text).

  I can't do either as I want.  I want the user to be able to type in a dialog text they want to search for, do search this text IGNORING case (case insensitive) and then for all instances that he find it, remove character styles that are applied to the (set to [none]) and delete the hyperlinks.

  My code seems to define the character style [None], when I click on the text and look at the window of character Styles, BUT all old styles (font color, underline) are always applied and removed not as I want.

  Also, I can't understand how to remove all of the old links.

  Here is my code:

  myDocument var = app.activeDocument;

  var noneStyle = myDocument.characterStyles.item ("[None]");

  var myFindVal = "";

  var myErrorText = "";

  var myErrorCount = 0;

  myDialog = app.dialogs.add var ({name: "search user submitted text and delete hyperlinks from objects found.", canCancel: true});

  {with (MyDialog)}

  {with (dialogColumns.Add ())}

  {with (borderPanels.Add ())}

  staticTexts.add ({staticLabel: "search and delete hyperlinks for :"}); "})

  myTextBox var = textEditboxes.add({minWidth:100});)

  }

  }

  }

  If (myDialog.show () == true) {}

  myFindVal = myTextBox.editContents;

  doSearchAndReplace();

  app.findTextPreferences = NothingEnum.nothing;

  app.changeTextPreferences = NothingEnum.nothing;

  If (myErrorCount == 0) {}

  Alert ("done! ("Part of the links have been removed for: '" + myFindVal + ""! "");

  }

  else {}

  Alert ("last error: '" + myErrorText + "' & number of errors:" + myErrorCount);

  }

  }

  myDialog.destroy ();

  function doSearchAndReplace() {}

  app.findTextPreferences.findWhat = myFindVal;

  app.findChangeTextOptions.caseSensitive = false;

  app.findChangeTextOptions.includeFootnotes = false;

  app.findChangeTextOptions.includeHiddenLayers = false;

  app.findChangeTextOptions.includeLockedLayersForFind = false;

  app.findChangeTextOptions.includeLockedStoriesForFind = false;

  app.findChangeTextOptions.includeMasterPages = false;

  app.findChangeTextOptions.wholeWord = false;

  var myFoundItems = myDocument.findText ();

  for (i = 0; i < myFoundItems.length; i ++) {}

  myRemoveHyperlinkAndStyle (myFoundItems [i]);

  }

  }

  function myRemoveHyperlinkAndStyle (myFoundItem) {}

  try {}

  myDocument.hyperlinkTextDestinations.item (myFoundItem) .remove ();

  myDocument.hyperlinkTextSources.item (myFoundItem) .remove ();

  myDocument.hyperlinkURLDestinations.item (myFoundItem) .remove ();

  myFoundItem.applyCharacterStyle (noneStyle);

  }

  {catch (MyError)}

  myErrorCount ++;

  myErrorText = MonErreur;

  }

  }

  Hello

  Right, some hyperlink might be a pageItem...

  expand the 'if' condition with:

  If (myHyp [len].source.hasOwnProperty ("sourceText") &... content ==...)

  Jarek

• How can I select and remove the net football behind the goalie with Photoshop CS5?

  Hello

  Could you please help me with the next case. I have a picture of a football match and I want to choose and remove the net behind the football (soccer) goalkeeper. Do you know what is the procedure for the selection and removal of net, in "clear" of the lens showing only the goalkeeper under objective?

  Thank you in advance,

  Petar

  Product: Photoshop CS5

  Hello Petar,

  You're in luck. Photoshop CS5 is the first version to come with Content Aware Fill. You can use this to clear transparent objects, such as your net. Try to take a look at this video, that should help you to do exactly that: