Display calibrator Assistant - help please

Similar Questions

• When I started to update my iphone to ios 10 and watch 3.0, cannot already display the pictures of my watch. Logo of loading only. And he thinks it will take a hayss of 1000 years. Help, please

  When I started to update my iphone to ios 10 and watch 3.0, cannot already display the pictures of my watch. Logo of loading only. And he thinks it will take a hayss of 1000 years. Help, please

  Hello

  If the software on your watch is being updated, leave your watch and your iPhone until the process is complete (including the not remove your watch on the charger):

  Update the software on your Apple Watch - Apple Support

• I tried to erase and reset my iphone 6 s. But why is it taking so long? For more than 24 hours. Is this normal? The phone displays just the apple logo and wont open. Help, please. Thank you in advance.

  I tried to erase and reset my iphone 6 s. But why is it taking so long? For more than 24 hours. Is this normal? The phone displays just the apple logo and wont open. Help, please. Thank you in advance.

  Hello

  Follow the instructions here:

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• I forgot my password and got my iphone disabled after several attempts. its display to connect to itunes, but I am unable to connect to itunes too. How can I unlock my phone without losing any data? Help, please

  I forgot my password and got my iphone disabled after several attempts. its display to connect to itunes, but I am unable to connect to itunes too. How can I unlock my phone without losing any data? Help, please

  In short - you can't

  IF you have a computer with iTunes on which you did a prior backup - the phone will be recognized and iTunes offer todo backup before it clears your device - that - except if you know the access code the content cannot be saved

• How could a routine walk-run? Inside, Indoor walk or another run? I do this routine outdoors with Gps first so that I'm not kidding my calibration data? Help please and thank you!

  How could a routine walk-run? Inside, Indoor walk or another run? I do this routine outdoors with Gps first so that I'm not kidding my calibration data? Help please and thank you!

  Hello

  Choose indoor walk or run Indoor (it does not matter which) to an indoor walk-run routine.

  Even if Apple Watch does not currently offer as a workout interval training, choose one of these allows the most appropriate data sources (which are the same for market and short) to use to track your training.

  If walking or running, the accelerometer is used to estimate pace and the distance (allow your arms swinging naturally) as well as the frequency heart sensor for the estimation of calories burned.

  Run or walk inside will not affect your calibration data. Calibration is based on the GPS of the iPhone data and is only held during the outdoor walking training or race outdoors when the iPhone combined is taken along.

  More information:

  Use of the workout on your Apple Watch - Apple Support

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

• trying to connect to the PS3 online, my router is microsoft but the SSID is not displayed? Help, please

  Trying to connect to the PS3 online, my router is microsoft but the SSID (or our wireless network name) is not displayed!  Help, please!

  Jamie

  Hello

  1. What is the brand and model of Microsoft Router?

  If you use Microsoft MN - 700 router see link below and follow the steps.

  MN-700 Base Station Configuration Guide

  Download the guide and open page 3 that contains instructions for recording in the router. Page 16 has also the steps to configure the router to broadcast the SSID

  If in case you use a Microsoft MN - 700 router, I suggest you to provide exact model name to get more information about the issue.

  I hope this helps.

• The display has been turned and I can't figure out how to rotate standing back. Help, please

  Help, please

  Hi RobbyUtah,

  Try to press the ARROW keys to CTRL ALT (Alt + Ctrl + top or down arrow). You will get the normal screen. To disable this feature, you will need to click on start-> settings-> Control Panel-> Intel (display drivers) and disable access keys. or right click on your desktop-> properties-> settings-> Advanced-> Intel media Accelerator Graphics Driver-> Graphics Options-> access keys.

  I hope this helps.

• HP PC HDMI-> Sony Bravia HDMI = no display! Help, please!

  Hello

  I'm usually well informed about the connections for digital devices, but I'm completely baffled by this situation and would REALLY appreciate your response as soon as possible, thanks in advance!

  Problems - the following statement of what I've done:

  I bought HDMI - HDMI Cable to connect my model of PC HP A6355 Phenom 9500 Quad Core (which have a HDMI port) for Sony Bravia LCD HDTV (which of course also have Port HDMI!)

  I turned off TV and PC, then connect the HDMI cable to the two end to each device

  Turn on the PC and the TV

  I checked every singal channel AV and PC on TV - no connection regonised

  I checked my display settings and set it to lower the resolution and trying to replicate the monitor (still doesn't)

  Have no FN key on my keyboard

  I took off the cable from the PC and connect it to my HP laptop and it worked perfectly fine! (this is the part where it puzzle me most!) one thing I notice is when I connect the cable from the laptop on tv - display automatically to survey and ready for me set the appropriate resolution setting - he didn't do it on my desktop PC...

  Why?

  My HP PC is 32 bit operating system

  NIVIDA GeForce 8500 GT

  I also checked Device Manager to see if my HDMI port works on my PC, but there is no option to select HDMI (unless they have another name for it IE bus usb etc?)

  Help, please! Thanks again

  Hey there,

  I just want to say that I have now solved the problem...

  Apparently my Nivida GeForce driver is not updated, make sure that you update your regularly and you will have no problem!...

  A smile and a big smile on my face seeing now works!...

  Thank you even if no one answers, it seems content to my brain so that it works properly!

  Thanks again

• I accidentally turn off my WIFI! When I go to it says disable 'status' HP wireless assistant but no, where do see how to activate it again, can someone help please!

  hen I go to it says disable 'status' HP wireless assistant but no, where do not see how to activate it again, can someone help please!

  I went to something help I have and it says to reboot my laptop, press F10, then go to system configuration > integrated device options > LAN/WLAN switching > activate. I restarted my laptop and pressed F10 but it come with the system configuration...

  Hi you can access device manager and enable you WLAN, or simply more portable computers HP come with a button to toggle WLAN, please check the color of the light wireless button and press again to see if it changes color, if not you have successfully activated the WLAN again.

  You can also try

  1. Reboot the laptop.
  2. Press F10 .
  3. Enter the BIOS .
  4. Select Advanced options .
  5. Select the Device option , WLAN/LAN switching.
  6. Switch to Activate .
  7. Select save changes and exit .

  If you could tell the laptop model and the version of the operating system you use that I'll be able to give you more accurate and simpler measures

• Message received from "Disk full" so he was trying to install 2011.exe SRIM. I can see 933 GB of free space when I display the properties of the operating system (c :)) help, please!

  Original title: received message 'disk full '. I can see 933 GB of free space when I display the properties of the operating system (c :)) help, please!

  New computer - Dell Inc. 05DN3X (CPU 1), MS Windows 7 64-bit SP1, processor Intel Core i7 930 at 2.80 GHz, 6.00 GB Triple - Channel DDR3 @ 666 MHz, 977 GB Western Digital WDC WD10EALX - 759BA1 (SATA).

  Problem:
  Downloaded a program (32 MB) (SRIM 2011.exe) commonly used to work and tried to extract it to a new folder on the OS (C :) - received message 'disk full'.) I can see 933GB free space when I discover the properties of the operating system (c) - Quota is turned off.

  Have used the program mentioned above (SRIM.exe) several times before using different operating systems XP to work without problem...

  Help, please!

  THX

  Given that this was written in 2011, I'm sure you understood something at this stage. However, the post also has much a views, so I think it might be a persistent problem, so I'll post my solution:

  When I copied the file SRIM - 20xx.e in a folder of SRIM-20xx under Program Files, I had a "Disk full" error when trying to extract the files, even though I had a lot of space on my hard drive and without limits. After a bit of messing around, I like the solution is to move the SRIM-20xx folder on the desktop, and then unpack it. After extraction, which leaves you with a lot of seemingly useless files, double-click CONFIGURATION and the installation will begin appropriate. Installation will create a file under Program Files, there will be no need to make things happen later, simply remove the meantime extract the folder to your desktop computer.

• I can't use assistant wireless hp on my pavilion dm1 help please!

  I own a HP Pavilion dm1-LQ862PA #UUF, windows 7-64 bits, a few months ago, my HP wireless assistant not working with a screen saying "HP Wireless Assistant is not available. application is now closed. I ignored it because I can use internet then I discovered that I can't use bluetooth. I checked the Device Manager and there is no installed bluetooth. I can still use the bluetooth before the broken wireless assistant. Please help me thanks

  Have you tried to reinstall the wizard without wire of your recovery manager or support page?

  If you do not need instructions, post again. If reinstall you, uninstall your present. You'll find "Programs and features" in the control panel.

• LR6 print module image is displayed not only white canvas. Help, please

  LR6 print module image is displayed not only white canvas. Help, please

  Hi abelardo,

  Could you please try the following steps:

  (1) quit Lightroom

  (2) deleted my "Lightroom 6 Preferences.agprefs" file to the place mentioned in the article:

  Preferences and other locations of the file file | 5 Lightroom

  (3) restart Lightroom.

  (4) then check the print module.

  Concerning

  Sarika

• I can get to resize the display bar at the bottom right. It extends off the screen. Help, please?

  I can get to resize the display bar at the bottom right. It extends off the screen. Help, please?

  Irene

  Have you tried the resize in the window upper right button.  There are 3 buttons, we close the window one he minimized no date limit it and the other allows to switch between full screen and a smaller screen.  Click on the last one and see what happens.

• How can I display the Tamil fonts in Adobe CS6? Help, please...

  Hello

  I create a document in Tamil. Normally, I type in Google document. Then copy and paste into Word. It works perfectly.

  Now I create a poster in Adobe illustrator. I type in google and pasted into Notepad. It works perfectly.

  When I copy and past in Adobe Illustrator the police does not appear correctly.

  I have urgent need. Can someone help?

  I did a search on Google and found the following. But I am unable to find similar to Adobe Illustrator CS6 settings

  Thank you Ellis House. The issue has been resolved. Message from David that you pasted above was really helpful.

  In the preferences-> Type-> the text engine options I selected 'Middle East', unknown world that was "Southeast Asia", after the Tamil letters display correctly. Thank you very much...

  I saw another post that says that I need to enable view source option.

  http://helpx.Adobe.com/Illustrator/using/Indic-support.html

  Unfortunately, I don't have any option informant. My screen is different

  

  I have a few Tamil Born installed. When I tried to change the Tamil police source, it no longer works.

  I have another font called Larson. When I changed the character displayed in Tamil Latha police, but all spelling badly shot in Tamil.

  Help, please. Enjoy.

  Thank you

  Notes; I am new to Adobe illustrator, so if I made a stupid mistake, my applogies.

  You are out of luck in your version. Support for the Tamils was added in CC

  http://helpx.Adobe.com/Illustrator/using/Indic-support.html

  You could try

  http://www.WinSoft-international.com/en/news/ScribeDOOR-CS5.html

  (also available for CS6)

• I have e bay pages display correctly then changing automatically to one half of the screen to the left. Help please

  Your help please with my problem. Thank you.

  Try the settings > Safari > clear the history and data from the Web site. That could help.

  Can you identify some pages where this happens? I took a quick glance and the pages I saw seemed reasonable.