Satellite L675 - update BIOS crash

Similar Questions

• Satellite L500 - update BIOS crash

  Hello

  I tried to update my BIOS on my laptop because he suggested on Tempro, and now I wish I had not bothered.

  My laptop has now been updated for 3 hours at the programming stage 3 stage 37 on BIOS flash and is frozen it will not do anything.
  I know that I should not turn it off, but that gave it a try and even that would not work.

  It's just sitting humming and I do not know what to do with it.

  Any ideas would be great

  Thank you

  Hello

  > My laptop has now been updated for 3 hours at the programming stage 3 stage 37 on BIOS flash and is frozen it will not do anything.

  The update of the Bios takes several minutes to complete. It looks like that the Bios goes wrong the failure process. If you stop, you will get a blank screen. I even do not know what to advise you. You can wait, but I don't think it ends well.

  The bad news is that you have to go to ASp (SAV) and ask them to reflash for money. Unfortunately, there is no guarantee for non-Bios

• Satellite T135 - update BIOS 2.70 won't be finished

  I have a Satellite T135 Win7 running with an original BIOS that I'm moving to 2.70. I ran all the other software updates in Service Station (2.1.51) with no problems. but the BIOS downloads 2.7, initiates and cautions that I'll need to reboot (I select Yes to execute) and receive notice of popup on the electrical problem (defective DC) which corrects this BIOS, then nothing. It just stops.

  I disabled my firewall windows antivirus, but the update is still unable to fill. I downloaded the file directly from Toshiba (outside the Service Station) and run the file and exactly the same thing happens.
  The event viewer shows all the related entries.

  Anyone has an idea on how to get the updated BIOS up-to-date?

  Hi mwarwick,

  Did you install any new version of package of added value of the Web from Toshiba site? This program is necessary if you want to update the BIOS to check if you have installed the latest version.

  In addition I recommend you load the default settings in the BIOS before doing the update. Then, go into the BIOS, press F9 to load the default values, save & exit it.

  Can update you the BIOS now?

• Satellite L750D - update BIOS 2.1 and its problem

  Hello

  I have little problem. I was downloaded from your website 2.1 BIOS for Toshiba Satellite L750D (PSK32E).

  I have been updating BIOS 2.1 and start the problem with the sound. When I start the game, music or else minutes 2 first sound plays correctly but then it stops without reason. No noise at all. I've been reinstalled op system but the problem is still there.

  Sound works for 2 minutes only then is completely off. Each application to start with sound plays 2 minutes and stop all silent is. I did a probe on my laptop the mother she s a computer portable twin. I have updated bios same problem 2 minutes and then no sound. My OS is win 8 64 pro my laptop mother is with win 7 x 64 premium.

  Two BIOS updated ver 2.1 on L750D and the problem is the same. Please fix the BIOS.

  The BIOS seems to be very old. I was released nearly 1.5 years ago, so to be honest, I doubt that his and BIOS problem.

  I had the similar problem with my other laptop equipped with a Realtek sound card.
  The sound appeared after connection and remove the headphone jack
  But I could solve this latest installation updated audio driver the Realtek driver page.

  But it seems that your Satellite does not support Realtek audio chip but the Conexant audio chip.
  Therefore, the solution could not be useful for you.

  However, I think that you need to update the audio driver. I recommend you google for driver Conexant SmartAudio HD and test the latest version of the driver available.
  On the internet, I find the Conexant SmartAudio HD driver version 8.65.9.51 for Win 7 / 8 Win / Win 8.1
  Not quite sure if this is the latest version, but you can test it.

  To manually update your driver:

  1. go into the Device Manager (right click on my computer, choose manage and then find Device Manager in the left panel)
  2. right click on the device you want to update and choose Update driver software
  3. choose Select the location of the new driver manually and navigate to the folder where you downloaded the driver

• Satellite A300 - update BIOS 1.70 - WIN

  Update BIOS 1, 70-VICTORY-28/04/09
  Once again the same thing?...

  PSAG8E A300

  Hello!

  Can you please explain what you want?
  Once again the same thing? What you mean?

  Good bye

• Satellite L350 updated Bios to pad 2.1 and lost

  Hello

  As indicated above for the update Bios to 2.1 later I lost the functionality of numeric keypad, not the right side as if it were a good keyboard.
  The above keys work IE delete scroll etc.

  The numlock light does not illuminate, but it does if I activate the keys on the stretch main qwerrty.
  Is their any way to reload the bios it won't let me because I have the latest or downgrade may not be like that until anothrer update.

  By the wy am Windows 7 any info would be greatly apreciated thanks

  Hello

  Normally you press Numlock on the keyboard to enable it.
  Check this box!

  If it s not working do not you should load the default settings in the BIOS. Maybe it works.

  Last but not least just be sure it s not a hardware problem, can test you it with the factory settings?

• Update BIOS crashed Satellite L40 - 17Q

  I just did a bios update on my Satellite L40 - 17Q and after a reboot of the entire system just crashed... now I can't do anything, not even the bios does not start... I have a product recovery cd and the computer reads it but nothing more... someone can help me?

  In your case only the ASP will be able to help you!
  A few reasons your BIOS update failed and the module ROM was not flashed properly

  Ask your ASP for help.

  Good luck

• Satellite A300D - 155 (PSAKCE) - update BIOS crash

  Hello guys...
  Last week I updated my BIOS with the latest version of BIOS provided by TOSHIBA TEMPRO, and here is the link...
  http://UK.computers.Toshiba-Europe.com/innovation/download_bios.jsp?service=UK

  I've updated on Windows 7 x 64... but in the middle of its processes, flashing 4 BLOCK, it breaks down and now my laptop does not start.
  I used all the crisis-recovery procedures in the forums, with the Fn + esc to activate its crisis recovery Mode but when I tried them and flashed successfully, the laptop does not start always upward.
  I've used the flash drive, what does not work and I bought a USB - FDD and got a flash procedure successful but my laptop still does not start, same old white screen.

  Is there someone who could help me on the correct procedures in flashing this laptop? Because I need, my warranty expired last month, and the lack of power financial, I can't it to Service centers. Your help will be great help for me... PLS HELP ME.

  Thank you very much.

  Hello Mirage,

  I think you can do anything I want to say you have already tried the procedure of recovery from crisis but that s all what you can do. Normally this t shouldn't be done because you could destroy the whole ROM module

  Your only option is to contact an authorized service provider. I guess that the ROM module needs to be changed or reflashed. Don t worry guarantee, chess BIOS updates are not covered by the warranty then you will have to pay for it!

  Good luck! :)

• Satellite A210 - 1BW PSAELE - update BIOS crash

  Hello

  I have a problem with my A210-1BW
  I did last night a Bios Update, but winphlash hangs up during the update. I waited about 20 Minutes, but nothing happened.

  Then I killed the WinPhlash process and try again to update, but then get an error message. I try to restart and get the white screen. I turned off the laptop and close again on it, but now there are nothing but black screen.

  I already try the drive of crisis of Phoenix with the 2.0 version of the homepage of Toshiba BIOS, but not worked.
  Anyone know what I can try?

  And can someone send me to try an older version of Bios and then on the home page?

  Thanks for your help.

  Good bye
  MaximL

  (Sorry for my bad English, I'm German)

  The system will still boot from the CD?

  In the case where it doesn't start at all, there is little you can do. Re-flashing with the cd of the crisis is according to my knowledge the last possibility, otherwise you should better communicate with Toshiba service center. Maybe they can help you or fix the laptop (replacing the BIOS chip).

• Satellite P200 (PSB0E) - BIOS crashed

  Unfortunaly, I have crash of the bios for my laptop.

  I downloaded crisis recovery disk tools and I'm looking for the correct version of phlash16 tfor the Toshiba Satellite P200 to create the disc.

  Help me please!

  Hello!

  Updates to the BIOS on the Toshiba site are only Windows based so I think that it of not possible recovery BIOS yourself or flash in DOS mode.

  The only solution I see right now is a professional help from an ASP. Technicians can try to reflash the ROM module
  Here, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• Satellite A500 - update BIOS with dead battery

  Hi all

  I have a Satellite A500 (PSAR3E) laptop and I need to update the BIOS to the latest version.
  Unfortunately, my battery died completely, and I have no chance to get a working one.

  I was trying to update the bios all day, but no matter how I try (even created a boot back drive and took command line phlash16, /forceit and so on) it keeps telling me that he needs at least 10% charged battery present.

  How can this problem be solved?

  > If I remove the battery, engine update fails, say there is no battery present, if I fix the battery, then update will fail saying the battery must be at least 10% - but he died, this percentage is 0.
  And you write about original Win version that you have downloaded from the Toshiba BIOS download page and started in Windows?

  To be honest is unclear to me that there is a trick to avoid this situation.
  Maybe something stupid, but now, do you really need to install the update to the BIOS?
  Is there a problem with your machine?

• Satellite C660 - update BIOS stops on: project ID check failed

  Update 1.4 stops on: project ID check failed. I have the Satellite C660, BIOS 1.0 version.

  Thahx for help.

  Can you post more information please?

  What model of laptop you have exactly (C6660-xxx)?
  Are you using the original operating system preinstalled that you got with your laptop?

• Satellite L500D - update BIOS, covered by warranty?

  Hi, I bought a Satellite L500D in September of last year. The weekend comes, he suggested I should keep the machine etc. updated drivers so I logged on the Toshiba web site and there was a link with * New * Bios Update, i.e. After choosing the etc. good model from the dropdown boxes.

  The update seemed to work however when the machine is re-start, he went through the boot process closed however it has not started up.

  I tried to choose the boot in SafeMode etc and tried to reinstall the backup CD, but I can't get the machine to start. I have now put the machine in to authorized service center for Toshiba to fix.

  As I followed the instructions on the web site of Toshiba is that this should be covered by the warranty?

  Thank you

  Hello

  No, the update of the BIOS is not covered by warranty! This update happens on your own risk, and you can find this information on Toshiba Web site e too.

  I quote the Toshiba page:
  + Toshiba provides this information "such what ' without warranty of any kind, express or implied, including, but not limited to, the implied warranties of quality market or adequacy has a particular use. Toshiba shall not be liable to the topicality, accuracy, completeness or quality of the information provided. Toshiba is not responsible for damage caused by the use of any information provided, including incomplete or incorrect information. +

• Satellite A30 - update BIOS cannot access bios and no light to full charge

  Hello

  Like a fool I upgraded my bios (to 1.80) for Satellite A30 (PSA30E). I've noticed two problems.

  (a) during start-up I no longer get any what welcome screen and can not access the bios or boot from other devices - so if I want to boot from the CD now I can not - for example impossible to reinstall the operating system in the future

  (b) the battery suddenly was not fully charged and constantly hangs on 99% (apparently)

  (c) who knows what else could go wrong

  I'd like to undo what I've done, but it does not seem possible. How the hell can I solve it, since clearly the update of the bios is incorrect. Find a bios update file earlier (and how to use it)? Can I fix it?

  Someone at - it ideas?

  David

  Hello

  First may to ask why you have updated the BIOS. If everything works, the update of the BIOS is not necessary.

  OK, how have you tried to access the BIOS? Usually the F2 key must be pressed immediately after starting the laptop. You can try to press several times.

  But you can start from STRANGE on different ways. You can press C button and the specifications will enable booting from the drive or you press F12 and you choose the STRANGE as a source of start-up.

  I put t know why the power of the battery freezes at 99%, but you can try to remove the battery and wait several times. Then reconnect and check the status of the battery.

• Satellite L750D - update BIOS causing the CD Player problems

  I have a L750D-1GC Satellite running Windows 7. Recently I updated the BIOS to 1.60 04/05/12 THIS worm 1.40

  I noticed that since that more that I have problems my CD player in what I can read CD/DVD but does not burn. Using burning software, it appears the combustion happens (rotation of the disk and green light), but at the end it breaks down. I have tried several Microsoft Fixit program but the problem persists, help?

  I put t think that the BIOS update would impact on the functionality of CD/DVD drive.
  Usually, the firmware of the CD/DVD drive contains information about the compatible media and I put t that any link between this question and the previous update of the BIOS.

  For me is looks like the laser lens is dirty or the lens may not be properly calibrated to read/write from the disk
  Try to clean the laser lens with cotton wool trick and liquid alcohol in many cases this would set similar question and the player couldn't handle the media properly.