Display driver scroll during RDP connections

Similar Questions

• Can't map network drives via a RDP to Windows Server 2012 connection

  I have yet to find a definite answer on this topic, so I hope that someone will have encountered it here.

  Access us an application on a remote server of 2012 hosted through RDP connections in two different sites.  This application outputs files in a folder that I need mapped to Windows 7 PC local.  After the RDP connection, I go to Windows Explorer and you try to map a network drive using a UNC name, for example: \\IP address\D$ \folder name and check the box "use different credentials.

  At this point, what happens depends on what profile of I use.  If I use the profile that was created when installing Windows Server (admin profile) it works fine.  If I use any other profile, or another admin profile, it does not work, and I can't understand why?

  During the inspection, the two profiles admin seem to be the same!

  I know that I can map drives the other direction (take my drives mapped with me RDP) but this is not acceptable because several PC (on different sites) will be locally run software that needs a path set for the location of the files, that creates the remote app.

  Any advice will be appreciated.

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• I get an error message: The Nvidia OpenGL driver lost connection with the display driver and can not continue. Error code 8

  When I play the virtual Interactiver - Second Life Community. The screen turns white and windows tells me the display adapter stopped responding and has recovered. While the second life Viewer is still Virgin (white). I get the error in a box: The Nvidia OpenGL driver lost connection with the display driver and can not continue. The application must close. Please visit http://www.nvidia.com/page/support.html for help. Error code 8. Now, I worked with Nvidia to do a clean install of the latest version of the driver. a driver in safe mode installation. They suggested to try an earlier version of the driver. Nothing that they worked me and told me to see Microsoft. The pilot hangs every 30 min or so, all online in the second game of life. Can someone help me?

  Information System
  ------------------
  Time of this report: 13/06/2011, 19:40:20
  Machine name: BEN - PC
  Operating system: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110408) - 1631
  Language: English (regional setting: English)
  System manufacturer: HP-Pavilion
  System model: GC670AA-ABA a6120n
  BIOS: Phoenix - AwardBIOS v6.00PG
  Processor: Intel (r) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz (2 CPUs), ~2.0GHz
  Memory: 4096 MB RAM
  Available OS memory: 3582MB RAM
  Page file: 1690MB used, 5472 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  User DPI setting: 96 DPI (100%)
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 64 bit Unicode

  Two monitors

  Display devices
  ---------------
  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1600 x 900 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: G205H (Acer)

  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1280 x 1024 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: NEC LCD7V

  Hello

  I suggest that you have watch the following link below:

  http://forums.developer.nvidia.com/index.php?showtopic=5331

  I hope this helps.

• Driver NVIDIA OpenGL lost the connection with the display driver

  Laptop Alienware M14x

  Windows 7 pre 64-bit

  8 GB ram

  3 GB of video: NVIDIA GeForce GT 555 M

  Intel i7 2760QM

  AE CS4

  Æ keeps crashing. I get the following message while doing something as simple as scrubbing through the timeline, or change the opacity of a layer. 1080 p, I have a layer of the image, a solid, color corrections, and that's all. I just got this new computer, and I've never had this problem on my old computer.

  This message is displayed after AE blocks. "The driver NVIDIA OpenGL lost the connection with the display driver and can not continue. The application must close. »

  This message is displayed in the taskbar: "display driver stopped responding and has recovered. Display driver NVIDIA Windows kernel Mode Driver, Version 267.21 stopped responding and has successfully recovered"

  any ideas on how to stop EI do not cause my display driver to stop working?

  Thanks, Ramzi Rebeiz

  Turn off OpenGL in the AE preferences.

  Mylenium

• Display driver has stopped working during the game the Sims 3

  Original title: video card? With the Sims 3 ~.

  I bought the Sims 3 and downloaded yesterday. I have played since then, but then the game would freeze and tell me that this ialmrnt5 of display driver has stopped working. So I tried to fix it, and it did not work. Now, he tells me there is something wrong with my graphics card and Sims does not work yet. I keep going from one link to another tells me to download this and that and I don't know what I have to do. I want to be able to play my game, because it's expensive and I bought it only yesterday. Help, please. PLEASE, I BEG YOU.

  -Poprocks26

  I thought about it, are not even worry about this.

  I just needed an update from Intel. It works perfectly now. :]

• Portege Z930 - display driver does not work properly

  Hello

  We have a Portege Z930 with Windows 7 64 bit in use where the Intel display driver seem to work fine.

  First problem is the slow presentation on screen - if we open a (simple JPG) photo and move the window, the frame window break during the move and showed very weird.

  Then, we have installed a U3.0 dynadock docking for the use of two external displays more. This method works even worse. To the docking station, we used the driver from the CD supplied in the delivery and connect to a USB 3.0 connector.

  On starting switching on 2 screens instead of internally for computer laptop screen does not work - and we use workaround of using an extended desktop on all 3 displays (2 external and internal display for laptop as the third).

  In Internet Explorer, it should turn off GPU Rendering and use Software Rendering rather because otherwise, we observed critical irregularities on the external screens (with 2 Windows Open the screen froze or could not display Windows Mobile). However the display isn't satisfactioning.

  We have tried 3 different versions of the recommended Driver Intel which is also offered by Toshiba to download; We loaded it is there and also 2 versions more (a more recent, one older) Intel directly.

  So, how can we get this working properly?

  Thanks in advance and best regards,
  N. Cochems

  More importantly. Make sure you have Service Pack 1 installed Win7. New laptops have problems running in win7 RTM (without service pack).

  It seems that Windows uses the standard VGA driver instead of the Intel driver. Uninstall all display drivers from Control Panel-> programs and features and then go to the Toshiba website and install the utility Intel Chipset then the Intel display driver, then go to DisplayLink.com and install the latest DisplayLink driver for the dynadock. The new software v7.xx DisplayLink driver fixes several issues found in v6.xx drivers.

  Verify that the Intel drivers are installed properly in Device Manager.

• Qosmio G30-204 PQG32E hangs when you install the display driver

  Hello

  I have a PG32E Qosimo G30-204 age of two weeks.

  He has recently developed a graphical corruption as horizontal lines of thing that resemble lines of memory corruption. These either go away or reformed in another location when you scroll or move the page.

  The installed display driver version is 7.15.10.9759 and there is a newer version on the download page.

  Tried to install it twice and both times the machine froze during installation in a case goes blank after a refresh. In order to proceed was to remove the power and the battery from the machine. Then looking at Details of the driver after restart a normal life, even if the version number has changed the machine freezes at some point later, sometimes looking at the details of the driver or by opening a browser etc...

  In both cases I had to go to safe mode and use back driver to make the machine can be used (but always with graphics issues).

  Any suggestions?

  It is possible that the graph of problems occur only after the machine has been for a while, but again when they appear does not remove them.

  Leave the machine off for awhile remove them because they do not produce all the time so maybe an overheating problem?

  Kind regards

  Andy

  Hello

  I assume you mean the graphics driver for Vista. Am I wrong?
  I visited the site driver Tosh and compared to the Vista nVidia Driver version and surprise, surprise, there is a more recent version published on 23/04/07 and the version is 7.15.10.9813.

  Check this driver

• R400/T400/T500/W500: display driver "amdkmdap" hangs

  Summary: Lenovo ThinkPads with switchable graphics (R400, T400 and T500, W500) have problems of usability under Vista and using external monitors. More than six months, users have been plagued by frequent Windows crashes. During this time, Lenovo will not expressed complaints and reports available. The end of April 2009, Lenovo has solved a lot of problems by releasing a new official driver. However, several problems, including serious, remain as of today. Lenovo said to work actively on the issues pending (without results so far).

  Important information for users: If you experience any of the problems reported here, then Lenovo will advise you to call your local Lenovo support. Application that a case is submitted to engineering equipment. In particular, you should ask "a case CMVC to be created and degenerate". These "code words" ensures that your case be treated correctly.

  Old description of the problem

  On Vista 32 and Vista 64, the "amdkmdap" ATI display driver hangs when an external monitor was active before OR an application (game) using the DirectX technology is used. The user receives usually few messages called "Timeout detection and recovery" (TDR) of Vista:

  

  (Click here for an explanation of the message from Microsoft)

  Sometimes, amdkmdap falls down several times in a row. Then, Windows crashes with a so-called "BSOD", probably resulting in a loss of data. Generally, Windows detects "atikmpag.sys" as the driver to crash. Instant restart sometimes also independent from the front THAT TDR crashes. In such a case, no BSOD is displayed.

  The following video illustrates the phenomenon: http://www.youtube.com/watch?v=LBX9QsCmrpY

  Above this behavior has been confirmed for the following ThinkPad models: R400, T400 and T500, W500 (see below). Problem reports that symptoms are often related to play games or the laptop being docked and the external monitor connected via DVI.

  However, the presence of these two conditions is not necessary to trigger the accident to the driver:

  1. There are reports where no dock was involved and the external monitor is connected directly to the laptop VGA port.
  2. In addition, there are reports where the laptop is docked and an external monitor is connected to the DVI port.
  3. So far, there were no reports related to a monitor connected on the display Port that is available on some models. (Perhaps because this port is not used.)
  4. There are a few cases where a dock, or an external monitor was involved.
  5. Some games with reliability triggers the crash.

  Steps to reproduce

  While initially (around September 2008 - October 2008) the accident can be triggered easily, the situation is now (December 2008) more complex. Accidents happen again, although there is no clear model more. According to various reports, the crash of display driver can be triggered as follows:

  • The output of the mode standby
  • Watching a DVD.
  • Playing one of these games: Fallout 3, Bioshock, Team Fortress 2, Knights of the Old Republic.
  • Arbitrarily during the normal work. A normal working day, the problem occurs at least once.

  Other issues

  Here are several questions that seem to be related. More information can be found in other posts in this thread:

  • The laptop screen or external monitor works at a low resolution after the release of the standby mode.
  • After the connection, both monitors flicker when the screen resolution setting.
  • External monitors can be activated using Presentation Director.
  • The external monitor is empty after the connection or disconnection.
  • There are a few reports on the accidents of display driver on computers running Windows XP.
  • Switchable graphics drivers more than 2.5 GB RAM usable under Vista 32 (or 500 MB - 1 GB less than usual).

  Workarounds

  Lenovo has released a new "trick" document that provides a link to a new driver. Get it here , but be sure to read the instructions!

  (Old advice follow below the line. Think of them as obsolete.)

  ---

  Here are some tips that could make the problem happen less often. I have not tried all the. However, a. and b. have improved the situation for me; your mileage may vary.

  A. Si you don't have to use an external monitor, then move to the Intel graphics card for now.

  Otherwise:

  B. make a few changes to your system:

  • Disable Aero.
  • Create a new profile in the Manager of power supply with the following parameter: when running on AC, turn off the screen after 40 minutes. (And therefore, the laptop less frequently between standby mode.)
  • Install the latest graphics drivers.
  • Install the newest BIOS.
  • Install the latest Hotkey utility.
  • Install the latest drivers.

  C. disable switchable graphics in the BIOS setup and install the drivers from ATI modded (see zilla poster in this thread for instructions).

  The last solution (c.) has been confirmed to work reliably by several users. However, as a result, you use drivers that have not been tested by Lenovo. It is possible (but not likely) that damage the results by doing so. In addition, it may be difficult to install a Lenovo driver that solves the problems reported here. Finally, you cannot use the energy saving Intel graphics. Thus, you must use this workaround only if you know what you're doing.

  The programs can be downloaded from the following locations. Note that update system not always immediately offers you the latest versions.

  • R400 and T400 users: go here.
  • W500 and T500 users: go here.

  User opinions

  • "Is there the chance that this will be fixed, or should I just get used to my machine"post work-class"crashing regularly?
  • "I [am] thought on the point of selling my w500 if this problem will not be fixed in the coming weeks".
  • «I've got a T400 w / Vista 64 and I'll tell the switchable drivers on it S [*] K bad.»
  • "Unfortunately for Lenovo, our IT Manager is the point allocation of a new and rather important agreement company for the PC of our entire organization, which included a deployment of many new PCs for 2009." The contract would go to Lenovo. He mumbled something on HP when I asked him about the State of things with my PC... [O] your firm is responsible for COMPUTING decided to refer all the defective Lenovo for a refund and replace them with HP. »
  • 'It's a Lenovo person paying attention [?]
  • "I got angry with ati and lenovo.
  • "There are no new drivers and no ETA for a fix."
  • "ThinkPad is supposed to be good, so you would think that he would have a problem like this."
  • "honestly it's totally unacceptable that lenovo has done nothing this long. I paid extra to get the ATI card, and now I can not connect my laptop to an external monitor without it crashing. I've probably will eventually sell the laptop soon because using an external monitor is extremely important to me and lenovo seems not to care about the situation of fixing. »

  Update:

  -Lenovo support informed me today (2008-10-24), they are working on the problem.

  -changed topic (was: Major problems with ports, DVI and a T400) to take into account new information.

  -changed the message body in order to take account of new information

  
  

• Toshiba Satellite L850 - display driver problem

  Hello
  I have a Toshiba Satellite L850-1j9, (PSKG8E-02D00KCE), in collaboration with i7-3630QM and an AMD Radeon HD M 7670.

  The problem is, I'm not able to install the AMD display driver. When I try to install the software and drivers this problem appears: https://youtu.be/AOiPq8WVz_M

  The first time that I was using Win 10. I did the update to win 10 about a month ago and everything was ok until 4 days ago. I was working with my laptop with an external screen connected by HDMI and all of a sudden the screen started to Flash some green lines with a black background (something like you can see in the video).

  I saw on the internet that some people have problems making the update to wion10, I have installed new Windows 8 to see if has something related to win10 but the problem persists.

  I tried to install the intel CPU, a graphics 4000HD Intel GPU, but may not use it as a main GPU. I had this problem: "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  I need help please to understand what I can do to solve this problem. I took a peek on the internet and so far, I found a solution that could solve my problem.

  Thanks for your help.

  Hey

  any solution?

  Does anyone know if toshiba will make an update of the bios where I can change the graphics card? AMD to Intel...

• Error Win 7 - display driver stopped responding

  Windows 7, 32 bit, during normal use makes the sound of a detached USB device and then the screen goes black.

  After a few seconds the screen back again, but the computer responds to nothing; then the screen goes black again. This error message is displayed: "driver Intel Graphics Accelerator display drivers for Windows Vista (r) stopped responding and has successfully recovered."

  He has no option but to manually shut down the computer.
  I've updated the display driver and bios, but it happens still 3 to 4 times per day.

  Hello

  You have a Windows 7 preinstalled on your laptop

  But the error message means that:
  > Intel Graphics Accelerator Drivers for Windows display driver Vista (r) is no longer

  Seems to graphics card driver Vista is installed on Win 7 OS.

  Maybe you should remove the Vista display driver and install a graphics driver for Win 7.

  Welcome them

• Why is my Apple - Super Drive CD does not connect to my iMac?

  Why is my Apple - Super Drive CD does not connect to my iMac?  That was before I upgraded to el Capitan.  Now it will not allow CD insertion and the icon does not appear on my desktop.  However, the device is displayed in the Finder and seems to rest for more than 15 minutes, try to connect.  Any advise appreciated.

  try resetting the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• On the Satellite 2450-201 NVIDIA display driver

  I downloaded and installed the latest nvidia display driver for my laptop that has nvidia gforce 420 GB and I have install the driver was the 36,48 v when I start to the top of the poster are bad and we = hen I connect it says Error loading nview no nvidia hardware not detected on the primary monitor if you are running on nvidia card please make sure that it is configured to be primary. What should I do when I have the access control panel nevidia Office Manger and check the box that the message happens again then I restart and the graphics are fine, but after about 5 boot up it goes back to the graphocs rubish and message appears again.
  what I'll do!

  Hello

  Have you installed the driver for the Toshiba page?
  If so visit the Toshiba driver page and download the driver.
  It s not recommended to use NOT Toshiba graphics cards drivers.

  Then I recommend to check the display properties, if the screen of the laptop has been on the primary monitor. Mark the display with the digit 1 and check the option use this device as the primary monitor has been activated.

  Also, check in the Advanced tab nView option if the nView mode has been upgraded and that make the main display has been enabled for the screen of the laptop.

• Tecra 9000 display driver

  Hello

  I recently acquired a Toshiba Tecra 9000. I added a new 40 GB hard drive and installed Windows XP. The standard display driver does not allow me to connect an external monitor to extend my Windows desktop on 2 screens, so I downloaded the latest driver on this site. However, when I try to install the driver (S3 Graphics SuperSavage/IXC 1179) a hardware setup error appears saying this driver has not passed Windows Logo testing to verify the compatibility with XP. There is no other driver to select on the Toshiba site, so I installed the driver. At first, everything seemed ok, but today my laptop has projected Blue 6 times within the last hour. I've now uninstalled the driver and have not had any problems. However, because I have everything installed display drivers display is basic at best.

  No one else has this problem with the display driver for a Tecra 9000 with XP? Or anyone knows other drivers compatible with my model?

  Thank you

  It's very strange! All the drivers on the Toshiba download page are the same as the CD Utility & Tools.
  Is your TECRA 9000 a European model?
  Try using the driver CD tools & utilities. On this way, you'll be sure to use a right.

• Display driver stopped responding and has recovered

  Product: HP Pavilion dv7-6015tx Entertainment Notebook PC

  OS: Windows 7 32-bit

  Status: Clean installed Windows 7 Ultimate 32 - bit Windows 7 Home Premium 64-bit

  Hello

  I had several cases where the computer seems 'lag '.

  then, after a few flickers on my screen, Windows would give the error:

  "Display driver stopped responding and has recovered."

  There are still effects after this message.

  When dragging windows, scrolling top-down graphics etc. continue to Flash.

  This isn't all in hardcore, the GPU was not operating at high temperatures.

  Interestingly, I don't have this problem when I'm in the middle of hardcore games.

  The CPU was not under heavy load, the CPU was not working at high temperatures either.

  I checked the temperature with thermal control (HWiNFO32).

  I have a lot of resources, 1223MB of RAM to spare.

  I also have lots of HARD disk space too.

  I installed the latest version of the graphics driver for my product: AMD graphics driver high definition,.

  but the problem persists.

  Help, please!

  -John

  I understand your frustration, I had the same problem, I really did, for centuries!

  Try this:

  Do not go on the AMD website for a video driver. those who do not work properly for some reason any...

  Download on the HP site specific to your HP product, for example, I have a dv7 6015tx with 32-bit windows.

  Then I'd go to: dv7-6015tx drivers

  If you still have the drivers on AMD ATI Web site, uninstall them, restart.

  Go to the HP site where you can find specific drivers for your product HP, installation, restart.

  It seems trivial, but it's IMPORTANT and most of the time to restart after uninstalling and installing.

  It worked for me, hopefully it will erase your questions, good luck.

  -John

• Qosmio F60 - 10 H - newest need display driver

  Hello...

  Can someone help me? I have a Qosmio F60-10 with nVidia GT330M (1 GB), but I have serious problem.
  I want to play newer games, but I can't. For example, Battlefield: Bad Company 2, I played it, but it's unplayable.
  Accident of textures. During the reading of defective TV game textures like tasks and forms black or gray.
  Sometimes defected area gel. I have a problem with the more recent, not older games like Battlefield 2, CS, Medal of Honor: Airborne.
  Does anyone know a newer driver than 187.98 for nVidia GT330M? Or Fix?

  Help, please

  THX

  Qosmio F60 is newest laptop and it isn t available in the world and you already have the problem with the display driver. It s crazy.
  I doubt you'll find a newer driver on Toshiba support page so all you can try is to install the NVIDIA driver but I do not think that it won't be so easy.

  Problem is that the F60 Qosmio's newest model of laptop and there is no reports about similar issues.