Display has stopped working on printer Envy 110

Similar Questions

• Equium A100-338 display has stopped working

  Hello

  I have exactly the same problem on my Equium A100-338 loaded with Vista.
  The display has stopped working (he went to a poorly lit black screen) after I had rebooted my machine even if the computer and the hard drive seems to work Ok with the lights on. I tried the usual elimination of power and the battery and restart it tricks, but after initial success it has stopped working after a few weeks.

  Once I had the computer operation that I only closed it down in the mode 'sleep', and he continued to work for a month until that he should be released after a windows update. I then plugged an external display and use of the Fn + F5 key got the external display running.
  Low and behold, the screen of the laptop started working again as if it had been "energised".

  I took what the laptop screen was OK and that he would not need replacement.
  The laptop worked OK until it needed to restart another when the unrest started again. The screens are gray on the monitor and the laptop now.

  These problems seem to point to a flaw in the display driver or VGA card, have you received updates or suggestions?
  Now, I bought another laptop Toshiba Satellite to connect to the forums trying to find out if my original computer can be repaired
  These problems seem to be quite common on Toshiba computers.

  Any help members would be welcome.

  > These problems seem to point to a flaw in the display driver or VGA card, have you received updates or suggestions?
  For the most part a graphics card driver must be reinstalled or updated to a newer version it can also be a problem of OS which means that the new facility could help
  But try to update the display driver

• Display has stopped working on Satellite A300

  Hi guys,.

  I have satellite a300 PSAg4a - 02500 m laptop. All of a sudden the display has stopped working on the laptop. I tried to plug in an external display, but it does not work also.

  I can't even see the bios screen not. Laptops normally, I hear no beeps during startup, just the fact that there is no display.

  This laptop has a M86 ATI graphics card 512 MB. Its out of warranty.

  All had a similar experience. Is it possible to know what could be the problem.

  Any suggestions would be helpful.

  Thank you

  Hey Tama

  I'm afraid there is a problem of serious material with your laptop from m.
  I like the graphics card problem.
  Usually if the internal screen would be defective, you should see all the external display. This is why I think you GPU is affected.

• Aspire 8942G. The on screen volume level display has stopped working.

  When I use the wheel of volume on the keyboard, I would see a numerical value on screen from 0-100 indicating the volume level.  It has stopped working.  The volume and the volume in the taskbar icon work properly.  Any ideas on how to solve this problem?

  Update: I found that the problem was a change of setting in Norton 360.  He is currently working.  Thank you!!!

• HDTV display has stopped working after the installation of El Capitan

  After the upgrade to El Capitan, the already functional and unproblematic mirroring the display of my iMac OSX for Panasonic HD TV has stopped communicating and the TV screen is blank! There is no options available when you select Preferences / display. No settings have been changed for Mac or TV before too, or after the upgrade!

  Hello Macthewife,

  Thank you for using communities of Apple Support.

  I see after update to El Capitan, you have problems mirroring to a HD TV. I suggest the following article to ensure that it is configured correctly and in the "Get help" section, there are a few suggestions if this does not work properly after installation.

  Use AirPlay to view a video of your Mac on a HDTV

  Best regards.

• Satellite Pro U400 - 150 - display has stopped working

  Hello guys,.

  yesterday I used to turn on my laptop (Satellite Pro U400 - 14) and it worked fine but after 1 minute my screen stopped working. I tried to restart the PC, and it worked OK again. But I turn on my laptop today and it didn t work at all. Everything is OK, PC works fine, everything is good, but only the display is black.

  I Don t know what happened with my laptop. :/

  Is there anyone who knows the answer to this problem?

  Thanks for all your answers.

  > Everything is OK, PC works fine, everything is good, but only the display is black.
  Of course, this isn't all right if nothing appears on the screen

  Connect an external monitor to check if you would be able to see something on the screen?
  Do this! Usually you should use the FN + F5 to alternate between the monitor internal and external.
  If this is not possible and nothing could be seen on the 2nd monitor, the graphics card problem can cause this.

• OfficeJet Pro 8500 a: menu display has stopped working

  I just tried to make a clean print head but cannot go beyond page 1 of Setup have a few days ago.  Can anyone suggest a solution please?

  Hi@rprescott23,

  Thank you for the HP. 's Support Forums Best platform for all kinds of solutions, tips and settings for your questions/problems.

  For the best experience on HP forum, see our Guide to HP Forums to learn more.

  Display problem on the printer. Is this fair?

  I would definitely help.

  I recommend that you follow the steps below and check if that helps.

  • Unplug the power cable from the back of the printer when the printer is on.
  • Then without connecting the power cable, press and hold the button for 15 seconds.
  • While holding the power button, plug the power cable and keep pressing the power button for more than 5 seconds.
  • IF the printer is not powered, restart the printer manually and check if that helps.

  Hope this helps

  Resolv_S

  Happy to help you. I work for HP
  
  Please click on " ""Accept as Solution " " " if you feel my post solved your problem, it will help others find the solution.
  Click on the " Bravo Thumbs Up" " " to say 'Thank you' to help! "

• Why has my shift caps lock and number lock display has stopped working

  I have windows 7 for only a week.  When I started if I pressed caps lock number I had a view of a padlock, locked or unlocked, it disappeared, help please to restore

  Hi Mike

  The behavior you have described is a feature that is installed by the computer manufacturer. This isn't a feature that is installed by windows.

  Please contact the online support for your computer manufacturer.

  If you let us know the number of brand and model of the computer, we can help you find information.

  Let us know.

  Concerning

• HP Envy 5530: My scanner has stopped working

  My scanner has stopped working - it prints ok. I tried print & scan doctor to solve the problem but so far no luck. When conducting diagnostic tests, it gets stuck on check disk for hours and is unable to perform the full audit. I tried everything without success. Some of the messages I got: communication scanner cannot be established - inaccessible scanner. I tried enabling, but no effect. Please help me I am desperate.

  My scanner has stopped working

• OfficeJet Pro 8500 has more: back two has stopped working

  Two sides priting has stopped working. Print both sides "checked" but print dialog shows released a face on two sheets or "layout" began to show "long edge binding" as GRAYED OUT. Any ideas please?

  Hey @mossy21,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I see that you have options with double-sided printing to your Officejet Pro 8500 at more of your Mac 10.10 system. I can help with that.

  Here's what we will try to solve this problem:

  1. Go to your Apple icon, system preferences, printers and Scanners.
  2. Hold down the command key and click on the image to your printer on the left.
  3. Click on reset printing system.
  4. Go to Applications, utilities, disk utility.
  5. Click "Macintosh HD" on the left.
  6. Click on verify disk permissions. This should take about 10 minutes.
  7. Click on repair disk permissions. This should take about 10 minutes.
  8. Restart your Mac.
  9. Return to the printers and Scanners.
  10. Click on the button "+" at the bottom left.
  11. Select your printer.
  12. Next to the line indicating the use, click on the box and click on the name of your printer in the list.
  13. Click on Add.
  14. Try to print.

  This should allow you to print double-sided.

  If this solves your problem then please let other users of the forum know clicking on accept as Solution below my post.

  I hope this helps and I hope you have a nice day!

• OfficeJet Pro 8600 Plus: double-sided printing HP8600 has stopped working

  My HP8600 911 g printer double-sided printing has stopped working. Duplex accessory is still in place. Forum told to go into system preferences, open print queue and click on the driver tab. There is no driver tab. Just, it displays 'Driver 2.0' and does not give me the option to change this.  Don't know why? Duplex to work properly and now it doesn't. Any help would be greatly appreciated. Thank you!

  Hello

  I guess you can use AirPrint driver seeing your description.

  If please, try to add the printers printer & scanner, this time, click the use drop down and select the model of the printer default AirPrint option instead.

  Now check these settings and try to print a double-sided work again.

  Shlomi

• Sharing printers has stopped working for me. MacBook Air "think" printer is not connected.

  Sharing printers has stopped working for me. I have an Epson Stylus Photo R340 connected by USB to my Mac Mini end of 2012, and until recently, my MacBook Air has been able to print to it. Now, he 'thinks' the printer is not connected. Computers are on WiFi. Both computers have an OS X 10.11.5 now and the latest driver of Epson printer. Printer sharing is enabled in preferences, sharing, and "Share this printer on the network" is checked in the preferences, printers and Scanners. I went through the hoops to remove the printer and add it again on the Mini and the MacBook Air.

  Of course, the Mini prints very well via USB. Someone has an idea (that I have not already tried) how to get the sharing of printers to work again?

  Other sharing services work, such as the file and screen sharing?

• Satellite M50D-A-10W - display driver has stopped working while gaming

  Hey guys I just bought a toshiba Satellite M50D-A-10W and I have a very annoying problem...
  When I play in dota 2 sometimes I get a massage like: "display driver has stopped working" or answer

  I remember exactly, and the freezing of the game and then screen I need leave the game and reconect. If you can help me guys, I'll be very grateful

  Rare Hi

  This message is certainly created by the installed graphic card driver.
  I can't say for sure why this happens, but I recommend you to reinstall the graphics driver.
  In most cases, this should fix problems with gambling.

  Greetings

• HP CSI Shell has stopped working - cannot install the printer driver

  I just bought a printer LaserJet MFP M127fw Pro, but the installation of the pilot program still crashes. I tried 3 different modes of driver installation: the installation CD install HP Smart (USB) and download online, but I keep getting the same error.
  
  10-15 seconds after I start the driver installation, a pop-up Windows appears, advising me that:
  "HP CSI Shell has stopped working".
  
  I called HP customer care and they post in the computer section of the Support Forums.
  
  Does anyone have a solution to this problem?
  
  I have a HP Media Center PC with Windows 7 64 bit.
  
  

  Update:
  
  I tried the feature "Add a printer" windows default in Control Panel, and my printer is finally functional - only when used wireless. However, if I connect the USB cable from my printer, it will be recognized as a different printer and always unsuccessfully installed the drivers for it.
  
  If it works wirelessly, it is good enough for me.

• Can't print Photosmart C5280. Error "object GPCore COM has stopped working and was closed".

  I have problems printing my Photosmart C5280 All-in-one on my desktop of Windows Vista 32-bit. I felt for a few years and have only recently met this issue. A few months ago, I set up a home network so I could print from my Toshiba laptop. The printer is connected to the computer via a USB cable and the laptop is connected via a Bigpond Modem/Router which is connected to the desktop via an ethernet cable. More recently, I have also configured for my son to be able to print from his HP laptop. Initially, we were able to print from any computer. The two paltops are running Windows 7 64 bit. However, in recent weeks, we noticed that we were no longer able to print from a laptop, and a few days ago, I was unable to print from the office. When I try to print from the office, the print job seems to go to the print queue, but is then removed from the queue. I then get an error message

  "GPCore COM object has stopped working and was closed".

  
  

  This applies to all applications even the test print. I just went through the steps on the HP site, including downloading and execution of printing HP troubleshooting and doctor Scan and uninstall then reinstall the printer. I'm a bit of a novice at the side Computer Hardware and wonder if there is anyone out there who has had a similar problem and found a solution. Any thoughts would be appreciated.

  Hello MikeF48,

  Sometimes to do a simple uninstallation / reinstallation is not do the trick, and we try to remove all the software from the computer completely. Most of the drivers available at HP have a scrubber utility that removes all traces of the software on the computer and allows you to reinstall the software fresh. We should start there and see if that gets us running.

  I recommend you to do all this on the Vista machine. Once we have a working computer we can then pass from there to other laptops.

  Here are the instructions to use the tool of the scrubber. There are two sets of instructions, one for if you have installed the drivers from the HP website or if you have installed the drivers from the CD that came with your printer. Follow the instructions for your installation accordingly.

  Of the Original installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/
  9 download drivers and full software features
  Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
  10. run the download to reinstall the printer
  
  If the software has been downloaded and extracted to your system:
  1. type % temp % in the field of race
  2. Locate and open the folder starting with 7z (example: 7zS2356)
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/
  9 download drivers and full software features
  Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
  10. run the download to reinstall the printer

  After having uninstalled the software and did a reinstall of fees. Let me know if the problem is still the Outlander.