Display in a field as a decimal number in another area

Similar Questions

• Expand the vertical height of the field with respect to max of another area

  Hello
  I have oracle 10 g R2 reports, I have several reports where some objects in columns/fields height/vertical size increased automatically because it contains more data then the defined size so far it's Ok but when a field size increased another size of fields remains the same that we have defined the design so time in this case , it is ugly because in my report all fields with black border, how can increase the height of all other objects of size maximum, or even as the size of the image (because when a size increase field size will increase automatically).
  
  Thank you and best regards,
  Khawar

  Hello

  Seems that if you use the field borders.

  Instead you can use the borders of the respective frame and for vertical borders, you can add vertical lines and define the "* section of line with frame *" the respective framework for the property.

  I hope this helps.

  Best regards

  Arif Khadas

• generate the signal of decimal number

  Hello

  I have a program that calculate the heart rate from the ECG signal. I want to show the beats per minute on a graph with 60 s of the plot of the story.

  Since the vi who calculate the heartbeat I get output the string with the number, only when the wave of the tip, then I convert it to a number and then I place the offset of a simulated DC signal.

  (In the table below the beats per minute are always 60 because I'm simulating a sinusoidal signal with 1 Hz).

  ------>

  It works fine, but I'd like to see not the summits but a continuous line from one point to another, such as interpolation.

  in this case, it would have been a horizontal line to 60 BPM.

  I thought to store the last value of the chain and keep it frozen until the next update of value.

  Do you have suggestions on how to do it?

  Concerning

  Not clear what you get in the form of numbers, seems that you get too many zeros, and you get a decimal number or another 'dynamic '? value?

  You pulse-rate information could be ~ 45 to > 180 values per minute!

  You display the exact story of a minute?  Maybe (keep the last ~ 300 values with timestamps and use an XY diagram) a graphic story can be configured to display

  wait... Here's one way:

  I fed a chart (with 256 points in history), with a waveform. the wfrm has only a single value in the array of values and a t0. The chart is configured to display the 60 sec.  Seems to work

  My simulation will display a min rate of ~ 45 BPM, but you can beat him

  

• I want to restrict a field to a positive number (dollars and cents) with decimal.

  I want to restrict a field to a positive number (dollars and cents) with decimal.  The maximum length of the field should be 15 characters, including decimals as 999999999999.99

  I need a script?

  Thank you

  Gaul.steve59

  Lol the Format of the field value number and you will be able to specify the interval of values (0 - 999999999999.99) in the validation tab.

• Need a script to display the hidden field if number = 568845

  Hi all

  Using Acrobat Pro 9.1 on iMac with OS 10.6.8

  I am working on a form to fill out and need a script to display a hidden field when a button is clicked.

  I've set up a numeric field to type a number, and the hidden field is "text1".

  Now, I need a script to the button open only the hidden field, if the field number = 568845

  In this way the customer can fill in the code and then show and type in the field.

  Any help would be appreciated.

  Ron

  Given that you use it by a button, you can't use event.value because a button has no value, and in any case, you want to check the value of another field. So this place like your button MouseUp event (of course, you have to adapt the name of the text field...):

  If (this.getField("Text1").value == "568845") {this.getField ("Hidden_Field") .display = display.visible} else {this.getField('Hidden_Field').

  display = display.hidden}

• Displays the decimal number

  Dear All;
  
  I just want to get a decimal number (i.e. 2.5), I tried the mathematical functions, it has not solved the problem.
  Is there another function that returns a decimal numbers. ?
  
  
  Thank you;

  In the case where what you mean is you have found values in the path of 2.66666667, etc. and want to round down to 2.7, that can be performed as follows:

  var pH:Number=Math.round(140*(-ySlider/550)) / 10;

  Essentially, you multiply the value by 10, round, then divide by 10.

• Result of the calculation were separated to the whole and decimal, number not rounding correctly

  I have 2 fields as a result of sharing: the whole and decimal number (1 decimal place). I Math.floor the result to get the whole number and everything is fine until I hit a case where the result is 92,97.

  This should give "93" in the whole of the field and '0' in the decimal field, instead it gives me '92' and '10' (even though I'm only hosting 1 character in the field).

  How can I get the '93' and '0' in the following code?

  fieldLVEDV = this.getField("LVEDV").value;

  fieldBSA = this.getField("BSA").value;

  If (fieldLVEDV! = "" & & fieldBSA! = "") {}

  totalLVEDV = this.getField("LVEDV").value + ((this.getField("LVEDVDec").value)/10);

  calculation = (totalLVEDV / fieldBSA);

  calculationDecimal = calculation;

  partWhole = Math.floor (calculation);

  if(partWhole <0) {partWhole =' ' ;}}

  this.getField("Index").value = partWhole;

  this.getField("IndexDecimal").value = Math.round (10 *(calculationDecimal-partWhole));

  {If (this.getField("IndexDecimal").value = '10')

  {

  this.getField("Index").value = partWhole + 1;

  this.getField("IndexDecimal").value = "0".

  }}

  } else {}

  this.getField("Index").value = "";

  this.getField("IndexDecimal").value = "";

  }

  I thought I'd add the blue part would do the job, but obviously it did not work.

  Ah, your problem is that you do not use the correct comparison operator. To check if two values are equal, the operator is "==" not not "=". Using "=", you assign the value 10 to the field which you then pass in 0 a few lines down. Use 'is' and things should work correctly.

• I have 3 domains. A field is a constant date mm/dd/yy. The second field is a digital number (1-120) and can be changed. The third field calculates two fields 1 and 2 in the summation and shown in mm/dd/yy. How do I calculate that in the script?

  How do I calculate that in the script? I have 3 domains. A field is a constant date mm/dd/yy. The second field is a digital number (1-120) and can be changed. The third field calculates two fields 1 and 2 in the summation and shown in mm/dd/yy.

  You searched for ' add days?

  You must write a custom for this JavaScript calculation because you cannot add a number any date. Also the date strings are not just a number, even if we can convert a given date in a number for that date that represents the time form a date date (Epoch). Witn this value, we can achieve them all kinds of date calculations and collect a little information about the date. JavaScirpt uses midnight on January 1, 1970 UTC for starting point or the date of the time. Its value is zero, and every millisecond increases the value of 1. When a date string is converted to the date object JavaScirpt we have access to many properties of the date and can use several methods to extract information or adjust the date object.

  Field 1 is in the format "Date" with a format of "mm/dd/yy".

  Field 2 is in «Number» format with 0 decimal.

  Zone 3 is in the format 'None '. The custom calculation script applies to the formatting.

  The custom for JavaScript calculation area 3:

  var cField1 = this.getField("Field_1").valueAsString;

  var cField2 = this.getField("Field_2").valueAsString;

  Event.Value = "";

  If (cField1! = "" & cField2!) = "") {}

  Console.println (cField1 + "" + cField2);

  calculate that if we as no null data;

  var cDateFormat = "mm/dd/yy";

  convert start date date object.

  Kai var = util.scand (cDateFormat, cField1);

  get the date of the month;

  David var = oDate.getDate ();

  Add field 2 number of days;

  David = Number (nDate) + Number (cField2);

  of being updated for the new date.

  oDate.setDate (nDate);

  Set the field to update formatting;

  Event.Value = util.printd (cDateFormat, letter);

  } / / end of data not null;

• Delete zero balances in calculated fields and zero decimal points

  Hello

  I found the right java script to remove the balances of zero in calculated fields, but also, so I have to remove the two decimal points.  Can I work on what I need to add and where in java script so that it works?

  Thank you

  Nicole

  If you don't want to show any decimal places, this means generally that you want to round down to an integer. To round to the nearest integer, you could modify a single line of script in the Format:

  AFNumber_Format (0, 0, 0, 0, "$", true);

  and the same for the script of the hit. Note that this does not change the actual value of the field, it doesn't change what is displayed in the field. This is important if the value of the field is used in a calculation or exported, since it won't be the same as what is displayed. To change the value of actual field to round to an integer, it is usually best to use a custom validation script.

• Enter a decimal number

  I'm having a problem of construction of the line "input" to ensure that the user can enter an integer or decimal number in form-> table cell, but not all the other characters.

  When I use the type = "number" as below, the user can enter a decimal places but gets a warning 'only an integer' to submit.

  < td > < input type = "number" name = <? PHP echo "id_". $i? > id = "<?" PHP echo "id_". $i? ' > ' value = <? PHP echo number_format($bev_row[$i]['new_qty'],2)? > > < table >

  Thanks for any help.

  Tom

  The default step for an input number element value is 1. To allow decimal values to be entered into a numeric field, you can assign the step attribute to "any" or a decimal value.

• print the decimal number

  Hello

  I am trying to print the decimal number, but I've always had the decimal number (between-1 to 1) witout '0' or '-0 ".

  Var num:num = 0,235

  MsgBox (num)

  her impression: ".." 235.

  Thank you

  Hello OzShimon,

  It's weird, I just tried your code and get this result:

  

  I noticed that this behavior can be changed in the configuration "Regions and languages" of Windows. In Windows 7, it's this dialog box:

  

  If I change the settings of this dialog to any of the zeros, the result is the same as you have described.

  Can you check your Windows settings and confirm that yours looks the same as mine?

  Best regards

  Otmar

• How to test if the rest is a decimal number or an integer?

  Hi guys!

  I want to check whether or not my rest of two integers is a decimal number. Also, if it is a decimal number, I wana it allows to do a thing and if its an integer, I want her to do something else. How can I do?

  Help, please!

  Thanks in advance.

  Craster.D wrote:

  The task is to divide two numbers X and Y and a LED lights up if the result/rest is a decimal number. It can be higher or lower than 1, is not serious. If it is not a whole number, the LED should light.

  Great looks that you know exactly what you want to do, which seems to be the problem?  You will find the functions you need in the digital, boolean and comparison scheme.

• Convert a decimal number to a string

  I work with a gas mixer and I try to transmit data rates. The mixer takes only decimal values, for example, if you want to 2500 cc debit you must pass it 2500.0. I tried to use the function of decimal string number and do a type cast but I get an error every time machine. The only thing that works is by using a control of the chain and entering the value, but I would like to do it with a digital command. Someone at - it tips or advice?

  

  Note that you have provided only a sample size. In addition, 2500.0 isn't a decimal number, it is a floating point value.

  It is also not clear if how you talk to the machine. You said that you used a Type Cast. For what? How do you communicate with the machine?

• How can I display the last field added to the Manager (bottom) and keep the scrolling feature?

  Issues around scrolling on managers of blackberry is a real headache.

  I would like to be able to add fields to the bottom of a Manager and have this field displayed on the merits without taking the focus to another control.

  I'm looking for something similar to how works the yahoo chat window, for example.

  I was not able to get the last label field added to the box to display.

  Here is the code relavent I have:

  
   //adds a labelfield and a nullfield to the display    public void update()  {     UiApplication.getUiApplication().invokeLater( new Runnable()        {            public void run()            {             try               {                 scrollingWindow.add(new LabelField("Hello1" + count) );                   //add nullfield to facilitate scrolling                   NullField nullField = new NullField( NullField.FOCUSABLE );                   scrollingWindow.add(nullField);                   count++;              }             catch( Exception ex )             {                 Dialog.alert( ex.getMessage() );              }            }        }); }
  

  Any ideas?

  Couple of quick things:

  (1) you can make your LabelField focusable and save adding the NullFields

  New LabelField ("Hello1" + count, Field.FOCUSABLE)

  (2) have you tried to discover what field has focus, then set the focus on your new field, and then reset back to that he originated from?

• Custom message for: must be a signed decimal number consists of zero, one or more digits

  Hello

  We have an InputBox mapped the attribute type EO BigDecimal. Whenever the user enters special characters other than digital Gets the error message below.

  < af:inputText id = "it2" value = "#{bindings." Number.inputValue}.

  autoSubmit = columns '10' immediate = "true" = "true".

  Binding = "#{pageFlowScope.ServicesBean.numberInputText}" >

  < / af:inputText >

  Error

  Part r2:0:it2: "/" must be a signed decimal number consisting of zero, one or more digits, which can be followed by a comma and the fraction.

  Tried to add the custom resource group error message as shown in below, but no use.

  javax.faces.converter.BigDecimalConverter.DECIMAL=Summary - BigDecimal conversion error
javax.faces.converter.BigDecimalConverter.DECIMAL_detail=Detail - BigDecimal conversion error

  Is it possible to give the personalized message?

  JDev Studio Edition Version: 11.1.1.6.0

  Thank you

  Bhaskar Pola

  Following this article and the problem solved.

  Customize the validation error message in JSF 2.0

  Thank you

  Bhaskar Pola