Display list point & populov off when clik on edit icons in 4.2

Similar Questions

• Display does not turn off when attached to the ear during a call

  When you hold my iPhone 6 up to my ear during a call, the screen is not turn off and disable the buttons. The sensor is not broken, because the auto brightness works very well. It is just inside the calls when he won't work. Is there a setting to turn off the screen when you hold it to my ear?

  JBS - GUY says:

  When you hold my iPhone 6 up to my ear during a call, the screen is not turn off and disable the buttons. The sensor is not broken, because the auto brightness works very well. It is just inside the calls when he won't work. Is there a setting to turn off the screen when you hold it to my ear?

  The proximity sensor and ambient light sensor are two different things. The fact that your ambient light sensor works you says nothing about the functioning of your proximity sensor.

  You get a deal on the phone? A screen protector? If so, remove them and test again. If the screen does not always dark, you may have a hardware problem.

• Exception of null on the list pointer implementing values when there are n rows in the table

  Hi Experts,

  I use JDev 11.1.1.7.

  I have a VO that I defined a LOV with no search box. In my page, I've added it as af:inputListOfValues, but when there is no rows in the table that I will meet with NPES

  < AdfcExceptionHandler > < handleException > ADFc: when Manager application exception exception handling threw a new exception.

  java.lang.NullPointerException

  at oracle.jbo.uicli.binding.JUCtrlListBinding.findOrCreateLOVDialogIteratorBinding(JUCtrlListBinding.java:5188)

  at oracle.adfinternal.view.faces.model.binding.FacesCtrlLOVBinding.getSearchBinding(FacesCtrlLOVBinding.java:204)

  to oracle.adfinternal.view.faces.model.binding.FacesCtrlLOVBinding$ ListOfValuesModelImpl.getSearchRegion (FacesCtrlLOVBinding.java:2001)

  to oracle.adfinternal.view.faces.model.binding.FacesCtrlLOVBinding$ ListOfValuesModelImpl.getQueryModel (FacesCtrlLOVBinding.java:1612)

  to oracle.adfinternal.view.faces.renderkit.rich.SimpleInputListOfValuesRendererBase$ InternalLaunchPopupListener.processLaunch (SimpleInputListOfValuesRendererBase.java:1560)

  at oracle.adf.view.rich.event.LaunchPopupEvent.processListener(LaunchPopupEvent.java:108)

  Excerpt from JSFF:

  < af:inputListOfValues id = "xxx" popupTitle = "" search and select: XXX ""

  simple value = "#{pageFlowScope.SearchBean.xxx}" = 'true' "

  model = ' #{bindings. " XXXLOV.listOfValuesModel} "columns ="30"

  searchDesc = "Select XXX" >

  < / af:inputListOfValues >

  PageDef:

  < listOfValues StaticList = 'false' use = "LOV_XXX".

  IterBinding = "XXXIterator".

  ID = "XXXLOV" / >

  Is - this bug?

  Surprisingly, it works very well if there are lines in the table that the VO is querying.

  -Soham

  Soham,

  I think you just create this LOV page by simply moving the VO, right?

  You can select the box to tick 'Include no. Selection' in your VO, and see if that helps?

  

  See you soon

  AJ

• Display the Properties dialog box when you click the icons on the desktop, but does not work

  I use windows vista. This morning after a normal start, any time I click on a desktop icon to open the properties of this program, but not the program itself. What happens to all the icons.

  Hi AmyWilliams,

  1. you remember to make changes to the computer before this problem?

  2 are you able to open the program when you right-click on it and select open?

  Step 1:

  You can check the following link and try to run the Fixit and check:

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Step 2:

  Given that this issue has started recently, you can also try a system restore and check.

  You can try to perform a restore of the system to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• 18.0 R Firefox displays my Google Contacts, but when I click on a contact, I can't open it. I'm unable to click and open any component of Contacts.

  I use Firefox 18.0 and Windows 7. Google Contacts support contacts, however, I am unable to open and edit individual contacts. Similarly, when I click on groups, more, try to go to the next page of contacts, change my settings (gear icon) or which group I consult, nothing happens. I am able to scroll the displayed contacts page, it works when I click the icon 'all or nothing' next to the icon of the Group and the work when I click on new group and import Contacts in the lower left of the screen. I deleted the cached Web content and deleted cookies. At the opening of the Google Contacts on this computer in Internet Explorer or on my other computers using Firefox R 18.0 it works fine. Any suggestions are appreciated.

  Thank you!

  I ran through the procedures described and found the Yontoo "Runtime" interfered with my Google Contacts extension. Interestingly, that had been installed on my computer in may but it is only this week that there was a problem (that's a coincidence for upgrade to Firefox R 18.0). I disabled the extension and removed the program Yontoo which some sites suggest is malware. I am at a loss to explain how it was installed on my computer.

• The feature "Display list of web app points submitted by a user" is not available in the free trial version?

  The feature "Display list of web app points submitted by a user" is not available in the free trial version? I can see it in the tutorials but its not available when I am connected.

  It is just named differently now. You should be able to add the {module_webappscustomer} module through the Toolbox Modules in the web page editor window, as shown below. Please note that the webapps function is available only for sites webCommerce. Learn more about the available modules and usage in detail here - http://kb.worldsecuresystems.com/134/bc_1345.html?bc-partner#main_Web_App_Modules

  

  Thank you

  Vinayak

• hard to follow the point at the top of the display list

  Hey there.

  All day yesterday I tried to find a way to do something and I finally gave! I hope you can help me!

  I have a folder that contains all the code for a main menu. This code shows how to load the other as a file which initializes the code for general items that will be on the scene throughout the entire flash.

  But when I initialize the code for one of the menu items when he clicks on I don't know how to get 2 of the elements from the code of scene elements to be at the top of the display list. Because, as the code for the menu item load the elements of two stages will cover the elements of this code and after loading his will open and show them things that are loaded from the menu item code.

  If you do not understand quite what I said here pls let me know if I can explain in more detail.   I appreciate any help or instructions that you can give me!

  As you know, we use to define the depths with swapDepths() within the AS2.

  In AS3 the setChildIndex allows you to set the depths of your symbol (s).

  send to back

  setChildIndex(myMC,0);

  bring to front

  setChildIndex (myMC, numChildren - 1);

  So if you have 3 clips (myMC1, myMC2 myMC3) and you want them to appear in this order of depth, simple call them in that order.

  setChildIndex (myMC1, numChildren - 1);
  setChildIndex (myMC2, numChildren - 1);
  setChildIndex (myMC3, numChildren - 1);

  I'm sure that you must use the setChildIndex() within the display object container class.

  http://www.Adobe.com/LiveDocs/Flash/9.0/ActionScriptLangRefV3/Flash/display/DisplayObjectC ontainer.html#setChildIndex%28%29

  I hope this helps?

  Anyone else want to add to this answer more in detail?

  Best,

  Mark

• How to display the data in the same point of view when zooming happens to OBIEE?

  I want the data to be displayed in the same view, but it displays in the new view when I drill down. How can I achieve this?

  Thanks in advance.

  Dashboard edit-> Section (the section where your report)-> properties-> drill in place...

  Thank you

  AJ

• The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  Original title: clear the display

  Click Start or press the Windows key and type power can locate the power to change recording settings in the section of the Control Panel from the list above and click on it. At the opening of the Power Options pane, click choose when turn off display available on the left side.

  

  Choose a new setting for brightness in the drop down menu on the battery . Look at all the other parameters that you feel you want to modify, and then click save changes in the lower right to apply the options you have selected energy saving.

  You can now close the Power Options pane when you return.

• Is it possible to use the getObjectsUnderPoint of a DisplayObject that is not added to the display list?

  My situation:

  I have a DisplayObject (objA) added to the display list and a DisplayObjectContainer (objB) not added to the display list. When objA receives a MouseEvent.CLICK event, is it possible to use the localX and localY to the event of objA to get objects under the same point in objB?

  Sample:

  var objA:Sprite = new Sprite();

  objA.graphics.beginFill (0);

  objA.graphics.drawRect (0, 0, 100, 100);

  objA.graphics.endFill ();

  addChild (objA);

  var objB:Sprite = new Sprite();

  var childA:TextField = new TextField();

  childA.text = "This is the child.";

  objB.addChild (childA);

  objA.addEventListener (MouseEvent.CLICK, handlerClick);

  function handlerClick(e:MouseEvent):void {}

  var pt:Point = new Point (e.localX, e.localY);

  var objs:Array = objB.getObjectsUnderPoint (pt);

  trace (objs. Length);

  }

  so your test/trace environment can deliver it.

  Use the following code, publish your swf file and test the swf file in your standalone player (or publish a html and swf and test it in your browser).

  package {}

  import flash.display.Sprite;

  import flash.events.MouseEvent;

  to import flash.geom.Point;

  import flash.text.TextField;

  SerializableAttribute public class extends Sprite {Main2

  private var _objA:Sprite = new Sprite();

  private var _objB:Sprite = new Sprite();

  private var childA:TextField

  public void Main2() {}

  _objA.name = "a";

  _objA.Graphics.beginFill (0xdddddd);

  _objA.Graphics.drawRect (0, 0, 100, 100);

  _objA.Graphics.endFill ();

  addChild (_objA);

  _objB.name = 'B ';.

  _objB.Graphics.beginFill (0xdd0000);

  _objB.Graphics.drawRect (0, 0, 100, 100);

  _objB.Graphics.endFill ();

  _objA.addEventListener (MouseEvent.CLICK, handlerClick);

  Stéphane = new TextField();

  childA.name = 'tf ';

  _objA.addChild (childA);

  childA.multiline = true;

  }

  private void handlerClick(e:MouseEvent):void {}

  var pt:Point = new Point (e.localX, e.localY);

  var objs:Array = _objB.getObjectsUnderPoint (pt);

  childA.text = "";

  for (var i: int = 0; i

  childA.appendText(objs[i].name+"\n");

  }

  }

  }

  }

• List always up clicks when hidden

  So, I have a list item that was on the display list, but is currently off the coast of the display list. If the user clicks on the location of the screen where one of the items in the list used to be, it raises the event "ITEM_CLICK.
  
  Why is this? And what is the best way to stop him - do I have to set and manually disabled the "enabled" property when I show and hide the pane?

  So it is apparently "answer my own Question" or perhaps "think before day view"... armament and disarmament 'visible' Pavilion are what I want here.

  Thank you, me!

• You want to remove 'Pocket display list' down to the bottom of the list of bookmarks.

  Under Favorites drop-down list is "View Pocket List", just below "Show bookmarks". It appeared when you offered 'Pocket display list' or I can inadvertently adding it. I didn't do it! I would like to remove it but I don't know how.

  Thank you!

  Thanks the kenkon and cor - el.

  I could remove the Pocket button on the Navigation bar, by right-clicking the toolbar button. In addition, "Display list of pocket" removed himself from the drop down under bookmarks as well!

     https://support.mozilla.org/kb/disable-pocket-firefox
  

  Yay!

• When I type list5 contact in the Outbox, for example, it will not show the first 11 entries that indicate when I hit edit. on this list.

  The line of question above explains my problem. The list displayed when I hit edit on a list of contacts does not match the list when I hit Edit under contacts.

  It seems that you are having problems using some website in Firefox rather than Firefox itself. Can you tell us anything on the website that you use when the problem occurs?

• Dv7-3165dx notebook computer unexpectedly shuts off when the battery is low

  Dv7-3165dx notebook computer unexpectedly shuts off when the battery is low. Even at 17%.

  This gets really annoying, that I keep losing jobs! Before it used to give me a warning and then Hibernate. Now there is no warning and it turns off without saving anything.

  Help!

  The laptop is a year old.

  I already ran the diagonsitic battery and it said the battery was good.

  OK, I think I finally figured it by changing power options, and I think that the way you reset the battery also helped.

  Here are the parameters:

  reserve battery level (this is when the popup will appear).

  10%

  low battery (this is when the low battery action will be performed).

  8%

  critical battery level (my computer would die at this point.)

  7%

  low battery action: sleep, sleep (this customize to your liking).

  battery low notification: on (hold on).

  critical battery action: sleep, sleep (my computer died already in criticism.)

• Satellite A100-237 screen remains off when the lid is opened

  OK I'll try my best to explain this. My power settings are adjusted so that the computer has no effect when the lid is closed - except for the display, which is turned off and back on when the lid is opened (normal behaviour).

  Now, in rare occasions, when I opened the back cover, the screen doesn't come back, unless I close the back cover and open again. It is not a big problem for me at the moment, but I'm afraid that the connections of the screen with the motherboard by the cover have been damaged.

  BIOS version 2.00, maybe an update could solve it?

  Thanks in advance.

  Hi Ataberk,

  I think that your problem can be caused by the micro-switch that will detect when the laptop lid is closed. If this switch is in the open position so your screen will remain off even with the lid open. The idea here is that you can get the display by closing and opening the lid again.