Display of a .avi file problems

Similar Questions

• MXF video to .avi file problem

  Using Premiere Pro CS6 with Matrox MXO2 mini box and shooting with the Panasonic P2 card manufacturing. MXF file, I'll have a problelm when I put them in a file, .mxf to climb and then export as a .avi file.

  The computer on which the work is performed on plays back audio and video of the .avi into the Player Windows Media.

  However, when I play the same .avi file on another computer Windows using Windows Media Player, it plays the audio fine but no video, we see that a memo cleaf.

  When I export to .avi .mxf files first watch the avi for MATROX MPEG - 2 I - Frame HD codec.

  I can only assume this isn't the codec Windows looking for so now I you ask, what codec should I use to allow the export of avi to be played by Windows Media Player?

  When I export to a .wmv .mxf files all is well in all areas.

  Please help, much work is need to be completed.

  Thank you!

  I still think you're goals need adjustment. Instead of AVI and WMV, just give them a MP4 file.  That's what you get using the H.264 presets.

• audio with help. AVI files-problem with export

  Hello

  I desperately need help with what ages have tried to export relatively simple video. I have a. AVI video (with audio that plays well in the player windows media), I imported successfully into Adobe premiere 9, edited (just cut the first and last section of the 2 minute video) and added a black title with text slide. Simple. This edited video plays well in the elements (or at least he did until I started to play around trying to export it to how much the noise disappeared completelty! Cahnging the volume etc. makes no difference), but any format I try to export it seems to go out with is no noise at all, or a leaking soundtrack that does not follow the video. Help!

  Please can someone advise on this - I bought Adobe Premier elements specifically to edit this video and this done urgently need but have done nothing but struggle with this software

  All I want is to edit the orginal video and export it to a format that I can send/share with colleagues as a file type, they can see on for example windows media player.

  See you soon

  Sarah

  Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037

  What is a CODEC... a primer http://forums.adobe.com/thread/546811

  What CODEC is inside of this file? http://forums.Adobe.com/thread/440037

  .

  A report with the codec of your file details, use the programs below... a screen capture works well for people to SHOW what you do

  .

  For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en

  For Mac http://mediainspector.massanti.com/

  .

  http://blogs.Adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html

  .

  If you have a red line on the calendar after you import a video and adding effects of... your project is bad for your video... read above about codecs

  .

  Once you know exactly what it is that you change, report back with this information... and the setting of your project, and if there is a red line above the video in the timeline, which indicates a shift between video and project

  .

  H.264 NOT inside the http://forums.adobe.com/thread/854115 AVI

• .avi file problems

  Hello

  I have a file of VMWare Workstation instituted .avi.  The codec for this is VMnc and it is installed on my computer.

  Specifically, the .avi will play in Windows Media Player v11, however, when I bring it in PEv7 the clip is black.  At some point, I have a part of the video, but he goes.

  I have attached the file if you want to play with it.

  Can someone help me?

  Unfortunately, having a CODEC installed on his system, it's just for reading. The change is totally different from the edition. The chances that a CODEC will allow editing are small.

  I would look into the conversion of this file to a DV - AVI Type II w / 48 KHz 16-bit PCM/WAV. I use DigitalMedia converter, but there are freeware programs that do a good job too.

  Good luck

  Hunt

• Windows Media player on my machine does not run some AVI files. How can I check what the problem with AVI files. Files are running in other utilities of free ware

  Windows Media player on my machine does not run some AVI files. How can I check what the problem with AVI files. Files are running in other utilities free ware. Also, windows Explorer does not display dimension and other video related information for the file. Y at - it a tool that can indicate what exactly is the problem with the file.

  Ritu

  Hello

  1. you get any error message?

  2. don't you make changes to the computer before the show?

  Please follow the steps from the link below.

  http://support.Microsoft.com/kb/279242

• Recent items in Windows 7 64 bit will display recently played .flv files but not show .avi or .wmv

  Recent items in Windows 7 64 bit will display recently played .flv files but not show .avi or .wmv

  How can you do recent items don't forget these past .avi and .wmv files

  Hello

  You can change some values in the registry. To do this, copy / paste the following text in Notepad, save it as a MP3WAVRecent.reg file and double-click this file to add it to the registry database:

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\WMP11. AssocFile.MP3]
  "EditFlags" = hex: 00, 00, 01, 00

  [HKEY_CLASSES_ROOT\WMP11. AssocFile.WAV]
  "EditFlags" = hex: 00, 00, 01, 00

  Note that plus save recently used for the Jumplist instead of frequently used must be checked in the Options of WMP - player, as well as the music at the bottom of life private tab.
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• Cannot display a .avi file in Premiere Pro CS6. We get an error "not supported format or corrupted file.

  I am trying to bring three distinct animations in Premiere Pro, but it won't shoot them in the Source window or timeline of the sequence. The three files are uncompressed .avi files that were returned on in Autodesk Inventor. They are 15 second clips, around 2 GB and 40 fps. I can play them in Windows Media Player without problem. Any ideas on where to start troubleshooting? I can't imagine it's a codec issue, if the files are unzipped?

  Edit: I used MediaInfo to get the info on the video.

  General

  Full name: E:\Videos\13-1011 LAGCOE LED Billboard Video\1250 Drill Pipe elevator Video.avi

  Format                                   : AVI

  Format/Info: Audio Video Interleave

  File size: 2.06 GiB

  Duration: 15s 25ms

  Overall bit rate: 1 180 Mbps

  Video

  ID                                       : 0

  Format                                   : RGB

  Codec ID: 0x00000000

  Identifier of the codec/Info: Basic Windows bitmap format. 1, 4 and 8 bpp versions are palettised. 16, 24 and 32bpp contain raw RGB samples

  Duration: 15s 25ms

  Bit rate: 1 133 Mbps

  Width: 1 280 pixels

  Height: 960 pixels

  Display aspect ratio: 4:3

  Rate: 40,000 fps

  Color depth: 8 bit

  /(pixel*Frame) bits: 23.050

  Stream size: 1.98 Gio (96%)

  > can't imagine it's a codec problem

  Imagine still once your screen printing said they are bitmap files... IE a string of images, not 'really' a video that the Organization recognizes... and a rate of 40 FPS is also "weird".

  Autodesk has other options... to create a file with a 'true' video output codec?

  Because the Assembly is not the same thing as play, you may need to find a codec to be installed to be able to edit (NOT a codec pack!)

  Autodesk has a place where you can download and install 'their' codec to edit files?

• IPad - problem of AVI file

  I recently bought a camera of the fauna which records AVI video files. Once converted, the intelligent use of the Pro converter for - iPad.m4v files, I can play the files on my Mac desktop. However when I transfer the converted files (copied to an SD card using an Apple camera connection kit) on my iPad air he does not see them, and I'm unable to transfer them or read them on my iPad.

  Why play the files converted on my Mac BUT not on my iPad? Please, can someone advise if it is possible to overcome this problem.

  I understand that there is a problem of codec with iPad playback of AVI files, that's why they need to be converted BUT even when the files are converted, they do still have no game on the iPad...

  AVI is not a codec, it is a container, it can contain a wide range of codecs

  a codec means a der (co) / oder (dec), this is the true format of video and audio, or

  That's what support ios devices

  Video formats supported: H.264 video up to 1080 p, 60 fps, high profile 5.0 with AAC - LC audio up to 160 Kbps, 48 kHz, audio stereo formats .m4v, .mp4 and .mov; MPEG-4 video up to 2.5 Mbps, 640 x 480 pixels, 30 frames per second, basic profile with AAC - LC audio up to 160 Kbps per channel, 48 kHz audio stereo in the formats .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 x 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi format format

  You can use the free program handbrake to convert the media in other codecs to work with your ios device

  rather than relying on the somewhat limited use feature import connection cam then synchronize using iTunes to ios device

• Optical display of AVI file stream

  Hello

  I'm tring to display vectors of optical flow. AVI file. I work in the "Optical Flow.vi" example. I can't the optic to display flow vectors. To check if I have the right image formats, I've set up poster on the Panel before the 'current' and 'previous image', which are the inputs to the optic flow calculator. At the bottom of these views of the image, it is possible to see the image type. For some reason any "previous image" image continues to change its image type on the different loop iterations. In the current configuration, it is a 8-bit gray scale (as it should) for the 5 iterations 1 and pass then to an empty image of LGV. I don't understand why this is happening. I guess that's the reason that the optical flow vectors are not displayed correctly.

  Any help would be greatly appreciated!

  Thank you

  Oscar.

  The distribution of your image is messed up.  It must be remembered that they are pointers, not data.  You must use the current image from IMAQ copy of copy of the previous image instead of feeding in the shift register.  You probably have another image to the destination image when you convert your AVI image in grayscale.  Now, you convert the original image to AVI, so next time you read the file AVI it forces to match the format of the image (grey levels).

  Bruce

• just today, when I try to play AVI files from my digital camera... no sound plays on my pc with media player v11... I suspect it's a codec problem, but how do I know for sure?

  just today, when I try to play AVI files from my digital camera... no sound plays on my pc with media player v11... I suspect it's a codec problem, but how do I know for sure?

  Hello Jorstar1,

  Thank you for your message.  Windows Media Player 11 supports .avi, but compression can dictate whether he will play or not.  This is very probably a Codec issue, you can perform a websearch for a Codec that will play any avi compression.
  Please let us know if it did or did not help to resolve this problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• AVI files - no video, only sound problem

  Hello!

  I'm affected by some very strange and _very_ annoying problems with my Adobe Premiere Pro CS5 software - my. AVI files have no video.

  I recorded a lot of video for a remake of the video on my camera: Toshiba Camileo X 100 HD (720p60frames).

  I the play well in Windows Media Player and VLC Media Player and others, but when I import into first, I get only audio - video NO.

  I've been searching around the Internet for a solution - but found - it really gets on my nerve as I look forward to edit my video .

  The solution that would work, was Super (a conversion program) to download and convert my AVI files into MP4, h.264/AVC with AAC LC codec, but it will take years, and I'm also having difficulties in finding good quality video as the original file - ergo, I don't want to lose quality when converting. Convert all my files will take years - got about 10 GB - and I only see this as an emergency solution.

  I bet that there MUST be a fix for this, and my AVI files may work correctly for Adobe CS5 first. I need help - please help!

  Thanks in advance!

  p.s. I'll just say that I work with files before AVI, another project, but these cases recorded with FRAPS on my computer.

  There must be another solution!

  There are; transcoding is a waste of time, space and quality:

  1. Download and install VLC.
  2. In the folder containing your AVI files, create a new text document, called "avi2mp4.bat" (without the quotes). Be sure he has the. BAT extension. you need to remove the. TXT extension, which is added by default.
  3. Paste the following text in the command file, and then save it:

     @ECHO OFF
     for %%a in (*.avi) do "C:\Program Files (x86)\VideoLAN\VLC\vlc" -I dummy "%%a" --sout=#:file{dst="%%~na".mp4} vlc://quit
     
     

  4. To run the package, simply double-click, or you can drag and drop the AVI files on it, and they will be repackaged as MP4s with the same name as the original. If you use the approach drag / move, you can save this file anywhere on your hard drive, and all the files dropped on it will be converted and placed in the same folder as the original.

  That's all. The MP4s properly is important in the first, and you will no transcoding.

• LabVIEW Vision will not create large AVI file

  Good afternoon

  I'm having a problem with my camera data storage in an AVI file for further processing.

  Installation of equipment:

  Camera of the Grey Gazelle edge

  2 cables of camera Link

  Card PCIe-1433

  Software:

  LabVIEW 2013

  Module vision 2013

  Computer:

  Dell Inspiron

  Windows 7 Professional

  NTFS drive - 1 TB

  16 GB OF RAM

  X 4 PCIe bus does support speed

  Now the camera captures approximately 280 fps.

  I have a LabVIEW application that captures the image and writes it to an AVI file.

  I use 1 buffer IMAQ and the loop runs so fast that he has an image to store.

  I found the best performance using the codec uncompressed Y800 gray.

  First series of tests, with only 8 GB of RAM.

  When I run 10 seconds, everything is good.  I get about 2800 stored images.

  When I tried to run for 20 seconds, it would go well for about 12 or 13 seconds and then go very slowly (50 images per second).

  I assumed it was eating to the top of the available RAM.

  So, I replaced the 8 GB of RAM with 16 GB.

  Everything seemed to work as before.

  I ran the routine of capture of data for 10 seconds, he collected all the images, everything is good.

  I then tried to run entering data for 20 seconds.

  It seemed to work very well, the image is displayed on the screen, the gauge of speed indicated that he was turning to about 280 fps.

  When I open the AVI file, he had only 3846 stored images, about 13.7 seconds.

  I ran once again, the capture of data for 30 seconds.

  It seemed to work very well, the image was correctly displayed on the screen, gauge speed indicated that he was turning to about 280 fps.

  When I open the AVI file, he had only 3846 stored images.

  When I checked the hard drive directory, these two test files are the same size.

  2 065 819 KO.

  With the NTFS file system, there should not be a limit to the size.

  And the LabVIEW does not plant when she was doing writing to AVI function.

  Y at - it a maximum size for the AVI file, I run in to?

  Or something else?

  Thank you
  Jeff

  
  

• Backup of a series of images (from a smart camera) in an AVI file

  Hello

  I have a setup of laboratory in which display us deflections of brain cells in a plate well after be pressurized with air of 50ms. I have a smart camera attached to a card PCI IMAQ to acquire images.

  I'm saving the series of images in an avi file, so that I can show deviations in a slow video.

  The way I put it in place at the present time takes an image and stores it in an avi pre-existing (some .avi randomly that I didn't need) format. But here are a few problems:

  1. I would like for the VI create a NEW .avi, rather that saving it in a pre-existing.

  2. now, each image replaces just the previous in the avi file. Avi resulting is a film length of 00:00 with one image (the last frame saw the camera).

  I have what I programmed attachment. Any help would be appreciated.

  Thank you

  B.J. Kim

  University of Michigan

  Never mind, resolved. Simply put the Acquisition of Vision in the smaller loop.

  Thank you

  B.J.

• AVI files created with only fraps capture movie online no thumbnail view

  have vista prem all the service packs and years until ago never had a problem same true old avi files allways showed thumbnail view but after reinstalling windows this year something strange media player 11 customer would play my videos but keep playing in the back ground even after clicking this box at top right to dismiss the media player that has not closed it was going on for a long time It was the first problem more no thumb nails now I have realplayer to play both music / divx player videos just to play the types of test files a few times Flash flash mp4 don't thumbs realplayer videos flash show the thumbnails, but not flash mp4 videos I have a flash drive, he plays as much as I want to pull up and watch isn't a problem here.  other players in support of windows vista movie maker Centre Photo Gallery of nero player photo viewer 7 do not use it a lot just love mp4 videos when fire videos on disc, I noticed last time I did a sort of what mite be wrong with my system on the nail of the thumb and videos avi file in windows Explorer with who can have an intelligence to share... will add this note a few videos due AVI see the thumb nail view... just not my those more returned to the folder as in player media of record fraps I added this file, he showed the thumbs nails it ok for the of works very well...

  have vista prem all the service packs and years until ago never had a problem even true old avi files allways showed overview thumbnail but after reinstalling windows this year something strange customer of media player 9 would play my videos but keep playing in the back ground even after clicking this box at top right to dismiss the media player that has not closed it was going on for a long time It was the first problem more no thumb nails now I have realplayer to play both music / divx player videos just to play the types of test files a few times Flash flash mp4 don't thumbs realplayer videos flash show the thumbnails, but not flash mp4 videos I have a flash drive, he plays as much as I want to pull up and watch isn't a problem here.  other players in support of windows vista movie maker Centre Photo Gallery of nero player photo viewer 7 do not use it a lot just love mp4 videos when fire videos on disc, I noticed last time I did a sort of what mite be wrong with my system on the nail of the thumb and videos avi file in windows Explorer with who can have to share intelligence...

  ==============================================================
  The following article might be worth a visit:

  (FWIW... it's always a good idea to create a system)
  Restore point before editing the registry)

  For Windows Vista file association problems
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  If you want to display the content of the downloadable
  regfixes... just save to your desktop, unzip (or simply drag
  the file on the zip file and drop it on your desktop)
  and open with Notepad.

• Burn. AVI file on DVD-R Virgin

  I created a .avi file I want to burn it to a DVD so that it can be watched on a DVD player.  Essentially, just trying to convert movies to the House that I recorded on a DV tape to DVD format so that it can be monitored via a normal DVD player.  (In case it is relevant, I did the .avi file using a software called MotionDV Studio.  "It's a program that comes with the model of camcorder, Panasonic PV - GS150 Neu.)  However, when I insert a blank Sony DVD-R disc in the DVD drive in my laptop, the player does not seem to recognize that there is a disc in there.

  The DVD drive I have is an Optiarc-CDRWDVD CRX890S ATA.  I checked the features of this material on the internet and he must accept DVD-R discs.  I also checked in the device (from the control panel) Manager.  The State of the device indicates that the device is functioning properly.

  In the Windows Help and Support window, the theme of 'Format to a CD or DVD' seems to suggest that a dialog box should appear when I insert the blank disc.  However, it is not.

  I tried to use Windows Media Player to burn the .avi file but it says there is no disc in the DVD drive, even if the blank DVD-R disc is there.

  I also tried to use the Windows Explorer.  I find the .avi file that was on my hard drive, and then you press the "Burn" button while the file has been selected.  At that time, opened the DVD player and a dialog box appears asking to insert the recordable disc.  I inserted the above disc, but there is no other activity of the laptop.

  I also tried to buy a new set of DVD-R discs, but met the same problem.

  What other steps can I take to burn the .avi on the DVD file?

  Thanks in advance for the help on this.

  I created a .avi file I want to burn it to a DVD so that it can be watched on a DVD player.  Essentially, just trying to convert movies to the House that I recorded on a DV tape to DVD format so that it can be monitored via a normal DVD player.  (In case it is relevant, I did the .avi file using a software called MotionDV Studio.  "It's a program that comes with the model of camcorder, Panasonic PV - GS150 Neu.)  However, when I insert a blank Sony DVD-R disc in the DVD drive in my laptop, the player does not seem to recognize that there is a disc in there.

  The DVD drive I have is an Optiarc-CDRWDVD CRX890S ATA.  I checked the features of this material on the internet and he must accept DVD-R discs.  I also checked in the device (from the control panel) Manager.  The State of the device indicates that the device is functioning properly.

  In the Windows Help and Support window, the theme of 'Format to a CD or DVD' seems to suggest that a dialog box should appear when I insert the blank disc.  However, it is not.

  I tried to use Windows Media Player to burn the .avi file but it says there is no disc in the DVD drive, even if the blank DVD-R disc is there.

  I also tried to use the Windows Explorer.  I find the .avi file that was on my hard drive, and then you press the "Burn" button while the file has been selected.  At that time, opened the DVD player and a dialog box appears asking to insert the recordable disc.  I inserted the above disc, but there is no other activity of the laptop.

  I also tried to buy a new set of DVD-R discs, but met the same problem.

  What other steps can I take to burn the .avi on the DVD file?

  Thanks in advance for the help on this.

  ======================================
  Without the right software... burn an .avi to DVD file
  will create a DVD data... not a DVD-video.

  To create a video DVD that will play in a free-standing DVD
  Player... you need of DVD Authoring software.

  If you're running Vista Home Premium or Ultimate you...
  have Windows DVD Maker, and it should do the work for you:
  (if you don't have a DVD Maker... scroll down for an alternative)

  The Beginner Guide to creating Windows DVD
  http://www.windowsdvdmaker.com/guides/beginner/

  Windows Vista-
  Burn pictures and movies to DVD-video
  disc using Windows DVD creation
  http://windowshelp.Microsoft.com/Windows/en-us/help/5633ddcd-46a8-4d8e-82E1-2506401a60261033.mspx

  Free the following if you do not have Windows DVD Maker...
  software may be worth a try:

  DVD Flick
  http://www.dvdflick.NET/

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  If you have problems to download DVD Flick...
  Try the following direct link:
  http://sourceforge.net/projects/dvdflick/Files/dvdflick/dvdflick_setup_1.3.0.7.exe

  Save the file to a folder on your hard drive and
  install from there.

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  Good luck.

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.
  John Inzer - MS - MVP - digital media experience