Display of CD - RW 700 MB 552 MB Virgin

Similar Questions

• Satellite A300 - driver VGA not run is not enough smooth

  Hello
  Recently, I installed XP on my A300, but she seems not to run pretty smooth. The part where VGA takes place when viewing a website is really irritating, for example http://forums.pcbsd.org/<- scrolling="" down="" this="" is="" a="" lagy="" process,="" it="" shouldn't="" be,="" the="" problem="" is="" with="" vga.="" first="" i="" installed="">
  01/12/09
  Display driver
  ATI, Windows XP 8.477 World Wide
  and after that, I decided that maybe older are better by installing this:
  12/15/08
  Display driver
  ATI, Windows XP 8.552.0.0

  None of this seems to solve the problem. Any ideas?

  > scroll down it's a lagy process, should not be

  I would not say that the VGA (graphics card) driver does not work properly only because the Web page does not scroll you smoothly.

  How about use of other software, tools and programs?
  You are able to run some games?

  I think you should test it!

• Control Panel does not, audio playback does not

  Greetings.

  I accused several problems on my device.
  Symptoms:

  • Audio playback does not. Troubleshooter does not solve the problem; If clicking on "options to explore" the program gets just closed.
     
  • Not opening Control Panel. By clicking on the icon will display the window, but it will remain a Virgin and load indefinitely.
    After some time, estimated at about fifteen minutes, the window will always understand in the taskbar, but it will not be open upwards (while still showing the blank page on the preview).
  • Action Center to report problems of signature with a Microsoft Account and forcing the user to validate its identity. On trying to click on 'check', nothing happens. Switch to a local account and re - try to sign causes a "Please wait" message permanently on the app settings PC NOTE: accessing the said account from the web or with other devices is quite possible and does not generate any unusual behavior. The password of the account was changed, but this caused no change in the current situation.

  Please note that the above issues may or may not have a common cause. I'm not experienced user, so I am not able to discern the useful information. It should be noted, however, that none of these issues have been already presented, and the machine has worked perfectly so far.

  Thank you for your time.

  Hi, Marcello,.

  Thank you for an update on the issue. I appreciate your efforts to resolve the issue.

  As you have tried almost all the steps to solve the problem, this problem could be by the corruption of the user account.

  I suggest to create a new user account and check if that helps.

  Refer to create a local account

  See also: all about accounts

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you

  Thank you

• Action Wizard xml import into form

  Hello world

  I created an action in Acrobat XI the wizard action by batches of files xml export of pdf forms which were filled. However I can't see a way to create an action to do the opposite in the action Wizard: import of xml files of batch in a corresponding empty pdf form (the form fields and xml corresponding already perfectly). Import an xml file into my blank pdf form works when I go to forms-> form several options-> import data, find the xml file and fill it the form perfectly. Then "Save as" with the name of the xml file, but with extension pdf, of course and I'm done. This process takes about 25 seconds for a file. The problem is that I have to do this 700 times. I thought to avoid the step of "save under" with a directory containing 700 xml files and Virgin 700 pdf forms with name matching (Jean - doe.xml and Jean - doe.pdf, etc.), but still, I do not see a way to build action.

  Any ideas or advice you have are greatly appreciated. I thank very you much for your time and help!

  Chris

  Try using this code:

  this.importAnXFDF(this.path.replace(/pdf$/i, "xml");
  

• 700 AIO monitor display problems

  I got a Lenovo Ideacentre AIO 700 for Christmas and once through the initial updates after a black screen reboot, when I connect it to my TV it will go through my tv, but no more detects any other screen, how can I go back on the screen of computers?

  In response to customer relationships of the black screens intermittent when the 700-24ISH AIO devices are turned on, Lenovo comes from Lenovo IdeaCentre AIO 700 scalar fonts improved Firmware to solve this problem.

  The CONSULTING Service is available here: https://support.lenovo.com/us/en/documents/SF16-I0006

  The firmware can be downloaded here: http://support.lenovo.com/us/en/downloads/ds111714

  Thank you

• Satellite Pro M70-235: need last display driver for Ati X 700

  Hi, I decided that I will update driver graphic card but on the official ATI driver is not compatible with Toshiba laptops. On the download from Toshiba site, I found that older drivers (8.203-29/08/06) for my laptop to type but I need the latest driver. Can someone help me or send me a download link?
  Sorry for the English and thanks for responses

  Nothing to do. On the Toshiba page, you will find that these pilots. I already checked.
  Maybe the omega drivers will help you

• HP ENvy 550na 700: HP Envy 700-550na connect to a display

  I feel very stupid, but I'm trying my new computer connext to my new screen (purchased both in store HP). The screen came only with a VGA cable, but despite the computer manual showing in this regard, I can not find a computer VGA port! Does anyone know if she has one, and where it is? I can't believe that I would have sold a screen and a tower with a cable which don't linke both!

  I'm in the same boat - this is my first purchase of HP and my first computer in 10 years!  I bought the desktop PC HP ENVY Phoenix 850qe and monitor HP Pavilion 27xw 27 inch IPS LED backlit on the HP store, and I called and spoke with an HP sales representative and went on my configuration to make sure that I had everything that I needed - I can't also believe that they sent me a monitor that cannot be connected to my PC. The monitor comes with a VGA cable only.

  I had a frustrating experience with the help of HP (found this forum all waiting for the 3rd time)-representatives were difficult to understand, and I had a hard time to convince them that I have no VGA on my new computer port.  I talked to a representative and had to hold several times while he checked things and then I was transferred to the Home & Home Office store to join a DVI converter VGA - after being on hold for a while the appeal was discontinued during the transfer. I called support again and had to convince them, once again, I have had no VGA port. I was then transferred to the Bank home and had a chance to talk with someone, but he said that I have to order and pay for the adapter. I held for a very long time for a supervisor, who said it would take more than a week for me to receive an adapter from them, so she gave me an enough refund to buy an adapter on the spot. I asked if I could get just a cable HDMI to HDMI (since the computer and the monitor have HDMI ports) and she said it works.

  So the result was acceptable, but I am disappointed, I have to wait another day to get my computer set up - it's too late to go into a store, now, since I spent so much time on the phone with HP.

• How to create several IF = display then

  Hello

  I have a document of numbers with 2 sheets, and I use it to calculate the postage costs. I have a sheet that has costs for each weight (100 g, 200 g... 800 g), and I'm trying to enter prices in weight on the second worksheet.

  Basically I want to do is have the following (imagine that each row is a column of a row):

  Name of the product ()Entered manually) for example socks

  Weight of the product (so already rounded to 100g, don't have to worry about lines) for example 200 g

  Cost of shipping the product (taken from the cost of sheet 1 to send weight given) for example, £ 5.00

  How to display this value?

  I searched everywhere trying different methods, but I can't seem to make it work.

  Any help much appreciated

  Jonny

  I managed to solve this problem by using the SUMIF formula:

  SUMIF(B3,800,$World zone 2 Economy cost $800) +.

  SUMIF(B3,700,$World zone 2 Economy cost $700) +.

  SUMIF(B3,600,$World zone 2 Economy cost $600) +.

  SUMIF(B3,500,$World zone 2 Economy cost $500) +.

  SUMIF(B3,400,$World zone 2 Economy cost $400) +.

  SUMIF(B3,300,$World zone 2 Economy cost $300) +.

  SUMIF(B3,200,$World zone 2 Economy cost $200) +.

  SUMIF (B3, 100, $World Zone 2 economy cost $100)

  Basically, if B3 shows 800, then show the sum of 'Costs in economics world Zone 2 800'. Sum is the only figure here because I'm not adding anything, and using this formula with $ about the cost of the economy world Zone 2 (column name) and 800 (value), then it retains these for copy - paste.

• Satellite M60: Display flickers in hibernation in Vista

  All plans when released drivers vista for this laptop? I have installed all the latest drivers for ati x 700 all the last e.t.c of updates but cannot get the standby mode extended and sleep at work.

  Under the hibernation display is flickering as he went crazy, and under sleep it just freezes and never comes out.

  Hello

  I can't give you an exact answer, but if your unit doesn't have Vista capable sticker I think it will be supported for Vista.

• Satellite M40-265 LCD displays the image complete but crushed

  Satellite M40-265 LCD displays the image complete but crushed on two-thirds of the screen

  When my Satellite M40 - 265 ATIMobility Radeon X 700 and omega 3.8442, Windows Xp drivers, Sp3 boots by setting the LCD + analog RGB, initially only displays on the external screen after startup can be switched with Fn + F5 on LCD. Then appears on the LCD, the complete picture but only two thirds of the screen, third, the right is black. It works so well when the external monitor is not connected during the boot.

  When defini set to auto, select the display to the computer starts only when an external monitor is connected, then after that, I spent in the LCD screen.
  Damage to the inverter is excluded as already checked. Inspect visually the cable of the LCD displays nothing. Beside the left speaker, a ground wire (black) to screwed, but it is s t connected anywhere.

  Starting in safe mode is possible to use a display fullscreen on external

  Hello

  The M40 is a not sure oldie about the available settings in the BIOS and in the graphics options, but I think you should check the settings of the graphics card ATI Catalyst.
  I remember that ATI catalyst supports certain options such as resizing the Image. Here you can select the image scale Panel option full size
  In addition, you must set the resolution on the internal screen at native resolution of 1280 x 800
  I think that the external monitor supports the resolution, which is not the same thing as the screen internal.

• Satellite M70-151 - how to upgrade the display driver?

  Hello

  as the topic says I ran out of options to update my graphics card Radeon X 700 on my laptop...

  I tried to see here: http://de.nodevice.com/driver/Mobility_Radeon_X700/get44199.html
  After installation, I learned that he had to go on the manufacturer's site to get my drivers

  So I ended up here: http://de.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=DE
  Still no idea who was the Radeon X 700 driver, I tried every update... Most did not anyway, and when I check my graphics card driver put in says that my current driver was 5 years old.

  Taking advantage of the distraction of the online games I noticed that went it a few seconds sometimes. Most people recommend that you update all my drivers, but it seems more difficult than I imagined

  So please, help me find the right link to update my graphics card! To help speed things up a bit, I added my DxDiag report.

  Thanks for your help

  / Edit: addition of the DxDiag total was not possible due to "inappropriate language"... O.o

  ---------------
  Display devices
  ---------------
  Card name: ATI MOBILITY RADEON X 700 graphics card
  Manufacturer: ATI Technologies Inc.
  Track type: ATI MOBILITY RADEON X 700 (0 x 5653)
  DAC type: DAC (400 MHz) internal
  The device key: Enum\PCI\VEN_1002 & DEV_5653 & SUBSYS_FF021179 & REV_00
  Display memory: 256,0 MB
  Current mode: 1280 x 800 (32 bit) (60 Hz)
  Monitor: (Standardmonitor)
  Monitor Max RES:
  Driver name: ati2dvag.dll
  Driver version: 6.14.0010.6587 (English)
  The DDI Version: 9 (or higher)
  Driver attributes: Final retail
  The pilot/size date: 2005-12-12 00:41:04, 252928 bytes
  Would be WHQL logo: Yes
  WHQL Date stamp: n/a
  VDD: Non applicable
  Mini VDD: ati2mtag.sys
  Mini VDD Date: 2005-12-12 00:40:44, 1414656 bytes
  The instrument identifier: {D7B71EE2-1513-11CF-726B-08DFA1C2CB35}
  Vendor ID: 0 x 1002
  Device ID: 0 x 5653
  SubSys ID: 0xFF021179
  Revision ID: 0x0000
  Revision ID: 0x0000
  Video Accel: ModeMPEG2_C ModeMPEG2_D
  Deinterlace caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
  {3C5323C1-6FB7-44F5-9081-056BF2EE449D}: caps Frames(Prev/Fwd/Back) = (0,0,2) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: caps Frames(Prev/Fwd/Back) = (0,0,2) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {6E8329FF-B642-418B-BCF0-BCB6591E255F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
  Registry: OK
  DDraw status: enabled
  D3D status: enabled
  AGP status: enabled
  DDraw Test result: does not work
  D3D7 Test result: does not work
  D3D8 Test result: does not work
  D3d9 Test result: does not work

  Post edited by: Sarahbella

  Hi Sarahbella,

  You can download the driver on the Toshiba site. Therefore, check the link you suggested and look for your model of laptop. As far as I know Satellite M70 151 belongs to the series of PSM71E, to look for with these elements:

  Laptop > Satellite > Satellite M Series > Satellite M70 (PSM71)

  Download the driver and run the setup.exe file.

  Check this box!

• want to 700: Ho I change the name of the computer

  I want to change the name of the local computer - the user account administrator.  I can't find a way to do it without starting with the operating system.  Is it possible to change the name?

  @KarCha

  Your system - an are:

  Results for "want 700" (246)

  You can change the name of the computer:

  Control Panel > display icon > System > Advanced system settings >

  the computer name tab >

  Next to rename this computer or change its domain... name > click Edit

  NOTE:

  Generally, for home use, do not change the name of the Working Group.

  ===========================================================

  You cannot change the name of the built-in account"Administrator".

  To create an administrator account on the computer (in C:\Users\) home folder is named how you like - and still use your connection to Microsoft:

  • Create a LOCAL account on the computer
  • Once the account is created >
  • Change the account and change the type of administrator >
  • Log in to the new local account >
  • Windows key > settings > account > sign in with a Microsoft account

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Satellite Pro M70-113: cannot install Vista graphics driver and lines appears on the display

  Hello

  I have satellite pro m70-113 with ati x 700 graphics card.

  When I installed vista, he installed the default drivers for the x 700 'mobility radeon x 700-microsft Corp.-WDDM '.

  I've updated the display drivers for vista, that released by toshiba 2 days back... but the driver is not updated to the latest version, only the catalyst control center is installed when I ran the update of the driver of toshiba.

  The problem is that whenever I put my laptop in standby or hibernation and resume... the screen shows thin lines vertical/horizontal... and I can't use the laptop... and I have to still put the system to sleep, just to hope that it is not blocking the screen this time...

  This problem is 25% of the time only when resume...

  This problem is not resolved by the update driver for toshiba has released a few days back... as is not installs the drivers (I can't even install the drivers with the option "update drivers" of Device Manager and select file driver update from toshiba.) It says windows find new driver, but could not install the driver... Contact the manufacturer...)

  This snap shows the problem... : http://img360.imageshack.us/img360/2783/12042007366copyod1.jpg

  I updated the driver from an earlier version of catalyst, as it is downloaded from the ati site before that toshiba has released the update... this time it updates some 8. XXX version but the screen problem remains...

  Second, this update of the driver leaves me not sleep my system... the process starts for a sleep, but go back to the locked screen without making sleep ever... so I have no choice to get stuck with the default Windows... drivers having only the problem of the screen... and not the problem of sleep...

  Anyone here with a solution?

  Thank you.

  Hello

  I have Satellite M70-159 and I noticed the same thing several times. For most Vista works well but I don't remember cases in which the described problem occurs. I was just curious on M70 Vista and have had no time to intensive testing.

  Anyway, it will be interesting to know if you have already updated the BIOS to the latest version 5.10. If this is not the case to do this and watch carefully if the problem persists.

• HP Envy 311na 700: HP Envy 700-311na - no monitor output work

  Hi, thanks for taking the time to read this.

  No.: G9B05EA #ABU

  Model n °: 700-311na

  My PC works absolutely fine for the last two months, until what I tried to put on yesterday.  My problem is that my screen displays "signal found" despite my branch above Tower.

  Start-up and testing:

  • When starting my PC I get the usual beeps and the Red led on it becomes as it normally would.
  • The wifi light is on as it should be, on the front of my Tower.
  • The usual flashing light also works as usual on the front of the tower.
  • The fans work properly when turned on.
  • My wireless keyboard and mouse are recognized as soon as a key is pressed or the mouse moves, like light blue on my connector USB lights up as it normally would.
  • The CD open/close readers as it should.

  What I've tried so far:

  • Turning off and on again (no luck).
  • Remove the power cord from the computer and hold the power button for 15 seconds before reconnecting and powered it back up (no luck).
  • Connect my turn to another monitor via HDMI (no signal found error also on this one).
  • With the help of my usual PC monitor for other things (my xbox entry was detected immediately on the monitor via HDMI).
  • By using all the methods of display output 3 available with my usual monitor (DVI, HDMI, DP), none of them worked and all would result in no error signal on the screen.
  • Withdrawal/meeting the cables of the screen.  This does not give rise to my monitor to turn on as if is acknowledged the connection has been established to an output device, but once the display lights I get the usual error message ("this is the case with two DVI and DP connections, HDMI does not give me a lot of joy, but maybe it's because she's going through a ' 1 autodetect in 3 out" HDMI splitter.)  The separator acknowledges, that the HDMI is connected, but I get the normal red light that appears when a Powered HDMI is bound upward).

  What I did:

  • Touched the BIOS.
  • Damaged the machine.
  • Disassembled the machine somehow.

  I'm full of ideas on what else to try.  I had the PC for more than a year and has a problem similar to that in the first months of her own, I think it's something to do with the power supply cable (a friend looked for me), but he managed to make it work back again.  Unfortunately I am no longer able to contact my friend on this problem, so I am completely in the dark.  Help would be very appreciated (please avoid some specialized terms as I am a little one recruit across a company PC fixing).

  Thanks in advance.

  Hello

  Thank you for your response.  Fortunately, I can offer you a solution to my own question!  In my view, a windows update 10 can occur during the last stopped that I made.  The update I think doing something to the BIOS that was the issue.

  I did the following steps and managed to get the display to start working again:

  1. Turn on the computer and press the F10 key for eight seconds.

• Satellite L500 - 152 Display driver Sims3 plus

  Hello. I use this thing = [Satellite L500-152 | http://nordic.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?LNG=18&service=ND#tab3;] .
  And it was fine, until I came out and me Sims3 and Sims3 World Adventures, after installing both (+ in order correct ofc +), when I tried to start them up, I can not for the game Launcher, because an error message blocks my way...
  "* There was an error during startup. "Check the log for details."
  No info for don't nabs like me, about the location journal. And when you press the button available only here, the frozen Launcher naturally also closes its doors with her.

  So I checked google and found that people who have had the same problem, just changed the display driver to one that is supported by the game, I discovered that mine was not, I have * "ATI Mobility Radeon HD 4500 Series."

  _Sims3 taken in charge the radeon drivers are: _
  Series ATI Radeon 9500, 9600, 9800, X 300, X 600, X 700, X 800, X 850, X 1300, X 1600, X 1800, X 1900, X 1950, 2400, 2600, 2900, 3450, 3650, 3850, 3870, 4850, 4870, Â Intel® Graphics Media Accelerator (GMA) GMA series 3 Series 4 GMA.

  If someone could help me, by discovering what driver of the foregoing (as appropriate), will work on this laptop and tell me where to download it, I would be very very very happy :)

  Those who changed the driver perhaps no laptop and desktop computers. There is a big difference.
  Support drivers is much better for desktop computers.

  Problem is that the drivers for laptops are slightly adapted and designed for optimal graphic operations.
  I'm afraid that this with updating the graphics driver will be not so easy.
  It is always recommended to use the drivers provided by the manufacturer of the laptop. With the help of some third part and untested graphics card driver may be forced to run on a maximum and there is risk of damage or surprise. So be careful with this stuff.