Display of my publication of DPS under windows / desktop

Similar Questions

• Wireless display on VPCZ 1390 X under WINDOWS 7 Ultimate

  Does anyone know if Sony Vaio VPCZ 1390 X under WINDOWS 7 Ultimate a WIDI. The card says it does. When I called SONY tech support said there and it just needs to be activated. A second tech support says that this isn't. can someone tell me how to check or instal WIDI for wwireless display?

  Thank you. I'll check my system.

• I upgraded my laptop to windows 8 unfortunately Shamela library doesn't is not display Arabic titled correctly. I must say it worked very well under windows 7, what should I do?

  I upgraded my laptop Toshipa from windows 7 to windows 8, library Shamela worked very well under windows 7, now after the library Shamela upgrade does not work properly and the titles are written in the language of gibberish. Any solution please

  Are you referring to a custom library that you created?

  If you are, try to remove the library then re-create and see whether or not it appears correctly.

• Problems with games under Windows 7

  Someone knows a problem to start Freecell or Solitare under Windows 7? First of all, I fell into it when I bought a new computer (HP Pavilion Elite). When you play games the screen starts blinking annoying way when the mouse is turned on. I returned the computer at Best Buy and the Geek Squad confirmed my problem using their mouse and the monitor. They exchanged the computer for a computer to identicle who then developed similar problems. This was again confirmed by the Geek Squad. They exchanged this computer for an Asus CG series which now shows similar problems in slightly less (though still annoying). If these simple games wasn't buying intention, they revealed a problem that appears to me as being caused by Windows 7. I had years of experience with these games under Windows Vista with no problems at all.

  Hello
   
  I recommend you to update the display adapter drivers and see if it makes a difference. You must be logged on as administrator to perform these steps. 
   
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, locate the graphics card and then double-click the device name.
  3. click Driver tab, then click on uninstall the driver and follow the instructions.
   
  Restart the computer and let the computer install the generic drivers.
   
  Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  If the problem persists then you need to download the latest drivers for card viedeo and install it successfully.
   
  To get the latest drivers, you must contact the manufacturer of your hardware.
   
  If you still experience the problem, then you can create a new user profile.
   
  Steps to create a new user account:
   
  Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
  Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
  Click on create a new account.
  Type the name you want to assign to the user account, click an account type, and then click on create an account.
  Now search for the question.
   
  For your reference:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile 
   
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dragging a window to another cause of window, call a new drawing of the underlying window

  If I drag a window to another window, the window below Gets a refresh call. If the window below may only update a slow FPS, move a window across it is very choppy. The problem is even visible with two "fast" windows, for example two browser windows.

  I pasted in the NVIDIA system below information. Note that I have 2 GPUs, that she doesn't know if it's relevant or not, but we see this same problem at the office here on two machines, which have all two 2 GPU. The other machine has Windows 7 above.
  Information report by NVIDIA system created the: 08/08/2012 11:40:06

  Name of the system: FOEIJORD-SVG

  [Display]

  Operating system: Windows Vista (TM) Enterprise, 64-bit (Service Pack 2)

  DirectX version: 11.0

  Processor GPU: Quadro 5000

  Driver version: 297.03

  DirectX support: 11

  CUDA cores: 352

  Base clock: 513 MHz

  Shader clock: 1026 MHz

  Memory clock: 1500 MHz (3000 MHz data rate)

  Memory interface: 320-bit

  Total available graphics memory: 26878 MB

  Dedicated video memory: 2560 MB GDDR5

  Video memory: 0 MB

  Shared system memory: 24318 MB

  Video BIOS version: 70.00.30.00.0A

  IRQ: 0

  Bus: PCI Express x 16

  Error Correction Code (ECC): Av

  Processor GPU: Quadro FX 3800

  Driver version: 297.03

  DirectX support: 10

  CUDA cores: 192

  Base clock: 600 MHz

  Shader clock: 1204 MHz

  Memory clock: 800 MHz (1600 MHz data rate)

  Memory interface: 256 bit

  Total available graphics memory: 4607 MB

  Dedicated video memory: 1024 MB GDDR3

  Video memory: 0 MB

  Shared system memory: 3583 MB

  Video BIOS version: 62.00.66.00.02

  IRQ: 0

  Bus: PCI Express x 16 Gen2

  [Components]

  nvui.dll 8.17.12.9703 component of user experience NVIDIA driver

  nvxdsync.exe 8.17.12.9703 component of user experience NVIDIA driver

  nvxdplcy.dll 8.17.12.9703 component of user experience NVIDIA driver

  nvxdbat.dll 8.17.12.9703 component of user experience NVIDIA driver

  nvxdapix.dll 8.17.12.9703 component of user experience NVIDIA driver

  NVCPL. DLL component of user experience NVIDIA driver 8.17.12.9703

  nvCplUIR.dll 4.3.980.0 NVIDIA Control Panel

  nvCplUI.exe 4.3.980.0 NVIDIA Control Panel

  nvWSSR.dll 6.14.12.9703 NVIDIA Workstation Server

  nvWSS.dll 6.14.12.9703 NVIDIA Workstation Server

  nvViTvSR.dll 6.14.12.9703 NVIDIA video server

  nvViTvS.dll 6.14.12.9703 NVIDIA video server

  NVSTVIEW. EXE 7.17.12.9703 NVIDIA 3D Vision Photo Viewer

  NVSTTEST. EXE 7.17.12.9703 NVIDIA 3D Vision Test Application

  NVSTRES. DLL 7.17.12.9703 NVIDIA 3D Vision Module (0)

  nvDispSR.dll 6.14.12.9703 NVIDIA display server

  NVMCTRAY. DLL 8.17.12.9703 NVIDIA Media Center Library

  nvDispS.dll 6.14.12.9703 NVIDIA display server

  NVCUDA. DLL 8.17.12.9703 driver NVIDIA CUDA 4.2.1

  nvGameSR.dll 6.14.12.9703 NVIDIA 3D server settings

  nvGameS.dll 6.14.12.9703 NVIDIA 3D server settings

  Discovered what it was. I was running Windows Vista Basic instead of Aero color scheme. In basic, Windows probably only has a buffer for the entire screen, so when a window is moved, it overlaps any window must be redrawn. In Aero, each "buffer" of windows is cached to enable the gpu acceleration of the merger (for the transparent parts of the window). So in Aero, there is no underlying windows refresh subsequently drag another window across it.

• Photosmart 8450: Does the Photosmart 8450 under Windows 7 64-bit card reader work?

  Under Windows XP 32 bit card on my Photosmart 8450 network reader appeared as a network drive in Windows Explorer. Now that I've migrated to Windows 7 64 bit I get no network drive and if I put an SD card in the drive I get a 'map' mistake of access on the display panel. It is to be expected with the built-in drivers for Win 7? If so, is there no work around?

  Hello

  Thanks for the reply and sorry for not getting back sooner. Been strongly concerned about the end.

  I just find the solution to both problems.

  1. the card reader does not accept SD - HC cards. When I put an ordinary SD it worked fine.

  2 network drive mapping could not find the printer, even if I can print to it without any problems. I had recently also changed the router and discovered that the IP assigned to the printer was within the range of IP addresses assigned by DHCP. Changed static address to + 1.  Still did not work; posted in printer address was unidentifiable. Sitched printer, pulled ethernet cable outlet, turned on, plugged the ethernet cable. Bingo! The network drive works now.

• Where can I download the compatible driver Intel(r) 537EP V9x DF PCI Modem work under Windows 7?

  I just upgraded my Dell Dimension 5100 to Windows 7 from XP. I can't get any internet connection with cable or wireless. I think the problem is the PCI modem. Where can I download the compatible driver Intel(r) 537EP V9x DF PCI Modem work under Windows 7?

  Original title: MODEM PCI FOR WINDOWS 7 DRIVER

  Thank you for your comments. I use the dial upward. However, my PC does not connect to broadband, even with direct Ethernet cable connection or adapter wireless Netgear WPN111, I used happily with XP on the same computer. Device Manager displays the PCI as incompatible. FYI, I downloaded and installed the latest drivers for the wireless card.

  Install the following:

  • Dell system software
  • Intel Chipset Device Software

  Dell systems must run more stably once they installed. I would remove the modem PCI card.

  Intel Pro/100 VE Ethernet should work natively with Windows 7 as Windows 7 has built-in driver:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18268&lang=eng

  Then the Netgear Wireless Adapter for Windows 7 driver from here:

  http://support.NETGEAR.com/product/wpn111

• I forgot the password to the network under Windows 98.

  Original title:-bypass the password

  I have an old 98 Compaq windows desktop that I have not used for years. Its plugged in and I use the tower for Wi - Fi, but I use a laptop. My question is how can I bypass the password it asks when I can't remember it? It lights up then Compaq shows windows 98 screen then displays the screen with an image that I put on years before. with the PAST NETWORK ENTER password > username and password... when I got this 1 computer, I was a newbie and didn't know anything about them, I have do it I have written down on the book that accompanies it. There are no icons... and I have to click ctrl, alt, delete to turn it off. I have restore disks and I would like to restore it so I can use it.

  Hi Sudieq,

  Are you facing this problem under Windows 98? If so, please see the information provided below.

  Microsoft ended support for Windows 98, Windows 98 Second edition and Windows me on July 11, 2006. Because they are outdated and these older operating systems can expose customers to security risks. We recommend that customers who are still running Windows 98 or Windows Me upgrade to a newer, more secure Microsoft operating system.

  Check out the link:

  Windows 98, Windows 98 Second edition and Windows Millennium Edition Support ends on July 11, 2006
  http://support.Microsoft.com/GP/lifean18

  For more information about the issue, you can check the link:

  No Windows or the dialog box to start net logon
  http://support.Microsoft.com/kb/141858/en-us

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/

  Hope this information helps.

• Majority of the graphics are missing from the HTML version: HR 10 [10.0.1.292] under Windows 7 Professional, SP1

  Hello world

  I am really frustrated right now and am ready to throw HR by the window. I use HR 10 [10.0.1.292] under Windows 7 Professional with SP1 and 16 GB of RAM. There has been no major changes to my computer other than standards fixes/updates to date which are systematically pushed down for us to work. I have not installed new software.

  I worked on the same project file for the last 6-9 months and more. I have not changed directories. I have not changed the file names. I have not changed computers. My construction of the 25 September 2015 (which was our most recent product version) looked and worked perfectly.

  However, on January 8, 2016, I updated the date of our copyright made one or two other typo corrections made and then build a new one. Apparently, that's when everything goes haywire. MOST (but, curiously, not ALL) graphics in my chm file had been replaced by the symbol ' broken / lack of graphic link. Here's a sample:

  

  The really weird thing is that every graph, without exception, displayed correctly in its section related when I open the subject to change, as well as in Preview Mode! Yet when I create my project and display the final result, the graphics disappeared. And this isn't a case where all the images are missing or visible in any given topic - some graphics within any given topic are there while others are missing.

  But wait - it gets even MORE bizarre. IF I:

  • Open each topic in my project;
  • Double-click on each graph to open the dialog box Image ;
  • Click OK to close the dialog box Image (he did NO CHANGE see you ;))
  • Save the subject;
  • Close the topic;
  • Once that all the subjects have been "updated" then generate my primary Layout, all THE IMAGES ARE like MAGIC!

  I've done this TWICE. But the minute I close my project, go home for the day, open my project Sunrise the next day, make some changes more and then generate my main layout, I'm back to square one and most of my images were once more POOF! I simply cannot continue touching each chart every day! My project includes 535 topics and about 850 graphics - many are reused across so touching each of them is really out of the question.
  

  
  

  I did several searches trying to find just a small idea of what is happening. I'm really at the end of my mind - I hope someone has an idea how to solve this problem - as I said, I'm ready to scream!

  
  

  Nancy

  Nancy, have you tried to demolish your CPD file?

  If you don't know how to do this, click on the link below and a video it will guide you through the process.

  Click here to see

  See you soon... Rick

• DPS support windows 8.1 and windows phone applications?

  The latest version of DPS supports the development for Windows 8.1 and Windows Phone applications or is there a roadmap for when it will be supported? It seemed that it was to be communicated at the end of 2013.

  There is a viewer under development for Windows 8.1 devices, but it does not support Windows Phone, which uses a different operating system.

  More information: http://helpx.adobe.com/digital-publishing-suite/help/dps-apps-windows.html

• Speed dial does not work with Firefox 5 under Windows 7; How can I down Firefox 4.1?

  Speed dial Extension does not work for Firefox 5 under Windows 7.

  How can I downgrade to Firefox 4.1 so that I can use this indispensable Extension?

  This link will be fix Fast Dial for Firefox 8.0.1

  http://DL-Web.dropbox.com/u/12466346/speedfox.org/addons/fast_dial-3.5b1fixed2-FX.xpi

• What printer for Satellite Pro 420CDT under Windows 95?

  What printer is best compatible with a satellite Pro 420CDT work under windows 95?

  Post edited by: LizP

  Hello

  It's an odd question since this machine with this operating system is REALLY REALLY REALLY old. If you do not want to use a printer of opportunity then I suggest to H.P. older deskjet series (e.g. 870 C or 870Cxi] I had a few years ago, the 800 series with a parallel port on a Tecra 8100 with then first and went from Windows 98 to Windows 2000. It works perfectly under the two systems.

  Hope that helps a little... :)

  Welcome them

• Tecra A8-185 - the update of the BIOS under Windows 7?

  Hi again,

  I have a question how update of the BIOS under Windows 7 ultimate x 64. I downloaded the latest version of the BIOS for my laptop (Toshiba Tecra A8-185 PTA83E). After having unpacked there is only the .exe file.

  When I try to run this file, he said, that my OS is not supported. When I run it in compatibility mode (with Vista or XP), it starts the upgrade, but gives me an error: "the BIOS upgrade is failure (8). BIOS is not able on this configuration. "What should I do? I really need a new BIOS.

  Can I run it at the start of the USB key, or whatever?

  Hi offi55

  Why do you need a new BIOS? You may notice some problems with the laptop or why are you trying to update?

  However, I think that the update should only be done on the pre-installed Windows version (XP or Vista). I guess that this update n t tested and designed to update Windows 7 so I think that would be the reason why you can t.

  So to install Windows from the Toshiba Recovery disk and try to update again. It should work.

• Tecra 8200 - works very well under Windows 98SE, but not on Windows 2000

  Hello

  I've updated my Tecra 8200 for Windows 98SE and Windows 2000.
  Windows 98SE, wireless connection works very well and I was able to access the internet through my SMC Barricade router.
  But on Windows 2000, this no longer works.
  The connection to the router is ok, but I am unable to connect to the internet or to the page web administration of the router.
  The Toshiba Wireless Client Manager provides the following information:
  Status:
  ------
  Connected to the network: SMC
  Connection: Excellent
  Access Point name:
  Channels: 2
  Encryption: on

  ----------- Warning ----------------
  Impossible to communicate with the AP.
  Please check the encryption and IRQ.

  Yet once, I insist on the fact that under Windows 98SE, everything worked well... an hour ago...

  I am running Windows 2000 SP4 with the latest updates.
  Could someone help?

  Thank you

  François

  Hello

  Thanks for the solution. I hope that the installation of Windows 2000 Service Pack 1 helped.

  Good bye

• Portege 3440 ACPI BIOS under Windows XP errors

  Hello!
  There are error messages in the system log of my laptop under windows xp saying "AMLI:ACPI BIOS trying to read more... ». The Microsoft Knowledge base describes this problem as a behavior not secure the ACPI BIOS of the specifications. There is only one solution provided by microsoft - upgrade the BIOS to the latest version. Does anyone know is it more recent than the 1.6 for Portege 3440CT version? Toshiba does support Windows XP on Portege model at all?

  Hello
  According to the official website of Toshiba Bios version 1.60 is the most recent.