Display/print dimensions

Similar Questions

• HP Officejet Pro 8500 has more stalls now displaying "printing".

  Hi, in the Office I work in that we have 2 HP Officejet Pro 8500 A910 Series. It is on a network with 3 PCs running WIndows 7 and the other is connected via wifi to a PC that is also running Windows 7.

  The problem is that the printer is on a network often stalls displaying "print now" on the screen of the printer. The only way to continue to print is to turn off the computer, and then on again once, wait that he do his cleaning etc. then press print. It's normally ok for this work print, but as soon as other print jobs are added must be reset to zero and the cycle repeats endlesly all day. Until recently the other printer connected via wifi was working fine but now that is also exactly the same as described above.

  Recently, I searched the forums and have discovered that it is a common problem with this type of printer.

  I did the resets partial or total of the two printers without result.

  Bothe printers currently use the firmware version: LRP1FN1126AR, which I believe is the latest firmware.

  Please someebody can explain how to make these printers are working properly? Thank you very much

  Opening and closing the door of cartrdge seem to generate an interrupt that resets the connection and unlocks the pending print job.

  While not solving the underlying abnormality, it is much faster and esier on you and the printer.

• track detail displays & prints on all e-mails from the Inbox, and forward e-mails. How to remove or hide?

  My incoming e-mails shows all information tracking (which was previously hidden) on the screen and print emails. If I send an email tracking information included in the email sent. If I reply to an e-mail message, the information is not displayed (pictured) on the email. We have not been able to find a way to hide this information as it was in the past and to our other users.

  The menu bar, select View-Headers-Normal

  No menu bar? Press the ALT key.

• Bridge 6.2.0.179 does not display the dimensions of the PNG files in the metadata Panel - and can't get off.

  After the upgrade to the last bridge, the metadata panel displays is no longer the width and height of a PNG image. It still works for other types of files, such as jpg.

  I have to use Explorer to get the dimensions for a bunch of PNG. Very inconvenient. I wanted to downgrade the last bridge, but it seems that it is no longer available.

  I tried to completely uninstall the CC (and pref.) and reinstall. No joy.

  Just updated bridge this morning (6.3.0.177) and happy to say on my system (OS X El Capitan 10.11.6) that the dimensions of the png is now displayed after several months of not having at their disposal!

• The data forms Web site - how to display the dimensions of all the columns?

  Hello
  
  I'm working on a data form. I took accounts in lines and period, year and scenario in my columns. The first pass is displayed correctly-> P #JAN. Y#@CUR. S #ACTUAL
  But when I used the second col-> P #FEB. Y#@CUR. S #ACTUAL and save my data form. I can see the year and only col1 scenario dimension. Col2: Only FEB appears without year and scenario. How can I spread the year and the other columns scenario, rather than display only in col1. Your help will be greatly appreciated. Thank you.

  If you use the standard Web in the workspace form tool, you can bring up the form in edit mode, select the Details tab and there is an option "Repeat the headers", Just check the box and you should be good to go.

  JOINT TASK FORCE

• Display printer LaserJet M127 language

  Someone has accidentally resets the printing language on our Laserjet M127 of English in an unknown language. We have not been able to resolve the issue based on the assistance provided, as some point in the process, to understand the language on the screen to navigate through the screen of the printer. If we cannot understand the language CSS how reset us to English? For example, how many clicks must we could help every step.

  Thank you!

  Thank you!
  But not the exact solution (I think that I had to go to 6 or 7 clicks), it worked! Thank you!

• my Dell 1700n not printed. It displays "printer offline".

  It worked up to what Comcast installed their infinite. I had to buy a new router, I was using a Linksys router, I have a tp-Link installed. I just bought a HP 451nw color laser printer and I'm having a problem with it.

  Hello

  As OEM Dell is responsible for the good operation of the printer and their
  drivers provided. Check their documentation online with Dell Support, and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  ---------------------------

  Ditto for the HP printer.

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Try printing HP and Scan Doctor for Windows
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146

  Good luck, you need to update or reinstall the latest driver.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Solve printer problems (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Open the printer (Windows 7) Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Layout does not display/printing on mandatory pages

  Hello
  
  I am using reports 6i and having a problem with the layout of a report.
  The report consists of a sql query, returns the data for the 14 contracts.
  I need the report to produce a cover letter, a contract, a calendar, a contract and a calendar in this order for each contract (sections so 14 * 5 page layout).
  
  for example
  Letter contract 1234
  contract of 1234
  Annex contract 1234
  contract of 1234
  Annex contract 1234
  
  Letter contract 1235
  contract of 1235
  1235 contract annex pg1
  1235 contract annex pg2
  contract of 1235
  1235 contract annex pg1
  1235 contract annex pg2
  
  and so on
  
  However the schedule on a few contracts spans several pages, but because I put the vertical panels per page = 5, these new pages are originally the second pages of the appendix to print on order and product of the white pages or the
  
  I tried various things page protects, in full expansion, anchor, etc., but can not find it to produce the report properly.
  The report works perfectly if the calendar is not repeated on several pages.
  
  Any help would be greatly appreciated.
  Thank you
  Kerry

  I don't think you need to do something with the vertical panels per page here. It looks like a report with 3 repeating frames inside another:

  R_letters
  ..R_contracts
  ....R_schedules
  

  You can set the page break before make sure that the letter, contract and the calendar start on a new page to the property. Now the calendar can be on 2 pages without problem.

• All tabs have disappeared - bookmarks, display, printing, story, options, help, file, gmail, everything. They simply disappeared. How to make a comeback?

  There are NO tabs at the top except for the search box on the right and a place to open different pages - IF I hold the mouse there. As soon as I move the mouse, they're gone, too. And I don't see things at the bottom of the screen that I always used to see (icons for e-mail, anti-virus, volume, show desktop, etc.) even if I hold on the mouse there. I have to minimize Firefox. I just turned on my computer this morning and that's what I had. I rebooted and it was always the same. Help, please.

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Ctrl + Shift + F).
  
  If you are in full screen view then hover over with the mouse upward to make the bar appear Navigation and tab bar.
  
  You can click the maximize button in the upper right to leave the mode full screen or empty space of a right-click on a toolbar and use "exit full screen" or press F11.

  Press F10, or press the Alt key to bring up the 'Menu Bar' temporarily.

  Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible: "view > toolbars".

• M127FW MFP: Laser Jet MFP M127FW Pro stuck displaying "printing Page Fax: 2.

  
  

  I managed to Flash the newly updated firmware. I didn't have to clear the NVRAM. Thanks for the PM has even thought that I didn't need her. Good to know if it happens again.

• How to tell native resolution and size of print file dimensions

  Try to learn the LR5

  Coming for many years of Bridge and Photoshop I can't find the native print dimensions and resolution in LR.

  Only in library metadata module y at - it a file size total pixel.   example of 4288 x 2848

  I can't find anything in the print module to specify the native size of the printed Document.  TIF or jpg

  W x H inch Dimensions

  Pixels per inch of resolution

  Total pixel dimensions

  You view or edit this first in Photo Shop to define the quality and the print size.

  Maybe I'm missing something, but I can not find this information in LR

  I know you can adjust the size of printing in LR, but what is? Or it is out of your control unlike Photoshop.

  In LR, you choose the dimensions and the resolution for the output in the print module. You can send directly to your attached printer, or print to a jpeg file, if you want to send to a photo lab.

  

  If you need the specific pixel dimensions and resolution, preferred using export library. But you cannot use the contrast and brightness settings. I have a standard photoshop action for export using a curve of brightening of batch processing.

• Dimensions/fields displayed on drill holes in the screen

  Is there a way to display other dimensions/fields on the screen in which you load in the system target to break through?
  
  To develop, suppose I have an import file that I have the following fields: entity, account, Department, affiliation and amount. My metadata on the target system has a home for all fields except dept because we do not load Dept. So I go ahead and I created my import format to capture all fields except dept that I don't shoot in because I'm used to load it. I load my data and now I break my target system (click on $1000) and FDM launches and I click on the initial screen that shows $1000 and it opens two lines that make up the $1000. On this screen, however, I see only the dimensions/fields I have loaded: entity, account, account Description, quantity. I won't see Dept because I do not have it as I'm not loading it. I know that I can include Dept in the Format of import as an attribute and click the amount to show attributes but is it possible to have it on the screen? In other words, I want to make in the field but I don't want to load on the target system so it shows up on the drill through the screen?
  
  Sincerest apologies if I do a bad job to articulate the question.

  Hello

  Unfortunately there is no way to change the design that you see during the Drillback.

  The displayed dimensions are controlled by the dimensions which are loaded into the target system. Given that the target system does not these dimensions, it is not displayed when drillback.

  Thank you

• columns to display in a column dimension

  Is there a way to show like 'Product Type' and 'Product' in a column in a report? (displayed as dimension)
  where 'Type of product' and 'Product' are of different levels
  
  Example: The first column in the report should look like this:
  
  Product type 1
  Product 01
  Product 02
  Product 03
  Product type 2
  Product 04
  Product 05
  Product 06
  
  Thank you
  Janne

  Hello

  one way is like going to union

  Another way is: adding type, columns of product in the list of selection criteria... go to rotate

  I guess the product type is first then product will come next...

  Now apply subtotal on producttype > before that date hide this column of type of product...
  And, to get the same values as the type of product he... instead of "Type of product Total 0 '...

  The sigma button, click on "Format of labels", keep it in the caption field...

  Published by: Kishore Guggilla on July 29, 2010 13:18

• How to print the specific image size?

  Hi Gang - How can I print an image 11 x 15 "on paper 13 x 19"?  Initially, it seems easy, but things are not how to navigate. Here's what I did:

  I exported the photo and used the dialog box LR image resize to 11 x 15 "- easy."

  I imported the exported image (assuming that the image was 11 x 15 ") and then in the LR print area - it is where the confusion begins.

  The print tab displays the dimensions of the image as 8 x10.19 in.  Help, how can I do the 11 x 15 "I need it to be?

  I understand that I will need to adjust the image to get the part I want in the space of 11 x 15, but for the moment, I can't even 11 x 15 "size.

  I tried package customized options, but no luck there.

  I would like to Print Studio Pro Canon plugin that works very well. Except, again, I don't know how to ask the image size 11 x 15 "for printing on paper 13 x 19".

  Fiddling with settings, I printed a dozen attempts and still no luck to reach 11 x 15 "size of the image on paper 13 x 19".  For now, I'm OK with the image to cut or to another plane - no baby - I need to know how to make the print image 11 x 15 "size of the image. A

  Thank you to offer suggestions.

  Screenshot shows that my image 11 x 15 "is 8x10.19; I don't know how 11 x 15 ".

  

  LR v5.7

  Mac OS X Yosemite v10.10.2

  Brain: generally intuitive, but need some help on this issue!

  The first step in the Lightroom print module is to click on the Page Setup button, select your printer, and then select the paper size. It looks like your screen to paper size correct has not been selected yet, because you said you wanted to print on paper 13 x 19 inches, but the paper on the screen is only 8.5 inches wide. My guess is that Page Setup is always programmed for letter-size paper, and you should come back on layout and change it. After you do this, if your layout Style is unique, you should be able to affect the size of the cell 11 x 15 inches.

• Toshiba e-Studio Ghost Prints

  Hello world
  I have a very strange problem ever happen before... I use Win 7 and I have toshiba e studio 351 in my local network with other computers, until a few days ago, I was using eStudio-451 drivers and work perfectly for 1 year. A few days ago it stop printing, quite strange because:

  -the works of Copier
  -works to scan
  -J' use a static local IP address and I ping, all packed went well
  -tcp/ip active and all the other stuff, everything is OK
  -I can access the printer by IP address in any browser and change the settings
  -drivers installed/uninst etc seems to be OK in my PC

  Windows displays printing OK, the document "printing" to disappear, it's as if the printer eat. No jobs are showing in the job_status the printer...

  Any problem like this before?

  Thanks for your time

  Hi mate

  I m do not know if someone here in the forum would be able to provide support here since it is a laptop computer and the multimedia forum.

  But I found a nice page of Toshiba, where you could find support for printers and faxes:
  http://business.Toshiba.com/USA/support/training/index.html

  Here's a nice training for the priner video, you own
  http://www.toshibamedia.com/451C/CBT-451c031-load.html

  Hope this might help you a bit