Display printer LaserJet M127 language

Similar Questions

• change the display of the Chinese language to English on LaserJet M1212nf MFP

  Hello

  How do you change the display of the Chinese language to English on a LaserJet M1212nf MFP printer?

  its screen was English before but someone changed the Chinese and we do not know how to change the display in English language

  Hello

  Please, try the following steps:

  • Press the power button to turn the product on.
  • On the Control Panel, press the Setup button to open the main menu.
  • Press the left arrow key three times to select the system setup and press OK. The language option opens.
  • Press OK to open the language menu.
  • Press the right arrow key to select the language that you want to display, and then press OK.
    Press the back button to return to the main menu.

  Kind regards.

• My printer (laserjet m1210) continues to display error memory power

  My printer (laserjet m1210) continues to display error memory power. What is and how to fix it?

  Hello world

  There is a clip on the chip on the cartridge's protective plastic. Remove the orange plastic, and he's going to quit giving you the power of memory error. Refer to figure 6

  Power supply memory error "Message is displayed on the control panel

  

• I'm cann't print my printer LaserJet 1536 dbf MFP by Tcp/IP

  I installed the new printer laserjet (dnf MFP HP LaserJet 1536) with driver when I download from the HP Web (Full Version).

  When the driver installation is finished I have connected answer my printer with the mode of manual configuration of networking (TCP/IP)

  After that I already finished move to test the scan with flat screen, charger charge, fax / output, but cannot print

  but I use the USB cable to connect my printer could print

  Question: how to configure the printer to print with TCP/TP

  Hello MoUOun,

  Welcome to the HP Forums!

  I understand that you are unable to print using the Laserjet MFP 1536. I will do my best to help you! First, what is your operating system on your computer? Windows or Mac?

  I recommend you to download the print and scan doctor, to check if this utility corrects why you are unable to print. (It is only for a Windows computer.) Please post the results on this post, if this fix anything.

  Please follow this entire document of HP "Printer is off-line" Message appears on the computer and the HP printer will not print make sure that the printer port is correct, which is shown on this document.

  Please post your results, I will be looking forward to hear from your part, have a great day!

• How to get the printer laserjet 3015 of all-in-one to work with hp520 touchsmartpc 64-bit with windows 7

  How to get the printer laserjet 3015 of all-in-one to work with hp520 touchsmartpc 64-bit with windows 7

  Hi baldwinj,

  Follow the steps outlined in the document below to install the OS driver in for this printer in Win 7 64 bit.

  HP LaserJet Color LaserJet and products of LaserJet AiO/MFP - install the driver included in the operating system Windows 7 (OS)

  Download drivers and software

• win xp sp3 restart after trying to install edimax ps-1216u for printer laserjet p1102

  win xp sp3 restart after trying to install edimax ps-1216u for printer laserjet p1102
  I have the printer installed that tried to install edimax ps-1216u and when it tries to install the printer, the computer restarts

  Problem solved! I have disabled smart installation with SIUttility for this computer. I have manually installed the printer by adding the port tcp/ip standard and all is ok now.

• printer Laserjet 1020 upgraded to windows 8.1 will not print PC HP Envy H8-1503

  Hello

  was wondering if anyone has problems printing of victory 8.1, used doctor HP printing and scanning and said everything's fine but a test page does not print as I can't print anything from another category windows 8.1. using windows 8 that I had no problem printing, I've updated all the drivers

  Also when I connect my laptop using windows 7 it prints, and with them turn off the printer laserjet 1020, then plug in the USB cable and windows 8.1 it will be printed.

  But when I turn off the 1020 laser jet, then turn it back on then try to print windows 8.1 that it will NOT print

  Thanks Mike

  Hello

  I understand that you can not print with Win 8.1.

  Drivers for win 8 and 8.1 Win are the two Version 9.
  Make sure that you uninstall the previous printer software.

  Here is a url to completely uninstall a printer in Win8.
  http://www.YouTube.com/watch?v=-M0GVVcwT-o

  Restart the computer.

  Reinstall the software of the printer again. Select full features software driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4131&LC=en&cc=us&DLC=en&sw_lang=&product=439320#N173

  If you need more simply make assistance let me know.

• HP LaserJet P2015dn printer range: printer LaserJet P2015 memory upgrade

  In HP "LaserJet P2015 [c00623611) series User Guide" which was packed with the printer, I learned that the memory upgrade chips are 100 pins minimum speed of 66 MHz.

  In HP HP Support Center "Printer LaserJet P2015 Series - specifications of the printer" I have been informed that the memory upgrade chips are 144 pins minimum speed of 66 MHz.

  What document of HP is correct?

  Aren't we glad the Boeing team who did as 747 you and I fly on doesn't have that same attitude on the correction of the inaccurate documents from 10 years. Programmers (I used a) and tech writers waste popping popcorn, drinking coffee and put on day of NCAA brackets in a day it would take to change all the various translations of a pdf most time.

  It is not surprising that HP stock has declined 80% in the last 4 years if the employee point of view prevailing.

  But thank you for the passage of my suggestion/request/grumble along their.

  I think we can close this discussion.

• HP Officejet Pro 8500 has more stalls now displaying "printing".

  Hi, in the Office I work in that we have 2 HP Officejet Pro 8500 A910 Series. It is on a network with 3 PCs running WIndows 7 and the other is connected via wifi to a PC that is also running Windows 7.

  The problem is that the printer is on a network often stalls displaying "print now" on the screen of the printer. The only way to continue to print is to turn off the computer, and then on again once, wait that he do his cleaning etc. then press print. It's normally ok for this work print, but as soon as other print jobs are added must be reset to zero and the cycle repeats endlesly all day. Until recently the other printer connected via wifi was working fine but now that is also exactly the same as described above.

  Recently, I searched the forums and have discovered that it is a common problem with this type of printer.

  I did the resets partial or total of the two printers without result.

  Bothe printers currently use the firmware version: LRP1FN1126AR, which I believe is the latest firmware.

  Please someebody can explain how to make these printers are working properly? Thank you very much

  Opening and closing the door of cartrdge seem to generate an interrupt that resets the connection and unlocks the pending print job.

  While not solving the underlying abnormality, it is much faster and esier on you and the printer.

• Fixing a paper jam in the printer LaserJet 1020 range.

  From time to time I see members post questions with paper jams that occur in the LaserJet printers single function. I found a video that goes through the steps of a paper jam on a printer LaserJet 1020 of compensation.

  The video will cover the following steps:

  1. Transparent area of the print cartridge paper jam.
  2. Reset the printer.
  3. Reload the paper into the device.
  4. Adjust the print settings in the printer driver
  5. Clean the surfaces of the cartridge.

  I hope the community finds it useful and informative. Good impression!

• ATI Mobility radeon HD 4500 series reported an error code 43 and he he had stopped working, so my printer Laserjet M1132 MFP had stoped printing.

  My computer said that ATI Mobility radeon HD 4500 series reported an error code 43 and he he had stopped working, so my printer Laserjet M1132 MFP had stoped printing. How can I make it work againg?

  SHELF MODEL: tm2-1010ea

  SERIAL NUMBER: CNU0290H5H

  Any required driver updates should come from your support site for PC manufacturers, HP? and not Ati or windows update

• print - Laserjet P1102w - new install via USB

  I tried twelve ways to Sunday to get my new Laserjet P1102w to print.  The installation, which took place today, seems to agree.  I've uninstalled and reinstalled the software a couple of times.  A test page is quickly obtained at the end of each facility.  But when I try to print a document, it never makes it to the printer.  Rather, bunch printing just straight up in a queue in the printer on the computer dialog box that clear periodically.

  I ran the HP diagosntic tool.  He told me that everything is fine.

  I installed the printer to an HP Optiplex running Windows7 64 bit.  It is on a network, but I have deskadmin access.

  All the lights on the printer appear to be in good condition.  Nothing that connects, just a light green continuous.

  The question is, why I can not get print comands to my computer (where they appear in the queue) to the printer.

  At one point, I was wondering if something was wrong with the USB cord.  It's long, 16 feet.  But it works well enough to produce the test page to each facility.

  Any advice will be GREATLY appreciated.

  Thank you.

  Minonk

  HI Minonk,

  The connection peut be at fault; the fact that you can get this test page to print means that it is probably OK.  If you can swap a new cable, try this after everything and maybe move the printer more ready for a test.  Again, that is if all other fails...

  Try restarting the spooler.  There are two ways to do this.  You can buy - they're basically the same thing and it's just a matter of which the way is most comfortable for you.

  -------------------------------------------------------------------------------------------------------------------------------------------------

  Control Panel > display icon > Administrative Tools > Services > scroll down... look for > Print Spooler > click on restart the Service

  OR

  • Start > search / type > "cmd" > click on "Cmd.exe".
    Type net stop spooler , and then press the enter key

  Box: If you delete the queue print jobs, you can do this here with:

  • Type del %windir%\system32\spool\printers\*.*/q , and then press the enter key

  Note: the only spaces in this command is a single space between led and % and a single space between * and / q

  • Type net start spooler , and then press the enter key
  • Type exit , and then press enter to exit Cmd.exe

  ---------------------------------------------------------------------------------------------------------------------------------------------------

  It's my pleasure to help.

  Say "thank you!" to the help by clicking on the star of Kudos to show your appreciation for the help.

  Fixed?  Mark this message 'accept as Solution' to help others find the answers.

  Note: You can find "Accept as Solution" only on the threads started by you.

• "Error - printing LaserJet" 2100 TN

  This printer is an office where it worked fine via ethernet.

  It is not configured / has an anti-theft system so that in can only work in the office, right?

  My OS is windows 7 ultimate 64-bit.

  The printer prints on the page of configuration with IP etc. I was able to print the pages of another printer that is connected to the same router as my computer correctly (and 2100 TN is now). There is nothing wrong with either ethernet cable.

  I followed
  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02850101&lang=en&cc=us&taskI...
   
  and installed PCL5, all seemed well until the test page, which was not being printed. If I try to print nothing happened Word Pad either. In looking at windows printer dialog box displays "error - printing". Even with PCL6, and if the choice of windows update to install the drivers in the Add Printer Wizard.
   
  If attempting to add it as a new product I get now dialog box saying "additional information required:
   
  http://gyazo.com/25ab5cf9ca0ea45ed900ae7b5e284d15
   
  restarted the printer. in wordpad status says ready. still does not work.

  HP Instant Support - Driver Check
  HP Instant Support - check pilot detected the following: connected printer: HP LaserJet 2100 Series PCL 5Operating system: Windows 2000Connection Port: 10.17.30.11_1
  Results: Cannot determine the status of your printer driver.

  Dear Sir, it seems you are the only one not to provide good information.

  Through google, I discovered that the way to reset the cold of this particular model is the JOB CANCEL button, not the wholesale/GO BUTTON.

  http://www.printertechs.com/printer-troubleshooting/cold-reset-instructions-HP-laserjets

  Once I did that I got a new IP address with my routers standrad format and I just now correctly printed the test page.

• track detail displays & prints on all e-mails from the Inbox, and forward e-mails. How to remove or hide?

  My incoming e-mails shows all information tracking (which was previously hidden) on the screen and print emails. If I send an email tracking information included in the email sent. If I reply to an e-mail message, the information is not displayed (pictured) on the email. We have not been able to find a way to hide this information as it was in the past and to our other users.

  The menu bar, select View-Headers-Normal

  No menu bar? Press the ALT key.

• ColorMFP LaserJet M175nw 100: connect printer Laserjet 100 wireless

  Due to the recent DDOS acctack on servers DNS of Dyn Corp, it was recommended that all passwords and secret phrases on routers and Internet all devices be changed. I did this on all my devices and I'm successful with the exception of the 100 Laserjet Printer.  When you use the arrow keys on the printer to access the "network" Menu, I get a response indicating 'Access disabled Menu'.  I also have this same answer for the configuration of the system and Service.

  So I correctly uninstalled the printer and tried to reinstall it.  In doing so, I am only able to put in place as a USB printer and not a wireless printer.  Trying to set up as a printer wireless Configuration utility see the SSID of the router and then when he's in the Install utility installation fails.  I turned off and unplugged from the computer, printer and router and re-run the routine without success.

  In my view, if there is a way to set the default printer, it will disable the block on access to the "network" Menu on the control panel of the printer and then I would be able to configute the operation it's wireless.  I would also appreciate other possible solutions.  Thank you!

  Hello @burtech,

  Thank you for your participation in the Forums of HP Support! After reading your post, I see that you need to reset the printer. I want to help you with this issue today.

  I can provide reset for you in the product Monograph.
  In the forum next to our name to handle just click on the envelope
  to see it.

  You can click on the button 'Accept as Solution' and the 'Thumbs Up' for my efforts. Please let me know how it goes. Have a great day!

  You can click on the button 'Accept as Solution' and the 'Thumbs Up' for my efforts. Please let me know how it goes. Have a great day!