M127FW MFP: Laser Jet MFP M127FW Pro stuck displaying "printing Page Fax: 2.

Similar Questions

• HP Laser Jet MFP M127fn Pro: How to send a fax using speed dial?

  I have a new HP Laser Jet MFP M127fn Pro: how to send a fax using speed dial, I entered already numbers in the address book.

  I'm embarrassed to say that I spent several hours trying to get the speed dial to work on a M127fn.  It turns out that there really no speed dial.  That's the conclusion of at least a HP tech that actually used the machine.  Another tech was able to describe a way to fax a phonebook entry, but it is quite too complicated to be called a speed dial.

  [1] press the button settings (key).

  [2] press the right arrow to access the phone book.

  [3] press OK button.

  [4] use the right or left buttons to reach the desired phone book entry.

  [5] press the OK button to reveal the label for the entry, or "empty" if it is not set.

  [6] press the OK button if the element is set to display the fax or dialing options.

  [7] press FAX to initiate a fax to this phone book entry.

  My users find it much easier to have their phone numbers pasted on the machine where they can connect looking them to instead scroll through menus, for the right option.

  It seems that there is some sort of disconnect between hardware, firmware, and technical writers on this machine, because this ancient feature has been neglected, and the user guide is left to sputter on the issue.

• Laser Jet MFP M127FW Pro: Will not stop "hologram fax page 1" and is stuck in this mode

  I have Laser Jet Pro MFP M127FW.  This morning, a fax came through, and printed, however, the touchscreen rpet ' Print Fax: 1 Page, "with absolutely nothing to print.  I can now no longer print documents, or send and receive faxes again.    When I leave on this screen, the message disappears and comes back about a minute later for inactivity.  I tried to unplug and plug the unit in the.  I tried to use the switch to stop the machine.  When the powers of the slot machine, he will immediately return to the ' print fax Page: 1. " I tried clear memory and also the power resets. I keep reading on a Ret NVRAM and I would try it, but can't find anywhere it is displayed!

  It is a real problem for me because I use the fax machine throughout the day!  Can someone help me?  Thank you so much in advance!

  Hey @nhorn1115,

  Welcome to the Forums of HP Support!

  I understand that you have a fax job that will not print from your printer Laserjet M127fw range. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. When done, remove the cable from the back of the printer's fax. Now:

  1. Click on the configuration icon that looks like a key.
  2. Click on Service.
  3. Click Fax Service.
  4. Click clear saved faxes.
  5. Connect the cable of the fax.

  Please let me know if this clears the stuck fax. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Laser Jet 8600 Plus: re - set the printer for new wireless router. I use a Mac.

  I just installed new internet.  How can I reset my HP Laser Jet more than 8600 to print?  I use a MAC not a PC!

  You can use the Control Panel before the printer via the network settings menu.

• HP Officejet Pro 8600 N911a: HP Officejet Pro 8600 N911a - Print when Fax is not saved

  Can I do so a fax is printed when it is not registered?

  I know that I can put to print and save every time, but I trust HP digital fax to save paper.

  If a fax is not registered, either because of a network error, or if the computer that logs usually in is cut off, can just fax be printed?

  @MrMeow, it's nice to meet you.

  I think I found something that can help your fax dilemma.

  This information has been in the User Guide for the Officejet Pro 8600 e-all-in-one - N911a; PG 69.

  Set up backup fax

  According to your needs best and security, you can configure the printer to store all faxes it receives, only faxes it receives while the printer is in an error condition, or none of the faxes it receives.

  The following fax backup modes are available:

  On >  The default setting. When backup fax is enabled, the printer stores all faxes received in memory. This allows you to reprint up to eight more recently printed faxes if they are always saved in the memory.

  NOTE: When the memory of the printer is low, it replaces faxes print, older because it receives new faxes. If the memory is full of unprinted faxes, printer stop to answer incoming fax calls.

  NOTE: If you receive a fax that is too large, as a very detailed color photo, it cannot be stored in memory due to limitations of memory.

  Error only > Causes the printer to store faxes in memory only if there is an error condition that prevents the printer to print the faxes (for example, if the printer is out of paper). The printer continues to store incoming faxes, as long as the memory is available. (If the memory is full, the printer stops responding to incoming fax calls). When the error condition is resolved, the faxes stored in memory automatically, print and then they are deleted from the memory.

  Off >  Faxes are never stored in memory. For example, you might want to disable fax backup for security reasons. If an error condition occurs which prevents the printer to print (for example, tracks paper printer), the printer stops responding to incoming fax calls.

  NOTE: If the backup fax is turned on and you turn the printer off, all faxes stored in memory are deleted, including any unprinted faxes that you might receive while the printer was in an error condition. You must contact the senders asking them to return the unprinted faxes. To get a list of faxes that you have received, print the Fax log. The Fax journal is not removed when the printer is off.

  To set backup fax from the printer control panel

  1 tap (right arrow) and select Setup.

  2. press Fax Setup, and then click Advanced fax setup.

  3. press on the backup Fax reception.

  4. press on , error, or out of service.

  Reprint of faxes received from memory

  If you set backup fax mode to On, received faxes are stored in memory, whether the printer has an error condition or not.

  NOTE: After that the memory is full, the oldest faxes, prints are replaced as new faxes are received. If all stored faxes are not printed, the printer does not receive fax calls until you print or erase memory faxes. You can also delete the faxes in memory for purposes of confidentiality or security.

  According to the sizes of the faxes in memory, you can reprint up to eight more recently printed faxes, if they are still in memory. For example, you will need to re - print your faxes if you have lost the copy of your last draw.

  To reprint the faxes in memory from the printer control panel

  1. make sure you have loaded paper in the main tray.

  2 tap (right arrow) and select Setup.

  3. touch Tools , or Faxand then select reprint faxes in memory. The faxes are printed in reverse order, where they were received with the most recently received fax printed first, and so on.

  4. If you want to stop reprinting the faxes in memory, press the Cancel button.

  Please let me know if these steps solved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• Laser Jet MFP M127fw Pro: Cannot connect printer Aio App

  I can print via wifi from the printer, but the remote Aio app will not pick up the printer. The installation of word does not appear in the name of the printer.

  Hello

  The HP Laserjet M127fw is not supported by the HP AIO Remote application, not for scanning, or for setting up the printer on your wireless network, any application supported by your printer, is listed below:

  http://support.HP.com/RS-en/document/c03722645

  What task you want to achieve by using the application? as there could be another option for your printer.

  Kind regards

  Shlomi

• HP LaserJet MFP M127fw Pro do not print anything other than its own config

  Just bought a MFP HP LaserJet Pro M127fw.  I can't do print using any kind of connection to the printer.

  I can connect to my Ubuntu PC printer and my Android phone, but when I try to print, the job just hangs, never the slightest error, but never finished.  I tried printing from various applications, including tools HPLIP, but reports of the use of a test 'treatment' page

  When I try to print a fact sheet on the front panel of the printer, it asks me to confirm, but then nothing happens.

  I can connect to the web server of the printer, but clicking the print information button it does nothing.

  I have connected successfully with ePrint service of HP using the email address declared of the printer, but reports of the service 'problem with printer '.
  
  I don't know what else to try here.

  Hi richRemer,

  I see that you are having problems printing from the computer and the Android phone.
  I'll be happy to help you.

  Cycle power to the router and the computer.

  I would do a power reset the printer. When the printer is still lit, disconnect the power cable from the back of the printer. Then, disconnect the power cable from the wall outlet. Wait 10 seconds and reconnect the power cable to the wall outlet first, then the back of the printer and turn on again.
  
  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

  Print a self test equipment. Find out what is the IP address.

  Print a Configuration report.

  I provided with the driver for Linux OS Support.

  If you still have questions please go to the page of Linux support.

  Thank you.

• HP LaserJet MFP M127fw Pro do not print

  Just bought a M127fw of MFP HP LaserJet Pro and is about to return it for a refund.

  While it will print a diagnostics page and the copier seems to work, it will not display a wireless information page, and I can't seem to print a document from my PC, phone, ePrint or any other method.

  I tried to print the information page of the front panel of the printer as well as the web server.  In both cases, clicking the button simply does nothing.  The printer displays no message indicating a problem.

  I have connected the printer to my Ubuntu PC (tried JetDirect/AppSocket and IPP), but the print job hangs just with "treatment" or "stopped".

  I have connected the printer to my Android phone, but just printing crashes.

  I have connected the printer to service of HP ePrint (using the email address listed by my printer).  Here it shows 'Problem with printer', which is my only indication that something is wrong.  The site directs me to check the front panel of the printer for more information, but there is nothing there.

  I don't know what else to try here.

  Resolved in this post: http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/HP-LaserJet-Pro-MFP-M127fw-will-not-print-anything-except/m-p/3836740/highlight/false#M52766

• laser jet mfp m177fw pro color: unable to receive faxes

  I peut send a fax to everyone but may not receive from the fax from anyone. I need your help. Thank you.

  Hi @sarah_aleyt ,

  I see that you have problems to receive faxes, but you can send faxes. I will definitely do my best to help you.

  Check these settings on the printer:

  Confirm the fax number:
  Go to settings, fax facility, advanced Setup, confirm Telec.

  Disable error correction:
  Go to Configuration, service, facsimile, error correction and turn if off.

  Adjust the speed of fax in the Middle:
  Go to settings, fax setup, advanced configuration, speed of fax and select medium.

  Disable the private reception:
  Go to Configuration, advanced setup, private receive fax configuration. Turn the power off.

  Test the fax.

  If the problem persists, try the procedure described in this document to see if it will solve this problem.

  Cannot send or receive faxes.

  Updated the firmware of the printer if the problem persists. HP Color LaserJet Pro M177fw MFP drivers.

  Please provide detailed results if you're still having problems.

  What were the results of the test of fax?

  What type of connection do you have? (Analog, DSL, cable Modem)
  You use the phone cable 2 son?
  You have a special ringtone that is put in place on the line?
  Are there set up voicemail?
  You have an autoresponder? (Where it is connected to?)
  Where did the fax cable connected to? (modem, outlet)
  Is there a phone as connected the printer?

  If there is anything else I can help you, let me know.

  Good day!
  Thank you.

• Color Laser Jet MFP M177fw Pro: Duel side printing

  Is it possible to put this machine do Duel back?

  Hello

  Your ony printer supports duplex MANUAL , which means that you have to turn the paper yourself using the instructions of the software on your computer. It will print odd/even pages first then ask you to convert documents and continue to print the odd pages.

  http://WWW8.HP.com/au/en/products/printers/product-detail.html?OID=5303445#! tab = specifications

  You must follow the directions on the pages or will come out in the order.

  Kind regards.

• Color Laser Jet MFP M277dw PRo: delay in printing

  It takes more than 30 minutes for my print job print. Is it normal? I have a Mac

  Welcome to the HP Forums @cbyrd,

  I understand your print jobs take more than 30 minutes to print and you would like to know if this is normal. This is not the expected behavior, and I'd be happy to help you.

  We will restore the printing system, repair disk permissions and add the printer:

  Reset the printing system

  1. Click on the Apple icon and then click on System Preferences.
  2. In the hardware section, click Print & Fax/Scan. The Print & Fax/scanning dialog box opens.
  3. Do a right click (or Ctrl + click) in the left panel and then click on reset printing system...
  4. Click OK to confirm the reset.
  5. Type the name and the correct password.
  6. Click OK to reset the printing system. The Print & Fax dialog box shows any selected printer

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Repair disk permissions (If you have 10.11 use these instructions, otherwise move to the next set of disk Permission repair instructions).

  • Click on your desktop so that it is written next to the Apple Finder icon, and then click OK (you will see this next to the Finder after file, edit and view).
  • Under Go, click Applications.
  • In Applications, select utilities.
  • In the Utilities folder, you will see disk utility, double-click on this icon to open the disc utilities.
  • Click on your hard drive, and then click first aid. Click OK to allow it to run.

  Once the repair is complete, restart the computer and download and install the printer HP for OS X drivers.

  Repair disk permissions

  1. On the Dock, click Applications, then utilities.
  2. Double-click disk utility.
  3. Highlight your hard drive / partition on the left (by default this is "Macintosh HD").
  4. Click repair disk permissions at the bottom of the window.
  5. Once the repair is complete, restart the computer and download and install the printer HP for OS X drivers.

  When you add the printer, please ensure that you use the HP driver.

  1. Select Add another printer or Scanner
  2. Select the printer that you add, and next to the 'use', you can select the printer driver

  Please let me know if that solves the problem and click the accept button Solution below to report your post as solved. If the problem persists, I would like to know how the printer is connected to your wireless mac, USB, or Ethernet cable network and let me know what version of Mac you have too please.

  Thank you.

• Laser Jet MFP M125nw Pro: Add a printer to the network WPS button

  
  

  Hello

  Do you have any computer? Pop the CD on your computer and start the installation. 10 minutes or more and the work to be done.

  Kind regards.

• LaserJet MFP M277dw Pro: problem with printing issue

  We have the model HP laserjet MFP M277dw, we love it, but have been a problem with what looks like small pink flies on one side of the paper when it is printed, is there a setting that turns off or what is the cause, thank you

  UPDATE: took MFP and was checked by techie printer, tried a new toner and does no differenct so he rang HP and they replaced the MFP, it was still under warranty

  Thanks to those who have tried to help

• How to clear an hp laser jet m1217nfw that is stuck on initializing

  printer flashing and stuck on initializing

  If the unit is locked during initialization, then it might be something in the firmware of the printer.  Before you perform a reset, make sure that all the troubleshooting steps are completed.  I'll link the document to troubleshoot a non-responsive printer below.

  The printer will not turn on or respond

  If the steps do not help, then follow the reset of the information that I will send you via private message.  Before this type of reset, please read Bob_Headrick wire on the reset of the printer.  This thread can be found here.

• HP laserjet mfp m127fn pro: cannot install printer

  Hi I do not know how to install the drivers and software for this printer, can anyone help out me?
  Thank you

  Hello

  Can try to uninstall and reinstall the drivers?

  Thank you.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement.