Display record single readonly

Similar Questions

• Is it possible to display a single element on a treemap?

  Hello world

  I have a small question... (I use jdeveloper 12.1.2.0.0 and the database to oracle - HR)

  I have a treemap showing salary by departments, like this:

  -Administration, €50000

  -€40000

  -etc.

  When I select one or more departments, the treemap is updated to display only the selected departments but whenever I select one, it gives me: "no data displayed".

  I can't show a treemap with just a single value on it? It must have at least 2 elements?

  If I can do it, how can I to do?

  Thank you all and my best regards,

  Frederico.

  Hi Frederico,

  I can't see what you want to achieve. I don't think that this element has been designed for 1 element that has no children. I think the only way to display a single element adds a new level to the treeMap when you create (in this case, employees). Otherwise the treeMap would become redundant and without showing significant since information there is no data to compare and map.

  Concerning

• AF board display a single line

  I use jdev 11.1.1.5
  
  I dropped a table af... I want on UI for it to display a single row (a first)... I don't want that it displays all the lines
  
  What property should change... I remember in 11.1.1.3 there was a building known as lines, but do we have nothing in 11.1.1.5

  Or add the VO even for the modules of applications data model using a different name, click on the edit button on the top of the face of data model and change the knot tuning to return a single line for the VO. Then you have a VO which returns all the lines you use for the tables and which returns a single row.

  Timo

• How to display records with zero on dashboard

  Hi expert,
  
  If I have a product dimension table,
  a fact table
  
  
  If there are records containing values in the comic book, A product void.
  
  If the logical column of the fact is SUM (...).
  
  How to display records with values null in the dashboard.
  
  Use the outer join?
  
  or another method?
  
  I don't want to use outer join because it makes the PRD be so complicated

  Jin
  Pull all of the columns in the criteria, it will show NULL for a product

  For zero, on the done column use IFNULL(fact_col,0)

  that looks like this

  http://a.imageshack.us/img180/6616/Ifnull.jpg

  Thank you
  saichand.v

• How to display a single record.

  Hi gurus,
  
  Here my requirement is that I have 2 pages.
  first page seen numero_projet lov, create and tableRN.
  
  Once u Select the projectnumber and click on the button create, it of go to the second page, enter data and click on the submit button it'll insert in the database table and go to the pottion page and display the data in tableRN u what ever insert data (that part is over).
  
  but the problem is, in tableRN shows all the records (as posted earlier recordings)
  My requirement is to display only one record (click the button submit registration only).
  
  Please help me
  its very urgent.
  
  Thank you
  Sandrine.
  
  Published by: its urgent on January 3, 2012 22:52

  Monique,

  you want to display the inserted row...

  Kind regards
  GYAN
  www.gyanoracleapps.blogspot.com
  www.querenttech.com

• Display records with a special character to the end user

  Hello
  
  What follows with the exception of special characters such as the comma, colon (:), space, preview, brackets [], parenthesis(), key entry, quote (') single, the double quotes (""), full stop (.), slash (/) forward, backward slash (\), + (plus), % (percentage),?) (questionmark), # (pound sign)
  
  -> if anyone is available in the record, I want it back and also show the special character. for example, retrieval must be id 21, 22: 16
  -> also I want a list of special characters like message in the sql
  for example, 16 ID, (¶, §) must be displayed in the output
  
  
  
  WITH abc AS
  (
  
  11 SELECT ID, ' he is suffereing
  jaundice"summary FROM DUAL
  UNION ALL
  Order 12, "we can go to the bus stop. OF THE DOUBLE
  UNION ALL
  SELECT 22, 'a mΦnsoon is provided affect≈the region during the next φ a few days' OF the DOUBLE
  UNION ALL
  SELECT 16, "Film¶city looks like go§d." DOUBLE
  UNION ALL
  SELECT 21, "The International @l ¥ mpic Committee moved the bike could Calm fears scratching the Olympic Games." OF THE DOUBLE
  UNION ALL
  SELECT 17, ' John F Kenny was a "young president" America "OF the DOUBLE
  UNION ALL
  18 SELECT, ' the Department of elections, identified (10) polling stations for voters to go to
  thei\r January 26 vote for the by-election of Punggol East Single Member constituency ' FROM DUAL
  UNION ALL
  SELECT 19, "the pilot of the helicopter that + crashed in Central London were thousands of"
  hours of experience of aviation including flight % for films such as die another day and save #Private #Ryan?' THE DOUBLE)
  Select id, summary, 'show special char' in splch
  ABC
  ;
  
  OUTPUT
  SUMMARY of the splch ID
  
  Film¶City 16 looks like go§d. ¶§
  21 the International @l ¥ mpic Committee moved the bike could Calm fears scratching the Olympic Games. @¥ O
  22 a mΦnsoon is planned for the region during the next φ affect≈the days Φ≈φ

  Hello

  Here's one way:

  WITH     got_special_characters     AS
  (
       SELECT  id
       ,     summary
       ,     REGEXP_REPLACE ( summary
                        , '[][[:alnum:],: ()''"./\+%?#'  ||
                              CHR (10)                ||
                       '-]'
                        )     AS special_characters
       FROM    abc
  )
  SELECT       id
  ,       summary
  ,       special_characters
  FROM       got_special_characters
  WHERE       special_characters     IS NOT NULL
  ORDER BY  id
  ;
  {code}
  Inside square brackets, the characers ']' and '-' have special meanings, unless you use them in places where the special meaning can't apply.  That means the ']' must be the first character inside the square brackets (Oracle assumes you're not ending the set right after you begin it) and the '-' must be the very last character inside the square brackets.
  Depending on what newline is on your system, you may want to use CHR (13) in addition to, or instead of, CHR (10).
  
  it would be more efficient to use the TRANSLATE fucntion, rather than REGEXP_REPLACE, to produce special_characters.  You'd have to list all 80 or so of the non-special characters, but you'd only have to do it once.
  {code}
  WITH     got_special_characters     AS
  (
       SELECT  id
       ,     summary
       ,     TRANSLATE ( summary
                   , '=0123456789ABCEDFGHIJKLMNOPQRSTUVWXYZabcedfghijklmnopqrstuvwxyz,: -[]()''"./\+%?#'
                         || CHR (10)
                   , '='
                   )     AS special_characters
       FROM    abc
  )
  SELECT       id
  ,       summary
  ,       special_characters
  FROM       got_special_characters
  WHERE       special_characters     IS NOT NULL
  ORDER BY  id
  ;
  

  Published by: Frank Kulash on 16 January 2013 12:35
  TRANSLATE the code added.

• Modify a calendar to display on single items by date

  Hello
  
  I have a small calendar in monthly view that I use to display dates in a table (this is a journal application). I display an image the area of the calendar day if there is data, but the image is displayed for the number of events happening that day. So if there are 4 events calendar January 13 then I get 4 images in the same day box.
  
  How can I configure it so that it shows only 1 image regardless of the number of events on the Agenda? And no images at all if there is no event for this day there?
  
  I use Apex 4.0.2.00.06 on 11G hosted by a 3rd party.
  
  Thank you
  Andrew

  Hi André,.

  The number of images depends on the number of records found for this date. Therefore, you must reduce to a single record per day. Assuming that you don't need to use the links to the individual records, you could do something like:

  SELECT DISTINCT
  HIREDATE,
  TO_CHAR(HIREDATE,'DD/MM/YYYY') LABEL
  FROM EMP
  

  Which must be created as a SQL calendar instead of a simple calendar to allow you to specify the SELECT statement full of yourself.

  Replace the TAG line with everything you want - you can create the tag IMG here, if necessary.

  Andy

• How to display records of entry into Modbus in hexadecimal?

  I am connected in series to a relay, and by reading the registry entry to 1 address, I get 580 which is the version of the firmware of the relay and is therefore correct. Is it sort of, I could get the output as the full header modbus IE: (address: additional function: data: error code check/crc) for example: Fe, 02, 44, 80, 00, 02, F8, DC?

  Also when I am trying to write to a single coil, which is the reset of the system, I don't know what address to use for the block of writing simple microphones. I know that the function is 5 and the operation code for this relay is 0001 but do not know how and where to use the code of operation?

  Attached the VI is used to read the registry as well as documentation on the reset command and application Modbus for relay

  Set your "String to write" command to the spell of display.  Then type the hex values.

• Sum on multi block record for only displayed records

  Dear all,

  I've been invited below question on interview session and I really do not come upwards with a logic to accomplish.

  In a multi record block, not the displayed items property has the value 10. In this block, an element is placed named current_rate (Number data type).

  While the form is running, it will display 10 records, and I need to display the sum of the current_rate for these 10 records. When I scroll to display multiple records, this amount must also be changed based on the record number of display. Is it possible to make forms to operate this way?

  Please advice.

  Thank you and best regards,

  The roots.

  Another way - create element (e.g. "sum") in a block of control (for example, "cb") and write this:

  -Prior REQUEST for the block of data (for example "E1")

  : cb.sum: = 0;

  -After REQUEST for the block of data (for example "E1")

  : cb.sum: =: cb.sum +: emp1.salary;

  Query the property size array in a data block (specifies the maximum number of records Form Builder to retrieve from the database at the same time)

  must be 0 (default = the number of records can display the block, as indicated by the property of block number of records displayed).

  Concerning

• Re: How to display records of newlyadded first in the table

  Hi all

  I use Jdev 11.1.2.3.0

  My requirement is I have a table in this table, I have a table and the form. Here, I want to display newly added records, first in the table.but that table always shows of old recordings first.so how do I display it.can someone help out me.

  Thank you

  G.Shilpa.

  You can control the line newly inserted into the table of the ADF

  http://lucbors.blogspot.in/2010/12/ADF-11g-how-to-control-where-new-row-is.html

  ttp://mjabr.WordPress.com/2011/07/02/how-to-control-the-location-of-the-new-row-in-aftable/

• OIA display record limit 500

  Hi all
  
  on a GUI of OIA (warehouse of identity) when I search a user record display limit is 500.
  In what XML or properties of this limit is expandable?
  
  Thank you.
  
  Carlo.

  Hey Carlito,

  Try to edit the context.xml - search, around line 18

  Don't forget to clear the cache on that also

  If that doesn't work I'll have a deeper look, I did it before if it's something you remember never :-)

  Kind regards
  Daniel

• How to display records by several XMLTABLE() NULL

  First of all, let me provide the test SQL INSERT and CREATE TABLE data:
  

  create table xml_t2 (xml_raw XMLTYPE);

  Insert sql, a little long... just copy and paste, then run it will be OK!
  the system warns: your message exceeds the maximum length of 30000 characters.
  So, I place it on the space of shariing mediafire

  http://www.mediafire.com/?npmot6lgl86dgli

  Tests of SQL:

  SELECT t1.years, t1.months,t1.days,t1.hours,t1.value,t2.value
                  
          FROM xml_t2,
          XMLTABLE ('$d/cdata/F1' passing xml_raw as "d" COLUMNS years integer path '//year', months varchar(3) path '//month', days varchar(2) path '//day', hours varchar(2) path '//hour', mins varchar(2) path '//minute', value float path '//value') t1 ,
          XMLTABLE ('$d/cdata/F2' passing xml_raw as "d" COLUMNS years integer path '//year', months varchar(3) path '//month', days varchar(2) path '//day', hours varchar(2) path '//hour', mins varchar(2) path '//minute', value float path '//value') t2

  The condition at the moment is... In the xml data, I deleted the month "Jan" with the < F2 > tag that is in 2010.
  This means that the XMLTABLE t2 output will not contain records of "Jan", but it is still in XMLTABLE t1.
  
  The problem is that when I use the SQL above to display the t1.value, that it will not display the t1.value in Jan 2010... it just jump "Jan" and becomes "February"...
  to view what I prefer, it is something like this:
  

  YEARS MONTHS DAYS HOURS t1_value t2_value
  ----- ------ ---- ----- -------- --------
  2009     Jan    01   01       8       8
  2009     Jan    01   02       8     580
  2009     Jan    02   01     580     580
  2009     Jan    02   02     580     580
  2009     Feb    01   01     440     440
  .....................
  .....................
  2010     Jan    01   01     627     NULL
  2010     Jan    01   02     627     NULL
  2010     Jan    02   01     367     NULL
  2010     Jan    02   02     367     NULL
  2010     Feb    01   01     367     849
  2010     Feb    01   02     849     849
  ....................
  ..............

  Then... the main problem is how transparent back in January 2010 in t1 XMLTABLE record and assign null to the XMLTABLE t2 since it doen't contains this month record.
  
  THANKS for the help!

  The following code generates the desired result on the 11.2.0.2 version, and it indexes the beaches of analyses on the index.

  SELECT t1.years, t1.months,t1.days,t1.hours,t1.value,t1.value2
  FROM xml_t2,
  XMLTABLE ('$d/cdata' PASSING XML_RAW AS "d" COLUMNS
  YEARS INTEGER PATH 'F1/name/year',
  MONTHS VARCHAR(3) PATH 'F1/name/month',
  DAYS VARCHAR(2) PATH 'F1/name/day',
  HOURS VARCHAR(2) PATH 'F1/name/hour',
  MINS VARCHAR(2) PATH 'F1/name/minute',
  VALUE FLOAT PATH 'F1/name/value',
  VALUE2 FLOAT PATH 'F2/name/value') T1;
  

  If you think that my answers are "useful" or "correct" Please mark as well.

  A XMLTABLE expected to perform generally better than two.

• How to display records from the xml file

  Hi all
  I created a region his area of research in reality
  with 5 elements and array of result area
  
  I want to search records based on the 5 elements and want to view output table
  
  
  I have the table name as hr_api_transactions, which contains many columns
  
  
  
  and also, this table contains a column
  name TRANSACTION_DOCUMENT of type CLOB()
  that files xml columns for each record
  I want to extract data from this xml file and want to display.

  Instance of the view - put the name of VO with which you are extracting data

  Discover the attribute and the attribute of file View - could see attribute by which you found the content of the file

  File name substitution - is not mandatory, let him

  The MIME type of the file: do not place anything, need to better manage programmatically through. Put the code in the below processRequest() method

  OADataBoundValueViewObject contentBoundValue = new OADataBoundValueViewObject(downloadBean,
    "FileContentType"); // here "downloadBean" is bean of message Download item
  downloadBean.setAttributeValue(FILE_CONTENT_TYPE, contentBoundValue);
  

  -Anand

• Display records between 2 dates in a report

  Hi all
  I have a requirement where I need to display the records in a report between 2 date. We have Fromdate and so far
  as a guest to the dashboard when it is selected in a Pivot report data between these 2 dates selected should be displayed.
  
  Thanks in advance,
  Krishna

  Hello

  Set the filter of the columns is invited to enter this date in your report.
  Create your prompt for column and operator set is between and the calendar control.

  Concerning
  Nicolae

• How to display records #Total #!

  Hi all
  
  In my application, there is a button in the view, when you click on view button I display all records nearly 100 recordings. So for the end user to do scroll down to check how many records are available.
  
  Now it ask me to display the total none of the records before making scroll down.
  Is it possible to display the total no record?
  
  Thanks in advance,
  David...

  Hello

  As the strresult_arr table is filled to the top of the code using:

  ...
  BULK COLLECT INTO strresult_arr, ...
  ...
  

  You can use anywhere after that. In fact, the next line of code is:

  htp.p('<table cellpadding="0" cellspacing="0" style="background-color:#EEEEEE">');
  

  starting your report table, so you could put the new higher than line

  Andy