Display resolution is deformed.

Similar Questions

• Previously, during display of the image (photo) in the tab, it displays the resolution of the image, how to recover the photos (pictures) display resolution?

  Previously, during display of the image (photo) in the tab, it displays the resolution of the image, how to recover the photos (pictures) display resolution?

  You bring up the title bar via the "Title bar" button at the bottom left in the palette to customize window

  • Firefox menu button > customize > title bar
  • https://support.Mozilla.org/KB/learn-more-about-the-design-of-new-Firefox

  

  See also:

  • https://support.Mozilla.org/KB/how-to-make-new-Firefox-look-like-old-Firefox
  • https://support.Mozilla.org/KB/common-questions-after-updating-to-new-Firefox

• Toshiba Satellite A100-683 - display resolution of 1280 x 800

  Hallo,

  I just had an upgrade from Windows Xp to Windows 7.

  I downloaded and installed all the drivers for this model of Toshiba web site, including the ATI mobility radeon X 1600 driver and the Mobile Intel (r) 945 GM Express Chipset controller 0.

  Later, while trying to set the resolution of the screen, I realized that I could only choose between 1024 x 768 or 800 x 600, but I don't know that before the operation I could put also the resolution of 1280 x 800 (maximum display resolution). In fact, the display resolution was much better than now.

  Can you help me please? How can I return to the maximum display resolution?

  Thank you very much in advance and greetings.

  Antonio

  Once more here to add some details: I tried to install the ATI mob. rad + Nvidia drivers, which can be downloaded from this site for Satellite A100-683 + windows 7 display.
  The second (Nvidia) seems to be the right one, as stated in the description (improves the features of the screen and allows different settings, etc.), but it doesn't seem to work.

  Any help? Thanx

• Satellite Pro A300-28R - Windows startup with a wrong display resolution

  OK so I have a Toshiba Satellite Pro A300-28R with Windows 7 64 bit and an ATI Mobility Radeon HD 3470 graphics card.

  Recently, I have connected my laptop to a TV using the S-video connection. It worked well. The problem is that since then, and every time I start my laptop Windows starts with S-video of 600 x 800 display resolution.

  I tried changing the settings in the Panel and using the ATI CCC, having once selected and applied these settings, but whenever Windows starts now it starts with the above display resolution.

  As a result, I've also uninstalled and reinstalled my display driver both package Toshiba value added but the same problem persists. I searched with Google about this problem and have not been able to find something useful.

  Any help would be greatly appreciated.

  Hi dude

  How did you produce the video signal?
  Did you choose Office expanded or all simply the option external monitor by using the FN + F5?

  I think that you need to press once more the Fn + F5 and should switch to a view, internal laptop display.

  Please check if this could help you!

• Re: Satellite A350D-114 - how to change the display resolution?

  Hello

  I have Toshiba Satellite A350d 114. The screen resolution is 1366 x 768.
  But I want to change for example 1280 x 1024, but I can't.
  I wish I had a longer high reolution (768 above).
  What should I do for this?

  Thanks for the replies.

  Piotr

  Vasja is right. You should offer more information.
  When you buy laptop and use it with the settings of the right display driver is pre-installed and the resolution of the screen on the right will be defined by default.

  So the question is: what you do or what you've done with your laptop? with the right display driver, you should be able to use the waterproof display resolution.

• Satellite P300 - display resolution incorrect if the external monitor is connected

  I wanted to use a monitor BENQ of WAP 2010 with my Satellite P300 laptop operating system is Windows Vista Home Premium 32-bit.

  When I connect it, the display resolution changes to an unusable.
  I installed the latest ATI drivers that I downloaded from the Toshiba site. Max screen resolution is 1680 x 1050. This resolution no longer exists after the connection of the monitor.

  Also, I can't set the correct resolution for the LCD display of the laptop more.

  How set up the screen, so that the monitor displays a clone of the LCD screen for laptop and find the correct resolution?

  Hello

  > Max monitor resolution is 1680 x 1050. This resolution no longer exists after the connection of the monitor.
  Please understand that not all possible solutions are supported by a graphics card chip or a graphics card driver.
  If one of the parts mentioned would not support this resolution then you will not be able to choose and use the external monitor!

  In your case, I recommend the manual of your laptop.
  There you can find a list of available external resolutions and supported.

  Welcome them
  Markus

• Display resolution of the M60-139

  Hello

  I recently played a bit with the M60-139 with a local Distributor. Their presentation text, said that the characteristics of the M60 a TFT display resolution of 1440 by 900 pixels, while toshiba.com specifies 1280 by 900.

  Can anyone confirm one or the other value?

  Thank you.

  Hello wet

  I found an info display resolution depends on the graphics chip. There are two different graphics chips for Satellite M60:

  ATI MOBILITY RADEON X600SE - resolution (1440 x 900)
  ATI MOBILITY RADEON X 600-resolution (1280 x 800).

  I recommend buying the first because there 17.0 "TruBrite (1440 x 900) discovers Wide 16:10 color TFT display. The picture quality is amazing.

  Good bye

• Qosmio G30 - E10: display resolution changes from 1920 x 1200 to 1024 x 768

  Hello

  Display resolution of Qosmio G30 - E10 passes sometimes 1920 x 1200 (my default) to 1024 x 768 after returning from standby or Hibernation

  I run Vista Ultimate, most recent display of the download area of Toshiba driver.

  This happened at any time, but sometimes.

  Any solution to this situation of bases.

  Kind regards

  Uwe Meyer, Germany

  Hello

  It's really not easy to say why it happens. I think that it of difficult to reproduce this problem, because it happens that sometimes ;(
  You said you are using Vista Ultimate.
  Have you checked if this happens using the Vista OS since the Toshiba Recovery CD?

  It would be very interesting to know if this occurs on laptop with Toshiba to factory settings.

  I found a thread on a similar theme;
  Someone suggested to update the graphics driver.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22553&MessageID=82906

  Perhaps a graphic driver of the www.omegadrivers.net or www.laptopvideo2go.com might help.

• Display resolution in Safe Mode and its registry settings

  How can I find and change settings to the registry display resolution? And also is it possible to change the display mode without failure resolution?

  Hello Coolcool1227,

  As I said in my previous post that the resolution of the screen does not work in safe mode. So, you cannot increase or decrease display in safe mode resolution.

  Hope this information helps.

• Change not anchored to a specific display resolution (HP Zbook15 with adapters dual display)

  My HP Zbook 15 contains both an Intel HD 4600 Graphics and an NVIDIA Quadro K1100M graphics cards. When I remove my laptop it seems to use the Intel card (Intel HD Graphics of icon in the task bar). I think that this display adapter limits the choice of my resolution of screens. I would use a resolution of 1280 x 720 for presentations on the web.

  Anchored with connected screens, it uses the NVIDEA card that offers a wide range of display resolutions.

  Question: Is this possible undocked to switch to the NVIDIA graphics card or add a display resolution of 1280 x 720?

  Thank you

  René

  I could solve it myself by downloading the latest Intel driver from HP's Support web page.

• U3014 + PS3. Problem with the display resolution?

  Hello!

  PS3 cannot expose to a resolution of the screen for Dell U3014. I use the HDMI-HDMI cable. In the attempt of a choice display resolution in the settings of the PS3 when it test the monitor may not issue image. This means that an installer of the screen may not be complete. Now the installation of the screen program gives 576 p. As you understand, it is impossible to play on it. Please help with a problem.

  Thank you.

  Niko7,

  The U3014 HDMI port can do 1920 x 1080 (1080 p).
  * With the monitor and the PS3 on and using a HDMI to HDMI (not a DVI to HDMI) cable right, turn off the PS3 via the power switch on the back and then turn back with this same switch
  * Press and hold the power button on the front of the PS3 until you hear 2 beeps. Once it turns on, the screen should display a message something like: "an HDMI cable has been detected, you want to set up?
  * Then go here to set the video output to your TV/monitor
  http://manuals.PlayStation.NET/document/en/PS3/current/settings/videooutput.html
  * When you go through Setup for HDMI setting, you will need to check what your monitor video output modes supported (480i/480 p/576i/576 p/720 p/1080i/1080 p)
  * After you go through the intial setting HDMI menu and displays your PS3 via HDMI cable, on the main menu of the PS3, go to settings and then scroll the display settings. In display settings, put the full range RGB (HDMI) to full and put Y Pb/Cb Pr/Cr super-white (HDMI) on we

• Display resolution of poor on HP Touchsmart j003cl want

  People,

  So I just got the j003 Touchsmart from HP Envy with 16 GB, 1 to and i7 processor and the Intel HD Graphics 4600.  I love everything about it, except that the display quality is the worst I've seen from a laptop in 5 years.  Its Win8.1 running.  I have to think that there is a way, this can be improved.  I followed some advice on these forums, remove display drivers and reinstall the chip intel pilot followed by the HP - still awful display driver.  Totally unacceptable for such a system.  Knowing what I know now, I wish that I got with the chip nVidia video.

  in any case, I'm almost ready to get back to that now, but hoping someone can help me with something to improve display quality/resolution.  The max resolution on it's 1366 x 768 and grainy as hell.

  Advice on how to improve this display quality or even the possibility of uprading the chip.

  Thanks in advance.

  FS

  HI Kaabother,

  I hope you had a good weekend.

  I provided you a link toPC portable HP ENVY 15 and HP ENVY TouchSmart 15 Notebook PC Maintenance and Service of Guide. Please note page 4 under the appliance. You will notice that there are 3 different views that can come with this system.  The specification for your model http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/Poor-display-resolution-on-HP-Envy-Touchsmart-j003cl/m-p/3528231#M82637 lists option 3 with a resolution of 1366 x 768.  Top of page option offers the setting you are looking for, you would need to replace the current screen, the top.  I hope this has helped

• For the host operating system and the display resolution

  Hello.
  It has been upgraded to Windows 10 Home (OSBuild10586.218) of the host OS Windows 10 Home (Build10240).
  Then, the virtual machine screen resolution is now low.
  Display resolution, has changed since 1912 x 855 to 1360 x 768.
  Will you be able to cancel the display resolution.
  The virtual machine is the Scientific Linux 7.2 Extra.
  Thank you.

  I have been using the VMware Workstation Pro 12.

• Display Client 5.0.1 not auto adjust / resize the display resolution

  I read every article I can find on the VDI configuration and configuration of the server connection view to auto setting of the display resolution.  My problem is that the width is auto adjust so I can see black borders on both sides of the screen.  In reading several manuals installation VDI for XP Pro, I have read several methods to set the various parameters and none do not work properly.  I read that while implementing the guest remember to install the VMWare Tools ' before 'to install the Agent, or there may be problems. "  The second trick is to set the prompt on 800 x 600 and PCOIP will automatically adapt to the display resolution the resolution of your computer 'customer '.  The third is the server connection for the value of the high resolution enabled and some articles defined on 2 screens and others say say to max it to 4. The fourth is to add the line svga.vramSize = (value in bytes) of the .vmx file and restart the client.  None of them allow the automatic adjust/resizing auto option works correctly when you run the client View 5.0.1.   In testing, I found the only way to make this work (sometimes) must open vCenter, right clicking on a prompt and by selecting "open console" and allows you to manually adjust the display of the prompt resolution to match the 'client' display resolution.  Tab 'Settings' is not available in the client display settings when connecting using the Client from the view, this is possible in the vSphere or vCenter client. Either way, it seems to work correctly is to use the RDP Protocol. When you use the RDP Protocol, it seems to auto adjust correctly. I would use PCOIP as my favorite protocol so that is the purpose of this post.  If there is a tip I read not somewhere I would greatly appreciate advice on getting this feature correctly configured.

  More information on client computers.  They are all laptops Dell E6410 running XP Pro with billboards attached to their default resolutions of 1440 x 900.

  Thanks in advance for advice.

  Yes, I see that it's a lot.

  Common practice should be to install the Agent discovered the last thing before the virtual machine snapshots.

  I'm glad it works for you now and thanks for posting back the resolution.

  Linjo

• How to change the display resolution of APEX?

  Hi guys,.
  
  How to change the display resolution of APEX?
  In other words, if an end-user sees large elements on a page, then it zoomed out there... How can I define a good zoom LENS for my default application...
  
  I hope that my question is simple...
  Kind regards
  Fateh

  Fateh says:

  I hope that my question is simple...

  Nope.

  How to change the display resolution of APEX?

  APEX is not a resolution of the screen. 'Screen resolution' is a property of the device, user agent software used to view the page APEX.

  What do you mean by "resolution of the screen of the APEX?

  In other words, if an end-user sees large elements on a page

  What "big items?

  then it the zoom out

  How?

  "Zooms", what - the whole page or 'big one '?

  How can I define a good zoom LENS for my default application...

  Which means what?

  And as usual, we are missing:

• Full version of APEX
  
• Complete operating system DB, version, edition, host
  
• Architecture of Web server (EPG, SST or APEX listener/host operating system)
  
• Browser (s) and version (s) used
  
• Theme
  
• Model (s)
  
• Region/item (s)

  You have been posting here for years. You know this basic information is needed to understand and reproduce problems.

  If you need help it does not seem unreasonable that you made the effort to provide a complete, clear but a concise description of the problem or need.