Display resolution of the M60-139

Similar Questions

• U3014 + PS3. Problem with the display resolution?

  Hello!

  PS3 cannot expose to a resolution of the screen for Dell U3014. I use the HDMI-HDMI cable. In the attempt of a choice display resolution in the settings of the PS3 when it test the monitor may not issue image. This means that an installer of the screen may not be complete. Now the installation of the screen program gives 576 p. As you understand, it is impossible to play on it. Please help with a problem.

  Thank you.

  Niko7,

  The U3014 HDMI port can do 1920 x 1080 (1080 p).
  * With the monitor and the PS3 on and using a HDMI to HDMI (not a DVI to HDMI) cable right, turn off the PS3 via the power switch on the back and then turn back with this same switch
  * Press and hold the power button on the front of the PS3 until you hear 2 beeps. Once it turns on, the screen should display a message something like: "an HDMI cable has been detected, you want to set up?
  * Then go here to set the video output to your TV/monitor
  http://manuals.PlayStation.NET/document/en/PS3/current/settings/videooutput.html
  * When you go through Setup for HDMI setting, you will need to check what your monitor video output modes supported (480i/480 p/576i/576 p/720 p/1080i/1080 p)
  * After you go through the intial setting HDMI menu and displays your PS3 via HDMI cable, on the main menu of the PS3, go to settings and then scroll the display settings. In display settings, put the full range RGB (HDMI) to full and put Y Pb/Cb Pr/Cr super-white (HDMI) on we

• For the host operating system and the display resolution

  Hello.
  It has been upgraded to Windows 10 Home (OSBuild10586.218) of the host OS Windows 10 Home (Build10240).
  Then, the virtual machine screen resolution is now low.
  Display resolution, has changed since 1912 x 855 to 1360 x 768.
  Will you be able to cancel the display resolution.
  The virtual machine is the Scientific Linux 7.2 Extra.
  Thank you.

  I have been using the VMware Workstation Pro 12.

• Pavilion p6150t: upgrade of the screw until the resolution of the monitor.

  I just upgraded my p6150t (originally running Windows Vista Home Premium 64-bit) Windows 7 Home Premium 64 - bit using the upgrade disc provided by HP at the time of purchase. The upgrade went well, except that HP Update was no longer on the system after the upgrade. In the case the opposite (even without running upgrade HP), Win 7 works well.

  However, I have a monitor Dell S2209W capable of running at a resolution of 1920 x 1200. With Vista, I could set my display at this resolution. However, with Windows 7, I can only set the resolution to 1280 x 800. I have the original disk for the Dell monitor, but it won't install the driver on this system with Win 7 (same result during the download of the latest version of the driver from the Dell Web site).

  For Vista, the graphics driver on the HP site for this computer has been for NVIDIA GeForce 6210.  But for Windows 7, graphics drivers only listed for this computer is of course ATI unified (in addition to the Intel graphics) driver. As the original graphic card is not ATI, an updated NVIDIA driver would solve this problem?

  Any other suggestions would be welcome.

  Thank you.

  Correction: it's Nvidia GEForce G210, NO 6210.

  In addition, for Win Vista, both the unified ATI graphics card and the drivers for graphic card NVIDIA GeForce G210 are listed, but for Win 7, only the ATI driver is listed.

  Sorry for the confusion.

  Hi there @Les
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff. I understand that you are having problems of display resolution after the upgrade to Windows 7 from Vista. I'm happy to help you with this.

  In response to your question, Yes, because it is a desktop computer you can try the driver directly from NVidia and test it.  You can also try to use the HP Support Assistant and see if she can find the updated or compatible drivers for your system hardware.
  HP Support Assistant
  With the help of HP Support Assistant (Windows 7, Windows Vista)

  Or the other choice is worth trying. I'm curious to hear your results.

• resolution of the iPad 3

  I have two applications of photography, ready to go, but I'm afraid I'll have to do it again with the new iPad fate with double the resolution. Should I just create larger images now, so I don't have to redo later?

  Hi Lisa,

  currently the iPad viewers will only see the leaflets that are the correct resolution, so you can always recreate the folios when the iPad 3 came out with double the resolution so that the rest of your content is of the same resolution. You must also take into account that put larger images that display resolution of the iPad (1 or 2) causes a memory low condition that can cause the iOS force quit your application. The iPad 2 is less susceptible because of the large amount of memory, but it always causes a decrease in performance and still can 'crash' app.

  Alex

• Previously, during display of the image (photo) in the tab, it displays the resolution of the image, how to recover the photos (pictures) display resolution?

  Previously, during display of the image (photo) in the tab, it displays the resolution of the image, how to recover the photos (pictures) display resolution?

  You bring up the title bar via the "Title bar" button at the bottom left in the palette to customize window

  • Firefox menu button > customize > title bar
  • https://support.Mozilla.org/KB/learn-more-about-the-design-of-new-Firefox

  

  See also:

  • https://support.Mozilla.org/KB/how-to-make-new-Firefox-look-like-old-Firefox
  • https://support.Mozilla.org/KB/common-questions-after-updating-to-new-Firefox

• Satellite M60-139: separate the button until the middle of the lid

  Forum-friends Hello and greetings from cologne/Germany,

  I hope that I can describe my problem good enough to find same assistance if my bad English ;-)

  Yesterday, I recognized a torus (in German, it is called "Riss") in the cover (in German, we say "Deckel") my laptop M60-139.
  This torus push from the opening button approx. 3cm in the middle of the lid. If needed I can send you a picture...

  So my question is:
  How to open the LCD screen and the lid to stick the torus of the Interior with a very strong 2-component-epoxy to prevent growth of torus?

  Concerning
  Friedel

  Ideas or manuals of disassembly on the photo to: [email protected]

  Hello guys

  I think it's a warranty issue and you should contact the partner of service authorized in your country. Please this as soon as possible. Addresses and phone numbers, which you will find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

  Good luck to you two!

• Portege Z30 - A - 18 M - cannot set the native resolution on the external display

  Hello

  I tried to connect two different displays full HD to my Portege Z30 - A - 18 M and I was unable to set the native resolution - maximum resolution I can put for those is 1680 x 1050... I was not so surprised by the first that I had a few problems with a native resolution when I connect to the laptop computer Satellite I had before. But then the same thing happened when I tried the other view.

  I thought that this notebook can handle a higher resolution external... Is there a way to force the native resolution of the external display in Windows 7?
  Thank you!

  Just a question: have you plugged your Portege with HDMI cable and use only the HDMI option?
  With other words went from the desktop to the external display only computer?

  I don't have this machine, but I think you should be able to see the desktop on an external device to the HD full 1920 x 1080 resolution.

• Changed resolution of the secondary display: cannot reset

  I use a second monitor on my Imac 27 "OS 10.11.3 and have never had a problem with the resolution on the second monitor connected with a VGA cable. Suddenly this morning on this screen resolution is 800 x 600. I can scale, move in 1280 x 1024, have held down the Option key to detect the resolution of more options (the monitor displays the suggested resolution is 1980 x 1080, but I can't find how to add this resolution who worked until today. Puzzled and frustrated.

  Hi we04ndy,

  I understand that you have a problem with the resolution of the screen. Let "see if we can get this sorted out.

  I don't know, after the second article, if you use an Apple Mini DisplayPort to VGA, you will get a 1920 x 1200 max resolution or 1600 x 1200 depending on the discount rate. I would look on the troubleshooting in the first article to review what to do if you get undesirable results with the resolution of your secondary display. I would start with the SMC reset and NVRAM for you get started.

  Get help with graphical problems on external displays connected to your Mac.
  https://support.Apple.com/en-us/HT201177

  Apple Mini DisplayPort adapters: frequently asked questions (FAQ)
  https://support.Apple.com/en-us/HT204149

  Nice day

• Re: Satellite A350D-114 - how to change the display resolution?

  Hello

  I have Toshiba Satellite A350d 114. The screen resolution is 1366 x 768.
  But I want to change for example 1280 x 1024, but I can't.
  I wish I had a longer high reolution (768 above).
  What should I do for this?

  Thanks for the replies.

  Piotr

  Vasja is right. You should offer more information.
  When you buy laptop and use it with the settings of the right display driver is pre-installed and the resolution of the screen on the right will be defined by default.

  So the question is: what you do or what you've done with your laptop? with the right display driver, you should be able to use the waterproof display resolution.

• Activation TV changes affect the Satellite A100-201 display resolution

  I have a Satellite A100-201 with graphics card intel 945 GM and whenever I have activate tv out (clone) the resolution on the laptop lcd is reduced. A box appears saying "If I do not answer within 15 seconds, then the setting will return", but it's not - the setting is applied without worrying.

  Change the setting back manually to the simple screen does not restore the previous screen resolution, I have to restore the system.

  Any ideas what's happening?

  I think that it s not a hardware problem, but only a bad setting in the properties of the graphics card.
  The properties of the graphics card and access the advanced option. On the general tab, you will find options for compatibility:
  You should choose the option: apply the new display settings without restarting

  In my opinion it should solve you problem ;)

  Hello my friend and report your results.

• Satellite P300 - display resolution incorrect if the external monitor is connected

  I wanted to use a monitor BENQ of WAP 2010 with my Satellite P300 laptop operating system is Windows Vista Home Premium 32-bit.

  When I connect it, the display resolution changes to an unusable.
  I installed the latest ATI drivers that I downloaded from the Toshiba site. Max screen resolution is 1680 x 1050. This resolution no longer exists after the connection of the monitor.

  Also, I can't set the correct resolution for the LCD display of the laptop more.

  How set up the screen, so that the monitor displays a clone of the LCD screen for laptop and find the correct resolution?

  Hello

  > Max monitor resolution is 1680 x 1050. This resolution no longer exists after the connection of the monitor.
  Please understand that not all possible solutions are supported by a graphics card chip or a graphics card driver.
  If one of the parts mentioned would not support this resolution then you will not be able to choose and use the external monitor!

  In your case, I recommend the manual of your laptop.
  There you can find a list of available external resolutions and supported.

  Welcome them
  Markus

• Update disk on the Satellite M60-139

  Hello Forum friends and once again greetings from Cologne/Germany.

  Can anyone tell me what size I can switch the disk hard 80 GB of my M60-139 origin? I think it would be nice to have more space but I have heard that not every hard drive works with this model and its BIOS?

  So did someone has changed the internal hard drive--that model, what size and what service... partition? Any manual how to change?

  Concerning
  Friedel

  Hello

  In my opinion, you can use the 100 GB HDD, maybe also a 120 GB but I m not 100% sure of this size of HARD drive.
  Try it simply.
  It is important that the HARD drive will support the enhanced IDE ATA-6 interface and the 5400 RPM disk rotation.

• The UHD 15 - ISK Y700 display resolution setting

  I find that if I leave the display in full UHD some programs can't handle very tiny (the text in full screen) even when windows adjust the scale of the reconmend 250%. What is eveyone else help the resolution of the screen?

  It seems set to 2048 x 1152 and 125% scaling, it works well

• Problems with the retina display resolution

  Hello

  I have a macbook pro (2015) with a retina display 15 "that I can't seem to adjust to the correct resolution. The native resolution, as I understand it, is supposed to be 2880 x 1800. I can't see my resolution when I put its "default value to display" in system preferences, but if I change it to "scaling", it is said that the default resolution "looks like 1440 x 900". Even when I go to the maximum the space option, it doesn't give me that 'looks at 1920 x 1200.

  When I up resolutions for the screens of the retina, it looks like the scale at 1440 x 900 option is supposed not to be available for the 13 "display.

  

  

  The native resolution is not supposed to be available in the options when the scale is selected. What you need is respectful of the eye from the App Store, which will increase the resolution above the option 'More space' completely in the native resolution.