Portege Z30 - A - 18 M - cannot set the native resolution on the external display

Similar Questions

• Satellite M50-130: no display after the passage of the external display in main monitor

  I have a very strange problem.
  My brother was on his user space as soon as possible and I managed to get the secondary monitor for main monitor and disable the screen of the laptop back, however, when it comes to me, it won't happen...

  Well, any help would be appreiciated.

  Hello

  Could you please be clearer? Is it possible to see something on the external monitor?
  Do you see something? What happens if you use the function FN + F5 device display?

  I put t know how you managed to set the external display as main screen because on my laptop, this option is grayed out.
  However, you should see the laptop if you will start Notepad in safe mode. Please check!

• Satellite M100: Cannot set the resolution 1368 x 768 on external LCD screen

  Satellite M100-179
  Graphics - ATI x 1400 card.
  Cannot set the resolution 1368 x 768 on connected usung Sub - D LCD TV Samsung 32R72
  There is no resolution 1368 x 768 in the available resolution list.

  The graphics card hardware support different screen resolutions, but if the driver doesn't contain this resolution of the screen so that you cannot choose it.
  I think so you re not able to choose this special resolution on the external display.

  In my opinion it has nothing to do with the graphics card or with the screen, but only with the graphics driver.

• Cannot set the time zone of Moscow winter + 3 hours.

  Cannot set the time zone of Moscow winter + 3 hours.
  Set the time zone Minsk 3 after the GPS clock moves forward 1 hour, timezone is set back from Moscow + 4.
  It is an error of your software when you are ready to address this issue.

  Automatic deactivation date & time(Settings>Date&Time...)

• Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."

  Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."  How can this be repaired?

  Hi rebick,.

  Try the troubleshooting steps presented by spirit X in this thread.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BIOS HP Compaq Elite (i5-2400 CPU) 8280 cannot set the VT option

  BIOS HP Compaq Elite (i5-2400 CPU) 8280 cannot set the VT option

  found in the security system] [, thanks]

• ERROR - 1051414 - cannot set the role of group with shared services [30:1101:JNDI error] error.

  Hi all

  I tried provide access to filter the group in both SSP and thru Maxl command but still get the error below. Any experience of this problem? If Yes, please let me know how you solved this problem.

  
  

  ERROR - 1051414 - cannot set the role of group with shared services [30:1101:JNDI error] error.

  
  

  Thanks in advance!

  Krishna

  Read the support document that I posted the link, prior to changes for openldap ensure you that it is saved.

• I'm doing slideshows to music with an opening, I would switch to LR, but you cannot set the duration of each slide (in my case the score) based on listening to the music. (In the opening by clicking on the "stopwatch" and pressing enter at each change of

  I'm doing slideshows to music with an opening, I would switch to LR, but you cannot set the duration of each slide (in my case the score) based on listening to the music. (In the opening by clicking on the "stopwatch" and pressing enter at each change of image). Adobe staff question: can I expect to find this option in a future release?

  Hi Pcaubi,

  There is no such updates for the same from now.

  I suggest you to please put in a feature request to: Photoshop community customer family

  Kind regards

  Tanuj

• Cannot set the configured property "/ Initial.initialServices".

  Hi all

  I'm getting following error.

  05:21:52, 006 INFO [STDOUT] cannot set the configured property "/ Initial.initialServices" atg.nucleus.ConfigurationException: could not resolve the component/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet

  05:21:52, 013 INFO [STDOUT] * error

  05:21:52, 064 INFO [STDOUT] cannot set the configured property "/ Initial.initialServices" atg.nucleus.ConfigurationException: could not resolve the component/com/progiweb/fbconnect/pipeline/FacebookProfileRequestServlet

  I checked the path of configuration of two components and the structure of the servlet is as below.

  src/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.java and src/com/progiweb/fbconnect/pipeline/FacebookProfileRequestServlet.java.java

  For properties files I created them under the path - config/atg/dynamo/servlet/dafpipeline / config/atg/dynamo/servlet/pipeline

  Inside of these I keep the files FacebookAuthStatusServlet.properties and FacebookProfileRequestServlet.properties
  

  The Initial.properties is as below - config/atg/dynamo/servlet/Initial.properties

  The content of Initial.properties is-

  & initialServices =.

  / ATG/Dynamo/servlet/dafpipeline/FacebookAuthStatusServlet,.

  / ATG/Dynamo/servlet/dafpipeline/FacebookProfileRequestServlet

  
  

  Should I have to keep the two pipelines-dafpipeline and pipeline or one of them?

  And my pipeline structure is correct or not?

  How to solve the error above?

  Please help on this!

  Kind regards

  Prateek

  You seem to be confusing core components and classes Java.  They are completely different.  The error message that you get "Unable to resolve component", says that the kernel is unable to find a file of specific properties anywhere in the directories named in your configpath trees.  To be precise, there is no file named /com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.properties in your config directory.  If I read correctly this conversation, it is because the file with this name is a .java file, not a .properties file.  The two most likely causes of your problem are:

  1. you have a file of properties somewhere that mentions/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet as the value of something else than $class.  $class is a special case whose value is sought by a Java ClassLoader in the classpath.  Values of the other properties are interpreted as references to the component, and looked up from core in the configpath.

  2. in the directory tree that contains the /com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.properties isn't in the configpath.  ATG displays the complete configpath during startup.  If your directory is missing, you have may have specified correct information in the entrance of the ATG-Config-path in your module MANIFEST. MF file.

• ORA-12054: cannot set the ON COMMIT...

  Hello
  can someone please tell me what am I missing here?
  I can't create a materialized view, but I can't understand why is this?
  

  SQL> select * from v$version;
  
  BANNER
  ----------------------------------------------------------------
  Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
  PL/SQL Release 9.2.0.7.0 - Production
  CORE    9.2.0.7.0       Production
  TNS for HPUX: Version 9.2.0.7.0 - Production
  NLSRTL Version 9.2.0.7.0 - Production
  
  
  SQL> r
    1* select master,primary_key from user_mview_logs where MASTER='CIS_CASE' or master='CCR_ACTION_DEF'
  
  MASTER                         PRI
  ------------------------------ ---
  CCR_ACTION_DEF                 NO
  CIS_CASE                       NO
  
  
  
  SQL> r
    1  SELECT a.table_name, a.constraint_name, a.constraint_type, b.column_name
    2    FROM user_constraints a, user_cons_columns b
    3   WHERE a.constraint_name = b.constraint_name
    4*    AND a.table_name IN ('CIS_CASE', 'CCR_ACTION_CASES')
  
  TABLE_NAME                     CONSTRAINT_NAME                C COLUMN_NAME
  ------------------------------ ------------------------------ - ----------------
  CCR_ACTION_CASES               ID_PK                          P ID
  CIS_CASE                       PK_CIS_CASE                    P ID
  CIS_CASE                       SYS_C008496                    C ID
  
  
  
  SQL> CREATE MATERIALIZED VIEW mv
    2    REFRESH FAST ON COMMIT
    3  AS
    4  SELECT c.ID,
    5         CASE
    6            WHEN (c.script_id IS NULL OR c.queue_id IS NULL)
    7               THEN 1
    8            WHEN c.script_id IS NOT NULL AND c.queue_id IS NOT NULL
    9               THEN 2
   10         END TYPE,
   11         c.datum + a.due_time / 24 - a.alarm_due_time_1 / 24 alarm1,
   12         c.datum + a.due_time / 24 - a.alarm_due_time_2 / 24 alarm2,
   13         c.datum + a.due_time / 24 due_date
   14    FROM ccr_action_def a, cis_case c                                  --users u
   15   WHERE NVL (a.queue_id, NVL (c.queue_id, 0)) = NVL (c.queue_id, 0)
   16     AND NVL (a.type_id, NVL (c.case_code_type_id, 0)) =
   17                                                    NVL (c.case_code_type_id, 0)
   18     AND NVL (a.code_id,
   19              NVL (NVL (NVL (c.code_id_4, code_id_3), code_id_2), code_id_1)
   20             ) = NVL (NVL (NVL (c.code_id_4, code_id_3), code_id_2), code_id_1)
   21     AND (c.datum + a.due_time / 24 < SYSDATE)
   22     AND state IN (1, 2)
   23  UNION
   24  SELECT c.ID, 3 TYPE, a.due_date - a.alarm_due_time_1 / 24 alarm1,
   25         a.due_date - a.alarm_due_time_2 / 24 alarm2, a.due_date
   26    FROM ccr_action_cases a, cis_case c
   27   WHERE c.ID = a.cis_case_id
   28     AND (a.due_date < SYSDATE)
   29     AND state IN (1, 2);
    FROM ccr_action_cases a, cis_case c
         *
  ERROR at line 26:
  ORA-12054: cannot set the ON COMMIT refresh attribute for the materialized view

  Vili Dialis wrote:
  Rob, if you have any comments on my last query operation, I would be greatfull.

  Vili,

  You must start with a join view which does not contain any aggregate. Just a join of the ccr_action_def and cis_case. And don't forget to include the two table rowid to make quickly updatable. Then create a full blown newspaper on top of the join mv materialized view and create mv aggregation, selecting in the mv to join.

  Kind regards
  Rob.

  Published by: Rob van Wijk on 14-dec-2009 12:09

  And two boards that are not linked mv:

  (1) as has said, use a.id and c.id in a group by clause for the query itself work
  (2) do not use the string ' 14.12.09", use a date but you compare it with a date. So use: date "2009-12-14'

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Tecra S2 cannot switch to the external display

  With my Tecra S2 and when it is docked in the Port Replicator APR - III, I used to be able to connect my external (via DVI) display so that it was to automatically screen output to we by default, not only to the windows startup screen (Yes, I noticed the topic on the forum at the start of windows) but also when display login screen and beyond.

  Only problem now is that there is no more than anything, she now only sends the output to the external display when starting and then switches back to the computer screen displaying the screen Windows login and when you are connected to Windows.
  Also after commissioning and connection, FN + F5 does not at all, even when you switch to DVI, display does not illuminate.

  I feel that either the nVidia properties settings (double screen, unique, etc.) or the Mobile Extension Manager have something to do with it.
  Anyone who knows the answer / solution to this problem?
  Experts on the Mobile Extension Manager or several monitor in nVidia settings with of Toshiba Tecra?

  Thank you

  Arjen

  Hello

  Well, as I know it is not possible to set the external monitor as a default monitor.
  I use a Satellite phone and sometimes I plug it into the external monitor and use the extended desktop option.
  During notebook startup procedure the windows boot image will appear on the second screen, but the user name and the operating system appears on the screen of the laptop.
  I think you can use the external monitor but you can't set it as a default monitor and you can use it if the operating system has been released.

• Cannot reconnect the external hard drive

  Cannot reconnect the external hard drive after moving the computer. I have a WD external hard drive and after moving computer cant use. It is used to mount drive f and now in the g drive. He keeps asking me to format the disk before it can be used, but cannot do so. I am desperate to back up my files but can; "t.Any help would be much appreciated

  Hello meatindustries,

  What operating system do we use?

  The answer to this question, we can pursue various troubleshooting methods.

  There are many third-party data recovery utilities available for free online.  You can search for these using your favorite search engine to find one that you like.

  Let us know the operating system you are using and we can go forward from there.

  Best regards

  Matthew_Ha

• Portege R700 with docking station may not automatically switch to the external display

  Hello!

  In the past, we bought a lot of A600, R500, S10, and always a docking station for every laptop here at Desjardins, we bought.

  Now we have a little problem with the new R700 model: PT318C - 00G 001,
  We bought 30 of them.

  WHY when we put in the tie-down (with the nearby screen) it can display automatically to the external display no/switch? (in this case a 22inc LCD)
  It is connect with the HDMI/DVI cable. And when we get the display by sliding in the graph of intel and media panel (V 6.14.10.5258), after a reboot of the docking, the screen is all buzzy... sometimes both screen are dark, and we must use a combination of keys to move.
  It's really not easy to use for our users...

  With the old model as the A600 or S10, all have always worked well, if we are on the dock, the pop screen directly on the external LCD, so I stopped him, ondock it and start up of all is well on the screen of the laptop.

  We are on Windows XP Pro SP3.

  I tried the utility Toshiba display device change and expansion Mobile from Toshiba. are not clear...

  Thanks for your help.

  Have you installed a version of vanilla from Windows? Or XP has been installed from the Toshiba Recovery Disc?
  Maybe you are missing several key structural factors (common modules for example). Also make sure that you use the drivers to display on the Toshiba site.

  Also try a BIOS update (v1.70 is the last one I think).

• Switching the external display to MBP screen retina, poor quality, need to restart FF19.0.2

  Here is the chronology of the events:

  (1) FF start on my MBP (OS 10.8.2) and the retina display working properly.

  (2) connect my MBP to a 24 "external display which has a resolution of 1920 x 1200 (defined as primary) max. FF displays well on screen.

  (3) disconnect the external display and FF is now pixel on retina MBP. Updating of system preferences Dispay doesn't seem to help, or I have not found the magic technique.

  (4) restart FF and everything is fine.

  The question seems so FF not to recognize the need to revisit the resolution of the retina.

  You are welcome