Display text messages in a pop-up window.

Similar Questions

• Messages from a pop up window

  I use PopUpManager to launch a pop-up window (in the Air). But shipped from the pop-up messages seem to be disappearing into the ether. I tried childlist is of APPLICATION setting, but the application does not seem to receive all messages from the pop-up window. Any suggestion would be appreciated!

  Thank you.

  If this post has answered your question or helped, please mark it as such.

  SystemManager, popup windows here in their own display list. Add the event listener to systemManager, as in my post from Flex 3 cookbook.

  en_US http://www.adobe.com/cfusion/CommunityEngine/index.cfm?Event=ShowDetails&postid=15466&Loc= & productid = 2

• How to enter the text message written in a popup window?

  Hello
  I tried the functional test of web application using OATS? I have to use the SMS (for comparison with text) written in a Popup. So can someone tell me how to enter and the message of written text in a popup window?

  String test_1 = web.element (35, ' / web: window [@index = '1' or @title = 'SOME TEXT']/web:document[@index='1' and @name = 'frame_OAT1'] / web: div [@texte = "domain errors exist." ") ') .getAttribute ("text");

  The problem with the above line is that Openscript will look for a div with text 'errors in domain exist.' element and if it locates it then she returns the value attribute of text which is "domain errors exist." This exercise don't purge not any purpose.

  If you want to know any text that comes in this div, you must get the index and print this text in this index.

  In case you just want to check, you can use exists() which gives a Boolean result directly. Like this

  Boolean IsExists = web.exists ("/ web: window [@index = '1' or @title = 'SOME TEXT']/web:document[@index='1' and @name = 'frame_OAT1'] / web: div [@texte = 'errors in domain exist.']", 1);

  The official guide are in the downloads page.
  http://www.Oracle.com/technetwork/OEM/downloads/index-084446.html
  Download the item named "Oracle Application Testing Suite 9.2.1 - Documentation" on this page.

  In addition, you said just by writing @index you were unable to retrieve the value. Make sure that the index of the div does not change each time. If it evolves so it is more difficult and it is a whole new discussion.

  Just index values get incremented. For example, if your window generates a pop-up window, your main window has an index of 0, your popup has an index of 1.

  Tell me how it goes.

  Kind regards
  Narayan

• Display - text is too light HPE 440f Windows 7-64

  Text is too light HPE 440f Windows 7-64 HP 2310 LCD Monitor wide

  My normal text appears in blue, which is very difficult to read.  When I change to black, most of the graphs are not displayed.

  Hello

  Does the problem occur with just one application or all applications?

  Try the monitor and cable on another PC to remove these components as possible problems. Try a reset of the monitor. Unplug the power cord from the monitor and hold the power button of the monitor for 30 to 60 seconds. Plug the monitor back in and it lights up.

  You use a discrete video card.

• BlackBerry Smartphones display text messages in the message box

  I just got my Blackberry Curve yesterday and I'm stuck. I figured out how to separate my emails to my text messages in the 'Messages' box, but it is always default to my email messages when I opened the box "Messages". How can I make the text message folder? (There is no "hide folder" option I can find it, and when I separated from email and texts no new record did come on my homescreen).

  Thank you!

  If you have changed "SMS and Email" to separate boxes? On my machine, I had to look in my Applications folder to find the icon 'SMS and MMS '. After that I found it, I was able to move on the home screen.

• Display data in the graphics pop-up window

  I'm trying to display continuous data in a graphic pop up. When I press a graphic button should pop up and show all the previous values as well as those generated at all times. If possible, I want to do this without the use of global or local variables. This question was asked before too http://forums.ni.com/ni/board/message?board.id=170&message.id=315949&query.id=9049787#M315949 , but I was unable to understand the proposed solution. I am a civil engineer, means that it will be difficult for me to understand advanced concepts and sometimes even simple concepts related to computer programming.  I have attached two screws just to illustrate what I'm doing.

  Thank you

  A few tips:

  • The Subvi should be placed in the case of timeout since it is the only place where it is to be used.
  • You have no need to convert a DBL to subtract the timestamps. Works of operation subtraction with timestamps (it is polymorphic) and give you a DBL. This allows you to eliminate a certain number of operations.
  • In the Subvi, rather than using a property node to hide the control (which is executed whenever you call the VI), simply hide the control by double-clicking on the terminal on the block diagram and selecting "Hide control". You can also set the 'Visible' property by right-clicking on the control, and then select Properties. Or, you can simply resize the Subvi front panel so that the control is disabled on the side.
  • The tunnels off events are initially set to 'Use default if Unwired'. A Boolean value, that would be wrong. So, just to have the Stop_Program case were in fact a real constant wired to the tunnel. All others can be disconnected to the left. The "use default if Unwired" is something to both good and bad. On the one hand, it can identify missing wiring if you leave this off, so you can catch situations where you do not generate data in a briefcase when you should. In this case, however, it is perfectly safe.

• BlackBerry Z10 Z10 will not display text messages, cannot receive

  I did a cleanup of security yesterday because my contacts were a complete mess, numbers have been associated with incorrectly, and I have no idea how this happened.

  After the security wipe, and when I highlight, and then click SMS, the hub of Blackberry only displays the telephone numbers of the numbers that I sent a text when I click on the message, I see the number plus a gray screen.

  No need to do a security wipe because it only deletes all data from the phone and put it in a 'default' State You should try to do a reload of the operating system using the BB link. If you don't want to lose your contacts or settings. Make a backup of everything before reloading. The instructions are as follows:

  Open the BlackBerry link and connect your device via microUSB
  Select settings (gear icon)
  Select reload under Reload Device Software
  Follow the on-screen instructions to reload the software. When you are finished, you can disconnect your device.

• XP displays GRUB message could not connect to windows

  My system as 2 hard drives, an 80 gb (works with XP) and a 40 gb (works with Fedora software VM ware), Fedora worked for a day, now when I boot I get message GRUB and I am not able to connect to Windows?

  Hello

  I suggest you to send your request below link to improve the assistance:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• Display a message after validation

  ADF 11g Adf BC
  
  Hello
  
  I use a train of workflow to allow the user to enter data.
  The task is displayed in a modal window.
  
  At the end, I want to validate the data, display a message like "your data has been created", and then close the dialog window.
  
  To close the window, I use a return of the activity in the workflow.
  I put the message in a pop-up window.
  I have created an ActionListener method in a bean that is committed and then displays the context menu.
  
  Validation works like the context menu.
  The problem I have is that if there is an error during validation, I want to display the context menu.
  What happens now when there is an error that I get the window/popup with error and my window messages, the error message window starts in gray
  
  What is the best way to display a confirmation message after a commit?
  
  Concerning
  Paul

  How are you performing validation, if he uses the operationBinding then operationBindings.getErrors () can give you the errors occurred on the execution of validation

  Example code:

  BindingContainer links = getBindings();
  OperationBinding operationBinding = bindings.getOperationBinding ("Commit");
  Object result = operationBinding.execute ();
  If (! operationBinding.getErrors () .isEmpty ()) {}
  make the invisible popup
  }

  Jean Lou

• receive pop-up windows constantly Progra ~ 2\WIFOE7 ~ 1\DATAMNGR\64\IEBHO. DLL

  Original title: error message

  receive pop-up windows constantly Progra ~ 2\WIFOE7 ~ 1\DATAMNGR\64\IEBHO. THE DLL HELP

  Hello

  1 does happen on any particular application?

  2. What is the brand and model of the computer?

  3 did you changes to the computer before the show?

  Method 1: Put the computer to boot and see if that helps.

  A clean boot to test if any element of service or third party application startup is causing this issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: when you're done to diagnose, follow step 7 article to start on normal startup.

  Method 2: SFC scanner.

  Analysis (sfc) System File Checker will replace the missing or corrupted system files on your computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  Method 3:

  I suggest you make a system full scan just to be sure.

  Here is a link that will give you information on how to perform a full scan of the system:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  , Note 1: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note 2: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• DROID: Is there a way to fix 'sounds' in the text message?

  Just get used to my new phone and I have not found a way to include sounds with a text message. Second, is there a way to display text messages in a "zone of Envoy" or "inbox" only? Any advice would be helpful.

  YES! I got too ill attach a sound file to my text and I found a way to do it. If go you to the 'market' and download 'Handcent SMS', it's a free app, you can use it for all your text messages and when you select "join" it offers you the opportunity to join one of your audio files.

• Display the message after you click OK in the pop-up window

  Y at - it is possible to display a Message after close Popup.

  For ex:

  < af:popup id = "employee" contentDelivery = "lazyUncached".

  popupFetchListener = ' #{employee.» Create_employee}.

  popupCanceledListener = "#{employee.cancel}" >

  < af:dialog id = "d22" type = "okCancel" title = "create an employee."

  resize = "on" dialogListener = "#{employee.editPopup} '"

  cancelTextAndAccessKey = "Cancel".

  affirmativeTextAndAccessKey = "OK" >

  After clicking Ok, I want to display a message: create used with success!

  Thank you

  In your listener dialog, make a call to this function. Or if you want to view pop-up, call popup programmatically.

  	{} public static void addFacesInformationMessage (String msg)
  	FacesContext ctx = getFacesContext();
  	FacesMessage fm =
  	new FacesMessage (FacesMessage.SEVERITY_INFO, msg, "");
  	ctx.addMessage (getRootViewComponentId (), fm);
  	}

• Some pop-up windows is displayed is not under IE

  Hi all
  I am a user of RoboInfo worm. 6 and I currently encounter some difficulties to get all popups of information to display. I use Robo to create a site with a manual of procedure for my Department and have a lot of screenshots for information purposes. We have recently (during the month of June) upgraded to XP Service Pack 2 and it seems that since then SOME pop-up windows does not display of all after clicking on the link. It seems that only the .htm files newer that I created have this problem and if I discover the .htm directly from the project folder files locally popups work fine. Also, popups display properly through the preview in Robo option. I guess that the problem must be with Internet Explorer. The error message states: "problems with this Web page might prevent it display properly...". "Under the details section it shows the line: 1348, Char: 2, error: access denied., Code: 0, URL:... Any info anyone can provide would be greatly appreciated.
  
  Thank you
  Gary

  Hello Gary.

  'I see,' said the blind man that he picked up his hammer and saw.

  Try this:
  (1) from the view of the project manager creates a new topic.
  (2) deletes all the text of the new section.
  (3) Insert your image in the section
  Amendment 4) to display the table of contents - DO NOT ADD THE NEW PAGE to THE table of contents
  (5) subject to 'parent' display, your table of contents, to create the link in
  (6) create your popup, either text or an image, by selecting and clicking Insert > Popup

  In the Popup window, go down to 'Select destination (file or URL)' and navigate to where you see the topic you created above.

  Click the topic in the list and see your preview image in the right pane.

  Select the desired Options in "hyperlink" (how/where to view it).

  Click the OK button.

  Save and build your project.

  Test project generated to see if the "popup" works now.

  Kind regards
  GEWB

• Text of the Firefox pop up Error Messages

  Ok... I am just learning Macromedia... and of course Diggin ' features to date. I have a links page where I want the text of the hyperlink is displayed in a new window to 800 x 600. So, I put javascript: in the Properties window and then call for the window pop up.
  
  Here's the page... http://www.mvchsreunion.com/links.html
  
  It works fine with IE but in Firefox, I get the error console? What gives?
  
  TIA!

  JavaScript:; (the colon semicolon)

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "tweaked_eye" wrote in message
  News:f8srov$3kd$1@forums. Macromedia.com...
  > Okay... I am just learning Macromedia... and of course Diggin ' features as well
  > until now.
  > I have a links page where I want the text of the hyperlink is displayed in a new
  > 800 x
  600 > window. So, I put javascript: in the Properties window, then call
  > for
  > the window pop up.
  >
  > Here is the page... http://www.mvchsreunion.com/links.html
  >
  > It works fine with IE but in Firefox, I get the error console?
  > What to do
  > gives?
  >
  > TIA!
  >

• Just recently, I receive the following error message when you try to access the web sites. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. There is a problem with some plugin?

  Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?

  It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 3.4.1.195. Go to http://siteadvisor.com and click on download. This will fix the problem.

  Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.