Display the text of fixed size

Similar Questions

• Computer will display the text but not the graphics

  I have a computer that is running Windows 7 Pro 64 bit that will display the text, but will not be graphic print (what I get is several pages of garbled text and what looks like Morse code).

  The problem is the same with a HP Officejet Pro 6230 or an Officejet Pro 8100.

  The problem occurs if I am connected with a domain users account or the local administrator account.

  The problem occurs using the re-discovery of HP network port monitor or the standard TCP/IP port.

  Two other computers connected to the printer and also running Windows 7 Pro 64 bit, you do not have the problem.

  HP printing and doctor Scan didn't find any problem and is not the problem of printer Microsoft Fixit fix anything.

  I will try to assign another driver by following the instructions at:

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers/how-to-assign-alternate-print-drivers-in-different-versions/TD-p/1957011

  but I do not know what driver to use.

  This Technet article:

  http://blogs.technet.com/b/perfguru/archive/2008/08/06/print-spooler-crash-troubleshooting-steps.aspx

  suggests that a third-party port monitor may be to blame. I tried to remove the rediscovery of HP Network Monitor, but I get an error and I can't remove it. As far as I can tell, this is the third port only installed on the computer monitor.

  I have searched this forum, but could not find a similar problem that has a solution.

  What other information should I provide?

  Thank you!

  Jeffrey Pike

  Groton public library

  ELSA:

  Further investigation of this issue today, I learned that probably, printing problems don't were not due to the computer or printer, but a bad pass that the computer is plugged into. I ordered a new switch, and I hope that it will be the end of my troubles. Thank you for the help that is available to you.

  Jeffrey Pike

  Groton public library

• Display the text in Hindi language

  Hello

  I need to display the text in Hindi language in Labview 8.2.1. Is it possible to do? If possible, help me to do.

  Thanks in advance.

  Kind regards

  Raja

  Hi Hillman,

  I followed the steps you mentioned, & also, I added a line UseUnicode = TRUE at the end of the configuration LabVIEW LabVIEW.ini file located in C:\Program NIUninstaller Instruments\LabVIEW.

  Then I read the hindi text from a file & I posted it in a string indicator. Also, right-click on the indicator chain & enable Force Unicode text. So that the texts do not display correctly as it is in the file.

  Thank you

  Raja

• collapse of icons always displays the text

  When illustrator upgrade 15.3, my icons is collapsed, I got on the right side have been developed to display the text. It seems that the panels collapse is just an icon no longer. How can I show just the icon?

  Try to grab the left side and drag it to the right.

  

• How to display the text "APPROVED" the report as a background

  Hello
  
  I want to display the text "APPROVED" on the purchase order report as a background text... How can I do this?
  
  
  Please help me...

  Hello

  As ayoub said, 'standard text' can be rotated.

  Another solution is to use an image instead of a standard text.
  ' Insert a picture in the "margins"

  concerning

• Empty paragraphs in a textflow cause error when displaying the text

  Hello
  
  When I create a textflow which has empty ParagraphElements elements in it (i.e. a ParagraphElement childless) I get this runtime error when I try to display the text in a container:
  : Error #2175: one or more elements of the content of the TextBlock object has a null ElementFormat.
  Is this a bug, or is there a reason legitimate for this error? If so, I would like to understand why. In my reasoning, a vacuum ParagraphElement should justifiably in the rendering of a line break. But maybe I think too much in terms HTML here...
  
  I appreciate any light you can throw on this point,
  
  Thanks in advance,
  
  Roland
  
  P.S. I'm using the latest version of 370

  This is a bug in build 370 been solved.

  A work around to a different build gets displayed is also adding a SpanElement to the ParagraphElement.

  Richard

• How to copy link to display the text in the Clipboard in the iphone?

  Situation: I get an email of delivery notification to an online store with the clickable link that displays the tracking number.

  Example: I see a link with the text "1zA56300" which is my tracking number.

  What I want to do is to select the text to display link, copy it and paste it into my shipment tracking application (I use the app delivery) to allow the application to track packages. However, my iPhone copy the URL instead of the tracking number.

  For example: copy the url http://shippingcompany.com/reallylonglink to the Clipboard. The request of delivery cannot analyze this link is useless to me.

  Is there a way to have the Apple mail for iOS copies the text that is displayed on the screen instead of the underlying URL?

  Hello AxeBox360,

  Thank you for using communities Support from Apple!

  Looks like you want to copy the text of a link rather than the link itself.  Be able to copy and paste what you need can save a lot of extra keys and helps to ensure accuracy.

  To copy the text, rather than the underlying connection, is to tap on the word before or after the link, select copy, and then move the selector so that it contains the text of the link.  This will then copy the text and not the underlying link and allows you to paste the text where you need.

  See you soon!

• Why is the text of different sizes?

  Hello

  The text with this browser shows different sizes of text on a web page? Some is normal, then some is tiny. I you pinch the page upward to read the small text, normal text is very large. It ruins the reading a web page. Why this happens, and can I do about it? It's especially hard when he's on a forum.

  Thank you.

  Hello
  This issue has been resolved, but have a lot of ideas suddenly something to help you

  • questions/930928
  • questions/961736

• How to set the font for this SuperNova will display the text properly

  I have a problem with the use of Firefox with Supernova. Supernova is a program for the Visual disabled allowing you to enlarge the office. When you visit the page

  http://www.raadvanstate.nl/Uitspraken/zoeken-in-Uitspraken/Tekst-uitspraak.html?ID=73735 & summary_only =

  you will see orange colored text in the main text block. It appears correctly. However when I enlarge the screen with Supernova this orange text is barely readable due to the fact that the letters seems constructed points instead of a smooth line.

  Note that this happens even with this page where I enter these details of the issues. Supernove enlarged rhe screen, texts outside of the text box are horrible while the text in this text box is good.

  I ask this question here because when I use Internet explore this problem does not occur.

  I tried to make a screenshot, but the screenshot feature only "sees" the screen is enlarged. So when I zoom to 100% with Supernova, the text in the screenshot seems to agree.

  I realize that this is a difficult question to reproduce, but any help is welcome. Note that it is not a real option for me to enlarge the font with the Firefox options. Supernova expands the full screen, not only the text on the Web page. In this way, I am also able to see the menu / bookmarks of Firefox itself.

  Thank you very much
  Hans

  You can use an extension to set a page zoom and the size of the default font on the web pages.

  • NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

• Displays the text of Cat Endangered in Landscape Mode

  I use a German HTC 7 Pro Windows Phone 7.10.8107.79 running and the text of conversations disappears completely when trying to enter text in Landscape Mode.

  This happens in the following circumstances:

  Click on a Skype contact

  Hold the phone sideways to switch to Mode landscape

  Slide the physical keyboard to enter text

  automatically any text of the conversation that happened so far will disappear, any new text added to the conversation by you or your conversation partner is not displayed either. The text in the chat box you enter gets displayed (up to it send it to you).

  The bug does not occur in the following circumstances:

  Click on a Skype contact

  Hold the phone sideways to switch to Mode landscape

  Do not drag on the physical keyboard, commit the software keyboard instead by clicking on the chat box

  Once the software keyboard gets displayed, drag the physical keyboard

  When this replica, the conversation always appears (as opposed to the "natural method" to simply drag the physical keyboard).

  Hello

  Unfortunately, this behavior can be changed for the moment. We are sorry for the inconvenience.

  -----
  If the answer was helpful please give Kudos and if the problem is solved mark with the solution for other users. Thank you!

• How use the serial port read and display the text but not scroll off the screen?

  I'm new-ish/return user fan of Labview and trying to change the example VI "Advanced serial write and read VI" is the part of the dev suite 2012.  I need to use the string box for ALL of the text from a serial port, always adding and just roll off the screen when the actuals come to the serial port.

  What actually arrived more than bytes (or no bytes AT ALL!), during reading time text, current rolls out of the box in the chain.  Even when receiving 0 bytes, screen is removed.  I'm not very familiar with the locations of functions and even worse to understand obscure references to functions, so please keep very basic answers so I can follow.

  Just to be clear, I need window of the chain behave as HyperTerminal does always displays the data and it is not pushed by window arbitrarily.

  Thank you

  Steve

  A long shot.

  Is that what you want?

• CustomBitmapField to display the text

  I want my custom BitmapField to display stationary text from the image and this is my code:

  package com.codemobiles.orientthai.field;
  
  import net.rim.device.api.system.Bitmap;
  import net.rim.device.api.ui.DrawStyle;
  import net.rim.device.api.ui.Font;
  import net.rim.device.api.ui.Graphics;
  import net.rim.device.api.ui.Ui;
  import net.rim.device.api.ui.component.BitmapField;
  
  public class CustomBitmapField extends BitmapField {
  
      public String aText = "";
      public Bitmap focusBitmap;
      public Bitmap unfocusBitmap;
      private boolean hasfocus;
      public Font FONT_PLAIN;
      public int m_MarginTop;
  
      protected void onFocus(int direction) {
          // TODO Auto-generated method stub
          hasfocus = true;
      }
  
      protected void onUnfocus() {
          // TODO Auto-generated method stub
          hasfocus = false;
      }
  
      public CustomBitmapField(String aText, Bitmap onfocusB, Bitmap unfocusB) {
  
          this.aText = aText;
          this.focusBitmap = onfocusB;
          this.unfocusBitmap = unfocusB;
          FONT_PLAIN = Font.getDefault().derive(Font.PLAIN, 5, Ui.UNITS_pt);
  
      }
  
      protected void layout(int width, int height) {
          // TODO Auto-generated method stub
          super.layout(width, height);
          setExtent(focusBitmap.getWidth(), focusBitmap.getHeight());
      }
  
      protected void paint(Graphics graphics) {
          // TODO Auto-generated method stub
          if (focusBitmap instanceof Bitmap) {
              m_MarginTop = (focusBitmap.getHeight() - FONT_PLAIN.getHeight() / 4);
              if (hasfocus == true) {
                  graphics.drawBitmap(0, 0, focusBitmap.getWidth(), focusBitmap.getHeight(), focusBitmap, 0, 0);
              } else {
                  graphics.drawBitmap(0, 0, unfocusBitmap.getWidth(), unfocusBitmap.getHeight(), unfocusBitmap, 0, 0);
  
              }
              graphics.drawText(aText, 0, m_MarginTop, DrawStyle.ELLIPSIS,
                      getWidth() - 15);
              invalidate();
          }
      }
  }
  

  I tried this code and it showing on the picture just of the screen.

  I did something wrong?

  Help, please

  Thank you

  Concerning

  It works now. I changed the drawtext to become this:

  graphics.drawText(aText, getWidth()/3, getHeight()/3, DrawStyle.ELLIPSIS,
                      focusBitmap.getWidth() );
  

  Hope it will help.

  Concerning

• I would like to resize the windows of fixed size...

  I feel almost ridiculous to have to ask this question, but after many (MANY) searches on the internet, I simply could not find a single effective fix.  Basically I want to somehow resize a window of fixed size (even through a registry hack).  More directly, I want to "expand" the columns resizable/visible so that I could FULLY discovered, for example, the paths of very long filenames, etc. - including the windows "System Configuration" window.  I'll do whatever it takes: registry hacks, utility installs... little matter.  It simply must be a solution to this age-old problem.  Thank you.

  Not sure, but maybe investigate http://download.cnet.com/Resize-Enable/3000-18487_4-75447319.html

  I never tried myself so can't tell how a good or bad, that is. And as always, AV check the download before install - just to play safe.

  Thanks for the quick return, George.  Unfortunately (and), I have downloaded and tested Resize-activate the same day I "gave up" and started this post.  It's funny, though, how the minds of Microsoft can't see the forest for the trees sometimes.  It is an age-old problem, and all simply be aware now.  Take care.

  Did you run the executable an administrator?

  I used ResizeEnable and you need to right click on the executable and select run as administrator.

  It works fine on Msconfig

• display the text in the navigation bar when the user connects

  Hi all

  I'm (still ) on Apex 4.2.6.

  Currently, I have in my page templates, the following code snippet:

        <div class="logoBar">
            <img src="#IMAGE_PREFIX#themes/theme_125/images/logo_.png" />
            <h1><a href="#HOME_LINK#" id="uLogo">#LOGO#</a></h1>
          <div class="userBlock">
            <span>Username: &APP_USER.</span>
            #NAVIGATION_BAR#
          </div>
        </div>
  

  I have an obligation to display the user name (APP_USER) and of the company the user works for point Application AI_COMPANY, only when the user is connected. When the user is not connected; instead of these elements, I must show a connection link. Well, I know how to display a link to the login page, only when the user is not authenticated, using the navigation bar. Currently, when a user is not authenticated; the page shows: username: person. It's because he's in my page template. How can I show only the user name when the user connects? And then only display the name of the company?

  My first thought was to add an item in the navigation bar. But these elements comes in the form of links. Is it possible to add a navigation bar element and let it display as text? Of course, I could write a dynamic action on page 0 to remove the link, but I'm looking for a nicer sollution or better.

  I have apreciate your help!

  I take it, you use the same model of your home page and login page.

  You could use 2 different models or get out your elements in your model and put them in page 0.

  You can then make them conditional based on the number of page

  Gus

• Display the text string on the Capture window

  Hello
  

  To capture is used difference two camcorders. What I have is a display of text pasted on the capture window. I do daily catches and what is new. Don't know how the text string is found on the capture window. Capture saves the film along with the display of text. I need to remove this information in order to have a full, clean with only the material captured.

  Attached a picture showing the information that needs to be removed.

  I use Adobe Creative Suite CS6 with Premiere Pro CS6 on a HP with Windows 7 pro 64-bit z800.

  Thank you!

  

  

  Well.

  I played on several bands and this one has its own text. It is burned in. This is most unexpected.

  Other assets play very well, as expected.

  Thanks for the idea!

  Now, I know.