Satellite A665-S5170 button support does not

Similar Questions

• Satellite A665 - 14G - FN key does not

  Hello

  I recently bought a Satellite A665 - 14G, everything worked fine.
  Then suddenly the day after the date of purchase, the keyboard was not turned on.
  So I pressed FN + Z combination keys, and nothing happened.

  I tried to press the other key FN combinations and none worked.
  So I'm assuming that the FN key no longer works.

  What could have caused this and how to restore its functionality?

  Hello

  Do the other FN + F keys work correctly?
  For example, FN + F6, FN + F7 and so on. ?

  If so, then the FN keys are OK and I don't think that lighting has been disabled.

  Usually in the BIOS, you can enable and disable the lighting.
  Check it!

  But if the other keys FN don t work, then you must reinstall the VAP (value added package) and Flash memory card Support utility.
  These two tools can be downloaded from the Toshiba driver page.

• Satellite S50T-A - button / stop does not

  Hello

  I am running Windows 8.1. After that most recent Windows Update and then restarted, the computer froze to the Toshiba start screen. Fan went into overdrive and so I pushed the power button / stop.

  Now, seems dead - button / stop, black screen, no its HARD drive is unresponsive. Only signs of life are power and battery LED on the front of the computer. Press and hold the power button for more than 10 seconds do nothing.

  Any ideas?

  Hello

  Stop switch force (hole) is available at the bottom of the laptop.
  In the case of PC freezes, do not start or a power failure, which can be fixed by pressing the power button for 10 seconds (force shutdown) and now, use the stop switch to force

  I found this info in this document of FAQ from Toshiba
  [The stop switch of strength (hole) for models with one main battery fixed | http://aps2.toshiba-tro.de/kb0/TSB3C03JR0000R01.htm]

  A short feedback would be greatly appreciated.

• Satellite C850 brightness button & volume does not + wifi problem

  Hi, I'm new here.

  I just want to know how to prevent this kind of problem on my satellite C850...

  Suddenly, when I open my laptop and desktop initialize the shortcut keys for the volume keys, and light is not working. My settings of brightness is low when this problem due do the brightness
  Now, I think that its in the middle of the brightness settings and I can not change it...

  and another problem: the network connection is not working.
  I can't connect to my Wifi, but my other devices can... and on the audio... they are all disabled... can not do something. but my solution to this is refreshing my laptop at the restored but point im doin it all the time tired when I met this problem coz I need a lot of software installed again...

  Please someone here already encountered this problem and have a solution with the exception of updating my laptop? :(

  Hi Symba,

  I m wondering how you use the function keys.
  As far as I know you can use the function keys in the traditional two keys FN key combinations, or you can press only F (F1 - F9).
  This option can be changed in the BIOS (-> Advanced tab of the system configuration) or in the HWSetup utility.

  To solve the problems of WiFi:
  I recommend you update the WLan driver first.
  Then, you can add a new WLan profile. This can be done in the Panel (switch to the display of the icon)-> Network & Sharing Center. On the left, you will see that the option called manage wireless networks. Until it clicks. Now, you could add and configure the new Wlan

  Regarding sound problems:
  Make sure that its not muted. Additional go to control panel-> sound and ensure that the speakers are turned on in the reading tab.

• Satellite A665-S5170 - if dim display goes to sleep or when I start

  Hi, whenever my satellite A665-S5170 goes to sleep or when I start it up to the top of my screen resolution is very low and the only thing that solves it is to recalibrate the screen in color management settings.

  Does anyone else have this problem?

  And you have this problem on the first day?
  Do you use pre-installed OS original you got with your laptop?

  You have changed some settings?
  I put t know how to figure this dim resolution, but have you noticed the behavior even if you use different power plans and set for laptop in standby mode?

• Satellite A200-1HV - sleep mode does not work

  Mobile coverage, close to the entrance in a sleep mode or a closing standby mode will be in condition is not clear: snap buttons it does not return to normal mode, toggle switch does not burn and portable starts is strongly heated.

  To force it to work, it is possible, only if to press power. But this work comes at the end not properly!
  As at the end of work with included food supplies specifications it is not turned off and reset product. Rearrangement Vista did not help.

  Please, say it's possible to do.

  I'm sorry for English.

  Hello

  sounds like a serious problem of material. I recommend that you send your machine to an authorized partner and leave check/repair your machine.

  Maybe some defective power supply on the motherboard.

  To find the authorized service partner nearest to your country please visit:

  http://EU.computers.Toshiba-Europe.com/

  go to support and downloads-> support home page-> of repairs maintenance &-> 'find an authorized service provider.

  Contact them and tell them the problem.

  Welcome them

• I need a driver/files mouhid.sys, my mouse support does not work. Please thank you!

  I need a driver/files mouhid.sys, my mouse support does not work.  Please thank you!

  Hmm, a strange thing to have disappeared.  Do you have a virus or checked for malware scanner?

  The mouhid.sys file is supposed to be in % systemroot%\system32\drivers.  You pouvez find a copy of it in % systemroot%\dllcache.  If it's not in... \drivers and is in... \dllcache, recopy the... \drivers.  (You may need to do this in Mode safe.)

  Except for the above bit of luck, there are several ways to recover.

  1. use msconfig:

  Get your installation CD or locate a copy online
  Since an administrator account, run msconfig ( -R, msconfig)
  When "msconfig" opens, select the "Général" tab and click on the button "expand file...". »
  (This will open the window to "Develop a Source of Installation file")

  Enter 'mouhid.sys' in "file to restore:
  Enter the path to the DRIVER. CAB file in the \i386 on your installation media directory.
  (or browse to...)
  Enter "c:\windows\system32\drivers" in the "save in:" entry.
  Click "expand".
  'mouhid.sys' is now where never told you develop to...

  2 use the utility auditor of system files (SFC) to check the missing files and restore them if necessary.
  You will again need your installation media and, if you have installed the Service Packs, the CD-ROM for
  the latest Service Pack, you have installed.

  From an administrator account, type: -R, sfc/scannow

  SFC calls for, first of all, your installation media, and then later the service pack CD-ROM.  If SFC wants to replace the files, leave.  If the SFC rejects your Service Pack CD-ROM, read the KB900910 Microsoft Knowledge base article.  Note that this article applies to SP2, but is also applicable to the SP3.  Just use your common sense and use SP3 where the article refers to SP2.

  If you don't have a CD-ROM Service Pack 3, or order it (U.S. / Canada , Europe, Africa , Asia or South America ) from Microsoft or download the ISO (here ) and burn it.  Be sure to Select the appropriate language if you download ISO.  Note, I recommend that you install Service Pack 3 on a CD-ROM, rather than through Windows Update so that youpouvez use SFC with success!

  Please, vote if it is useful!  Please, click on Mark as answer if that answers your question.

• button / (divide), does not

  button / (divide), does not work in the formula (instead of printing +), what to do?

  Look VERY carefully at what you see as + the divide symbol appears as a Chief and a threshold which, for some people, looks like a +. If you don't see the symbol try enter the formula and see if it DOES not give you the correct result.

• Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Ask an authorized service provider regarding iPhones, a guarantee of a country may or may not be honored in another function where you take the device.

  (143868)

• Satellite L650 - 12N USB Ports does not work

  My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
  It shows a yellow exclamation mark on my system.

  I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
  Under the key USB gives error code 43, I do not understand.

  The webcam and the wireless card no more.
  This boot problem after a storm in my area some time ago.

  Please can someone help.
  Thank you
  Sani

  Hello

  > This problem start after a storm in my area some time ago.

  Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

  I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

  But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

• Satellite L450D-11V - power indicator does not

  I just bought my L450D-11V a week ago. I noticed today that power led (indicator on the power button / stop) does not respont or act even when I put a computer to sleep. According to the manual, it should blink orange and white in other conditions. I don't know why its not just do not at all. The battery seems fine and is in charge.

  Somone would please shed some light on this problem because otherwise I will have to replace as soon as possible.

  Kind regards

  Hi kkuk,.

  What this means you only have problems with the status LED s and everything else works correctly?

  Are you sure that this laptop is in sleep mode

• Help and support does not work.

  Original title:

  win xp my help and support does not work

  Windows Help and support will not work

  Hello

  1. what exactly happens when you try to open help and support? You receive an error message?
  2. what service pack is installed in the computer?
  3 did you changes to the computer before the show?
  To resolve this issue, start the Help and Support Center service and set it to automatic. Follow these steps:

  (a) click Start, run and type Services.msc.

  (b) double click on Help and Support

  (c) to set the startup type on automatic.

  (d) to Start the Service.

  See also:

  Menu help and bootable media will not open

  http://support.Microsoft.com/kb/555329

  Registry warning:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  Let us know if it helps!

• HELP & SUPPORT DOES NOT OPEN

  Help & Support does not open. I have the msg "...". a service system does not work. To resolve this problem, start the service named 'help and Support '.

  I can NOT open help and support in order to start the service.
  Can you please help?
  Thank you
  John

  Hello

  ·         Were there recent changes made on the computer before the show?

  To resolve this issue, start the Help and Support Center service and set it to automatic. Follow these steps:

  (a) click Start, run and type Services.msc

  (b) double click on help and Support

  (c) to set the startup type to Automatic

  (d) start the Service

  See also:

  Menu help and bootable media will not open

  http://support.Microsoft.com/kb/555329

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

• Why does dell support does not, keep popping up

  Why does dell support does not, keep popping up

  Hello

  you will have to ask Dell Suport this question, because it is their software that you have problems with

  Dell suport

  http://support.Dell.com/

  or ask in the Forums of Dell Support

  http://en.community.Dell.com/support-forums/default.aspx

• HP-Pavilion g6 Mute button LED does not

  I have a HP Pavilion laptop g6 and I recently discovered that the LED on the button mute does not work, but the key works fine

  Help, please!

  Thanks in advance

  Hello all I had the same problem what I did was just go to (System) then (Device Manager) and then (audio, video and game controllers).
  Under there you will find a right click (IDT High Definition Audio CODEC) top and choose Update driver software and select (find the automatically...) MAKE SURE YOU HAVE INTERNET CONNECTION.

  This did the job for me, hope it does the same for you.