DisplayPort to DVI DualLink - it works on the w530?

Similar Questions

• DisplayPort to DVI adapter is generic Non - PNP monitor

  I have a 6 week old want H8 - 1420 T C1U69AV #ABA, Windows 8 64 bit, 1 GB Radeon HD7670 and I am trying to connect two Dell 1905FP monitors. Each monitor works fine when it is connected to the DVI port. When I connect a monitor with an adapter HP DisplayPort / DVI dongle, the system reports it as a generic Non - PNP monitor and the screen remains black. I tried the adapter on another system, and it works fine.

  I've updated to the new '8.982.10.1800 Rev A January 3, 2013' driver on the HP site, but it did not help. The AMD drivers will not install because it is apparently a video of the ugly step-child card, not a true AMD. If I knew that I would have not purchased with the system.

  I have the original of the 1905FP CD when I bought it and it isn't a driver file on this subject (no need of one with XP). When the monitors work, they are each reported as a 1905FP.

  Someone at - it suggestions?

  Thanks for the suggestion, but this has been resolved over the weekend. I was using a passive adapter Displayport to DVI. I replaced it with a Startech DP2DVIS active adapter Displayport to DVI and that did the trick.

• DisplayPort to DVI - D X 201 Tablet/Windows 8 64-bit - external monitor has not detected

  Hello

  Until a few days ago, I ran the evaluation of Windows 8 with little fuz copy on my X 201 Tablet with the X 200 ban.

  I have a DELL 3007WFP with DVI - D only.

  I connect it to the X 200 ban using an active Displayport to DVI - D adapter of BizLink and such that mentioned, it has worked very well.

  The I ran a fresh install of Windows 7 Pro 64 bit and upgraded to Windows 8.

  Before that, I updated the BIOS to 1.4.0 (who said that Lenovo is ready for Windows 8)

  Now I get "Another deisplay not detected" when I go to the configuration of the resolution of screens.

  I've tried hundreds of different approaches (new drivers, old drivers, windows 7 drivers, drivers own intels)

  Any suggestions?

  Thank you

  For some reason any magic, the monitor is broken on today.

  I have absolutely no explanation as to why!

  What I've done since my post? :

  I went into a store and my X 201 to X 200 ban.

  At the store they have enough to unpack a DP to DVI adabter and test if my setup would work with another adabter, and he did it right away.

  Accordingly, I have concluded that my own adabter was broken. (I even ordered a new).

  Adabter at the store was an edition of small budget that would not allow me to hit the resolution 2560 x 1600, if necessary.

  I bought a DP to HDMI adabter, I tested as soon as I got home. The HDMI worked perfectly immediately (also low resolution @1920 x 1080)

  Today, I took off and entered into tablet mode, for some off GPS test. When I got home, I return the screen back to normal and placed the 201 X in the dock, and it was there, WFP 3007 DELL illuminated like a Christmas tree

  Go figure...

  BTW. I also installed the drivers for my Epson WF-7525 today.

  I tried the last combination of connection/disconnection/drivers etc with no luck, then today out of the blue - it works.

• No signal found by HDMI or DVI monitor. Monitor detects the VGA signal very well.

  That is the problem. I used to get a signal from the HDMI cable or the cable DVi on my old monitor.  Then, the signal was there sometimes, and then it isn't.  Now my new monitor does not have an HDMI or DVI signal.  He finds the signal to the VGA and that works.  Any ideas?  Myself and a few others have no idea on how to solve this problem >

  Hello, billiardsnut

  You use a DVI or HDMI adapter?

  Assuming you are using a straight DVI-> DVI or HDMI-> HDMI Cable, try to turn off the computer and turn off the monitor, connect the DV or HDMI, then turn them both.

  Some video cards will not dynamically change on its own, following the steps above will generally establish the proper output.

  In addition, since you mention on your old monitor that it is intermittent, it might be that the digital (DVI/HDMI) port on your graphics card is a failure.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dell XPS 12 Mini DisplayPort seems to have stopped working

  Hello

  My Mini DisplayPort seems to have stopped working. I can connect on the same monitor of the ultrabook even through the USB port. However, because I'm a geek of database I need up to 3 screens. So when I try and connect to my Mini DisplayPort monitor the screen resolution tab in the Control Panel recognizes the display. However, the actual display is empty. Mini DisplayPort has worked well for the last 8 months or so, but stopped working tonight.

  The external monitor is; -Samsung; SyncMaster 941BW/940BW\199BW, SyncMaster Magic CX915BW (Digital)

  Any help would be greatly appreciated.

  Kind regards

  Kieran.

  I replaced the cable and now it seems to work.

  Thank you

  Kieran.

• U2312HM: DisplayPort and DVI port

  My U2312HM monitor has a display port and my motherboard supports DisplayPort as well.

  There are advantages of using DisplayPort to DVI?

  Innogen,

  They both will make the resolution of 1920 x 1080. DP transmits audio also if the video card supports.

• bought iphone7 pluse Qatar facetime doesn't work for the sim card of the India

  Hello Sir,

  I bought iphone7 pluse in qatar that the facetime doesn't work for the sim card of the India. and also before 2 years I bought the iphone 6, as well as in the same countries qatar, but that works perfectly and facetime works for me. the difference what I unbox my 6plus in indai, I unbox my 7plus in qatar and I put the sim card of sri lanka first and tried to India sim then and facetime disappear from the home screen. at the point where I insert my card sim of qatar is worrking. Please I need help. If I buy another piece of 7plus and bring it in sri lanka or India my facetime work? or what? I'm totally confused plese answer me as fast as you can

  FaceTime is forbidden by the law in Saudi Arabia and the UNITED Arab Emirates and is removed from iPhones sold in other countries of the Middle East, if they are used outside the country where they were originally sold. If you plan to use an iPhone outside the Middle East, then don't buy it in the Middle East. The one you bought there FaceTime was illegally imported from another region and sold it.

• I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  Hi yjain51,

  I understand you had some problems recently with getting Touch ID to work reliably on your iPhone 5s. I know that it is a feature of great security for your iPhone, so I'm happy to help you.

  When you use Touch ID, make sure that your hands are free of any dirt or moisture so that fingerprints can be read clearly. This article explains further:

  Use the ID Touch on iPhone and iPad - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• AirPlay does not work on Apple TV with ios 10.  It was working before the update.  Please notify.

  AirPlay does not work on Apple TV with ios 10.  It was working before the update.  Please notify.

  Try these steps, check to see if things work after each step if necessary, before you try the next.

  1. Check AirPlay is on the Apple TV (turn market if it already is)
  2. Check that both devices are on the same network (settings > Wifi on the mobile device and the settings > general > network, on the Apple TV).
  3. Restart the Apple TV (settings > general > restart).
  4. Restart the Apple TV by removing ALL cables for 30 seconds.
  5. Restart your router. (Also try to remove the power cord for at least 30 seconds)
  6. Restart your computer or mobile device.

  If you're still having problems, try to use 802.11n for wifi if you currently use 802. 11B or 802. 11 g.

  If your problem is AirPlaying starting a computer, try turning off bluetooth

  If you're still having problems, the following article can help you.

  Troubleshooting AirPlay

  Troubleshooting connections and Wi - Fi networks

  Recommended Wi - Fi settings

  WiFi Diagnostic Software (for Mac users)

  You will also find help on this page, where I have collected some of the more unusual solutions for network problems.

• Screenshots do not work after the IOS10.

  Screenshots do not work after the IOS10. I've tried several apps and the iPhone and iPad.

  Help please.

  < re-titled by host >

  You hold down the sleep/wake button first, the fast, click the Home button?

  Have you tried a hard reset of your iPad by pressing the sleep/wake and Home buttons simultaneously until your iPad goes to black and restarts with the Apple logo and then release the buttons?

  Good luck!

• Canon MG7520 no work since the upgrade of the Sierra.

  MacBook Pro communicates only with the Canon MG7520. Tried to reconnect with USB to the printer, no joy.  Called Canon they are aware of the problems of the Sierra.  Someone at - it find a workaround until this Canon & Apple get together.  If you have a printer Canon DONOT upgrade until you hear the problem is solved.  How hard AND risky is to return to El Capitan via Time Machine.  I backed up BEFORE upgrading.  I've never done before.

  Thank you

  This can help, I have the MG7150 printer/Scanner and the only problem currently is that on some impressions, I get "has no filter' showing in the print queue and the photo prints never. Appears the Canon USA are aware of the issues for the drivers there and that they are working with Apple for a fix as soon as possible (nothing yet on the UK site, however) but for the foregoing, they offer a work around the State.

  https://www.USA.Canon.com/Internet/portal/us/home/support/self-help-center/Mac-O SX-compatibility.

  https://support.USA.Canon.com/kb/index?page=content & ID = ART166610

  I realize this does not help but if my printer seems to communicate ok otherwise, your question is perhaps up to a form of bribery.

  Have you tried to remove and then reinstall your printer via "Printers and Scanners" in System Preferences, if you right click on your printer (printers head to the left) and select "Reset printing system" this will delete your printing system, so you can then add your printer by clicking the "+" button down to the left. When the box opens 'Add' wait a few seconds so that all the drivers installed (apples and the factory if you have installed separately) appear - then simply select you need. In my case, I have two "Canon MG7100 series" to choose, the first is 'Hello' and the second 'Canon IJ Network' - see what is displayed for you and all try them, you can work and go you again.

  Finally, if you select the Hello option you can change what is offered as part of 'Use' of its default value (could be AirPrint) to another, in my case "Canon Mg7100 series.

• Download 12.5.1.21 and lots of photos of work in the tabs of the ARTIST do not show the artist, only a graphic of a microphone. I had before the artist with their photos, and now I can't. How can we get them. ?

  Before when I have to click on the 'artists', all my artist art 12.5.1 on the sidebar appears. Now most of the artists album covers appear only a chart from a microphone in light pink, blue and clear.  However, when I click on 'albums', all album covers are not displayed correctly.  Review of my library, all the artwork for each song, and the album is installed correctly.   How to get the picture of the work on the 'artists' on the sidebar tab?  How can I do to reinstall the work of artists.  Help!

  Richard

  Yours is probably the clearest explanation of the issue of iTunes with the "artists". Could you put a picture of the "artist's impression" so that we can see the problem?

  (I guess that other "views" - recently added, Albums, songs and Genres - work very well.

  Thank you!

• USB formatted on the windows computer and then loaded with the IOS El Capitan files does not work on the Windows computer

  I tried to format a usb drive on my iMac home for use on a Windows computer. I tried to format it on the iMac with El Capitan and format on the Windows computer, but with the same question.  The files are corrupted and do not function correctly on the Windows computer at work.  The files are a combination of audio files and writing.  Is there a way to overcome this problem.  When I used earlier versions of IOS are not usability issues.

  iOS is for iPhones and iPads, but you also state El Capitan, so I guess that's what you're talking about.

  There are a lot of audio formats, many writing programs, so it is quite difficult to determine if this is a problem of format of file or a problem of disc format.

  Even if it's an mp3 player, wmv or any other file extension, there are more for the 'format' of an audio file of the extension.

  These designations are just wrappers that contain audio information. Audio information can be encoded in a variety of different formats and still be an mp3 or wmv. An mp3 player that plays on Windows cannot play on a Mac due to using a codec that is not installed on the Mac. Apple recently purged the operating system of older, obsolete codecs. As a general rule, VideoLan VLC can play most audio and video files on Mac and Windows.

  Were what type of writing files? Word, Pages, TextEdit,...?

• My iPhone purchased USA will work in the United Kingdom?

  I'm visiting the United States in a few weeks and I'm looking to buy an iPhone 7 so I'm here, right in saying that it is unlocked, it will work perfectly once I am back in the United Kingdom with my UK SIM card?

  Hello bigbigdan1000,

  Thank you for using communities of Apple Support.

  I understand your message you will buy an iPhone Unlocked 7 while in the United States and want to know if there is work, when you return to the United Kingdom. You will need to buy the T-Mobile or AT & T version of the iPhone in the United States, a GSM model, so he could work in the United Kingdom. Additionally, make sure that you buy the version without SIM card, you are free to use a SIM card from any carrier that provides service for iPhone.

  Country view with taken LTE networks supported

  Best regards

• Download Nikon D90 photos via a cable of Photos does not work. The picture freezes and does not matter. Any ideas?

  Download photos of Nikon D90 Photos OS El Capitan 10.11.16 cable does not work. The picture freezes and does not matter. Any ideas?

  Try with Capture of Image (in your applications folder)

  LN