distnoted consume 100% cpu

Similar Questions

• Safari more than consuming 100% CPU

  I am currently working with Safari 9.1.1 and whenever it is open it consumes 100% CPU and causes fans on my 13-inch MacBook Air to the race. For example, while describing the problem in Safari with only this tab open my CPU is 102.3% (33.2 MB memory). Besides the closure of the only open tab CPU usage remains high until I have completely quit the application. If I open the same page in another browser, the CPU of the other browser usage is much lower. Any ideas as to what is the cause and how it can be fixed will be very appreciated.

  A simple reset of the SMC should solve this problem. Please read this article to know how to do this in your device:

  Reset the management system (SCM) controller on your Mac - Apple Support

• Oracle to consume 100% CPU

  Hello
  
  I'm under Oracle XE 10g on Centos 5.5. Most of the time that my database performs very well but sometimes (usually in 2-3 days), it becomes very slow. When I run 'top' on linux it shows me that the Oracle processes consumes 100% CPU.
  Can anyone suggest me please how to start to find the reason? I have doubts that some report done this but I don't know which. The application was overturned has more than 150 reports so it is difficult to find who is this? Also the processor does not become free, until I bounce the database (I tried to wait another 24 hours). In my opinion, if a report is by doing this, the processor must become free when the report is finished. I have very little knowledge about DBA.
  
  Thank you
  
  Habib

  Download statspack running on your database. The next time, the CPU hits 100%, you will be able to find the best CPU consuming queries (as appropriate).

• Upgrade to Win 8.1 the fan runs all the time and Raw (Silkypix) converter consume 100% CPU resources

  Hi, after upgrading to win 8 to 8.1 win my converter (Silkypix) raw program running extremely slow and consuming 100% of CPU. VAIO all updates completed, all Win 8.1 updates made. ATM Radeon HD 7500 M / 7600M (Maj) with 2 GB RAM dedicated.

  In addition, the fan works almost all the time that was not the case with Win 8.

  Vaio SVE1712Z1EB with 8 GB of RAM, i7 processor execution.

  SeanQ, after some time looking for a solution I finally found it on one of the vaio sites forum: it is the Radeon driver that must be installed from the Vaio support site. NOT the driver the latest AMD site. It does not solve the problem.

  I did as follows: device, graphics card, Uninstall Manager. Did not help. Went to AMD in Program files. Setup.exe has begun, but instead of installation, clicked on uninstall. In this way, I uninstalled the driver former AMD and bad news from the site of AMD. I had to manually uninstall the driver in Device Manager, several times. Finally, I went to the site of Vaio and tried updating the driver. He failed. Reset. Manually start the update of the Vaio AMD driver. Finally it worked.

  The fan is now more or less normal speed.

  Overall, I spent 15 hours looking for this solution. How much is my time worth? Just joking, I'm happy that I found the solution.

• How to list users oracle with the 100% CPU usage

  Hi Hussein.
  
  Sorry it is not really related to EBS :)
  
  EBS R12 (12.0.6)
  4.6 RHEL
  
  I see high utilization of the processor for the "frmweb" process intermittently Sometimes they show once a week.
  Here is the result of the 'top' command

  top - 17:02:38 up 132 days, 20:16,  5 users,  load average: 1.17, 1.10, 0.89
  Tasks: 523 total,   2 running, 521 sleeping,   0 stopped,   0 zombie
  Cpu(s):  9.9% us,  2.8% sy,  0.0% ni, 87.4% id,  0.0% wa,  0.0% hi,  0.0% si
  Mem:   8309152k total,  8287716k used,    21436k free,     7652k buffers
  Swap: 10482308k total,  1987192k used,  8495116k free,  3741056k cached
  
    PID USER      PR  NI %CPU    TIME+  %MEM  VIRT  RES  SHR S COMMAND
  21680 appldev2  25   0  100  26:47.62  5.9 3071m 476m  14m R frmweb
  27832 root      16   0    1   0:00.41  0.0  2576 1268  780 R top
      1 root      16   0    0   2:21.02  0.0  3504  444  416 S init

  How to get this list using ps - ef or any other linux command (without using the 'top') so that I can write a cron to kill this fugue jobs everyday at midnight.
  
  
  Thank you very much

  Hello

  There are a lot of links that should be useful here. Some links are referenced below:

  UNIX command to find the CPU usage
  http://www.Cyberciti.biz/FAQ/UNIX-command-to-find-CPU-utilization/

  How to Linux CPU utilization?
  http://blogs.Oracle.com/Pranav/2009/02/how_to_find_out_cpu_utilizatio.html

  Google search for "Use of the UC Linux" and you will get many occurrences!

  BTW, why do you want to kill these processes manually? You should find out the reason, so having a high utilization of the processor rather than kill those processes.

  Note: 745711.1 - process forms (FRMWEB) consumes 100% CPU in Oracle Applications R12
  Note: 789659.1 - how to generate a stack of forms with Applications R12 Trace

  Kind regards
  Hussein

• "Stop IMAQ" takes 10 sec to run and consumes 100% of CPU

  Hi, I'm calling IMAQ stop to put an end to an acquisition, but it consumes 100% of my CPU and takes 10 sec to complete (all your 100% CPU).  In our application, we have start and stop the device regularly, and that's exactly when the user wants the program is interactive, if this delay of 10 seconds is great irritation to them.

  My setup is - camera scan online Dalsa Piranha, RT 9 running on a desktop PC (it is compatible according to the test), PCI-1429 cameralink map.

  Any help or comments welcome.

  Thank you.

  Ah, I managed to solve it, but first, here are the answers to your questions:

  With the help of Stop and then close or simply close makes no difference.  The judgment takes so long that I just used a probe before and after on the cluster of error and with function of probe of 2009 timestamp I could easily see how long it took.  For a more detailed analysis of the time I use the United States available with RT timer

  Anyway, the way I solved the problem was ensuring that I stop acquisition BEFORE the clock of the camera line is stopped.  So stop IMAQ probably wait for the end of the current frame before returning - and if the clock of the line stops at Midway through a framework (as was the case), a timeout of 10 seconds causes probably Stop back later.

  The clock of the line is powered by an acquisition of data (via RTSI) card and I simply closed the session to this counter after calling IMAQ stop.  Data acquisition interface is not displayed in the example above, as it is coded in an another vi.

  Thanks for all the help.

• iTunes uses 100% CPU usage

  Hi, I use the latest version of iTunes 12.3.3 on Windows 7 64 - bit with Intel Core i5 and 8 GB of RAM. Whenever I run iTunes, everything becomes so slow. I checked my PC's performance in the Task Manager and the CPU usage is 100%. The strangest part is that even if I close iTunes, it still consumes my CPU at 100%. I tried to reinstall several times. I even downloaded it three times but nothing helped.

  Hi salonpas,.

  Sorry to hear that you are having problems with iTunes on your PC. Let's see if we can get smooth it.

  Now, I know that you have already uninstalled iTunes and reinstalled, but you did in the order indicated in the article below. If this is not done in this order, usually issues will remain when you use iTunes. The order in which it should be done is this.

  1. iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4. Hello
  5. Apple Application Support 32-bit
  6. Apple Application Support 64-bit

  Once you have done this, try installing again.

  Remove and reinstall iTunes and the components of the software for Windows 7 and later versions
  https://support.Apple.com/en-us/HT204275

  Let me know if it helps.

  Nice day!

• iP7220 causes dllhost.exe COM Sorrogate loop using 100% cpu

  Just bought a new iP7220 of the Amazon and installed on my Vista Home Premium 32-bit machine.  Installation has caused a massive downturn resulting in a dllhost.exe - loop of COM Surrogate that consumes 100% of my CPU, and most of my RAM.  No idea why... and what to do about it?

  Hi tfnj,

  The problem you are experiencing is especially likely with an update of Windows or the version of Internet Explorer installed on your system.  Because every system is different, we recommend to contact Microsoft for assistance with resolving this error on your system.

  You can reach Microsoft Support call 1 (800) 642-7676, or by visiting http://support.microsoft.com/ .

  It has not responded to your question or problem? Please call or write to us at one of the methods on the page contact us for further assistance.

• checking update running for hours at 100% cpu

  My daughter clicked on search for updates on his laptop under w7.  She was finally installed ok updates on 15 August.  Checking the updates worked for hours and consumes 100% of cpu.  He updated in August, is the other officer on win 7 update relevant?

  Windows 7 update problems? First read this.

  :)

• Windows Update Service consume 100% of load on a kernel (Windwos 7)

  Hello

  This Monday week Windows update service (wuauserv) is constantly consuming 100% of load with one heart. The system is completely updated, all the updates are applied. I know that Windows update is generally the software kind of crap (sorry guys, but there are a lot of things to improve) and usually consumes CPU high for a long time just check the updates (installation also last very long), but this time he keeps everything simply.

  Restaring the service did not help. Restart does not help either. I tried to re - install all the com - dll, restarted the service,... nothing helps. Then I tried to apply the tool but this Fixit tool seems to be "smart" enough and starts the wuauserv service in order to detect problems--> same charge again.

  My system is Windows 7-64 and is usually very fast (Core - I 7, 2.6 GHz, 8 GB of Ram, 512 GB SSD) is NOT the PC.

  Thank you

  KE

  Some additional background information, since this topic got referenced from another site: in the case where the installer of KB3161608 returns "the update is not applicable to your computer", the sine qua non, KB3020369, is absent.

  "To apply this update, you must install [...] April 2015 maintenance battery update for Windows 7 and Windows Server 2008 R2 (KB3020369). »

  Best regards, VZ

• ESXi 4.1 - pics Win2k8R2 VM 100% CPU

  I have a Dell R410 server with 2 x E5620 2.5 Ghz processor sockets.  As by the Vsphere client, given that each outlet has 4 cores and hyper threading is enabled, I have 16 logical processors = about 17 k MHZ at my disposal.

  My collegeue has created a virtual win2k8r2 with 1 virtual processor machine.  For this particular VM on the 'Summary' tab, 'Resources' box shows the "consumed" host CPU ranges from 500-2 500 MHZ.  To my knowledge all other ESXi CPU settings (such as Reserved/limit) for this virtual machine have been left to the default values.

  When I connect to the console of windows for this virtual machine, the properties of the computer says processor: Xeon E5630 2.53 GHz.  I then launch Manager tasks and on the performance tab, and not to shows me only one box for the CPU usage history as if it had only 1 CPU multi-threading.

  Issues related to the:

  When the graph shows that the CPU spikes on a regular basis 100% than what it means?  As I said above, the host CPU speed varies between 500-2 500 MHZ.  Why is does not use the other 15 Mhz k?  What is 1 virtual processor depending on what I should see boxes for the number of CPUS in the Task Manager?

  I'm a bit lost when it comes to all of these variant of CPU types references or how he translates what should I see in Windows Task Manager.

  for example, is the highest 1 virtual CPU assigned to my VM = 1 socket physical CPU, which in my case is equal to 4 physical cores or 8 CPU "virtual" because of the hyper-threading which must be equal to 8 boxes of CPU usage in the Manager of tasks in windows?

  Details on the above would be greatly appreciated.

  Thank you

  Welcome to the community - now confuse you more - a virtual cpu (VCPU) is scheduled for a logical processor (LCPU). A LCPU can beither a physical core or a hyperthreading - so the only one VCPU is scheduled on one of the 16 LCPUs present your host. This means that a single VCPU will have access to a maximum of 2.5 - GHz

• 100% cpu

  FF uses 100 + CPU on my MacBook, if not totally quickly updated. This, despite making all the suggested fixes, several times.

  It got so bad that it overheats my Mac constantly, causing my fan go on uninterrupted full breath, even when he is in the background, so I basically have to stop using it.

  Mozilla should take seriously and review this off-road browser.

  When they can. Many other users also need help.

• 35.0 Firefox uses 100% cpu on Mac Yosemite 10.10.1 then either breaks or needs force quit.

  I had this problem since installing Yosemite and using 34.0.5. I upgraded yesterday to 35.0 but still the same problem. Firefox will work happily for a while and then all of a sudden will use 100% cpu. I disabled all extensions and plug-ins and that made no difference. If I use Java (8-25), it will usually make it crash but not always.

  To make things worse, the accident report appears in Greek (which is considered in another question already).

  Have you tried to reset Firefox? Refresh Firefox – reset the parameters and modules

• Firefox and Shockwaveflash 14.0.0.145 using 100% CPU

  Firefox (v30.0) normally uses the CPU of 2 to 6%.
  When I start a video using shockwave flash 14.0.0.145, firefox uses 20 to 40% of the CPU and shockwave 50-80%.
  For the most part resulting in a total of 100% CPU usage.
  This problem occurs for a week or two.
  I am running Microsoft Vista.

  You can check for problems with the current versions of the plugin Shockwave Flash and try this:

  • Check updates for your drivers drive graphics
    https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration
  • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)
  • turn off hardware acceleration in the Flash plugin

  See also:

  • http://KB.mozillazine.org/Flash#troubleshooting

• Why Firefox uses 100% CPU when I am connected to eBay?

  Firefox uses 100% CPU when I connect eBay.

  Hi apdubois, it is useful to know that Flash is the problem but, as you point out, life without Flash is not very interactive.

  It is a standard orientation that addresses the most common reasons for problems of Flash in Firefox. I'm sure you've seen some of it before, but just in case:

  (1) make sure that all recorders/downloaders who interact with Flash media are as up-to-date as possible, or disable them temporarily.

  (2) disable graphics hardware acceleration in Firefox and Flash

  (A) in Firefox, uncheck the box here and restart:

  the button Firefox orange (or the Tools menu) > Options > advanced > General > "use hardware acceleration when available.

  (B) in Flash, see this article from Adobe technical support: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues

  (3) turn off protected mode (Windows Vista/7/8)

  See this article from Adobe support under the heading of 'Last resort': Adobe Forums: how to fix protected Flash Player for Firefox mode?