Windows Update Service consume 100% of load on a kernel (Windwos 7)

Similar Questions

• Vista 64 SP2: when you run windows update, trustedinstaller takes 100% of one of the drivers for more than 20 minutes

  I recently bought a new computer, when I run Windows Update there is a process called TrustedInstaller.exe, taking 100% of one of the cores for a very long time (> 20 minutes).

  I have vista 64 SP2 and all updates installed (took me over 3 days to complete).

  Also, when I try to install additional features of windows (for example. IIS) the same thing happens, trusteinstaller takes 100% of the base and install new features forever.

  I have not installed additional software so far is very little probable that a virus or spyware is the cause. When I'm not updating the an or install features of windows, the computer running quickly and the cpu load is not high at all.

  How long was the computer connected to the internet before you installed Avast?

  Can update you Avast manually?

  The above, see if a reset fixes the problem:

  How to reset the Windows Update components?
  [Access KB971058 Internet Explore 32-bit only; [Throws the difficulty in DEFAULT and AGGRESSIVE modes, and then restart & test]
  http://support.Microsoft.com/kb/971058

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Update problem. "Windows didn't start the Windows Update service on Local computer." Error 1067: the process ended unexpectedly. »

  I have a problem with windows update. When I try to start the windows update service, I get this, "Windows could not start the Windows Update service on Local computer. Error 1067: The process ended unexpectedly. I also see this in the event viewer.

  Log name: Application

  Source: Application error

  Date: 21/07/2012 10:40:20

  Event ID: 1005

  Task category: (100)

  Level: error

  Keywords: Classic

  Description:

  Windows cannot access the C:\Windows\System32\wuaueng.dll file for one of the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing.  Windows has closed the program host process for Windows Services because of this error.

  Program: For the Windows service host process

  File: C:\Windows\System32\wuaueng.dll

  Tried regsvr32 c:\windows\system32\wuaueng.dll and got "the"C:\windows\system32\wuaueng.dll"module has been loaded but the call to DllRegisterServer failed with error code 0x80004005.

   

  SOLVED!

  Hello

  Follow these methods.

  Method 1: Try to re - register the file c:\windows\system32\wuaueng.dll

  To save the c:\windows\system32\wuaueng.dll file, follow these steps:

  a. click Start, type run.

  b. now, tin the window run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.

  c. When you receive the following message appears, click OK:

  DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

   

   Method 2: If this does not help, you can reset Windows update components and check.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

• Windows 7 Home premium, HP touchsmart tm2 Windows update service does not

  Recently, the hard drive on my laptop completeely failed and had to be replaced. Then the BONES had to be re-load. Since then, windows update service does not work

  It wouldn't make any difference, if you upgrade to the version professional or ultimate edition.

  Try the following at the bottom of the link to solve your problem.

  http://helpdeskgeek.com/Windows-7/cannot-run-Windows-Update-on-a-Windows-7-PC/

• Windows 7 64-bit: Windows Update Service is not running. After the restoration of 500 GB to 750 GB HD drive.

  I was running Window 7 64-bit Ultimate on a laptop Asus N series with a Western Digital 500 GB HD with no problems. I buy a new Seagate 750 GB hard and sustained up to my computer using Macrium Reflect. When I restore my drive on the new Seagate 750 GB HD everything starts fine, but Windows Update does not work as in the post:

  Windows 7 64-bit: Windows Update Service not working (but it runs in services.msc)

  I went through everything in this announcement and nothing has worked. I have no idea what to try and I am deployed to Iraq with the army so I can very well take in anywhere to have watched or call technical support. Help, please!

  First of all, thank you for your Service !

  See if this hotfix solves the problem - an update that improves the compatibility of Windows 7 and Windows Server 2008 R2 with the Advanced Format drives is available
  Be warned, if the following error occurs during the installation of the hotfix, it is the same mistake that the hotfix is intended to correct.

  Setup has encountered an error: 0xc8000247

  That is the same mistake noted in WindowsUpdate.log when updating fails

  FATAL DtaStor: DS: 0xc8000247: JetInit failed
  DtaStor FATAL: Failed to initialize the data store, error = 0xC8000247
  FATAL DnldMgr: DM:CAgentDownloadManager:CheckAllCallDownloadStates: GetSession failed with 0xc8000247

  If the processor is Intel, you can update the fast Intel storage technology driver to resolve the error.
  Suggest you check the ASUS website to see if they have a newer driver of TSRI.

  Download HP update Intel Rapid Storage Technology driver
  Error messages appear during the update of Windows, when you insert the card or using Live Mail

  In another thread with this question, someone with a Sony laptop used the download above HP to solve the problem but, I can't recommend it.
  Here is the thread-update Windows 7 windows broken after clone disk

  MowGreen
  Expert in Windows IT Pro - consumer safety

  * - 343-* FDNY
  NEVER FORGOTTEN

• I wanted to disable Windows update service from command line. can you help me please on this?

  I wanted to disable Windows Update service by command line can help me on this.

  Hi Vikas Sharma,

  We do not recommend to disable the Windows Update service.

  However, you can try following step below:

  > In the Windows command line type the following command, and then press ENTER:

  > start wuauserv sc config = disabled

  Please let us know if that helps.

• Windows update services stopped and wouldn't

  Today, after the last windows update run, restart my computer it has not started normally, it goes to the point where you see windows 7 symbol but then nothing happens.

  I had finally start my computer in "safe mode with network" option, now when I try to solve the problem using windows update, I got an error "Windows update services are stopped" and it would not be updated

  Help, please

  Hi mjfico,

  Mode safe mode with networking starts Windows with a minimum of drivers and includes the network drivers and services needed to access the Internet or other computers on your network.

  ·        Did you receive an error message when the computer does not start in normal mode?

  1. from safe mode try to start your computer in a clean boot. Link below will help you to start the computer in clean boot:http://support.microsoft.com/kb/929135

  Restart the computer and verify if you are able to boot.

   

  Make sure that you reset the computer in step 7 normal when the troubleshooting steps are complete.

  2. If you are unable to clean boot, and then you can restore the system to safe mode. Links, please refer to: what is the system restore:http://windows.microsoft.com/en-US/windows7/What-is-System-Restore

  Advanced startup options:http://windows.microsoft.com/en-us/windows7/Advanced-startup-options-including-safe-mode

  Note that you will not be able to undo the system restore if you perform the system restore, safe mode.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista - Error Code: 0 X 80072726 (Windows Update Service does not start)

  When I run Windows Update it says that it is impossible to connect to the service because the service is not running. When I go into the Services to start the Windows Update service, it says: Windows could not start the Windows Update service on Local computer. Error 0 x 80072726: an invalid argument was supplied.

  I am running Vista - 32 SP2, Mcafee antivirus (day and daily scanned), IE v8.0.6001.18904

  Everything was working fine a week ago.  The only thing I changed on my PC since it is that I have installed Bioshock 2 and Games for Windows Live.  Uninstalling these applications has not solved the problem.

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. manually & repeatedly updating the McAfee application until you get a invite "no update more".

  3. components of Windows Update (new) reset: http://support.microsoft.com/kb/971058 [access KB971058 via IE8 only;] Run the difficulty in DEFAULT and AGGRESSIVE mode]

  4. restart & test.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Try to install a Windows Update Service Pack__

  Installation failed - element not found - details-

  Error: ERROR_NOT_FOUND (0 x 80070490)

  Help! How to install updates?

  CrystalBall © SEZ...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How can I reinstall the Windows Update Service

  Windows Update service not installed (not class in mmc.

  I ran the following at the command prompt suggestion in the Forum answers:

  Microsoft Windows XP [Version 5.1.2600]
  Copyright (C) 1985-2001 Microsoft Corp.

  C:\Documents and Settings\schamber > net stop wuauserv
  1060 system error has occurred.

  The specified service does not exist as an installed service.

  C:\Documents and Settings\schamber > rmdir /s %windir%\softwaredistribution\wuredi
  r
  Are C:\WINDOWS\softwaredistribution\wuredir, you sure (Y/N)? There

  C:\Documents and Settings\schamber > net start wuauserv
  The service name is not valid.

  More help is available by typing NET HELPMSG 2185.

  C:\Documents and Settings\schamber >

  I just ran the soft Windows Center FixIt for Windows Update with the following result:

  Update Windows components must be repaired... No fixed X

  Try to reset the windows update components and verify if you are able to install.

  You can reset windows update components by referring to article:

  How to reset the Windows Update components? http://support.Microsoft.com/kb/971058/en-us>

  Download and save the fix it 50202 from the page above.

  Close all open programs and browsers before you run the fix it.

  Remove all excess icons (each of them, essentially) of the taskbar (lower-right)

  As downloads fail, when you run the patch, choose it is the default mode when you run it the first time.

  When he finished, check if download updates now.

  If updates are still not download after running it, then run it again and choose it's aggressive mode.

  Then reboot and see if the download updates now.

  UTC/GMT is 17:52 on Sunday, December 11, 2011

• Windows Update service does not

  I have Windows Update set to update automatically, but saw a red shield X and had not been asked to install updates recommended as before, so clicked on "Check For Updates". Received a message that says "Windows Update cannot check for updates because the service is not running. You may have to restart your computer. I did, I tried again and got the same message (repeatedly). Any suggestion would be appreciated. Thank you.

  "Source: error message 'Windows Update cannot Check For Updates' when you try to install updates"

  1. click on Startand then click Control Panel.

  2. click on Administrative Tools.

  3. in the toolbar to the top of the Administrative Tools window, click the icon for the display list options, and then click large icons.

  4. double-click on Services.

  Make sure that the service "In the Background Intelligent Transfer Service" is running. If not, right-click on it, and then click Properties. The click Start.

  

  Make sure that the "Windows Update" service is running. If not, right-click on it, and then click Properties. The click Start.

  

  If the Windows Update service is running, but the service still does not check the updates, configure to enable automatic updates in Windows.

  To activate the automatic updates yourself, follow these steps:

  1. click on Start, type Windows update in the search box, and then click Windows Update in the list of programs .

  2. in the left pane, click change settings.

  3. Select the desired option.

  4. under recommended updates, select the check box give me updates in the same way I receive important updates recommended or Include updated during the download, installation or advising me on recommended updates and then click OK.

  If still doesn't work, download and run the Windows Update Troubleshooter

  I hope this helps.

• Windows Update service will not work after upgrading the hard drive

  I'm running Windows Vista 64 bit, Home Premium SP2 with 8 GB of ram. I recently cloned my hard drive OEM of 500 GB, 5400 RPM Toshiba MK5055GSX via a standalone, dual drive bay dock for upgrade to a 750 GB, 7200 RPM, Western Digital WD7500BPKT. Since the clone/upgrade, Service Windows Update does not work and gives the message: ' Windows Update cannot currently check for updates, because the service is not running. " You may have to restart your computer. "And Yes, I checked and everything related to Windows Update seems to be 'turned on' or well defined, but the service will not work. Notes; Windows Update still works with the player "OEM", it is only the new WD drive that has the problem. Thanks in advance for any help or suggestion on getting this problem is resolved.

  This fixes my laptop http://www.realworldrobotics.com/troubleshooting-help/windows-7-64bit/windows-update-service-not-running-after-upgrading-drive

• I need to know how to enable the windows update service

  My PC has windows automatic update service disabled and I need to update my Vista Home premium but I can't because the error that I get when I try to activate updates, it's "the service does not work.

  So that Windows install important updates as they are available, turn on automatic updating. Important updates provide significant benefits, such as improved security and reliability. You can also set Windows to automatically install recommended updates, which can address non-critical problems and help enhance your computing experience. Optional updates are not downloaded or installed automatically. To learn more about the types of updates that Microsoft publishes, see this Knowledge Base article on the Web Microsoft Help and Support site.

  1. Open Windows Update by clicking on the button start , clicking all programs, and then click Windows Update.

  2. In the left pane, click on change settings.

  3. Choose the option you want.

  4. Under recommended updates, select the include updates in downloading, installing or informs me of the box updated recommended, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  If this isn't what you mean, then maybe see this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Vista-error-Windows-Update-service-is-not-running/ea17bdc9-125E-4130-A099-af547130d313

  or

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• Error Windows update cannot currently check the updates because the service is not running, you must start the computer, windows update services does not

  Original title: Windows Update service is not running / working and is not listed in services.msc

  When I go to windows update a red shield with a white cross appears and when I click search for updates this message appears:

  "Windows update cannot currently check updates because the service does not work, you will need to start the computer"

  * Restared several times-nothing has changed

  Despite what other threads have advised to:

  I checked in the services and WINDOWS UPDATE, Background Intelligent Transfer Service or encryption services are not listed!

   

  * I have changed the settings to "Never search updates" and then back to "install updates automatically" - nothing has changed

  * I ran the Malicious Software Removal Tool http://www.microsoft.com/security/pc-security/malware-removal.aspx- we say that everything was ok, but I can't always verify updates

  * I ran the download to reset windows update components http://support.microsoft.com/kb/971058/en-us but still I can not check updates

  (Nothing is in the update history)

  Am really worried!

  Thank you!

  Hello

  
  Have you made changes on the computer before this problem?
  Method 1:
  You can try to start the fix - it and check. Check out the following link.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  Method 2:
   
  You can read the following article.
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.

  Method 3:

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

• Windows updates - Service is not installed

  Original title: windows updates

  I try to install updates of widows in win 7 Prof but he says that the service is not installed. I tried to activate windows updates but gave an error.

  I am trying to install a wireless printer. Detects the printer it says installation failed.

  Windows 7 and earlier versions

  1. Click Startand then click Control Panel.
  2. Click on Administrative Tools.
  3. In the toolbar to the top of the Administrative Tools window, click the icon for the display list options, and then click large icons.
  4. Double-click Services.
  5. Make sure that the "Background Intelligent Transfer Service" service is running.
     
  6. Make sure that the "Windows Update" service is running.
     

  If the Windows Update service is running, but the service still does not check the updates, click on the number below to go to the article in the Microsoft Knowledge Base:

  306525 how to configure and use automatic updates in Windows