Distribution Kit for the CVI 8.0 missing files...

Similar Questions

• The manufacturer of Distribution Kit is the engine Variable OR in an old distribution you are looking for, can't find it and fails to build

  I can't build a distribution kit, because the Builder seems to have saved a path to the NI Variable engine that is not valid.  I seem to have the Variable engine OR installed.   There is NEITHER Variable engine 2.5.0 fichiers.xml loaded on my computer (see the attachment for the list of loaded drivers).  I don't seem to be able to break the bond of the CVI at my recent installers for drivers.  I tried to create a new installer, but had the same problem.

  I'm running a 64 bit computer laptop with Windows 7, a 32-bit application, CVI generation 2010 running.

  The default path is the path to any distribution installed OR engine Variable on your machine. For example, if it has been installed from a driver disc, the path would probably be D:\. However, since the images you posted, I see that you were being asked to provide the path to one of your previous ATAHM distributions. It has been home to this path:

  c:\Users\chill\Documents\Development\AATAS\ATAHM\distributions_ATAHM\ATAHM Oct 24 BitDefender 2011\

  Do you still have this distribution? If you can point to this distribuiton, you should be good.

  Now back to the error you saw... Your version of this manifest .NET file matches (except for the version number) review from the Base of knowledge, so you should try to replace it with Revision B (rename it to .xml NI .NET Framework 2.0 Language Pack x 86 Installer {F8ECD2D6-659C-49EB-8454-5F8F7B526FCF}). Make sure that you restart CVI after the file-swapping. I think that in order to solve your problem. If it isn't, you need to let me know what is the new number, or if you somehow still see the same error message.

  A. Mert

  National Instruments

• When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file.  I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for

  When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file. I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for these files. What can I do to be free from this error?

  OSstatus = error-37

  Note that this a Mac operating system error.

  http://forums.CreativeCOW.NET/thread/145/865447

  Error when importing the file: slash or other character in file name

  http://forums.Adobe.com/message/3729601

  The build error: slash or other character in file name

  http://forums.CreativeCOW.NET/thread/145/868994

  The build error: complete startup disk

• Save the distribution source for the previous version

  Hello

  I am trying to use the tool run a Labview VI in VBAI. I use LV2013 SP1 and VBAI 2013. The step run a VI Labview gives me an error saying "this step supports LV2012 or earlier. When I record to LV12, this time an error comes up saying "the VI has not been compiled for the specified remote target or it is not registered with LV12." After I read the forums and help documents, I see that this problem can be solved with the recording of the VI for distribution (LLB).

  But when I open the project, it becomes LV2013 and LLB built as LV2013. So I go back to the first step, saying: "this step supports LV2012.."

  How can I build a source like LV12 distribution using LV13? I couldn't find a solution.

  You can either download a 2012 version (ask your local sales engineer because it's an older version), or

  "Save your VI as" for 2012 and post the zip files exported to the Commission on conversion. Can someone respond and wrap your files in 2012 VI + llb ^^

  - http://forums.ni.com/t5/Version-Conversion/bd-p/VersionConversion

  -Eric

• RDPCLIP. EXE missing startup file (system32 dir). Unable to restore the system because of missing file unspecified.

  Windows 7 (new machine, not updated). Autoruns shows this file RDPCLIP. EXE be found at startup. This file is usually located in the System32folder. Unable to restore the system of time earlier because of unspecified missing file (rdpclip.exe?). System seems to be runnuing normally except these two questions. Occasional freezes (once just by renaming the downloads folder). How can I get
  new file restored to the version of Windows 7?

  Note: CLIP.exe is in the System32 directory.

  Hi bigdome6984,

  If your machine acts as a Terminal Server, i.e. someone else connects to your computer using remote desktop, then rdpclip.exe will be loaded on your computer as part of the functionality of Server Terminal Server.

  RDSCLIP is loaded on the computer, allowing other machines to connect via Remote Desktop.

  It should be found at the following registry location:

  HKLM\SYSTEM\CurrentControlset\Control\Terminal Server\Wds\rdpwd\StartupPrograms

  Important Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756

  I hope this helps!

  Kind regards
  Gokul - Microsoft Support

• Provide read permissions to others for the weblogic/Managed Server log files

  Hello

  We want to give read access to others under linux for all the oracle weblogic logs including the journal .out file.

  We put 022 startweblogic.sh file. Set-aside are the output

  ----

  -rw - r - r-. 1 oracle oinstall 81586 Apr 15 22:43 access.log

  -rw - r - r-. 1 oracle oinstall 700087 Apr 15 22:45 DEV_Managed.log

  -rw - r-. 1 oracle oinstall 20553 Apr 15 22:49 DEV_Managed.out

  ----

  The only concern is its setting read other for access.log and DEV_Maanged.log but not for the log file of DEV_Managed.out

  Please suggest what file to edit.

  Thank you

  Mireille

  Hello

  Try to also change the umask 022 startNodeManager.sh file, and then restart nodemanager, then the managed server (to rotate the log .out file and create a new using the new umask)

  Kind regards

  White

• How can I add the Raw for the Canon EOS Rebel T6s file 5 Lightroom

  You want to know if there is a way to add the RAW file for the new Canon EOS Rebel T6s format to my desktop Mac version 5 of Lightroom.  All I found was the plugin cameraRaw 9 for Lightroom 6 that takes in charge of my camera. This does not work after that I have download and run the installation

  Thank you

  You will need to convert RAW to DNG for use in LR 5. Or you can go to LR 6. CameraRaw plugin is not relevant to LR. This is for Photoshop.

• Too big for the standard of encoding DVD file size - please advise

  Hi - I turned a 6-hour training session that went well.  I turned it to 1280 x 720.  For the web version, it will be no problem, as I'll just export to F4V.

  But I'm having a hard time finding for the DVD export settings.  I know that the drive is limited to 4.6 GB.  I broke up the sequences PPro CS4 30 minutes or more (some are smaller or larger than others).

  I first exported to QT, but found only 30 minutes export way too big (8 GB) and still it brought down to 2 GB, but which will only allow me to put 60 minutes on a single DVD vs the almost 2 hours I want to get on 1 disk.

  AVI is even worse.

  I know that widescreen is a larger size, so I'm willing to make standard NTSC, but I can just know that export by establishing in PPro CS4 allows you to do this work.

  Can someone advise me on this?

  Thank you.

  > Again and export of first MPEG-DVD works great. I exported it and then still chewed down from 60 minutes of finished video

  This seems really odd... to me... as looks that you encode twice, once in the body, and again in yet... but, if you are happy with the DVD, that's all that matters

  I'm still working with an audio track, from my camera, so no comment on your 2nd question

• SSD for the Scratch, Cache and swap file?

  Certainly, startup disk and RAID3 9-drive (7K 3000) the map of Areca-16. HDDs but... I was wondering, as I refine my construction, on the use of SSDS Strath, Cache and the pagefile.

  It seems to me that constant random access to these files (small for most), could be somewhat competing for overall throughput (they have been configured on the RAID3 alongside media and project). In an ideal configuration, it would be a practical or advantageous to have 2 x SATA3 SSDs RAID0 for Cache, the Scratch and the pagefile? (and whatever else reconstructible temporary structures). In addition, in order to move the traffic far form the Areaca PCIe lanes, would it be more effective to RAID0 on SATA3s to the mobo? What would be the ideal size for these disks (min and max)?  2 x 60GB would do? Or 2x120GB? More?

  I have also heard that, because of the nature of the scratch and cache, it would be better to have them on two separate drives? Or is it just an urban legend?

  Frederic,

  Bays of drive and the system configuration questions are good, but if I or someone had to answer us would be influenced by our own test files, projects, we have worked on, controller CPU, RAM, the card (or the lack of) and much more.

  Given that what you're building has several similarities to mine, I'll share some of my own conclusions. To the topic specific answers like "how many disks in a RAID before it's inconsequential", it depends on so many things you should probably stop asking questions like this, because it may depend on certain things - CODEC, number of layers, transitions, filters, etc..

  Things I'll comment based on similarities between the system you are creating and mine (X 58, 6-core CPU, 24 GB of RAM, controller Areca w / large cache (2 GB or more)):

  1 move the pagefile seems really make a big difference on my system. So therefore, I keep in my table of OS/programs.

  2. faster I ran used two large paintings with the projects, the media and all the files "scratch" on a table and "hide media" and released on the second. While the difference was not huge, the fastest result for PPBM5 comparative analysis was achieved but put 'media cache DB' on my OS/programs, which use SSDS.

  So, how do proceed you?

  1. load your operating system and programs on your disk boot or start table.

  2. set up your Areca and drives in RAID 0, load some concrete projects similar to what you'll be using this system for, and test. Run PPBM5 too, it's a very useful common denominator that can be used to modify your own system and do it before / after comparison of the changes you are trying. IMO, a drive of 9 or 10 RAID 3 or 5 (or 6 besides) works well enough for everything. [Readers here who have a big RAID 0 out of their motherboard, I don't know if this is true for you or not, my test was done with all the great paintings hanging on a controller from Areca]

  3. for answering your question about "Hard drives how much you" on your own system and with your own projects, simply repeat step #2 using a small RAID 0 array. Latest Areca SAS RAID controllers so fast, that I would say that you can count on very similar performance with a RAID 0 array with one less than road when you build the dos system to desired PARITY RAID; with the exception of RAID 6, of course, who would actually perform '2 disks' more small.

  4 configure your final bar selected with parity, load your projects and you're done!

  Another way, you can go forward? (Less time, less optimized, version case potentially filled with several discs, heat and energy than the 'optimal' generation) Note that I tested with a few large RAID 0 arrays that will be in my final build, and I use these disks for the storage of off-site backup.

  1 build your big array with PARITY from the outset.

  2. start to use the system and if it works well for you, you are finished.

  As for RAID 3, 5, 30 and more, I use my table of data for editing more video, so go with RAID 5 was a simple choice for me. That being said, it seems to me that in my system (using a large cache ARECA controller and drives of 1 TB 7200 32 MB cache) a player "a less" RAID 0 seems to work only about the same as a RAID 5, so I don't think that the ineffectiveness of the RAID 5 or RAID 3 for large files (aka video editing) may be noticeable.

  Kind regards

  Jim

• Sample oc4j - ra.xml for the adapter FTP to transfer files remotely

  Please provide a sample file and the detailed description of the oc4j - ra.xml for FTP adapter.
  
  < location connector-factory = name of the connector "ist/Ftp/FtpAdapter" = "FTP adapter" >
  < config-property name = "host" value="usunnbf29.us.oracle.com"/ >
  < name of config-property = 'port' value = "21" / >
  < name of config-property = value "username" = "ftp" / >
  < config-property name = "password" value = "password" / >
  < config-property name = "useFtps" value = "true" / >
  < config-property name = "walletLocation" value="D:\wallet\ewallet.p12"/ >
  < config-property name = "walletPassword" value = "welcome1" / >
  < config-property name = "channelMask" value = "both" / >
  < config-property name = "securePort" value = "990" / >
  < / connector-factory >
  
  
  I use windows as the source and target server. Runtime runs on different windows machine. What are the values that are required for the remote server... namely, walletLocation, walletPassword.
  
  I changed the value of the location, host (ipaddress), username (windows login) and password(windows password) only. After restarting the server, files did not move away.
  Make the need for the directory to share, files must be given permission. I did all these things, but no avail.
  
  Please help.
  
  Thank you

  Check this box:

  http://www.Oracle.com/technology/products/integration/adapters/PDF/Adapter_TN_002_FTPAdapter_SecureFTP.PDF

  http://download.Oracle.com/docs/CD/B31018_01/Relnotes.1013/Relnotes/adapters.htm

  Hope this will guide you.

  Marc
  http://orasoa.blogspot.com

• For help. DLL file / library call for the USB camera Image data file

  Hello

  I'm new to the use of the library and imaging data files. Attached is a picture of the "call library leader." I don't know how to set up the entry of 'beef' / frame buffer.

  More information is explained in the attached PDF file.

  Basically, I just need to recover data from image and convert it to a real image. I sought help of LabVIEW and other sites files, but I can't find a clear solution. Any help would be appreciated.

  FYI - I can communicate with the camera using other functions of library file. Opens the camera, I can set/view KING and other data. I can't quite understand the frame buffer.

  -griplegraple

  
  

• I moved Dreamweaver cs5 of the old imac for the new imac. Sites / files?

  Where is the information from the Sites? Should what file I go as well?

  Go to the old box and use Site Manager to export your site definitions. Copy them to the new box and import them with the Site Manager. Copy the files of the site on the old box and paste them into the same places (folder structure) on the new box. You have finished...

• I bought the ultimate kit for the key windows when my drive comes can I do a full format and then reinstall ultimate?

  My windows 7 ultimate dvd for some reason any says it was countefit, so I bought a kit of windows ultimate 7 I entered the key immediately and now it works fine, but the question I have is can do a format of my discs when the dvd comes in the mail?

  The format? You probably mean a clean install, in which case Yes, although you may need to use the phone activation & wait for a real person to answer

• Moving ' excluded e-mail: return of list or brochure Distribution "program for the next step

  Hi all, I'm digging through some of our programs and I noticed there are a large number of blocked contacts in a specific program with the status not ' excluded e-mail: return list of Distribution or a brochure. Delve into the documentation, I realized that this means that the contact has already received the specific e-mail. For this reason, I want to move those contacts to the next step in the program so that they can continue to be fed in bulk.

  1 - is the right thing to do with contacts with this status?

  2. is there an easy way to move contacts with this status to the next step in the program of bulk?

  In addition, we still use Eloqua9.

  Thank you

  Russ

  One solution is to filter all who may have gotten the email before sending it a step in your program with a decision rule; If they received before, proceed to the next step, otherwise, send email.

  The other is at the stage of email send in your program (you may need to contact support and have them activate this for you), but you can understand step to proceed to the other steps errors sending email or allow you to return at the same address:

  

• HP quilt making kit: kit for the quilt label

  I downloaded this program on the desktop for years.  Since then I have 10 Windows.  Now I see the files but cannot open.  ???   Do I have to buy this program once again?   Right now impossible to find one that I bought for $40.

  Fortunately, I have contacyed the HP support team.  After that severak failed attempts, he was able to reinstall the program from the disk & work his magic, got to work.  I am very grateful for this help.  Unable to find other affordable programs so was trying to use that I bought years ago.  Fortunately his work and made a label custom special quilt.  :-)