Diver problem EliteBook 8740w

Similar Questions

• EliteBook 8740w: HP elitebook 8740w mobileworkstation

  My HP elitebook 8740w mobileworkstation, continues to give me a message unknown device is not a driver & shows the problem with the PnP devices.  Trying to use my laptop to hook a projector, but it will not mirror or even appear on the screen.  Can anyone help?

  Hello:

  I doubt that this missing driver is the cause of the video problem you are experiencing.

  However, you need the driver for this device.

  This package provides HP 3D DriveGuard to the notebook models and operating systems. HP 3D DriveGuard receives notifications of the built-in accelerometer and protects the hard drive (HDD) by automatically "the heads of parking" to reduce the risk of damage if the laptop is accidentally moved or deleted.

  FTP://ftp.HP.com/pub/SoftPaq/sp53501-54000/sp53795.exe

  As much on the PC do not project onto a screen, the only suggestion I can offer is make sure you have installed the driver of graphics for model graphics card that has your laptop.

  There are pilots of 7 cards listed on the support page, so unfortunately, I don't know that you need.

  A missing graphic driver is usually the cause of problems like this.

• HP EliteBook 8740w p/n VB744AV: Base model with only 2 RAM slots does not level up to 8 GB of RAM, 6 GB only?

  So I discovered that my laptop is a version of the basic model of the Elitebook 8740w so I'm missing 2 RAM slots. However, I went to upgrade my RAM from 4 GB to 8 GB the other day, and after ensuring all the RAM was split and firmly fixed my laptop would only flicker the lights indicating that my ports were dirty, RAM was split in correctly or I ordered the bad RAM sticks (which I didn't, I double checked). So I have of the 4 GB split into the slot of the RAM under the keyboard and replace one of the original 2 GB sticks in the other RAM more accessible location at the bottom of the computer. Laptop started fine. I'll try the RAM slot again later tonight when I get home from work, but if anyone has any experience with this issue, I'd love to hear corrections or explanations on what I can do wrong.

  I also want to note that I checked the specifications of the computer and it says that it should support the 8 GB of RAM or more. However I do not know if this is a generalization of the product since it usually comes with 4 vs slots of RAM upgrade only the 2 I have in my laptop.

  Quad Core versions have 4 RAM slots and Dual Core 2 slots. Max 32 gig and 16 gig respectively. Try the reslotting and let us know how it goes. 8 concerts must be OK, assuming that compatible. If the problem persists, please provide the manufacturer for both modules reference numbers.

• EliteBook 8740w wake after sleep

  Hi all

  I bought laptop HP EliteBook 8740w

  I have several problems...

  Thus,.

  Configuration:

  (i5-520M, 4 GB, 320 HARD drive ATI 7820 M)

  OS - preinstalled Windows 7 Prof 64 bit

  All windows updates and the latest drivers for the chipset, video and so forth have been installed.

  1. computer laptop doesn't wake up after the mode 'sleep', i.e. all coolers start working really hard and LEDs are burning bright, but leaves black screen (5, 10, and several minutes, but no progress)

  I assumed problem with the BIOS, I have BIOS F.03 28.04.2010 but worm real version is F.09

  I went to the HP support and downloaded the latest site.

  But I can't update BIOS!

  If I use HPQFlash.exe program, he said: "after the operating system restarts, BIOS will be updated", but after restarting the BIOS operating system has old version

  If I use the options - key USB system after formatting and copying files (I checked the files on the flush), but when I try to load OS from hard Ras (after restart of ESC, F9), I see error - this disc is not system drive has chosen another, or something like that

  I tried at least trees different readers RAS, and always had the same result.

  I even downloaded bios f.08 version, but the same situation too.

  So, I try to summarize the problems

  1. computer laptop is not wake up after fashion 'sleep'

  2. it is not able to update BIOS

  3. What's wrong with loading PC from a USB...

  Is any body could help me... pleeeeeeze

  To solve the problem with the sleep mode, need update Intel management engine complete

  I've downloaded firmware from here http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4138087&prodNameId=4137878&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-85374-1

  waking up after sleep works now!

  BTW

  about boot from USB, I tested the USB hard disk - it worked properly...

  but the boot of steel hunting impossible...

  and the BIOS is not updated either...

• EliteBook 8740w thinks that the lid is closed, but it is open?

  Hello

  I have an EliteBook 8740w running Windows 7 64 bit and I have a strange problem where the laptop seems to think that the cover is closed when it is open.

  If the cover is open, the screen is off the touchpad and keyboard, the two do not work and not the function of the buttons volume or wifi. When the screen is almost completely closed the screen turns back on, the keyboard and the mouse are beginning to work again, but it is not usable, because it is about 5 degrees, far from fully closed.

  It seems that it is just reverse how it is supposed to work?

  All this happened when I unplugged my power cord. The screen turned white and it has been in place since then. I tried several reboots, nothing seems to recover.

  I can run on my external monitor very well, so the laptop seems to be otherwise functional

  Thanks in advance for any ideas

  Maybe you did not reset properly.

  Remove the battery and adapter and all the things connected to the laptop.

  Hold the power button down for 1 full minute and only plug the adapter back to (do not insert the battery) and start.

  The next time you stop everything, install the battery.

• EliteBook 8740W after HP, SD card reader driver update appears as XD Picture Card

  Hello

  I have an EliteBook 8740W mobile workstation, and it's been great up to a recent software update.

  I don't know exactly when it started because I use not the constantly SD card reader but after a recent update HP Support Assistant, the SD card reader has a problem: any type of card, I put in there, he thinks it's a xD Picture Card.

  I have several different SD cards and tried all. They work fine on other devices; but when I put in the card on the EliteBook reader, same thing: Xd Picture Card. If I click it to open it Windows says 'Please insert a Picture Card xD'

  Device Manager displays the card reader, like the three types of support:

  

  But if I turn off the device of xD-Picture card, it doesn't recognize any card inserted at all.

  So, basically, the SD 'detection', if nothing else, is broken, and he thinks that SD cards are cards xD.

  I tried uninstalling and reinstalling the full card reader drivers and it still does the same thing.

  Thank you!

  Right click on each of these Ricoh entries in Device Manager and select uninstall.

  When finished

  Right click on any device in DM and select 'Search for hardware changes' Windows reinstall the hardware and drivers, see if that helps, if not I think the reader can have due to a malfunction.

  Use a bright flashlight and make sure nothing got in the card slot that should not be there.

• HP ELITEBOOK 8740W compatible RAM

  Hello
  
  I have a HP 8740W with 4 GB of RAM and I added 2 GB Kingston PC 10600 S-9-10-F0.
  The BIOS detects the total RAM as 6144MB, but the test break-in says failure memory.
  
  It's this particular type of SODIMM incompatible with Elitebook 8740W, or it must be 4 GB already installed?

  Is there a list of brands and the RAM compatible?

  Thank you.

  Hello:

  I always get the memory with 8 little black chips on each side of the Board.

  http://www.Newegg.com/product/ProductList.aspx?submit=Ene&N=100007609%2050008476%20600000414%20600000406&IsNodeId=1&name=2GB

  The memory modules with 4 black chips on each side of the Board do not work for some reason any.

  May have to do with density.

  A 1, 2 or 4 GB chip should work fine.  This is other than a 4 GB module... memory will not work in DDR mode, but it will take place.

• WiFi not detected after installing Windows 7 Ultimate 64 - bit Elitebook 8740w

  Hello

  I used a DVD to install Windows 7 Ultimate 64 - bit to replace Windows 7 Professional 64 - bit on my Elitebook 8740w. In the end, I used a new facility as the upgrade option ended with a failure error. However, after the clean installation, it cannot detect any wifi. What drivers I am likely to need download and re - install?

  Thank you, in advance.

  Kenwin

  Hi, Kenwin:

  Here is the link to the wireless card driver you need:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=4137878&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_108502_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Where to find the drivers for my CD EliteBook 8740w reader

  I have an EliteBook 8740w, Windows 7 pro - 64. The system says my CD is no longer recognized, and that the driver is corrupted. "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  CD is indicated in the device as DVDRAM GT30L Manager but is listed as a Standard CD-ROM player and gives details of the manufacturer. How can I make and download a new driver?

  Thank you.

  Bill

  Hello

  Please try this one first:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Merry Christmas.

• EliteBook 8740w: core peripheral system problem

  It is under the properties of my base system device

  PCI VEN_1180 & DEV_0843 & SUBSYS_1520103C & REV_14
  PCI VEN_1180 & DEV_0843 & SUBSYS_1520103C
  PCI VEN_1180 & DEV_0843 & CC_088000
  PCI VEN_1180 & DEV_0843 & CC_0880

  Deiver does not load

  The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver.

  Once I click on update driver it tells me windows cannot fine sofware

  Hello

  The hardware id is for the driver from the link card reader.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4138088&swItemId=ob_79991_1&swEnvOid=4059

  Kind regards

  DP - K

• AP Div problem

  Hello

  Im sorry pretty new to the dreamweaver software as im use it to create an ebook of the school, so I will try the best to explain

  
  I created my website background/buttons and boxes in photoshop and slice to the top then added in dreamweaver, I'm now AP Div on adding the boxes so I can change it in dreamweaver, however the ap divs models continue to go diagonally to the left and I can't understand why. I know that its probably a newbie problem but hey im only learning.

  I'll post some screenshots of what I want to say and if you need more information please just asked (but explain where you need the photo/information of)

  
  Any help is appreciated, and if you're asking about the screen name her because everything I tried for 5 minutes was taken

  

  Look at this layout for a better idea and tell me what you don't understand.

  

• Possible questions DIV: problem of overflow

  I'm building a site that is having some problems. When I open the site in a browser (I use Chrome) runs a part of the text at the bottom of the DIV. This is not how I meant it (there should be about 30px room under the text). I don't know if it's something I could fix with a scrolling code (my DIV is set of heights, so I don't know if there is a better way to do it with scrolling and padding), or if it's just the browser. (I checked in Safari too, same problem)

  Thank you very much

  SO CSS for HTML so little?  Ouch.  And your CSS is very redundant prolix as well. Count how many times you have assigned a font!  Besides, you know that Myriad is not secure for the Web, right?  For those who do not have this installed font will see Times/Times New Roman - not a good swap!  You should always include a family of fonts in your posting so that these fonts are not installed will be ignored in the list. In addition, Myriad Pro (and all multiple word font names) must be enclosed in quotes.

  {#collegesuccess_content}

  float: left;

  height: 560px;

  Width: 940px;

  padding-left: 10px;

  padding-right: 10px;

  padding-top: 10px;

  padding-bottom: 10px;

  background-color: #7DA563;

  do-family: "Myriad Pro";

  }

  It is impossible to elements containing text.  What happens if I decide to make the text to display in my largest browser?  Yep - overflow.  There is no need to assign a height at all here.  Let the height of the content determine the height.  It goes the same for #collegesuccess_body and #collegesuccess_container.

• Table/div problem with IE

  I build a "Planner" in a table, and it seems OK in Firefox but not in IE. It's a work in progress, but IE does not allow table align correctly and help would be appreciated.
  
  In addition, the table and the left menu reside in a div (container2) that I put in 1900px width. Is there another way to determine its size or just add the components (menu more centrebody).
  
  The page is located at http://members.optuszoo.com.au/csteed/4R%20Conference/3day-program.html
  
  Thanks, Chris
  
  Contempt - solved the problem.

  I build a "Planner" in a table, and it seems OK in Firefox but not in IE. It's a work in progress, but IE does not allow table align correctly and help would be appreciated.

  In addition, the table and the left menu reside in a div (container2) that I put in 1900px width. Is there another way to determine its size or just add the components (menu more centrebody).

  The page is located at http://members.optuszoo.com.au/csteed/4R%20Conference/3day-program.html

  Thanks, Chris

  Contempt - solved the problem.

• 32 GB in HP EliteBook 8740w

  Hello

  I want to improve my Book Elite HP 8740w WD943EA #AK8 to 32 GB of RAM.

  What is the number of part of HP for 8 G byte memory modules?

  Ubuntu Linux 9

  VMware Workstation 7

  HP Elite Book 8740w

  WD943EA

  Hello

  Thanks for the quick response. According to this 32 GB is supported if you have a quad core i7 CPU

  http://h18000.www1.HP.com/products/QuickSpecs/13543_div/13543_div.PDF

  Kind regards

  / Thomas

• HP Elitebook 8740w: validity and windows 10 fingerprint sensor: does not

  Dear all,

  I come to you today because I have already tried many (perhaps all) of the suggested solutions posted on this forum.

  Unfortunately, I could never get a correct installation, work.

  After upgrading to windows 10 (automatic update of windows - online) the sensor of fingerprint of validity (VFS451) just stopped working.

  When you try to uninstall the VFS driver by using Device Manager, biometrics will disappear from the list of devices. After the reboot, biometrics will show the sensor of validity as if nothing happened, same version (2.3.0.0) driver and the same driver details?. Tried to manually update the uninstall third-party drivers (Lenovo) etc. without success.

  I never got to the point where Windows Hello could appear and allow me to configure the sensor.

  Hope someone has a solution, at least to uninstall the driver, as seems to be the main problem.

  Thank you very much in advance for your time and your advice.

  Olivier

  Olivier

  In my view, did not work

  Check your windows features 10 for installation of the Framework

  Update managers

  Install the HP ProtectTools Security Manager

  FTP://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63727.exe