Divide my monitor

Similar Questions

• Tecra A9 - external monitor shows scratches during the use of the computer laptop pluged.

  Hello

  I heard at least Tecras A9 product witch scratches on the external display only 3 when the laptop is pluged. When you use the laptop with the battery, the monitor works fine. they tried to divide the monitor and power cables as far as possible, but still the same problem. When you use the laptop with a non-toshiba-AC adapter, the external monitor works fine.

  Hello

  In my opinion, you should visit the nearest Toshiba authorized service provider. They can plug in your Tecra external monitors and test. If the result is the same, I am sure that you will get free AC adapter replacement.

  Do not wait and discuss the days here. Contact with them and I hope they help you.

• The mouse does not work in Windows Media Center and computer

  I have not any known cable (CTI broadband) and have no box ar place anything I can use WMC, after I put the display on the computer of long I can divide 2 monitors display (two). 1 monitor 1. TV. move WMC on TV (although) now I can't move the mouse on the screen. While WMC is in TV, the mouse still there I can't move it to the monitor to use it and watch TV at the same time. How can I watch TV and work on the computer at the same time?

  Hello

  This behavior is by design, Alt + Tab is the work around. If you think that it should be replaced, you can leave your comments on the following link: http://mymfe.microsoft.com/Windows%207/Feedback.aspx?formID=195

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Exit WMP with the HDMI help!

  OK, so ive just connected my TV to the computer and divide the monitor and the TV, but now for some reason wmp plays through hdmi but when I go to youtube and vlc it plays through my 5.1 System. How can I avoid that wmp when playing via the HDMI?

  Hello

  I suggest you check in Windows media player if the default output device has been changed to 5.1 System. The unit selected by default on the sound icon in the lower corner on the right, works as a default output device. Follow the below mentioned steps to set the default device.
  (1) start Windows Media Player on any video file
  (2) make sure that you can see the video and sound on the laptop.
  (3) the right mouse click on the area of Windows Media Player (video).
  More options-> Devices tab-> speakers select from the list of devices-> click on the properties button.
  (4) in the pop-up window modal 'properties of the speaker'-> select the audio device: => select '5.1 System.
  (5) save all windows.
  (6) close and restart Windows Media Player

• HDMI EMPREX Monitor driver

  Where can I get a software driver for my external monitor

  No driver is required for monitors of today with the exception of some monitors with special features. The only features that I can remember is to divide the screen into four screens and picture-in-picture.

  Why do you think that you need a driver?

• HP Pavilion dv6: screen divided into 4

  Please, the machine restarted when I got a BSOD whith the memory management code, after having resolved, my HP logo divided into 2 a top and a bottom, but is returned to normal, it does this for about a week and this time, he does not return to normal

  so I started at the login screen and I saw that it was 4 with 2 vertical on the right full screens and 2 screens of half verical on the left

  so I reinstalled windows, but to no avail.

  I've also updated my drivers buht

  I connected to an external monitor, it looks perfect

  Name of the OS Microsoft Windows 10 Pro

  Version 10.0.10240 Build 10240

  Another Description of the OS is not available

  Manufacturer of operating system Microsoft Corporation

  Name of system OFFICE-ACO8E6T

  System manufacturer Hewlett-Packard

  HP Pavilion dv6 Notebook PC model system

  X 64 PC system SKU C2Y45AAR is of Type #ABA

  Processor Intel Core i7-3630QM CPU @ 2.40 GHz, 2401 Mhz, 4 Lossnay 8 logical processors

  BIOS Version/Date Insyde F.26, 03/04/2013

  SMBIOS Version 2.7

  Embedded Controller Version 52.24

  UEFI BIOS mode

  Baseboard manufacturer Hewlett-Packard

  Model baseboard is not available

  Name of plinth base

  Role Mobile platform

  Start secure State

  PCR7 Configuration binding is not Possible

  Windows directory C:\Windows

  System directory C:\Windows\system32

  Boot Device \Device\HarddiskVolume2

  The local United States

  Hardware Abstraction Layer Version = "10.0.10240.16392".

  User name of OFFICE-ACO8E6T\LIVINGSTONE

  Time zone Pacific Daylight Time

  Physical memory (RAM) installed 8.00 GB

  7.89 GB total physical memory

  5.57 GB available physical memory

  9,77 GB total virtual memory

  7.42 GB available virtual memory

  Pagefile 1.88 GB of space

  Paging file C:\pagefile.sys

  Hyper-V - VM monitor Mode Extensions Yes

  Hyper-V - second level address translation Extensions Yes

  Hyper-V - virtualization enabled in Firmware Yes

  Hyper-V - data execution Protection Yes

  Hi @OPTIMISTICSTONE,

  Thank you for joining the HP Forums!

  I noticed your post on how your screen divided into 4 with your HP Pavilion dv6 Notebook. I'm happy to help you!

  What is the number of product/model of your HP Pavilion dv6? How can I find my model number, serial number or product? There are several versions, example: HP Pavilion dv6500.

  For now, maybe the steps described in this guide will help. Solve the problems when switch between views using FN + F4.

  Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I hope this guide to solve your problem!

• HP Omni 200 PC: Computer configured for HD TV as a second monitor

  I am trying to use my HD TV as a second monitor set up my TV.  My goal is to watch movies from my PC to the TV.  The Omni 200 does not have VGA or HDMI connections.  So I tried to use a 3 USB to HDMI adapter with a long (25') HDMI Cable that I connected to one of the HDMI ports on the TV for my video output.  When I tried to detect the TV as a second monitor, I got a blue screen stating my PC was a dump of data and downtime.  Maybe it's that HDMI cards drivers were not really designed to win 10.  actually, the box said it was for Win 7, 8 and Vista, but the provider told me it would work to win 10.  They insured, in fact I got the driver for Win 10 that I installed, but with my PC crashed anyway.

  I'm now considering a 3 USB to VGA instead - and using a long VGA cable to connect to my PC - it has a female connector VGA built in my opinion this solution would work.  And I would use a divider audio stereo 3.5 mm cable to connect a left and right RCA audio cable to the TV.

  Someone has an opinion on the question of whether I'd be successful before I buy these cables?  Thank you. Dan

  You are welcome.  Thank you for the additional information.

  According to the Specifications of the motherboard , there are 2 - USB 2.0 and 1.0 on your computer 5 - USB ports.  Here is a video card that can allow you to connect to your TV.  I suggest you contact the manufacturer's Technical Support to make sure it works before buy you.  This will save send back if this does not work.  I do it myself before you buy all new components.  Therefore, it is difficult to know what works today.  Technology changes so quickly.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Satellite C660 - 2 EV screen divided into three sections

  Hi, please someone can help me?

  My Satellite C660 - 2 EV has developed a display problem where the screen is divided into three equal sections or parts, with the section of the Middle standing in the middle of the screen, but the left side is now on the right side of the screen and the right side is now on the left.

  Ive searched the forums and found nothing on the Toshiba site, which just closed, but found that many sites say that it could be a hardware failure, with either the graphics card or the Ribbon that feeds on the screen that runs through the hinges.

  Can anyone plaese shed some light on this?

  > found many sites say that it could be a hardware failure, with either the graphics card or the Ribbon that feeds on the screen that runs through the hinges.

  The same question is displayed on the external screen/monitor?
  If so, this means that your graphics card chip (maybe the motherboard) is the troublemaker.

• Tecra M5: Is it possible to connect two monitors?

  Hello

  Is it possible to connect two monitors the Tecra M5? Is it possible through the port replicator, perhaps by a split of dvi output or a dvi, one on the vga monitor. I want to divide between the two monitors.

  At soon now
  Iain.

  Hello

  No, it's not possible to connect two external monitors.
  If you want to split the screen, you can use the extended desktop option.
  In display properties, you will find the option to extend my desktop on this monitor. You must select the second monitor and activate this option.

• HP w2408h: flashing monitor

  I have a HP w2408h monitor was blinking on and off problems since I started using it with my Pro 3 Surfact.  I ran across a few 2114 messages on this forum I found the following solution...

  Step 1. Unplug the power cord at the back of the screen and the wall
  Step 2. Press and hold the power button for at least a minute
  Step 3. Plug the power cable in the monitor, and then to the wall outlet (not a power bar or surge protector)
  Step 4. Press the Menu button on the monitor
  Step 5. Navigate to the factory reset option and select

  I followed these steps and, so far, my monitor no longer flashes (but his periods as it had so who will live will see)

  My question is about the third step.  Why can't I use a power bar or surge protector?  Why must it be plugged directly into the wall?

  Hi there@deanblakely,

  That the Forums are with you!  It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you want to know why we recommend that you plug directly into a wall outlet. I'm happy to help you with this.

  In response to your question, it is simply to help determine if a possible cause is insufficient. Some devices require power to perform certain tasks. If you are connected through a power strip, power this decision-making is being divided between all devices connected to this power strip.

  I hope that adequately addresses your concerns and if so, please mark this message as a solution. Bravo would be appreciated as well.

• ProBook G1 655, 23xw monitor: monitor

  Just configure the 23xw, VGA connection for my ProBook laptop monitor.  Installed HP My Display.  Want to display only on the 23xw (white laptop screen) and want a vertical split screen, but can not achieve this result.  A control of the cursor seems to randomly between the laptop and the 23xw.  Now, to the laptop keyboard (no keyboard wireless from now).  What should I do to get the laptop screen to control and divide the screen while maintaining the functionality of laptop keyboard?  Thank you.

  freid748

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your message on the monitor problems and wanted to help.

  Change which monitor is considered as 'primary', open Control Panel--> display control.  Who should see both monitors and there you can control what is the 'main '.

  However... If you set as primary externally, then it must ALWAYS be connected, otherwise, when it is not connected, you are likely to get no display on the screen of the laptop.

  There is a feature called Aero-wink, but divides basically just the office into two windows.  You have in fact two independent offices where it use to be, just two windows which, together, address the whole office.

  There is also a product of third-party called Fusion of display that will share the office, but I have not used.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Can I use 4 K monitor cut on the Thinkpad X 1 Gen1

  I bought a 4 k monitor that can divide into four full HD screens (it's on the right track), I know the 4000 Interl will not support 4K resolution but it will support 4 x 1080 p via the supplied mini port of DP?

  Well, I'm surprised to see that my X 1 carbon gen1 could actually support the resolution of 4 K 3920 * 2160.

• Is there a way to divide such ads and Add ons in a screen and automatically display search results in the other

  Original title: twomonitorsononepc

  I have two monitors on my pc is there any way for example divide ads and Add ons in a screen and automatically display search results in the other.

  or if facebook were used cat into one screen and status on the other screen please

  Hi Richard,

  What is the operating system installed on the computer?

  It seems that you need to divide the same application in several windows and place them in different monitors. Is this correct?

  Unfortunately, it is normal and you can not split the same application on two different monitors.

  Hope this information helps. Get back to us if you have more queries about Windows.

• Whenever the computer is started, two different styles of start menu appear on the screen, divided vertically from left to right.

  Original title: is this monitor or windows?

  This condition began while I was running xp sp 3.

  I worked in google earth at the time.

  I don't remember exactly what happened.

  But now, every time I start windows, two different styles of the start menu

  appear on the screen, divided vertically from left to right.

  The menu on the right can only be extended to about half of the control panel to the left.

  The menu on the left can grow to the right once the right image has been reduced.

  I tried to reset the start menu in the program settings without success.

  Anyone have any ideas?

  I hope that I was clear enough with this info.

  The article you referred to seems to apply to vista and windows 7.

  How ever, before I received your reply I had already solved the problem myself"

  I appreciate the proposed both help Lisa M and Azeez 'n'

  No further assistance is necessary.

  Thanks again.

• The screen is divided into 4

  Hi, can anyone help?
  Suddenly, my screen is divided into 4, which means there are now 4 miniature versions of everything I do. Everybody met it before and there at - it a way to back to normal?
  Thank you very much.

  Hi, Luce,.

  Right now this looks like a harware problem - probably your video card or monitor. First of all lets check to make sure that it is not not a parameter.

  1.), right click on your desktop and click Customize. Then go to display settings. In this window, set your resolution to a lower setting by moving the slider to the left.

  2.) If you have a trial office, have disconnected and reconnected the connection to the monitor. If that does nothing, try connecting a different monitor and make sure you use another cable. If this does not work, you must have a tech look at your video card.

  Thank you, Jeremy M - Support Engineer