DLR control VM issue

Similar Questions

• Satellite U400 - cannot find ATI Control Panel & issue FN

  I can always find the sofware ATI graphic control panel where I can change the settings.
  I remember I had this software installed, but I think I uninstalled and now I don't know how to get it back, because I want to have more color in my laptop.
  Someone knows how to change?

  And when I doubleclick on Intel Graphic Media Accelerator Driver for Mobile: I can't find the DEMO.
  I only find 3D and Calendar Option settings, but not VIDEO-settings :(
  Everyone please?

  Also when I click on F6 or used before F9 appears diffrient manny option on the screen of the laptop it's settings, software, choice of but now when I click nothing happends don't. Button control SOFTWARE or what I may need to do this also?

  Thanks for all the help.

  Good bye

  Hi mate

  I think you mixed with something.
  To be honest I m a bit confused.

  Initially, you asked for the ATI graphics and then you said that you have Intel Graphic Media Accelerator Driver for Mobile installed on your laptop.

  Please my friend, don t mix different graphics cards!
  Your laptop seems to be equipped with the Intel graphics card and therefore you cannot use the ATI graphics!

  I have a U400 too and I've got the Intel GPU too.
  Intel Graphic Media Accelerator Driver for Mobile, I can change the settings of gamma, brightness and contrast. That's all what you can change!

  Regarding your key issue FN;
  I think that you need to reinstall the driver or a tool.
  See the page of European driver of Toshiba for a compatible software.
  I put t know what OS you use, but if you use XP, you must reinstall the common modules. If Vista is preinstalled, reinstall the package of value added

  Good bye

• Which cluster for the placement of DLR control VM?

  Intend to have 3 groups for a design of the NSX - calculation, cluster management (Infrastructure) and Edge? Cluster Edge willl have GSE and controllers.

  Who is the cluster recommended to place the DLR VM control, and what design considerations should be made?

  Thank you

  Ousmane

  The implementation of cluster is pretty much arbitrary as long as you have sufficient resources and groups necessary distributed port.  It would be wise to keep control of the DLR VM with the edges because it is a type of edge... Or it might be a good idea to move your DLR and the cluster in your cluster of right management controller, based on the logic function... that way the edge gateway data plane loads haveore has dedicated resources.

  With the placement of the bunch, his main concern should be the availability of resources to workloads in the cluster.  Secondarily, may give priority to the proximity of heavy workloads related? Other considerations are really just aesthetics.

  It is perhaps a good idea to examine the way which you cut the clusters.  What was your purpose behind this structure? Who is?

• Satellite A660 - 1 H 5 - Albums controll panel issue

  So I got this weird problem when, sometimes I turn on the laptop the small top panel starts to play up. He begins to make sounds like I would be madly pressing volume up and down, the wireless turns off except switches mode itself on the volume goes up and down.

  When I try to click on it nothing happens. Then it stops sometimes it lasts for 10 seconds sometimes it won't stop. After that, it works quite normal throughout all the lights go out, until you press them once or twice.

  My question is:

  This software is linked?

  Is this perhaps a mechanical problem?

  Sometimes it stops when I close and open the laptop. Is - this Panel in any way related to the screen?

  On this virtual path, it is not easy to offer the exact diagnosis.
  When this happen? When Windows is loaded?
  Start Notepad in safe mode and let us know what happens.

  The fact is that these buttons are controlled by the specific utility of Toshiba.

  You can also experiment: remove preinstalled Toshiba package extra and check what happens after reboot. Later, you can install latest PPV again. PPV contains the buttons control utility.

  I put t think that this Panel is connected to the screen. Maybe there are little pressure on this Panel.
  Have you tried to clean this Panel?

• updates downloaded after a restore to a point of control-main issues

  I was told to post here for a response:

  restored to a control point. was having bad to hang on to a router. could not "Uninstall" so I restored.
  After vista came back, I downloaded updates. one was a CIP service.
  He doesn't have the first two times, then took. given market according to the instructions.
  computer turned on and acted like it was scanning or something. the black screen, white letters. then he stopped on a 'file ':! Oxc01a001d! 37482/98395 (\registry\machine\components\deriveddata...).
  stuck there for more than an hour. I pushed the button to close hard. computer is relit and recommended a system restore. I said yes, and the same thing happened. stuck on the 'message' above.
  help please. (I have Vista Home Premium 64)

  update this morning: turn off the computer this morning and turned back on - now, after 3 hours of what he's trying to "Startup Repair", it is always taken in some kind of loop. He said: it's tempting to repairs. I did not change but for the black screen.

  all the answers?

  I was told to post here for a response:

  restored to a control point. was having bad to hang on to a router. could not "Uninstall" so I restored.
  After vista came back, I downloaded updates. one was a CIP service.
  He doesn't have the first two times, then took. given market according to the instructions.

  CrystalBall © SEZ...

  Free unlimited installation and compatibility support is available for Windows Vista until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• updates downloaded after restoring to a point of control-main issues

  I was told to post here for a response:

  restored to a control point. was having bad to hang on to a router. could not "Uninstall" so I restored.
  After vista came back, I downloaded updates. one was a CIP service.
  He doesn't have the first two times, then took. given market according to the instructions.
  computer turned on and acted like it was scanning or something. the black screen, white letters. then he stopped on a 'file ':! Oxc01a001d! 37482/98395 (\registry\machine\components\deriveddata...).
  stuck there for more than an hour. I pushed the button to close hard. computer is relit and recommended a system restore. I said yes, and the same thing happened. stuck on the 'message' above.
  help please. (I have Vista Home Premium 64)

  update this morning: turn off the computer this morning and turned back on - now, after 3 hours of what he's trying to "Startup Repair", it is always taken in some kind of loop. He said: it's tempting to repairs. I did not change but for the black screen.

  all the answers?

  You say that the last problem is that the power has been cut to 1/2 way when trying to load the files to use the Startup Repair disk.

  You have caused a failure of hardware in your computer by a power failure to him.

  About the State of the disk, you're here!
  We cannot see the disk, or judge what condition it is in...

  My advice is to contact the manufacturer of your computer, if under warranty.

  If it is under warranty, contact a local and trusted computer repair shop; NOT a great string of repair shops.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can try an installation clean back to factory settings before proceeding with what precedes, but we do not know if it will work.

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  See you soon... Mick Murphy - Microsoft partner

• NSX - Ping issues between DLR and edge gateway on the network of public transport

  Hello

  I have deployed an NSX in a POC environment and have a few weird questions. I sent a distributed router (DLR) with 2 internal interfaces (related to the segments of NW app & web) and an uplink interface connected to a network of transit (192.168.10.0/29). I have also deployed a gateway of Edge services with an internal link connected to the same interface of transit (192.168.10.0/29) and an interface of uplink connected to the outside world.

  The question is, when I PuTTY on the Edge service gateway and ping interface uplink of the DLR using sound transit (192.168.10.2) network ip address, I do not get a response. The firewall is configured to accept all traffic on the DLR and the edge.

  Someone at - it ideas? Note that the DLR has been configured default gateway pointing to the IP of the gateway of the Edge on the network of public transport (as is the only North DLR connection)

  See you soon

  A rough drawing of the topology is attached. Ping fails to 192.168.10.1 to 192.168.10.2

  FYI - has proved to be a problem with the NSX 6.1.2 that attaches to 6.1.3. No KB for the issue for the time being, nor is he mentioned as being fixed at 6.1.3 in the notes but VMware engineer GSS confirmed that its fixed.

  temporary work is about to stop and start the daemon netcpa on the compute cluster hosts & edge of ESXi

  See more details on my blog http://chansblog.com/nsx-6-1-2-bug-dlr-interface-communication-issues-how-to-troubleshoot-using-net-vdr-command/http://chansblog.com/nsx-6-1-2-bug-dlr-interface-communication-issues-how-to-troubleshoot-using-net-vdr-command/

• OSPF in DLR Protocol address

  When configuring OSPF in DLR configure us the address and Protocol addresses.

  This IP address is the same as the address of the DLR VM control management.

  Protocol address: 192.168.10.3. This address is assigned to DLR control VM vNIC.

  But you have not shown where it has been configured. It is automatically assigned in the DLR VM control or you configure this address manually in control VM.

  Answer: In the user interface when you configure this address it automatically send to DLR control VM and the ESXi running of the DLR

  during the configuration of interfaces in DLR you must first configure address management for VM control.

  Answer: you don't have to configure an ip address any management, that's what I'm trying to explain in my first message, the perfect DLR work without any management ip address.

  My question was is this address mgmt control VM as a protocol address

  Answer: No, if you have decided to put the management ip address, you have different ip address of the transmission or the Protocol address.

• Crashes Thunderbird 31 @ secmod_LoadPKCS11Module and does not open. SOLVED caused by the «ActivClient» software

  details in reoprt of the accident:
  AvailablePageFile: 2309287936
  AvailablePhysicalMemory: 785412096
  AvailableVirtualMemory: 1986416640
  BIOS_Manufacturer: Hewlett-Packard
  BlockedDllList:
  BreakpadReserveAddress: 30605312
  BreakpadReserveSize: 41943040
  BuildID: 20140717165725
  CrashTime: 1406220970
  FramePoisonBase: 00000000f0de0000
  FramePoisonSize: 65536
  InstallTime: 1406135530
  ProductID: {3550f703-e582-4d05-9a08-453d09bdfdc6}
  ProductName: Thunderbird
  ReleaseChannel: press release
  SecondsSinceLastCrash: 1352
  StartupTime: 1406220970
  SystemMemoryUsePercentage: 62
  Ramjet: 1
  TotalPageFile: 4226400256
  TotalPhysicalMemory: 2113200128
  TotalVirtualMemory: 2147352576
  URL:
  Seller:
  Version: 31.0

  This report also contains technical information about the State of the application when it crashed.

  > How much time your staff control these issues?

  Maybe that's where the misunderstanding arises. We do not have a staff. Thunderbird is open source, everyone here is a volunteer support overworked on their own time and dime. Yes, I'm a moderator. But I have no authority, nor the additional powers nor the additional tasks and responsibilities. I have this up to allow me to do special things in the forums.

  Thank you for hanging there with Thunderbird. Feel free to hang around and help other Thunderbird users. We welcome your contributions to https://support.mozilla.org/en-US/questions/thunderbird small or large.

• 10.11.5 OSX creates problem safari @ blogger

  Since the recent update OSX 10.11.5, I am unable to use Safari 9.1.1 to create or modify messages on my blog on Blogger. The cursor does not appear or there is a lag in time when you use controls - small issues that nevertheless make the impossible experience blogging. However, if I use Chrome, I have no problem whatsoever. I do understand that Blogger and chromium are products of Google, but Safari is my default browser and these problems are new for me since the recent update of the OSX software. I just think that Apple should know.

  Apple is not regularly monitor the discussions. These are mostly a user in discussions.

  Send feedback to Apple. They will not respond, but at least know that there is a problem. If enough people send feedback, it can become the problem solved as soon as possible.

  Your comments

  Or you can use your Apple ID to register on this site and go the Apple BugReporter. Allegedly, you will get a response if you submit your comments.

  Comments via Apple Developer

• I have more option under 'File' in the main menu to open a new window.

  In the past (recent past), I was able to open a new Firefox window licking on file, then there was an option to open a new window (session) of Firefox. At one point I'm not sure that option is gone. No one knows why or how I can fix or repair?
  I would appreciate the help because I miss a lot of the functionality!

  If you don't see the menu bar with the menu file then see what happened to the file, edit and view menus?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).

  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  You can also try "Reset toolbars and controls" on issues to troubleshoot Firefox in Safe Mode start window

• Satellite A500 keyboard/mouse gel pad - slider and type the inadmissible spaces

  Problem with my new laptop, several times, that the cursor has become inadmissible for the mouse pad, and everything that is on the screen does not recognize me typing on the keyboard. This seems to happen while I'm using the mouse pad.

  I got the mouse pad power button thinking it may have been moved, but it does not affect the lack of reaction.

  Could I perform certain functions I don't know? Any other ideas?

  It is not easy to understand what the problem is here and try it all, it is possible to control these issues.
  With original preinstalled OS touchpad should work except that it has disabled with FN + F9 key combination or small button.

  This with typing is also a bit mysterious to me. If you use multiple windows (several different applications) be sure that you try to type when the window is active.

  Please don't get me wrong but the best thing you can do is to ask for help somewhere. Best address is Toshiba service. They can put the mobile on the desktop and check what is happening exactly.
  Here on this virtual world, I can just say: If you want to test on the right way to reinstall OS using the HARD drive recovery image (factory State) and test the functionality again. By default, everything should work well. If this is not the case, there must be a hardware failure.

• Different results from the the DLL source code

  Hi all

  I'm new to this forum and also to labview so understandable...

  Then, I got a source project with many under vi of that graphic plots of excel files. I also got the exe after generation.

  The problem is, if I try to compile this project again, the exe gives me different results than what I already have. They should be the same, because I does no update in the source code.

  Can someone explain this behavior? I don't know anything about how it has been made because the guy who create this left the office... I need to make a few updates, but first of all, I have to build corectly.

  Thank you

  Have you compared the date of the exe file with the date of the source code? Are you absolutely sure that no changes have been made to the source code after the build? The construction specifications are part of the project. Unless you changed something there, builds should be the same.

  You have the source code control? Issues like this should not be a if you make and use wisely.

• Hotmail messages en

  Saludos

  Tengo a problema con los correos electronicos what generan desde NI Forums, sellaman "buscar en the comunidad OR discussion forums policy" y estan saturando the tray of entrada mi correo personal, quisera that alguien me diga if exist una manera control the issue of esos correos desde forums of nor.

  Photos grateful Quedo

  Hola,

  Can Quebec sus equally put suscripciones en > config y Favoritos.

  You can change your preferences in my settings > subscriptions & bookmarks.

  Saludos cordial

  Abel Souza

  Engineering applications

  OR Brazil

• Impossible to use the webcam with Skype, but it is not detected

  webcam problems

  built in cam, but when I try to Skype it says it is not detected?... don't know if it's my Skype or my comp sumone... does know?

  A moderator has moved this thread to Windows for the hardware and drivers Forum

  Hi, Twyla,

  Is everything up to date?  Drivers, etc...?

  Open Windows Event Viewer. Access custom views-> administrative events. Search for recent error messages. Click on all errors and view the details here if they time things fail.

  Try this Fixit M.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Controls graphics issues

  http://community.Skype.com/T5/idea-garage/TheUberOverLord-video-issues-checks/TD-p/156710