DLR ping fails

Similar Questions

• Once a day, I lose all network connectivity on my Windows XP SP3 laptop. When I try to ping something I get this error: "PING failed, error 1450' code"

  Hello, those in about 3 days, I lose network connectivity on my laptop with Windows XP SP3. When I ping no matter what page of the console I get the following error message: show PING failed, error code 1450. I tried to use the option of repair in my area, but it did not help. Computer restart resolves the problem, but I'd like to avoid doing. What should I do to solve the problem?

  original title: loss of network connectivity

  Since this happen in two different ISP, try to reset your modem or router and also contact your ISP support. Some ISPS will set a rule and limitation of their user, but in your case, discuss it with your ISP, or contact technical support for your PC manufacturer.

• Successful lease IP, but ping failed and comms

  I run a network of 2 PC's at home. The two PC is running XP. I had successfully this network running with ICS for about 1 year. Due to performance issues, I decided to format the PC host. No hardware changes were made, but I load the updated drivers for all devices (including NIC - Intel Pro 100) on the formatted PC. Since the charging I can't do a ping between 2 PCs. The loop back Ping works fine on both PCs. What is really disconcerting is the fact that by using the ipconfig/all command, I see that the client PC rents successfully a new IP address of the host, but still there is no communication and ping fails. I ran several times in the Configuration Wizard from the network on both machines using different computer names (and even change the name of working group) of force to renew the connection. Whenever I see that the customer is to successfully get a new host IP lease, but always communication and ping is not available. I use AVG free edition and Windows Firewall. I also disabled the Windows Firewall on both machines, but it made no difference. I tried to put the customer on a fixed IP (192.168.0.2), but that also doesn't solve the problem. I am out, please help.

  Thanks for the reply, but the problem was resolved last night. I uninstalled the Intel driver for the NETWORK card and reinstalled an old version that I had on the disk. This instantly solved the problem, so I can assume there is a problem with the latest Intel driver. Thanks again.

• fqdn ping fails after recovery from sleep mode

  client system is win7 64 bit

  Server DSN is isc bind 9.7 works on win 7 64 bit

  local system of fqdn ping fails after recovery from sleep mode.

  I do not think that the ping never hits the network.

  Nslookup of full domain name or name of the system only exists.

  the system name ping only succeeds.

  then after ipconfig/release, ipconfig / renew, successor to ping the domain name full local system.

  someone at - it thoughts or ideas?

  Hello

  From the description of the problem, it seems that your computer is on a domain. I suggest you post the same question on the link below. The link given below is link TechNet Support for Windows 7. The question facing you is best for TechNet forums.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Feel free to write us if you have any other issues related to Windows.

• Each second ping fails

  Hi all

  I have a little test lan with the installation of 2611xm for ipsec vpn.

  On each fe port I have a laptop plugged directly inside, int is assigned by dhcp, and outside at this stage is static.

  I use 3rd party ipsec client program shrewsoft customer vpn.

  The tunnel rises and its is established with many packages of encryption and decryption.

  As mentioned in the title, each second ping fails in both directions from client to client, router 100% inside the cell phone pings and fails to address assigned 192.168.1.10 to the client ipsec "remote".

  Here is my config and below that, I think that highlights where might be the cause, the arp entry address assigned ipsec is incomplete.

  An ipconfig/all on the "remote" client shows a mac address of the int as aaaa.aaaa.aa00 tunnel.

  Kind regards

  Mitchell

  config:

  Router #show run
  Building configuration...

  Current configuration: 2139 bytes
  !
  version 12.3
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  router host name
  !
  boot-start-marker
  boot system flash: c2600-ik9s - mz.123 - 6f.bin
  boot-end-marker
  !
  !
  no location network-clock-participate 1
  No network-clock-participate wic 0
  No aaa new-model
  IP subnet zero
  IP cef
  !
  !
  no ip domain search
  IP domain name vpn.changeme.com
  IP-server names 4.2.2.2
  DHCP excluded-address IP 192.168.0.0 192.168.0.9
  !
  internal IP dhcp pool
  network 192.168.0.0 255.255.255.0
  default router 192.168.0.1
  4.2.2.2 DNS server
  domain vpn.changeme.com
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  Keyring cryptographic remote_user
  pre-shared key address 0.0.0.0 0.0.0.0 key xxxx
  !
  crypto ISAKMP policy 1
  BA aes 256
  preshared authentication
  Group 5
  ISAKMP crypto nat keepalive 5
  crypto ISAKMP client configuration address pool local ipsec
  !
  ISAKMP crypto client configuration group remote_user_group
  key xxxx
  outdoor pool
  ISAKMP crypto profile remote_user
  Keychain remote_user
  remote_user_group group identity match
  !
  !
  Crypto ipsec transform-set esp - aes 256 esp-sha-hmac DYN_TFS
  !
  crypto dynamic-map DYN_MAP 1
  game of transformation-DYN_TFS
  REMOTE_USER Set isakmp-profile
  !
  !
  launch of the card client configuration address card crypto
  card crypto card client configuration address respond
  map 1-isakmp ipsec dynamic crypto map DYN_MAP discover
  !
  !
  !
  !
  interface FastEthernet0/0
  ETHERNET INTERNAL description
  the IP 192.168.0.1 255.255.255.0
  automatic duplex
  automatic speed
  !
  interface Serial0/0
  no ip address
  Shutdown
  no fair queue
  !
  interface FastEthernet0/1
  WAN ETHERNET description
  10.1.1.1 IP address 255.255.255.0
  automatic duplex
  automatic speed
  No cdp enable
  card crypto map
  !
  interface Serial0/1
  no ip address
  Shutdown
  !
  IPSec local pool 192.168.1.10 IP 192.168.1.100
  IP http server
  no ip http secure server
  IP classless
  Driving IP profile
  IP route 192.168.1.0 255.255.255.0 FastEthernet0/1
  !
  !
  access list 101 ip enable any 192.168.0.0 0.0.0.255
  !
  !
  !
  !
  !
  !
  !
  !
  Line con 0
  Synchronous recording
  line to 0
  line vty 0 4
  privilege level 15
  opening of session
  transport telnet entry
  !
  !
  !
  end

  ARP on the router #show
  Protocol of age (min) address Addr Type Interface equipment
  Internet 10.1.1.2 0 001b.d338.0bab ARPA FastEthernet0/1
  Internet 10.1.1.1 - 0017.5993.a6c1 ARPA FastEthernet0/1
  Internet 192.168.1.10 0 incomplete ARPA
  Internet 192.168.0.1 - 0017.5993.a6c0 ARPA FastEthernet0/0
  Internet 192.168.0.2 1 001b.d338.0b7c ARPA FastEthernet0/0

  The "Internet 192.168.1.10 ARPA incomplete 0 " output does not seem right. "."

  The router should not have even this particular ARP entry because there is no router with the 192.168.1.0/24 subnet interface, so there is no reason for the router to ARP for this subnet unless you connect a PC with the 192.168.1.10 ip address previously. I suggest that you turn off the router ARP entry "clear arp.

  For the following path statement: ip route 192.168.1.0 255.255.255.0 FastEthernet0/1, I would like to change the next hop of the fa0/1 to the actual ip address of the next hop router (or your ip address of PC if you connect directly a PC to the router interface fa0/1), that is to say:

  IP route 192.168.1.0 255.255.255.0 10.1.1.x

  Hope that helps.

• nslookup works, but ping fails by hostname (works of intellectual property). IE cannot display this webpage. Help, please!

  Cannot access Internet on my laptop with Windows XP SP2 installed; uninstalled firewall; Microsoft Security Essentials (AV) installed

  ipconfig/all shows a 192.168.x.x ip address to my ethernet card.

  TCP/IP properties are set to "Obtain an IP address automatically" and "Obtain DNS server address automatically."

  I am able to search names and ping by ip address but cannot ping by hostname. When I try to navigate through a Web site, it displays the message "Waiting for http://xxx.xxx.xxx ' in the status bar, but fails to load the Web page.

  I tried a few sites by their IP with the browser, for example 212.58.244.143, and IE was able to load the Web page (without any objects of course requiring name resolution).

  Able to ping loopback (127.0.0.1) as well as the computer by its name (which resolves to the ip address is assigned to the).

  ARP - a shows the entrance to the default gateway. Able to ping.

  I did ipconfig/flushdns and / registerdns without effect.

  Even with net stop dnscache and net start dnscache.

  Manually reset TCP/IP too by following the instructions here.

  Also used "netsh winsock reset catalog" according to the guideline here.

  Running out of ideas here... could someone please advise what to do? Or what additional information it would take to solve this problem?

  I met the same problem on win7. I also tried each solusion what you tried.

  In the end, I reinstalled the tcp/ip stack and solved this problem. Try the following steps:

  1 remove

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock
  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock2

  2 reset

  3. right click on the network connection and then click Properties. Reinstall the protocols of the disc. The location is 'C:\Windows\inf '. Choose the «ipv4...» "and"ipv6 ".

  4 reboot

  Everything is ok.

  Good luck!

• DNS Broke - nslookup successful but Ping fails

  Hello

  I'm working on an old client computer that is running Windows XP SP2.

  The computer is unable to connect because of a sort of DNS issue, so it appears.

  See, very strange:

  C:\Documents and c > nslookup digg.com

  Server: quarter - pri.sys.gtei .net

  Address: 4.2.2.1

  Non-authoritative answer:

  Name: digg.com

  Address: 64.191.203.30

  C:\Documents and c > ping 64.191.203.30

  Ping 64.191.203.30 with 32 bytes of data:

  Reply from 64.191.203.30: bytes = 32 time = 83ms TTL = 242

  Reply from 64.191.203.30: bytes = 32 time = 81ms TTL = 242

  Reply from 64.191.203.30: bytes = 32 time = 82ms TTL = 242

  Reply from 64.191.203.30: bytes = 32 time = 86ms TTL = 242

  Ping statistics for 64.191.203.30:

  Packets: Sent = 4, received = 4, lost = 0 (0% loss),

  Time approximate round trip in milli-seconds:

  Minimum = 81ms, Maximum = 86ms, average = 83ms

  C:\Documents and c > ping digg.com

  Ping request could not find host digg.com. Please check the name and try again.

  C:\Documents and c >

  C:\Documents and c > nslookup digg.com

  Server: quarter - pri.sys.gtei .net

  Address: 4.2.2.1

  
  

  Non-authoritative answer:

  Name: digg.com

  Address: 64.191.203.30

  
  

  
  

  C:\Documents and c > ping 64.191.203.30

  
  

  Ping 64.191.203.30 with 32 bytes of data:

  
  

  Reply from 64.191.203.30: bytes = 32 time = 83ms TTL = 242

  Reply from 64.191.203.30: bytes = 32 time = 81ms TTL = 242

  Reply from 64.191.203.30: bytes = 32 time = 82ms TTL = 242

  Reply from 64.191.203.30: bytes = 32 time = 86ms TTL = 242

  
  

  Ping statistics for 64.191.203.30:

  Packets: Sent = 4, received = 4, lost = 0 (0% loss),

  Time approximate round trip in milli-seconds:

  Minimum = 81ms, Maximum = 86ms, average = 83ms

  
  

  C:\Documents and c > ping digg.com

  Ping request could not find host digg.com. Please check the name and try again.

  
  

  C:\Documents and c >

  So, as you can see the GET from the computer to the correct IP address for any domain using nslookup, but trying to ping or access any domain name instantly fails. :(

  Tried to run winsockxpfix, but that made no difference.

  Also, I tried using the service DNS, open dns but same problem.

  The computer is connected to my knowledge as work network. 7 other computers and two xbox 360 s on the network even get very well correct dns data. So it's fair to this computer.

  Even tried to install BIND 9 on the PC and the same problem. :(

  Thanks for the help,

  Will be

  God Bless America

  I fixed it by managing to install SP3. Just so install SP3 for XP fixed the problem. : D

  And Yes Ben, I tried that too. At a rating of 1. Thank you for trying to help though.

  God Bless America

• Test the IP (Ping failed)

  I want to develop an application from server to client on the Playbook.

  First thing, I'm getting is ping the Playbook of my office and vice versa.

  The Playbook seems to be able to ping from the desktop.  When I try to ping my Playbook of my desktop (Win7), it fails.

  I use the IP address found on the Playbook under Wifi settings.

  We know what I am doing wrong?  I have looked around and you haven't seen anything on this Board or Google which addresses this problem.

  Thank you.

  Thanks for responding, Mark.

  I meant with my progress so far yesterday.

  In my router settings was a checkbox for the isolation that allows anyone to see the devices on wifi.  Unchecking it now allows me to ping devices.

  I don't know what Mark refers to since I can now ping the Playbook as well as my laptop and iPod touch.

  Catch face!

• Internet IP Ping failed

  Hi, I received a windows update, but since it is installed I don't have an internet connection. I ran a diagnosis and the internet IP Ping couldn't whatever that means and how to fix? I tried many suggestions on the forum but nothing helps. The problem is not with the router I can get a connection with another computer someone at - it suggestions please.

  Hello

  Perform the steps in the article, and check whether the problem is resolved or not.

  "Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer

  Hope that helps.

• Ping fails intermittently but nslookup is fine

  Hello

  I enabled DNS and AD Windows 2008 r2 roles. I have Windows 7 and Windows 8 machines in the LAN and two of them having intermittent outages to resolve hosts using domain FULL, LAN hosts can be reached using the IP address and NSLOOKUP works fine too... It's just PING using a FULL domain name is not resolved. Appreciate any help with this issue.
  Here "ipconfig/all" watch for an Ethernet connection... (I disabled IPv6 on the local PC under control-> networks-> Ethernet properties panel)
  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  IPv4 address...: 10.0.10.199 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: 15 January 2013 14:56:57

  End of the lease...: February 3, 2013 17:26:18

  ... Default gateway. : 10.0.10.1.

  DHCP server...: 10.0.10.1.

  DNS servers...: 10.0.10.50

  10.0.10.1

  NetBIOS over TCP/IP...: enabled
  BTW, using workaround so far is, run ipconfig / renew twice and ping with FQDN works very well yet.
  Thank you
  Kishore

  Hello

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb310558.aspx

• Ping failed with more than 76 bytes on Codian 4510

  Hi all

  Some troubleshooting problem I stumbled across what seems to be a strange behavior with the Codian 4510. In two separate environments, I realized that ping the device with a packet size of more than 76 bytes of data results in delays as shown below. Anyone know why this happens?

  localhost: ~ jason$ ping s 76 10.2.0.208

  PING 10.2.0.208 (10.2.0.208): 76 data bytes

  84 bytes from 10.2.0.208: icmp_seq = 0 ttl = 254 times = 3,642 ms

  84 bytes from 10.2.0.208: icmp_seq = 1 ttl = 254 = ms 3,579 times

  ^ C

  -10.2.0.208 - ping statistics

  2 packets transmitted, 2 packets received, 0.0% packet loss

  round-trip min/avg/max/stddev = 3.579/3.611/3.642/0.031 ms

  localhost: ~ jason$ ping s 77 10.2.0.208

  PING 10.2.0.208 (10.2.0.208): 77 data bytes

  Request timeout for icmp_seq 0

  Timeout for icmp_seq request 1

  ^ C

  -10.2.0.208 - ping statistics

  3 packets transmitted, 0 packets received, loss of packets of 100.0%

  This is normal, to avoid problems due to the too large ICMP packets.

• NSX - Ping issues between DLR and edge gateway on the network of public transport

  Hello

  I have deployed an NSX in a POC environment and have a few weird questions. I sent a distributed router (DLR) with 2 internal interfaces (related to the segments of NW app & web) and an uplink interface connected to a network of transit (192.168.10.0/29). I have also deployed a gateway of Edge services with an internal link connected to the same interface of transit (192.168.10.0/29) and an interface of uplink connected to the outside world.

  The question is, when I PuTTY on the Edge service gateway and ping interface uplink of the DLR using sound transit (192.168.10.2) network ip address, I do not get a response. The firewall is configured to accept all traffic on the DLR and the edge.

  Someone at - it ideas? Note that the DLR has been configured default gateway pointing to the IP of the gateway of the Edge on the network of public transport (as is the only North DLR connection)

  See you soon

  A rough drawing of the topology is attached. Ping fails to 192.168.10.1 to 192.168.10.2

  FYI - has proved to be a problem with the NSX 6.1.2 that attaches to 6.1.3. No KB for the issue for the time being, nor is he mentioned as being fixed at 6.1.3 in the notes but VMware engineer GSS confirmed that its fixed.

  temporary work is about to stop and start the daemon netcpa on the compute cluster hosts & edge of ESXi

  See more details on my blog http://chansblog.com/nsx-6-1-2-bug-dlr-interface-communication-issues-how-to-troubleshoot-using-net-vdr-command/http://chansblog.com/nsx-6-1-2-bug-dlr-interface-communication-issues-how-to-troubleshoot-using-net-vdr-command/

• Impossible to ping by hostname

  Original title: "network Bug.

  I have a home network of 2 laptops and a desktop computer.  They are all on the same network and the working group. I followed these steps.

  1 ping the loopback address to verify that TCP/IP is installed and configured correctly on the local computer. To do this, type the following command:

  Ping 127.0.0.1

  If the loopback test fails, the IP stack is not responding. This problem may occur if one or more of the following conditions are true:

  the o TCP drivers are corrupted.

  o the network adapter does not work.

  o another service is interfering with IP.

  2. ping the IP address of the local computer to verify that the computer was successfully added to the network. If the routing table is correct, this procedure transfers just the packet to the loopback address 127.0.0.1. To do this, type the following command:

  IP address of host local ping

  If the loopback test succeeds but you cannot ping the local IP address, there may be a problem with the routing table or the network adapter driver.

  3. ping the IP address of the default gateway to verify that the default gateway is functioning and that you can communicate with a local host on the local network. To do this, type the following command:

  default gateway ping IP address

  If the ping fails, you have a problem with the network adapter, the router device or gateway, cabling, or other connectivity equipment.

  4. ping the IP address of a remote host to verify that you can communicate through a router. To do this, type the following command:

  the IP address of the host remote ping

  If the ping command fails, the remote host may not be responding, or there may be a problem with the hardware of network between computers. To exclude a host remote does not respond, use Ping again to a different remote host.

  5. ping the host name of a remote host to verify that you can resolve a remote host name. To do this, type the following command:

  Ping the host name of the remote host.

  got it all except for the ping by host name.  Help...

  I had this same problem and finally resolved.  In my router config page, I noticed that there is an entry "local domain name.  That has been fixed to "Belkin" and the help text says that having a value is optional, but there is no reason to change this value, so I've always left alone.

  I noticed that when I put in the host name, it adds ".» Belkin"for the name and then say he could not find the host.  So I made this entry blank.  Reboot the router.  Immediately, my hostname looks worked.

  As suspects, it also allowed me to access other computers in my workgroup.  They appeared, but when I would try to use them, I received the error "network location is not found."  Once I removed the Domain Local name, everything worked fine.

• Connected to the ASA via the "VPN Client" software, but cannot ping devices.

  I have a network that looks like this:

  

  I successfully connected inside the ASA via a software "Client VPN" tunnel network and got an IP address of 10.45.99.100/16.

  I am trying to ping the 10.45.99.100 outside 10.45.7.2, but the ping fails (request timed out).

  On the SAA, including the "logging console notifications" value, I notice the following message is displayed:

  "% 305013-5-ASA: rules asymmetrical NAT matched for flows forward and backward; "Connection for icmp src, dst outside: 10.45.99.100 inside: 10.45.7.2 (type 8, code 0) rejected due to the failure of reverse path of NAT.

  I have a vague feeling that I'm missing a NAT rule of course, but not all. What did I miss?

  Here is my configuration of ASA: http://pastebin.com/raw.php?i=ad6p1Zac

  Hello

  You seem to have a configured ACL NAT0 but is not actually in use with a command "nat"

  You would probably need

  NAT (inside) 0-list of access inside_nat0_outside

  He must manage the NAT0

  Personally, I would avoid using large subnets/networks. You probably won't ever have host behind ASA who would fill / 16 subnet mask.

  I would also keep the pool VPN as a separate network from LANs behind ASA. The LAN 10.45.0.0/16 and 10.45.99.100 - 200 are on the same network.

  -Jouni

• Data load rule for BefImport script getting failed due to the error Code ORA-01858

  Hello guys,.

  I'm trying to load some data from the views created in EBS to HFM using FDMEE with the help of the BefImport Script. To do this, I wrote script below:

  _________________________________________________________________________________________________________________________________________________

  import java.sql SQL

  import sys

  batchName = "Batch_" + str (fdmContext ["LOCNAME"])

  insertStmt = «»

  stmtRS = «»

  If (fdmContext ["LOCNAME"] is "LOC_OIA_FA_CORP1"):

  "insertStmt = '"

  INSERT INTO AIF_OPEN_INTERFACE)

  BATCH_NAME

  YEAR

  PERIOD

  PERIOD_NUM

  CURRENCY

  COL04

  COL05

  COL07

  COL08

  COL09

  COL10

  COL11

  QUANTITY

  ) (VALUES

  ?

  ,?

  ,?

  ,?

  ,?

  ,?

  ,?

  ,?

  ,?

  ,?

  ,?

  ,?

  ,?

  )

  """

  sourceConn = sql. DriverManager.getConnection ("jdbc:oracle:thin:@ebsr12dbcnvgl.abc.com:1541:avc", "pppp", "nnnnn");

  # Limiting the number of rows to 5 during the test runs.

  selectStmt = 'SELECT TEMP_VIEW. PERIOD_YEAR, TEMP_VIEW. PERIOD_NAME, TEMP_VIEW. PERIOD_NUM, TEMP_VIEW. CURRENCY_CODE, TEMP_VIEW. SEGMENT1, TEMP_VIEW. SEGMENT2, CONCAT (TEMP_VIEW. SEGMENT3, TEMP_VIEW. "SEGMENT4) AS SEGMENTX, TEMP_VIEW.SEGMENT5, TEMP_VIEW.SEGMENT6, TEMP_VIEW.SEGMENT7, TEMP_VIEW.SEGMENT8, TEMP_VIEW.NETBAL FROM TEMP_VIEW WHERE THE QUAD IS NOT NULL.

  stmt = sourceConn.prepareStatement (selectStmt)

  stmtRS = stmt.executeQuery)

  batchName = "Batch_" + str (fdmContext ["LOCNAME"])

  While (stmtRS.Next ()):

  params = [batchName, stmtRS.getString("PERIOD_YEAR"),

  stmtRS.getString ("PERIOD_NAME"),

  stmtRS.getString ("PERIOD_NUM"),

  stmtRS.getString ("CURRENCY_CODE"),

  stmtRS.getString ("SEGMENT1"),

  stmtRS.getString ("SEGMENT2"),

  stmtRS.getString ("SEGMENTX"),

  stmtRS.getString ("SEGMENT5"),

  stmtRS.getString ("SEGMENT6"),

  stmtRS.getString ("SEGMENT7"),

  stmtRS.getString ("SEGMENT8"),

  stmtRS.getBigDecimal ("NETBAL")]

  fdmAPI.executeDML (insertStmt, params, False)

  fdmAPI.commitTransaction)

  stmtRS.close)

  stmt. Close()

  sourceConn.close)

  _________________________________________________________________________________________________________________________________________________

  But my DLR gets failed. When I checked the ODI journal for this, I found that it is said: stmtRS = stmt.executeQuery () and display and error code problem:

  java.sql.SQLDataException: java.sql.SQLDataException: ORA - 01858: a nonnumeric character where waiting a digital.

  What is the problem? Kindly help.

  Thank you

  Concerning

  Nishant

  Nishant

  small Question... What version you use.  the latest Patch is now universal data adapter that allows for a direct import of the tables and views without the need to use the Interface open to scene data table

  If you're not on current patch.100 then you should look at the data types for the OpenInterface table... you can see the number.  I guess it's the column YEAR or PERIOD_NUM giving you seizures

  If you run your code in Eclipse before you deploy I'd print our your insertStmt SQL and then try to run in SQLDeveloper.

  

  Hope this helps

  Wayne