DMA2100, no picture on composite connection

Similar Questions

• No video picture when the connection by Satellite 2410 to TV

  I have a 2410 satellite that has taken video - RCA-type.
  But when I connect to video in on my TV there is no picture but its OK use the headphone jack.
  Can someone help me please

  Hello

  Have you checked if you use the correct NTSC / PAL settings?
  Check it!

  In addition, I would recommend checking if the right channel was selected on the TV.

• I have announced a new drive hard into my laptop so i that no picture can now connect you and try to get my pictures back

  I have announced a new drive hard into my laptop but I lost my pictures is possible that I can recover by logging into the windows photo gallery

  When you replaced the hard drive, everything that was in the old man disappeared. Of course, because he's gone.

  Reinstall your photos from the backup that you made before you replaced the hard drive. Oh, you save all of your date? Oops!

• DMA2100 and Windows 7 (cannot connect)

  Hello

  I am using the extender with Vista for a while, until Vista has got so confused, the Media Center stuff 'fell down', so I decided to reformat and use Windows 7 instead. Unfortunately, I had not a copy of 32-bit, so I went with 64 bit (my problem is not related to this fact, I hope!).

  I went through the Setup program; stuck in the 8-digit key, and he went through all the steps except the last (the link stage) - which he remained for some time until what it has expired. I googled a bit; I tried to edit group policy to allow and there is no problem with a firewall. Even, I went to the Microsoft site and downloaded their updated 64-bit (not quite sure what it was for, but he gave a go - no change).

  Hoping someone here can help me to understand, thanks!

  Well, her could not solve the problem, but I worked around it by putting in place a bridged Vista virtual machine, with a symbolic link into media stocks.

  Now, surprisingly, works great!

  Thanks anyway.

• When I connect my BB "BOLD" to my PC, I can't transfer or send pictures. I connect as I'm driving and he says to try again. I could do it before I downloaded Real Player. That is what it is? anyone?

  All of the suggestions.

  Hello

  ·         What software do you use to transfer files?

  ·         The device is recognized by the computer?

  ·         What is the exact error message?

  ·         You are able to transfer other media files?

  Please provide more information to help you best.

• Add or remove pictures of composition slideshow in Adobe Muse

  Hello

  I was just curious if in writing in the muse of Adobe browser, you can add or remove an image from a slide show of Compostion?

  I had a quick glance and looks like he wants to replace the slide show complete with a single image?  Is it possible to give the client access to the changes of the images in the slide show?

  See you soon

  Glenn

  Yes, you can change the image in the slideshow via IBE.

  http://www.Adobe.com/inspire/2013/12/in-browser-editing-Muse.html

  Adobe help Muse | In the browser edition of Web sites using third-party providers of hosting services

  Thank you

  Sanjit

• NB305 - connect to a TV composite (RCA)

  Is it possible to connect a TV that has composite connections RCA and SCART only Monitoring NB-305. If this is what would be the best way to do this?

  I found several VGA - RGB cables on the internet (which also specify that you can use to connect to the RCA (red/yellow/white) jacks. However, I also noticed that a lot of people say that these cables don't work unless your PC has 'TV-OUT '. I'm a little confused as to if possible, can someone offer any advice.

  I would like to be able to connect the Netbook to the TV and use the TV as a monitor, as well as the output for the sound (as the sound level of the Netbook is very poor).

  Hi v *.

  Theoretically, it is possible to use a RCA VGA adapter to connect NB305 to the TV. In my opinion you shouldn't t buy a very good cable market and from my own experience, I can recommend a high quality at a specialist dealer (Audio/HiFi store) cable.

  Additionally, make sure that you use the correct settings for TV (NTSC or PAL). Also check the resolution of the screen and display refresh rate to get a good connection.

  So, in other words, it of possible to make such a link.

• laptop loses picture when the hdmi cables are connected

  laptop loses picture when I connect the laptop HDMI cable to HD TV

  Help, please.

  Thank you.

  Try pressing your "fn + f5" together until both monitors are on. The combination of keys is to pass between the monitors. In your case, the first time, it should turn on the laptop screen and turns off the second monitor, the second must turn them both on. On some computers, it's the f4 key and on dell is the f8 key, the key is usually the image from one monitor to this topic.

• Take pictures when you are connected to the computer

  I have a Sony dsc-hx5v. I cover basketball and want to be able to take pictures while I'm connected to my computer via USB. Otherwise, the process of unplugging and plug makes the system must update itself, blah blah blah.

  Is it possible to take pictures while only connected via USB and photos automatically fill in PMB?

  
  

• Qosmio F10 - how to connect VCR to the Qosmio

  I'm trying to connect my analog VCR / my laptop to save some old tapes.

  Follow the instructions exactly as detailed in the user guide, but I can't get a picture. Used both Svideo composite without joy!

  Someone had the same problem and anyone know a fix?

  Thank you in advance.

  CT

  Hi Anthony,.

  I spent a futile a few hours by train to do it with my Satellite A30 until I have realized that the adapter SCART I was using was a single input device, so I wasn't getting any signal from the VCR to my laptop. I changed the adapter SCART to a version switchable and made sure that it passed to the "output" mode and it worked very well.

  I never managed to get a picture of S-video in color, black and white only. I gave up in the end and returned to composite connections that worked perfectly.

  HTH

• site long to connect. Photo and graphics rendering Win 8 64

  Win 8.0 64, i7, 12 GB, Nvidia 640 ram. New computer. Clean install of 21.0 Fox F. synchronize with FF existing on the computer laptop w / Win XP Pro. F Fox on laptop works very well. Web 27.6 d/l 5.2 u/l access speeds. On the new medium of computer 16sec to connect with any web site, and around the same time of offset for the rendering of pictures etc after connection to the site. I have reset F Fox. Fox started f without any add on etc. Still the same problem.

  Hello

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• NB250 connected to Regza TV - no sound

  Connected my NB250 to toshiba Regza TV via VGA VGA and picture OK.
  Connected headset cable pc audio in TV but still no sound on the TV.

  Can help you. Thank you

  > Headphone connected on cable audio pc Jack on TV but still no sound on the TV.
  I think that there is a problem, it is PC audio port enabled in the settings of the TV?
  Have you checked all the settings of the TV?

  Is that VGA port does not provide the audio stream and therefore only the photo is visible on TV.

• Tecra 8000 composite video output

  I'm running the video output from my tecra 8000 via yellow composite video connector at the rear of the unit. I thought it was as simple as pluging in both sides of a RCA (one end to the video input of a video recorder) Jack and the other end into the video Tecra.
  I get NOTHING on the screen. What I am doing wrong?

  Thanks in advance

  Hello

  normally, you have to pass the video signal in the composite connection.
  For this (on newer models at least) by pressing FN + F5.
  This combination toggles the 'next' display/device combination
  If the videodevice primary and standard is the internal TFT, pressing FN + F5 once going to signal internal both TFT and RGB (monitor connector). Next time you press it, it will only in RGB, and next time, again, it should go to the TV output (composite).

  Try it!

  BR
  Tom

• Just upgrade to 50GB, now how all of my pictures and videos on my Mac?

  I just upgrade my iCloud to 50GB plan.

  I want to be able to all back up on my iPhone and iPad so if something always happens to each device, everything can be recovered later. Also, I want to synchronize all my photos and videos, and downloaded pictures from my iPhone or iPad to the cloud, so I can't see that on my Mac and possibly transfer to my Mac to an external hard drive and delete them from the cloud. I'm not interested in putting all of my pictures and videos on all of my devices using photo stream. I transferred photos/videos on my Mac using the Image Capture on the Mac.

  1. under settings > iCloud > Photos I have iCloud, photo sharing power in order to make albums and share them with people. I have currently iCloud photo library on my iPhone is turned off. I turned it on and it says it has been downloaded 448 photos, although I have only 256 photos? What else is the download? It downloads photos from shared albums?

  2. to get what I want, there are other settings I need to turn on?

  3 will synchronize these photos/videos to any Mac with installed pictures that is connected to my iCloud account?

  Thank you.

  1 not sure, where the 192 difference comes from.  Monitor to see...

  2. make sure than iCloud as photo library & download on my photo stream are turned on, and successfully, you need to download to iCloud.

  3. Yes, photos/videos will be synchronized across all devices via iCloud.

• Problem with Web Builder and MySQL connection

  Hello

  I created a web service VI (see picture attached) to connect my Web Builder application with a MySQL database. The problem is that I get nothing on my exit signs during the call to the web service VI.

  Some tests I've done:

  (1) this web service VI works perfectly (I mean indicators 'value', 'status' and 'data_hora' give the desired result) when the VI run directly through LabVIEW. MySQL connection and my VI are OK...

  (2) I know my web service VI was successfully built and deployed because the indicators give me some value if I sign something for them other than my SQL output

  (for example: if I put a string constant "Hello" on indicator "valor" I get "Hello" when calling the web service VI)

  I suppose that the database connectivity kit is not supported when a VI is integrated with a web service VI. In my case, kit screws are inside the subVIs 'start', 'exec 2d' and 'stop' showed in the picture as an attachment.

  Any idea?

  Thank you

  Marcelo

  

  I'm using LabVIEW 2001 Wesley, but I solved my problem.

  It was just a MySQL data source problem: I just had to add my info DB through C:\Windows\SysWOW64\odbcad32.exe.

  Thank you

  Marcelo