Tecra 8000 composite video output

Similar Questions

• Video - Tecra 8000

  I have a Tecra 8000 with Windows XP Pro installed.
  Everything works perfectly, I've updated the BIOS to v9.3 - BUT I can't get the video of the matches to work.
  I tried the RCA Jack on the back and also connected the SVGA dongle to the outlet side and used the composite video output on that, but no signal seems out of one of them.

  I've tinkered with various different BIOS settings, use the Fn + F5 key all to nothing does not.
  I read in the forum here that others have the same problem, so I also add a call for help with this one. May I ask, has ANYONE managed to actually get a composite video signal on their Tecra?

  Hi Peter

  If your Tecra comes preinstalled with Toshiba Recovery CD all the drivers and tools should work properly. In this case there are, in my view, two reasons that could explain why it does not work. Is mobile the cause of this problem or there is a problem with the TV and TV setting.

  Using the FN + F5 key combination, you can switch to an external device. It will be interesting to know if it works properly with the external monitor. It is not the same port, but the tool is the same. You can also try to connect your laptop to another TV. Sometimes it is not easy to say what may be the problem. If there is no way to have some success, you need professional help. Maybe the service partner can perform a short control of video composite output port.

• Output, composite video on F25

  Where is the composite video output on the machine F25? I want to save the composite video and audio output to my new MP4 Player. File transfers do not seem to work, so I'll come back later. I think I can leave the MP4 to create the file in record mode. Thanks for any help!
  George

  Hi George

  As much as I know Qosmio doesn't have this kind of port in. just composite can you please write what MP4 Player you have?

  Can MP4 Player be connected with a USB cable?

• Tecra 8000 - TV on WXP

  Does anyone know what I should do to make it work on the laptop Tecra 8000 TV connection output? I have Win XP OS installed.

  When I connect the video cable, the TV screen is all black. I can connect my desktop PC to TV the same way and it works. The laptop has Magic Media 256AV video card. I thought that maybe the problem was with the driver, but I can find them only for Win 98.
  Thanks for your help.

  AFAIK this Tecra older is not delivered with WXP which means that you use your own installation of the OS. In this case check the graphics card setting to activate the TV option.

  It seems that Toshiba doesn't support WXP for this device. Try to find the driver WXP on the card manufacturer download page.

• Video output port does not work on Tecra 8000

  My Toshiba Tecra 8000 screen has cracked and I realized this was a video output port, but it does not work.

  Can someone help me?

  Hello

  What video output port can you hear? The VGA port or the output port RCA-video? In both cases, the external display you seek, should give a picture.
  If this isn't the case, it should at least be configurable in windows.

  Please specify your question and tell more details on exactly what you want.

  Welcome them

• Tecra S3 Advanced Port Replicator III more: video output, analog & digital

  I have a Tecra S3 in association with Advanced Port Replicator III.
  I can't get the two graphics cards to work together.

  The analog and digital video output should work together.

  It works on a Tecra S2, but not on the S3?
  Does anyone have an answer?

  Hello

  You want to use both outputs DVI and VGA on Advanced Port Replicator III graphics more simultaneously?

  Advanced Port Replicator III more supports the use only if the computer system unit laptop itself also supports the simultaneous use of RGB & DVI.

  So that would mean that the backs of Tecra S3 not supported this feature

• Tecra 8000 TV out when it is docked

  The docking station for the doen't Tecra8000 replicate the TVout connector, but I have a cable to right angle that matches the TV normal port when connected and allows the cable out the host unit. TV connector normally output is disabled when it is docked and is there a setting in the registry or something in 98SE to re - activate?

  I connect my Tecra to a TV to watch DivX movies on the big screen, with the audio goes to my stereo, but I need to use the device with the Replicator, because the server containing my video files on a network, so I need the capacity of the network. I COULD use a network adapter, but then that beats the purpose of a docking station with the LAN!

  Retro Hi

  I'm a bit confused. As much as I know some Tecra 8000 have no LAN card. If your camera has card LAN and LAN port why you n t plug it directly into the TV and LAN without Port Replicator?

  I'm not sure if the port is disabled, but you can test if you can 100%. If there is no success, you must use the PCMCIA network adapter.

  Good bye

• Tecra 8000: Question on Windows XP performance

  My Tecra 8000 is located in the Microsoft minimum specification to run Windows XP.

  I fear that by installing XP, the machine will produce wrong with XP, devours resources.

  I would welcom hearing from others who have the experience to put XP on this or similar spece laptop.

  Used PC for internet/email and general use Office - no software starved of CPU/memory used.

  Paul.
  ++++++++++++++++++++++++=
  Specification of the machine: -.
  Processor: GenuineIntel family 6 model 6 366 MHz walk 10
  Math support: present
  BIOS: TECRA8000 v9.30 TOSHIBA, 31/12/99
  Bus type: PCI, ISA
  Ports: 1 parallel port, series 2
  Memory: 256 MB (25% used)
  Floppy drive: 1.44 MB
  Hard drives: 18,63 GB
  Multimedia: CD-ROM
  Video: 1024 x 768 in true color, NeoMagic MagicMedia 256 AV version 4.20

  < operating="" system="">Windows: 4.0 (Build 1381)
  NET Clients: Microsoft Windows Network

  Hello

  The material must be able to handle the Windows XP but I think that you will not find the Toshiba XP drivers for this device.
  Therefore, it will be very difficult to run Notepad with all Toshiba Tecra 8000 features.

  However, I think that it of possible to install Windows XP but the operating system will not work with maximum efficiency.

• Tecra 8000: W2K - how to operate the 2 screens at the same time

  I have a tecra 8000 with win 2000 pro is installed.

  Everything works fine with one exception...
  Press the [fn] [f5] keys to use the device outside.

  Is there a way I can get it to run 2 screens at the same time (either cloned or, preferably tv being a secondary monitor)?

  If anyone can help I would be eternally grateful

  Thank you

  I'm not familiar with the Tecra 8000 and W2K operating system. If there I sno good driver on Toshiba download page (I assume W2K is not supported for this model of laptop), please try to find the driver somewhere on the net. I found some info your unit has NeoMagic NM2200 (MagicMedia 256av) video card.

  To use an external monitor as a second monitor, or extended display just try to use the Windows settings in display properties.

• Tecra 8000 sudden power outage

  Hello
  I have a tecra 8000, the problem is that there is a sudden break or sudden running (roaming), the outlets led turns orange instead of green.

  The cable which is the output of the zine warms

  Hello

  Sorry, but I don't really know what you mean. Have you had problems with the AC adapter or the battery charging procedure?
  I can t give you an adequate response to your problem now. Perhaps you can describe your problem in more detail.

  But nevertheless it its s like a power supply problem. In this case, I recommend to contact the service partner.

  Good bye

• WHY NO VIDEO OUTPUTS TV / MONITORS?

  Does anyone know why the televisions and monitors have no VIDEO OUTPUTS of any type?  If anyone is aware of a TV or monitor that has any kind of OUTPUT video integrated (e.g., HDMI or component or composite or S-video or RF/coaxial terminal older types), I would greatly appreciate the number of brand or model.  I don't think that there is still, perhaps to keep the price down, or even to have people subscribe to cable and rely on a cable or DVR to record TV programs, to pretend that the cable companies have been dictating the characteristics (for we require to subscribe to their services/facilities). Does anyone know why TVs and monitors DO not have a built-in VIDEO OUTPUT? (However, they have several redundant entries!)

  Thank you so much.
  Josie

  Hi Josie,

  What version of the Windows operating system is installed on your computer?

  I suggest you to consult the following Microsoft article and check if it helps.

  Set up multiple monitors: http://windows.microsoft.com/en-US/windows-vista/Set-up-multiple-monitors

  Setting up dual monitor: two screens are better than one: http://www.microsoft.com/athome/organization/twomonitors.aspx

  Understand multiple monitors: http://windows.microsoft.com/en-US/windows-vista/Understanding-multiple-monitors

• The program monitor empty composite video.

  2 x 2.26 Ghz Quad Core Intel Xeon

  16 GB of DDr3 memory

  2011 mac Pro

  DeckLink Studio 4 k audio and video output running at the receiver and external controller

  NVIDIA 5770

  Graphics NVIDIA Quadro 4000 card

  The program monitor is empty. I've got audio of counting. I can get staff to record the signal, but in composite video, nothing comes through. The video and audio signals are through my card of cause on an external monitor and speakers, but the program monitor is just empty.

  I tried restarting the computer and the creation. Check the updates of drivers Cuda. 6.1.18 running

  Already old version 6.5.14 but the problem persists.

  Tried to create a new project.

  I tried different video settings for the sequence, but all behaving the same way.

  I can't video playback in my UI for the source or video monitor.

  Help, please.

  Contacted support via chat. Is that the rendering engine has been set to OpenCL rather than Cuda. To do this, go to 'file/project settings/general' at the top of this is the rendering engine of access. If it isn't on Cuda and you Cuda, then you will not have playback. Problem solved. I feel stupid, but there is the answer if someone else needs.

• WT8-A-102 does support composite video?

  WT8-A-102 support RCA composite video (TV-out) via micro HDMI port (with the right adapter)?

  And it is perhaps a silly question, but it supports composite video to the 3.5 mm jack?

• Updating BIOS for Tecra 8000 without floppy

  I searched this forum a solution update the BIOS without a floppy drive. The only one i found was this thread [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=66966&tstart=0], but there is no file .iso for the tecra 8000 series.
  is there a solution to get the new bios installed on my tecra 8000 without any floppy drive?

  I checked Toshiba BIOS download page on http://www.toshiba.eu/innovation/download_bios.jsp and TRAD BIOS version is proposed. This old Tecra is maybe 10 years and now, Toshiba has offered traditional update the BIOS only.

  Win versions are later available with latest Tecra 9000/9100.
  I'm sorry.

  Maybe stupid question now, but why do you need the BIOS update?

• Tecra 8000 - failure to CD-ROM - new installation disc?

  The CD-ROM drive in my Tecra 8000 has a defect. It attempts to load a CD-ROM, LED is flashing, it stops, and then the drive LED is lit.
  So I guess the drive is down.

  What kind of new CD-ROM is suitable for this laptop? Toshiba only original ones?

  Hello

  Wow, the Tecra 8000 series is really old. Do you use yet this laptop?
  It feels like the notebook would come from the stone age ;)

  However, I think that the CD/DVD drive supports * interface IDE but not all readers would be compatible due to master/slave/cable select settings

  It seems that the reader of DVD-ROM + Toshiba - SD-C2002 + would be compatible.
  Not sure if you'll be able to get this disc because of the age of the unit, but probably the authorized Toshiba maintainer in your country could provide some readers compatible optical disc