NB250 connected to Regza TV - no sound

Similar Questions

• Connection to (Qosmio G20) Surround sound

  I'm trying to connect my Qosmio G20 to my sysytem via an amp external surround sound.

  As far as I know I have everything connected correctly, but I'm only obtaining from my front left speakers and rear no where elsewhere.

  I checked the speakers and all the settings I can think on the laptop, is there something that I don't have to send the signal to all the speakers?

  Any help is greatly appreciated.

  Thank you very much

  Hello

  Check it please this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3665&messageID=12229#12229 topic. I believe that display Quad will be useful for you.

  Good luck!

• Why is my laptop takes long to connect and made a hissing sound and a flashing light on my caps button

  My computer is to take some time to connect and there is a hissing sound with flashing button caps

  [Moved from comments]

  When a computer makes sounds, it usually means a hardware problem.  The noise could be a fan, an optical drive, trying to turn or any number of other things.  Without actually hear it, who can tell?

  If you have a keyboard lighted, flashing can also have several causes.  You can be a normal self test that passes when the PC starts.  Only you can know that, given that you have and see it boot regularly.  If it is past or did he just started at some point?  If she just started, what has changed on your PC just before this?

  Regarding the newspaper slow process, maybe you have many programs in your startup process.  Once logged in, look in the startup folder (Start > all programs > startup, according to your version of Windows, which you decided to keep it a secret) to see how many programs you had added, and remove those that you don't need running whenever the PC starts.  You can also use the "msconfig" program to watch your Startup registry entries, but unless you acknowledge what they mean and are comfortable editing the registry, control the start-up of this way is compex probably more than you want to address.

• external connection monitor turns off / mutes sound

  Moving of Windows 7 music, Photos and videos>

  We have a laptop Dell XPS running Windows 8. When connect us an external monitor to the monitor, the sound port is disabled, or through the speakers of the laptop or the headphone jack.  If the external monitor is disconnected, the sound comes back immediately. There seems to be no way to have both an external monitor connected and get her - isn't there some hidden settings specific to laptops or something?

  What Dell XPS laptop - and most importantly, what type of connector and what type of cable do you use?

  Assuming that you have a 'mini displayport', see these two debates:

  http://en.community.Dell.com/support-forums/laptop/f/3517/t/19481729.aspx

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-hardware/mini-DisplayPort-audio-capability/89394a5c-474a-4fcd-9726-8af88326829a

  If the port minidisplay computer laptop XPS does audio support (and based on the first link, I wouldn't trust necessarily Dell support to give you a correct answer), it is unlikely that linking this port disables the internal speakers and the headphone jack.

  I suggest that you focus your research in support of Dell forums.

• HDMX Jam 2 are connected and paired but not sound! Help, please!

  so I have 2 hdmx jam ' and they are paired and connected but once I put them as the speakers by default and play a video youtube by saying theres only audio bits here and there, but without consistency. I am also on a Lenovo thinkpad T440 if that helps.

  Hello Shizzle,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  Have you made any changes to your computer hardware or software?

  Thank you to provide detailed information on the issue.

  This problem may occur when audio driver is corrupted or the audio settings are incorrect.

  Method 1:
  Please run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  In addition, run the audio Troubleshooter.
  Reference:
  Open the troubleshooting of Audio playback
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  If this does not help, then use method 2.

  Method 2:
  I suggest you to update the audio drivers from this link:
  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/ThinkPad-t-series-laptops/ThinkPad-t440/downloads/DS035939

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Want TO TS15j021 when an external monitor connect through HDMI is NO sound through speakers.

  I have attached a Samsung LED 27 "external display on my laptop via HDMI port and install double screen, NO sound/audio to come through the laptop speakers. However, when I select just the screen of the laptop, the sound comes back and works very well. Any suggestions would be much appreicated.

  "Accept as Solution" Thank you for your help. It worked a treat.

• tried to connect my 5.1 sound system to my touchsmart 520 but not to activate the rear speakers.

  They work very well on my other desktops (I tried 3). Is this a problem with the heartbeat software came with the computer? I downloaded the latest driver and lost a lot of time, but nothing helped. Can anyone help?

  Hello

  I was checking the connectivity for your for a 5.1 speaker system, and it seems the 5 speakers are connected to the subwoofer, and from there to the subwoofer, you will need to connect 3 cables for the sound card. If that is correct, you cannot connect to our unit in this way because we have only one audio out port... so it is the reason for the 2.1 System...

  http://www.creative.com/products/speakers/HOWTO/?c=2&SC=2&SSC=3

  Hope that clarifies the problem now.

  Thank you

• Bluetooth - no sound speaker

  Problem: No sound output for bluetooth speaker.

  Computer: MacBook Pro mid-2012. El Capitan 10.11.5 installed two weeks ago.

  Location: Speakers Sony SRS - X 3 connect to Bluetooth fine, but sound goes to computer speakers.  Information system presents the correct information:

  Apple Bluetooth software: 4.4.5f3 17904

  [normal stuff deleted]

  Devices (paired, configured, etc.):

  SONY: SRS - X 3:

  Address: 0C-A6-94-7C-FD-77

  Major Type: Audio

  Minor Type: speaker

  Services: Speakerphone, Dev SPP, headphones

  Paired up: Yes

  Configured: Yes

  Connected: Yes

  Manufacturer: Cambridge Silicon Radio (0x5, 0x27BF)

  Device class: 0x04 0x05 0 x 240414

  RSSI:-59

  Role: Master

  Connection mode: Sniff Mode

  Interval: 506,25 ms

  Taken BDUS supported: Yes

  eSCO supported: Yes

  Taken SSP in charge: Yes

  The speakers worked correctly between the update of El Capitan two weeks ago and today.  I did not any changes to the system since then.

  The sound preferences pane shows only the internal speakers as an output option.  The computer works properly in all other respects.

  I tried to reboot, reset the NVRAM, connecting headphones and Bluetooth reset via the Debug menu.  It seems the main symptom of the problem is the absence of Bluetooth as an output on the sound preference pane option, but I couldn't find any discussion about it.  (I assumed that Bluetooth speakers would be present as an option, although it does not mention preference help its component.)

  Try resetting the SMC... might help, can't hurt.

  Barry

• No. 5.1 surround sound HDMI

  Problem - I don't get that ' "two-channel stereo sound during playback of a DVD (with Dolby) on my computer.  The computer is connected to an audio receiver that is set up for a surround sound.  Audio and video signals are transmitted from the PC via the HDMI 8.Lorsque on the video/tuner card.

  Computer - Compaq SR7510F

  Vidéo/Tuner - ATI All in Wonder HD

  Connected to Onkyo TX-SR604 through a video/Tuner card HDMI cable.  The Onkyo receiver is connected for 5.1 surround sound speakers.  Video signals are transmitted via the receiver to a flat screen monitor

  Sound - onboard Realtek

  According to the specifications for the SR5710F it is supposed to support its 6 speakers.  However the HDMI audio driver only allows me to select "stereo".  It is a select "surround" box, but the box is "grayed out".

  When I play the same DVD using a stand-alone DVD by Phillips drive, connected to the Onkyo receiver with the same HDMI cable, I get Dolby on the receiver.  This means that it is not a problem with the receiver, it must have something to do with 1) onboard Realtek sound driver 2) HDMI, or 3) the HDMI connection on the video/tuner card.

  I checked on the Web from Realtek site and they list a newer driver for Vista (32 bit), but when I use the Device Manager to update the driver, it is said that it is the most recent.  I don't know that the driver is the problem, so I'm hesitant to try for the heck of it.

  I tried the latest drivers Catalyst 9.1 for ATI All in Wonder card, but that didn't help either.

  Any idea?

  Telefunken,

  Thanks for the suggestion.  It worked!  There is absolutely no sense to me, nor it does not seem logical to select SPDIF, but I can't argue with success.

  I didn't need to buy Arcsoft Media Theater.  I was able to select SPDIF with ATI Catalyst and Microsofts Media Center.  I could get Dolby

  In my current setup, I updated ATI Catalyst 9.3 version graphics card and loaded the audio driver Realtek HDMI ATI R2.18.  Also in the BIOS, I put the Audio on 'Auto '.  I chose the HDMI, not the Realtek driver driver in Control Panel.  I chose Dolby and DTS bothy under the driver settings.

  Now I think I'll enjoy a Quantum of Solace from this nagging problem is resolved.

• PAV 14 14-v148ca laptop: no sound on my TV via HDMI cable more

  I used to have the sound on my TV, I tried 2 HDMI cables still nothing.

  I tried to download the links drivers on a separate thread, I found, my laptop does not support.

  I have the video, no sound on my TV when the hdmi cable is connected.

  In the sounds/reading frame, there is only speaker hp and helmet, no television while the cable is connected.

  Please help, this laptop is 5 months old... Didn't!

  On a separate note, why this portable plant so? Because of the Hexacore?

  I click with the right button in the playback window / audio, and click disabled devices. Voila, corrected!

• Satellite M50-130: no sound from speakers but helmet works well

  Hello

  I have a laptop Toshiba Satellite with Harmon/Kardon speakers, using the Realtek AC97 Audio sound card. For some reason there is no sound coming out of laptop speakers, but when I connect earphones I get the sound perfectly fine, if clearly is not a volume control number. Device Manager indicates that the sound card works fine.

  I tried the system restore, and it does not work. Can someone help me please?

  Thank you! :)

  What s the name of the laptop?

  Looks a bit like a problem with the speakers for laptop
  The graphics card and the audio driver works very well if the sound is coming through the headphones.

  In this case, the technician should be contacted because everything looks like a hardware problem.

  Good luck

• Speakers are disabled if Satellite Pro is used without connection to the sector.

  Could someone help. Recently I unplugged my computer to use just the battery mode. When I switched it on it took awhile to load my settings but also the speakers have been disabled. I had 3 hours of remaining battery life. When I connected to the Socket returned sound but I lost the "speaker" icon. That's happened?

  Hello

  first of all, because you wrote that failure is there for some time (not from the beginning, failure does not appear when the laptop was purchased), I would try to exempt all the software problem. To do this, the best way is to recover the original laptop with Recovery CD/DVD.

  If you've already tried this, I recommend contacting the local toshiba service partner.

  BR, rYan

• Done Tecra A8 PTA83E support 5.1 system speakers & how to connect it

  I have Tecra A8 PTA83E lap top model. (Serial No.: X6100725H)
  When I check my audio system in the Control Panel, it is show the types of outputs for 5.1 suround sytem, even some more up to 7...

  I bought a 5.1 speaker system, now I want to connect with the laptop.
  It has two input pins normal for speakers and input microphone.

  When I check the laptop, it has two plugs for the audio output and others for the mic input.

  Could you please tell me this laptop will support, if so, where the decision-making support or what I by an adapter that allows two taken from a jack (laptop audio output)?

  Thanks in advance,
  Karine

  As far as I know this will work with a digital output only sound. At your Tecra this optical port? I don t think so. I know that Toshiba multimedia notebooks have a.
  So I think that you cannot connect to 5.1 surround sound directly on your Tecra.

  Sound in the Panel options are standard options of Vista.

• Poor sound quality M70 with headphone jacket

  Hello!

  I have Satellite M70 and I have the following problem.
  I want to use jacket headphones to connect my PC to my sound volume amp ge better for movies.
  But there is a sound of crackling on the line. It's so bad that I couldn't turn the volume in my aplifier.
  When I get out of my power supply (laptop) this noise is endangered!

  Hello

  I've heard about a similar question.
  Electricity could in my opinion a bad influence on the sound quality.
  These problems occur in the recording studios.
  I n t have much experience or practical knowledge questions but trying to Google a bit. I m you will find lots of useful information

• Sound from internal speakers past (iMac 21.5 mid-2011, Yosemite 10.10.5)

  Last week, exactly after I unplugged my headphones, the sound from the internal speakers went and I don't understand how to solve this problem, please help.

  Sound still works when I connect my headset (or other device) to the audio output.

  Sound still works when I connect to my USB external sound card.

  Internal speakers still work (I can hear the start-up tone when I turn on the machine).

  In preferences / system I see "Digital output" instead of "internal speaker".

  Volume buttons do not work,

  Audio output leddoes not light.

  I tried:

  -Reset the PRAM,

  -SMC reset,

  -' sudo killall coreaudiod ".

  -repair disk permission

  screenshot:

  Plug and remove the headphones.

  If you see the red light in the headphone port, plug the headphones

  in and o ut of time port 5 or 6 to swing the microphone inside.

  Audio output can be blocked using digital technology.