DMM 5.2.2 7835 H 2 DMM 5.4 VM migration

Similar Questions

• DMM 5.3 on MCS - 7835 H 3 and DMM-FA-C210-K9 failover

  Hello

  We are working with a customer who wants to add redundancy to their existing environment of DMM. We initially deployed their solution on a Server 3 - DMS MCS - 7835H and finally improved to 5.3. Now, they want to add the failover and the DMM-FA-C210-K9 with DMM-FASW-52-K9 bought another partner. After sitting idle for several months they have committed to us to help find a solution.

  I see 5.4 is able to run on a virtual machine. I have the following questions.

  Can I upgrade the DMS MCS7835H3 v.5.4? Based on the upgrade document 5.4, it seems to corroborate.

  • If we can improve the MCS7835HE-DMS 5.4 failover will work with the DMM-FA-C210-K9 Server?

  Since they already have the DMM-FA-C210-K9 server, can it be used as a host VMware to run 5.4 practically?

  • If so, failover will work with the MCS - 7835H 5.4 3 - DMS Server?

  Ray,

  The answer to both your questions is no.  None of these options is supported.

  If you use a virtual host primary servers and failover must be virtual.  You cannot mix types here.

  Also the MCS 7835 is not supported in a failover deployment.  Only the DMM-SVR-C210-K9 as backend is supported by 5.4 tipping guide. http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_4/dms/failover_guide/dmsfailover.pdf .  However, the DMM FA C210 K9 can be used as the fallback server.

  Hope this helps

  John

• DMM 5.2.2 - 5.2.3 MCS 7835-H2

  Hi all.

  I have a client that is running DMM 5.2.2 on a MCS 7835-H2. They bought a C210 to run DMM 5.2.3 a migration of the CSM hardware platform. I know that DMM 5.2.3 is not supported on the CSM hardware platform.

  http://www.Cisco.com/en/us/docs/video/digital_media_systems/5_x/5_2/DMS/upgrade/guide/523UpgradeGuide.html#wp316812

  However, I want to do is upgrade their 5.2.2 existing DMM on MCS to 5.2.3 in a migration window. Once completed, the system backup and restore to DMM 5.2.3 on C210.

  My question is it really possible to upgrade the DMM 5.2.2 to 5.2.3 on MCS 7835 - H2, regardless of whether If Cisco will support it or not.

  Thank you, Tim.

  Tim,

  The MCS - H2 will not support the 5.2.3 in all conditions, you can't fool the upgrade of point 5.2.3 on this platform.

  Your best option is to wait that the STM to the UCS migration tool, this tool is currently in the final stages and should be available shortly (I think in a few weeks - not yet fixed ETA). This migration tool can solve your problem, it backs up the database and the configuration of a MCS platform, and you will be able to seamlessly restore on a material of UCS work 5.2.3.

  Thank you

  Sagar Dhanrale

• Delay time 4070 PXI DMM

  Hello

  I use a PXI-4070 DMM and DotNet "SoftwareTriggeredMultipointAcquisition" example

  I want to trigger the DMM4070 with the AuxTrig entry to the front of the instrument.

  This works very well, but how can I change the time out the of triigger?

  It is now on 2000msec. I want to 10000msec.

  When I us the example and do not trigger in the 2000msec I get error message saying:

  ModularInstruments.NIDmm: The operation did not complete in time maximum allowed. Timeout: 2000mS.
  Error code:-1074126845

  Thanks in advance

  Wissam

  Hello JaredRo

  I can set the time-out period now.

  Problem solved. Thank you Manny

  With greetings

  Wissam

• Measure the resistance with PXI DMM 4072 on different frequencies

  Hi all

  I tried to get on board various and unable to find solutions for that. I'm trying to measure resistance using NI PXI-4072 on frequencey 1 kHz, but not luck. When I try to use Agilent LCR meter I see the correct value of the resistance.

  I've seen a few posts on this but don't have no satisfactory solutions.

  http://forums.NI.com/T5/Digital-Multimeters-DMMs-and/LCRmeter-test-frequency-for-resistance-measurem...

  In above post, someone said that I can use 4072 DMM OR digitizer, does not have a lot.

  Can someone please provide the right path for me to solve this problem.

  Thank you

  Hello Puneet_K,

  I checked the data sheet and the method of measurement described in the specifications of the NI 4070/4072 http://www.ni.com/pdf/manuals/371304g.pdf; indicates that the ability is measured using an alternating signal and select the test frequency range, for example 3 kHz, 1kH or 91 Hz. The resistance is simply measured using a DC signal, and it is often sufficient to measure the internal resistance of a battery. If you need a more flexible control for the measurement, you probably get a card like the function generator and then set a multimeter to measure the voltage and another DMM to measure the current and calculate the impedance of these values.

  I hope this helps!

  Kind regards

  -Natalia

• Specification OR ELVIS II + DMM

  Hello

  Recently, I use NI ELVIS II + for the characterization of the sensor due to the measurement of the resistance to 100Mohm.

  However, I found the spec said 100Mohm measurement can be done by using max test 5V voltage source and current source internal 500 nA? Using Ohm's law, 10Mohm has proved to be the maximum extent?

  

  Kind regards

  Sin Chong Yung

  Hello

  DMM NI ELVIS II has a permanent entry of 11 MOhm resistance. For the measurement of the resistance, the device under test (DUT) is assumed to be in parallel with this 11 MOhm. The ASE resistance is calculated from this nonlinear relationship by measuring the test whereas calibrated current excitation voltage and parallel resistance.

  For example, a 10 MOhm DUT measured in the interval of MOhm 100 with a current excitation nA 500 would show all (11 M: 10 M) * nA 500 ~ = 2.6 V.

  With a 100 MOhm DUT, the test voltage would be of about (11 M: 100 M) * nA 500 ~ = 4.95 V... right against the limit of 5 V.

  Enjoying a beautiful, the test voltage is (11 M) * nA 500 ~ = 5.5 V that is larger that the 5 V limit and is detectable in the 'OPEN' in the software.

  NI ELVIS II DMM design was obtained from an other DMM with the input resistance is selectable (11 MOhm or > 10 GOhm). In this case, the excitement of nA 500 could be used in conjunction with the 10 GOhm input impedance to give 10 MOhm resistance measuring range. Since the resistance of the DMM NI ELVIS II entry is fixed, there is a separate offer 10 MOhm.

  I hope this is useful,

  Charles Y.

  National Instruments

• DMM

  Hello

  H NIDMM 3.0.6 installation but I couldn't find examples in there.

  I have woul dsincerely grateful if you can help me to find the examples for the DMM OR C.

  Thank you

  -Sulva

  Hello Sulva,

  Examples in ANSI C are not installed by default. You will have to activate their installation by going to add/remove programs, and clicking on National Instruments software. In the list in the pop-up menu choose NOR DMM 3.0.6 and press the button Edit in the following pop-up window, navigate to Modular Instruments > NOR-DMM 3.0.6> > Microsoft Visual C++ Support and right click and select 'install this feature to local drive.

  Once this is done installing you should be able to find examples by going to Start > all programs > National Instruments > NOR-DMM > examples

• Export the extent of DMM trigger

  Hello

  I would like to export the trigger Signal, which I receive on channel 0 of the scope to a DMM in a PXI system.

  So far, the scope is what I want it to do (Acquisition of 1 Record with a length of 550000 at a sampling frequency of 50 kHz with a 1 s pre-trigger).

  I would need to know the value of the DMM measurement in the scope of triggerevent. For this, I have inserted the signal.vi 'export' to the scope and set it to trigger reference and as terminal output that I chose 'the trigger PXI 0/RTSI0 line. The digital multimeter, I put the command Source for "TTL0", which should correspond to the line on which I'am export the Signal of the scope.

  But it does not work. The DMM sends the value as soon as I start the vi (she does not wait for the Triggerevent). If I choose 'none' as a signal to export in the scope, the DMM waits until he goes into a timeout. Do I have to configure something differently, or do I have to use the vi TCIk?

  Thanks for your contributions!

  Pietro

  
  

• What version of NOR-DMM is later?

  It shows on the search page for the NOR-DMM driver, NI - DMM 15.0 was released in August 2015.  15.1 received July 2015.  See the problem?  15.1 was apparently released prior to 15.0.

  Which is the most recent?

  Hi CurtisHx,

  Long story short, NOR-DMM 15.1 is the latest driver.  The reason for this is that it supports a few things 15.0 have such as:

  1. support to debug a NOR-DMM device in use by another application, supervision or control of the aircraft in the NOR-DMM Soft Front Panel.

  2-OR-DMM 15.1 and later supports the following real-time operating environments:

  a. Module time LabVIEW Real-time

  b. LabWindows/CVI real-time Module

  However, NEITHER-DMM 15.0 only adds support for LabVIEW 2015.

  In regards to release dates, it was more to do with the process of downloading on the web.  Sorry for the confusion!

• External DMM communicates only with the LabVIEW executables

  Hello

  I currently have a system of power supplies connected with GPIB and an Agilent E34405A DMM connected via USB.  The system works fine when I use the complete Labview program, but when I make an executable and installler and put it on another machine, that I can not get the DMM communicate the work of supplies of power very well and done my other equipment.  Any thoughts?

  If your program LabVIEW use NI-VISA, you need to charge NI-VISA run-time on the target computer.

• DMM software does not.

  Why the digital multimeter (DMM) software does not work if the NI ELVISmx Instrument Launcher is?

  Initially, I installed subsequently myDAQ NI 2015 that included the NI ELVISmx Instrument Launcher containing the DMM software. Other pieces of software work however, the DMM stalls immediately after starting with a NI Instruments loading bar.

  I tried the repair option of software specifically for the NI ELVISmx driver and also tried wiping clean and reinstall fees. By receiving the same result.

  
  

• How can I measure the variable tension with the DMM and switch?

  Hello, engineer,

  I am a student, I want to measure the varying tensions from V to Via. I have the following equipment: SMU-1065 PXI-4065 PXI-2529. I use the PXI-8360 and PXI-8361 to connect with my PC. I hope I can do that when I have the next blood I should click with the mouse and connect the right position to the object of measurement.

  How can I achieve that?

  Any suggestions with great satisfaction.

  Since I know a little English, if I did not explain my question clearly, please ask me.

  Best wishes.

  Kind regards.

  chuanyuehuoxian

  Yes, you can.

  You can set the samples when using DMM.

  You can also refer to the example in LabVIEW.

  THX!

• Auto boot PXI DMM

  I use NI PXI DMM 4065/4071/4072 with MXI controller to measure the current continuous on my device.

  I am very sure that PXI DMM are not initialized because the device could not be activated at PC startup

  unless I opened the DMM front panel and cofigure software current continuous.

  Is it possible to auto initialize PXI DMM when I start computer, as do the autonomous way instruments?

  Thanks in advance.

  Adam

  Hi Adam,.

  I think you could do this by building
  a VI to set up your DMM and then placing the VI (selected to run
  When opened or configured as an executable) in the startup directory
  (C:\Documents and Settings\All Users\Menu Menu\Programs\Startup). Hope
  This is useful!

• DMM (NI 4070), how to correctly set AC Freq (bandwidth) by the sampling rate

  using a NI4070 multimeter and I see the max connection is 300 kHz by respect it.  But I don't understand how to set the min and max, acFrequency according to the sampling frequency or speed reading.

  6 1/2 digits resolution, the speed can vary from 0.25 s/s to 100 s/s and this range corresponds to a lower end on the connection (minimum acFreq) from 1 Hz to 400 Hz.

  (Q1a) - is the playback speed, controlled by the minimum setting of IviDmm_ConfigureACBandwidth?   or vice versa?

  Otherwise, I do not see how to control the rate of reading or the sampling frequency.   IviDmm_ConfigureMeasurement only allows you to control the range and resolution.

  (Q1b) - is there a way to directly control the sample rate (digitizer) or playback speed (dmm)?

  (T2) - the upper limit of the bandwidth of AC always seems to be at 300 kHz... is there still a reason to reduce this maximum value?

  (T3) - Finally, unlike the traditional niDmm function, the resolution via the IVI configuration should be passed as absolute value; does directly when number of digits and the beach?   For example if I want to 6 1/2 digit to 300V range, I guess that by the specifications that the resolution should be set at 0.001 V... followign, if I want 5 1/2 digits to 1V range, the resolution should be set to 0.00001 V?

  Hi Rjohnson,

  I'll try to answer your questions as best as I can:

  Q1A.  The ConfigurACBandwidth function is used by the driver OR DMM to calculate the good aperautre for the measure.  So yes, by adjusting your minimum frequency, you will affect your reading speed.

  Q1B.  Your reading rate will depend largely on your measuring cycle.  To get a fast measuring cycle, there are a few things that you can adjust.  You can programmatically control your time aperature, as well as your time to settle.

  Q2. I can't find a reason to change. This parameter is only used for error-checking and verifies that the value of
  This setting is less than the maximum frequency of the device.

  Q2B.  I think what you say is right, but I'll need to check on that - I'll let know you as soon as.

  Hope that helps.  "" "I would recommend checking the explanation of the Cycle of the DMM measurement in DMM help' devices ' NI 4070" DMM Measuments "DMM measurement Cycle.

  Take care!!

• DAQ DMM AND on the same computer

  I have a 4060 DMM NI PCI and PCI Express 6259 on the same computer running under Windows XP/SP3 with drivers following: NI DAQ traditional = 7.4.3f7, NI DAQmx = 8.3.0f3, NIDAMM = 2.6 and = 4.1 MAX. In one of three times to reset the on-board computer, Device Manager cannot see the DAQmx Council. I guess that

  Normal
  0

  fake
  fake
  fake

  MicrosoftInternetExplorer4

  / * Style definitions * /.
  table. MsoNormalTable
  {mso-style-name: "Table Normal";}
  MSO-knew-rowband-size: 0;
  MSO-knew-colband-size: 0;
  MSO-style - noshow:yes;
  "mso-style-parent:" ";" "
  MSO-padding-alt: 0 to 5.4pt 0 to 5.4pt;
  MSO-para-margin: 0;
  MSO-para-margin-bottom: .0001pt;
  MSO-pagination: widow-orphan;
  do-size: 10.0pt;
  do-family: "Times New Roman";
  mso-fareast-font-family: "Times New Roman";
  MSO-ansi-language: #0400;
  mso-fareast-language: #0400;
  mso-bidi-language: #0400 ;}

  occurs because some resources in conflict (conflict Windows ID).

  Is a solution for this? Can someone help me?

  Thank you

  Virginia

  Hello Virginia,.

  As is apparent from this Knowledge Base, LabVIEW 7.1 is supported by the latest DAQmx drivers, so upgrading is no problem. However, whether or not it will solve the problem, I don't know. Let me do some research more in why the card may not be appearing on a few reboots but works fine on others.

  Have a great weekend!

  Frédéric