DMM 5.2 VM WARNING: File system ' / ' reached out to space
If I connect to the DMM 5.2 Application Administration Interface, I get a warning, which reached the root out of the file system.
WARNING: The File System "/" is reaching out of Space
I know, I may expand the disc itself, but is there a way to extend the system of files without console root login?
Here are some common reasons why you might encounter this error and
storage hard drive problems:
1. location of the video content & presentations. This error can
happen if you STORE your content locally on the Manager (DMM) digital media
himself. For best practices, video content * SHOULD * stored on
or remote servers.
2. the Logs files are excessive and files consume the available
disk space on the server of DMM.
Resolutions:
For point #1
-----------------
-You will need to pass video content to one or more remote servers
-Delete\Remove media files stored in the multimedia library
the DMM Server
-Create new multimedia files by using the URL for the content stored on the remote
Server (s)
Article #2
-----------------
For the DMS 5.2
-Access to the IAA for the DMM Server
-Select 'control unit '.
-Select "Indexing Options".
-Select "Clean_Logs".
Tags: Cisco Support
Similar Questions
-
WARNING: The system file "/ var/log ' reached out to space
I have a DMM version 5.2.
When entering the DMM via SSH or console shows me the following sentence:
WARNING: The system file "/ var/log ' reached out to space
How can I fix this error?
I await your comments.
Concerning
Hi Aurelius,
If the newspapers of cleaning did not help them (which I expect to). You can run in a known defect, this problem occurs because as the access_log does not turn properly after we reach the limit of size.
The Cisco default is #.
CSCti86040 - Access_log not turning or delete when erasing logs on DMM
This default is set in point 5.2.2 release of code, but you can open a TAC case and we can remove the access_log journal and apply the workaround for the same thing.
Thank you
Sagar Dhanrale
-
I have a windows 2003 Server sbs on a 4.01 esxi that does not start because it is suddenly out of space on the data store. How can I know which files can be deleted safely. When I started several months ago I had only a few files for the virtual machine. He needs to generate about 20 files. I have multiple vmdk files that take up a lot of space. Here is the error
There is no more space on the virtual disk, DSERVER.
GOPA.local - you can be able to 000003.vmdk.
continue this session by freeing disk space on the
relevant partition and click Retry. Otherwise,.
Click Cancel to end this session.
Info
2010-11-30 17:00:39
User
Ty brand
Sorry, it took some time, but I did a quick test on my test environment.
I've attached a file updated the vmsd which represents now two snapshots on the virtual machine.
You must download the file to the data store. If the two snapshots (consolidate Helper - 0-2) do not appear in the Snapshot Manager right away, you may need to remove the virtual machine from the inventory (right-click the virtual machine in the inventory and select "Remove from inventory") and add it back back (right click on the file vmx in the data store, and then select "Add to the inventory").
Once you see the two snapshots, first a ' Consolidate Helper-0 ' select and click 'delete '. This will consolidate the snapshot 58GB (... 000002.VMDK) in the basic disk. It will take time. Before committing the second snapshot, you should start the virtual machine to see if the snapshot is still ok after the virtual machine has been closed due to disk space is low. Once the VM starts and everything looks ok, you can remove the ' Consolidate Helper-2 ' second snapshot in the Snapshot Manager.
For the above, I guess that your basic virtual disk is supplied thickness. If this isn't the case, please report. Do not try to commit the snapshot in this case!
Before you start committing snapshots, make sure you that Veeam don't hit in the consolidation of the snapshot.
André
what I changed is in bold:
.encoding = "UTF-8" snapshot.lastUID = "100" snapshot.numSnapshots = "2" <-- old value: "1" snapshot.current = "100" <-- old value: "26" snapshot0.uid = "26" snapshot0.filename = "DSERVER.gopa.local-Snapshot26.vmsn" snapshot0.displayName = "Consolidate Helper- 0" snapshot0.description = "Helper snapshot for online consolidate." snapshot0.createTimeHigh = "300197" snapshot0.createTimeLow = "512329251" snapshot0.numDisks = "1" snapshot0.disk0.fileName = "DSERVER.gopa.local.vmdk" snapshot0.disk0.node = "scsi0:0" snapshot.needConsolidate = "FALSE" <-- old value: "TRUE" snapshot1.uid = "100" snapshot1.filename = "DSERVER.gopa.local-Snapshot100.vmsn" snapshot1.parent = "26" snapshot1.displayName = "Consolidate Helper- 2" snapshot1.description = "Helper snapshot for online consolidate." snapshot1.createTimeHigh = "300614" snapshot1.createTimeLow = "-1949083453" snapshot1.numDisks = "1" snapshot1.disk0.fileName = "DSERVER.gopa.local-000002.vmdk" snapshot1.disk0.node = "scsi0:0"
-
Very large log file C:\ running out of space
Hi all
We're going to have a problem with our VCenter server runs low on resources. The hard drive is partitioned in C: and D: drive. The C: folder had only 5 MB of free space on it.
We did some surveys looked at the SQL logs, which were very small, but in the directory where the databases are stored, we saw a single file in there called ' ESX - Vmotion_Log.LDF' which is 75 GB in size.
Does anyone know it's important or if it is safe to delete it to free up space on our C:\ drive?
Thank you
HM, thatts certainly a Log in SQL Server. Is there a database using this name in your SQL?
Kind regards
Gerrit Lehr
If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.
-
My computer is slow, so I did a repair disk with disk utility. It shows the following message: WARNING: SUID "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" file has been modified and will not be repaired.
This is what significantt and what I need to do.
In addition, anyone recommend a good antivirus, malware application; or is the system Mac enough? Wharton could I do for optimization?
1. it is normal. You need not do anything.
2. unless you use Windows on the computer or often to share files with computers running Windows, it just Synchronize Mac OS X and use your common sense.
(138148)
-
Backup error ReadyNas DUO - «read only file system»
Hello community,
I hope you can help me with a problem I'm having with my ReadyNAS Duo (v1) running Raidiator 4.1.14. At night, it is running a backup job that copies a file from a computer on the local network to the NAS itself. What often happens is after a reboot for a while, things work sometimes days, sometimes weeks. But then I get e-mails warning that contains journal like entries:
CP: cannot create the file ' / backup/projecten/./CAM_strip/01_v0.1.JPG': read-only file system
Usually this warning is given for each file (which means thousands) so that emails are big enough. And obviously the backup has not been made. I tried to solve this problem and sought similar questions on this forum and on the web, but nothing helped. I can't identify what is the cause.
Maybe you could help me the grace to some of the run settings, I can tinker too. I guess it has something to do with the ownership and rights to access these files and folders.
Thank you!
Hello Miss,
Aside from trying StephenB and JennCs suggestions, if you create a test share, can you tell us if you will experience the same behavior in read-only?
Forward to your response.
Kind regards
BrianL
NETGEAR community team -
MBR - Volume does not contain a file system recognized - after bootrec options
I was unable to install the Vista SP2 (as it appeared later, because of a Grub boot loader installed by Linux). I tried to reconfigure the bootloader and the partitions (which allows to boot directly into Windows), but after several bootloader configurations (load different partitions as well as MBR) and some partition resizing (resize incl. NTFS partition). Windows unbootable.
I tried Windows Rescue Disk:
Bootrec /fixmbr succeeded
Bootrec /fixboot did not work until I made the /scanos (including iedentified, after having disassembled the NTFS Linux partition and putting the flag of boot loader in the MBR and the default option of grub in Windows, there are 1 installation of Windows in C:\windows).
If I then repeated bootrec /fixboot he gave the message that the volume does not contain a recognized file system.
I also did bootrec /rebuildBCD (after renamed it bcd), ultimately without success.
In total, the situation of 'better' I reached was either a Windows startup with a cursor flashing something happens (apparently find the partition but not any which boot file or OS); or the spare arriving to determine that there is a partition of Windows Vista, but (following the first option to simply repair the system) 'no errors detected. " The second option here, "Restore to a previous point" refers to that there is no previous such restore point.
It took me about 24 hours now to finally get SP2 installed, but obviously with only murkier.
Hi Willem W,.
I suggest trying the (step 1 in the link) Startup Repair and then manually rebuild the BCD (Boot Configuration data) using Bcdedit.exe (step 3) in the article below and check if this solves the problem
Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing required information".
http://support.Microsoft.com/kb/927391
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Why can't I use a virtual hard disk on a UDF file system?
I have an external hard drive that has eSata and USB connection formatted in NTFS, where I have bootmgr and let me run windows native installers installations and windows on virtual hard drives with different software and different versions of Windows for testing purposes installed.
I wanted to copy a VHD to another USB that is used to share files with other operating systems and is formatted with the UDF, who is reading and writing on all operating systems.
Here it is: I can't use the VHD to a file directly from UDF system.
I can understand that, because of the file system limits, cannot use extensible VHDs on UDF. But I opened a command line, type DISKPART, ' select vdisk file = [UDF disc]: \07-100-clean.vhd "and says it's a unsupportted action.
Well... Make this hard drive virtual bootable since a UDF its imposible because it means modifing the bootloader, but:
How can I reach a kick from Windows 7?
Hello
This is a go to TechNet and ask the same question, given that this problem is taken in charge out there and not here.
Rob - SpiritX
-
Hi guys,.
IAM trying to find a plsql/pkg process that creates a file for example myiphones.txt (with content) and save this file as BLOB directly in a table in the DB (not on file system moreove there is no access to the file system) - Ive studied this but nothing about other than as_pdf3 that iam still working on.
Here are the summarized steps:
-------------------------------------------
1. run plsql to create a single file like myiphone.txt,
2. in this (myiphone.txt) inserts a record content from another table EMP as,
MYiPhone.txt
============
Greg Taylor,
Mike Owen
3 then finally record this (myiphone.txt) in another table MYFILES as BLOB - Note Please that I don't want to not refer to file system manager and I have not access to it for the time being,
I hope it is clear
no idea about the way to handle this is appreciated?
Thank you.
You can try this:
Data are from a clob table.
DECLARE L_BLOB BLOB; L_CLOB CLOB; L_DEST_OFFSET INTEGER := 1; L_SRC_OFFSET INTEGER := 1; L_LANG_CONTEXT INTEGER := DBMS_LOB.DEFAULT_LANG_CTX; L_WARNING INTEGER; L_LENGTH INTEGER; BEGIN -- create new temporary BLOB DBMS_LOB.CREATETEMPORARY(L_BLOB, FALSE); --Select CLOB SELECT CLOB_VAL INTO L_CLOB FROM MY_TABLE; -- tranform the input CLOB into a BLOB of the desired charset DBMS_LOB.CONVERTTOBLOB( DEST_LOB => L_BLOB, SRC_CLOB => L_CLOB, AMOUNT => DBMS_LOB.LOBMAXSIZE, DEST_OFFSET => L_DEST_OFFSET, SRC_OFFSET => L_SRC_OFFSET, BLOB_CSID => NLS_CHARSET_ID('WE8MSWIN1252'), LANG_CONTEXT => L_LANG_CONTEXT, WARNING => L_WARNING ); -- determine length for header L_LENGTH := DBMS_LOB.GETLENGTH(L_BLOB); -- Your custom INSERT INTO statement INSERT INTO MY_TABLE (NAME, BLOB_FILE, BLOB_LENGTH ) VALUES ('lala.txt', L_BLOB, L_LENGTH ); EXCEPTION WHEN OTHERS THEN DBMS_LOB.FREETEMPORARY(L_BLOB); RAISE; END;
Concerning
Tobias
-
Hi all
I need assistance with system files foglight on a solaris host agent
The agent is configured as follows, and I need the point of editing/GB to watch with the file system agent that I created
Global
Fatal threshold value 50
Critical threshold value of 55
Warning threshold value 60
Exclude/include (included) file systems
(Contents of the included list)
Remote host name. mount point. localhost | WARNING Thereshold | Critical Thereshold | Fatal Thereshold
dspdb01 /GB dspdb01 20 25 30
The system of files/GB is currently 99% used when you use the df - h command.
Size of filesystem used avail capacity mounted on
/ dev/blah/blah 20 G G 19 956 MB 99% / GB
With the above set up, I am not getting any alerts or emails
EDIT: I also have it works on mounted filesystem vxfs
ex: / dev/vx/dsk/EBIZADMIN/admin /EBIZADMIN1
Thank you
Gert...
Gert,
First of all, you receive data from file system? You should check to make sure that you are getting data. If this is not the case, check the list of file system types to make sure that your type of filsystem is included.
If you get data, I expect that your problem is with the thresholds. I need to test how your combination would work. I would have thought the file system list would be override the global default value, but both are feeling the way you listed them. your global values are descending from the warning to mortals, and the values of the file system you growing caution to mortals. They should be Crescent, where the fatal value must be greater than the value of warning. If you can fix the global values.
But first confirm you've found data for the file system.
Jeff
-
Adding to the rule of file system capacity
Hello
The ability of current file system rule resembles the current % used and compared to a registry variable. My team of storage request that I change the rule. They wanted to be able to specify a more granuilar % as 99.5% for criticism or 99.2% for warnring (for specific disc) it's because these drives are very large. However, it seems that the default metric is supported only integers... .such as 99%.
That said my next idea was to change the alert rule that if the player was at 99% and had to say less than 1 GB of space... for example. In this way, he would not be a problem for smaller and larger discs would have a second check. However I don't know how to change the condition to achieve this result. That's what brings me to yall. Thanks for any help in advance
Here is the current status for the warning
test = true;
for {(obj in scope.detail)
If (obj.topologyTypeName.equals ("AccessInformation")) {}
test = obj.writable;
}
}
If {(test)
return #capacityUsed # > = registry ("INF_FileSystemCapacityWarning");
}
Returns false;
You can create your own registry variables and make double whole vs. and those who use instead. With respect to the addition in the available space, you could manually set or use a registry variable. There is space in MB.
test = true;
for {(obj in scope.detail)
If (obj.topologyTypeName.equals ("AccessInformation")) {}
test = obj.writable;
}
}
If {(test)
return #capacityUsed # > = registry ("INF_FileSystemCapacityWarning") & #spaceAvailable #.<=>=>
}
Returns false;
-
How to handle "file system almost fulll" issue in Oracle 11 g?
Hi DBAs,
I got a warning that the file system/u01/app/oracle/product is full of 99.99% and the storage disk is also full.
What I'm supposed to do in such situation?
DB environment:
AWS
version: 11.2.0.3
storage type: EBS
Kind regards
Ritu
Are you sure these log files are only a few kilobytes? .. or do you, wait...
Run the following command to list all the *.log files modified in the last 7 days as well as to its current size in KB
find/u01/app/oracle/product - iname "* .log" - mtime-7 - printf "%p %k\n.
The mount point is/U01?... or is - this/u01/app/oracle/product?
You can also use (and customize) the statement above to a different path, type of file, etc...
HTH,
Thierry
-
File system error, cannot be deleted
Hey,.
I had to rebuild a RAID array on a customer Server (in fact I redid it completely). While at it, I upgraded ESXi 4.1 to 5.0 u1. After that, I can't add the RAID array storage. I think a lot, it is the previous file system which is f - ed, but it seems that no matter what I I can not erase completely everything on it. Here are the commands I tried:
vmkfstools - ch. /vmfs/devices/disks/eui.22570001555c70ed vmfs3
It gives me:Could not check for existing on the device file system "/ vmfs/devices/disks/eui.22570001555c70ed".
Usage: vmkfstools - C [vmfs3 | vmfs5] / vmfs/devices/disks/vml... or,
vmkfstools - C [vmfs3 | vmfs5] / vmfs/devices/disks/naa... or,
vmkfstools - C [vmfs3 | vmfs5] /vmfs/devices/disks/mpx.vmhbaA:T:L:P
Error: Cannot access devices, please check your connection to the device.
fdisk-l /vmfs/devices/disks/eui.22570001555c70ed
Makes me:
***
The fdisk command is deprecated: fdisk does not support GPT partitions. Thank you for using partedUtil
***Note: the sector size is 4096 (not 512)
Disk /vmfs/devices/disks/eui.22570001555c70ed: 1999,9 GB, 1999999336448 bytes
255 heads, 63 sectors/track, 30394 cylinders
Units = cylinders of 16065 * 4096 = 65802240 bytes/Vmfs/devices/disks/EUI.22570001555c70ed disk does not contain a valid partition table
partedUtil mklabel msdos /dev/disks/eui.22570001555c70ed
Makes me:
WARNING: Device /dev/disks/eui.22570001555c70ed has a size of logical sector of 4096. Not all parts of GNU Parted support at the present time, and the labor code is VERY EXPERIMENTAL.
glibc detected * < unknown >: double free or corruption (! prev): 0x0804f200 *.
glibc detected * < unknown >: malloc(): memory corruption: 0x0804f408 *."JJ so of="/vmfs/devices/disks/eui.22570001555c70ed = / dev/zero "bs = 4096 count = 34 = notrunc conv
"JJ so of="/vmfs/devices/disks/eui.22570001555c70ed = / dev/zero "bs = 4096 count = 34 seek = conv 488281054 = notrunc
It seems to work, I get results back, but run the above commands again gives the same results if. Can someone help me with this please?OK, so I tried to look for other combinations of error messages and others and found some info on that. Seems he is kind of a common problem and it is generally due to two reasons.
(1) the logic unit number is too big (more than 2 TB). However, mine was 1.82 TB.
(2) if there is previous data on the VMWare drives may have problems reading it. I reset (both quick and full), the RAID repeatedly, which is supposed to make the blank disc, but it did not help.
But see the ' Note: sector size is 4096 (not 512) "message made me think. Maybe I chose the size of sector 'wrong' when I recreated the RAID array... I went into the RAID bios and deleted the berries, recreate them again with the sector size 512. In addition, to be absolutely sure, I created two logical drives instead of one; 1 @ 1 TB and 1 @ 820GB.
Booted up and went well add guide to storage again and this time it worked fine.
I remember no adjustment of the sector size to anything other than the default value is 512. And even with a size of 4 KB allocation. So, really, I'm leaning towards the size of the logical disk. Odd how VMWare is supposed to manage up to 2048 GB, but still.
-
How can I migrate content from file system to webcenter content using inbound refinery?
Hello
How can I move content 'Webcenter content' using Refinery Inboundfile system? There is a lot of content in my system, I want to go to "Content Server" using inbound refinery.
How can I reach it? Is it possible to do this? If this is not possible using inbound refinery, so how can I do this?
I use 11.1.1.6 version.
Help, please.
Concerning
REDA
Hi reda,.
First - incoming refinery isn't real resources whose content is ingested in the content server. 'S done it by Webcenter Content server that holds / process of all content items.
IBR is only used for the conversion of 1 format to PDF documents (and some others).
So, in your case, you must first set up a content server and then install Desktop Integration Suite customer on your physical machine. In this place, you can drag-and - drop all the content of the file system to the content server.
Links to this documentation are available from the following links:
Content of the WC: http://docs.oracle.com/cd/E28280_01/doc.1111/e26692/toc.htm
Desktop Integration Suite: http://docs.oracle.com/cd/E28280_01/doc.1111/e10624/toc.htm
Please go through the documentation first to get those basic concepts allowed.
Thank you
Srinath
-
I am trying to download a pdf (and xls) file from the linux file system by using this procedure. I have a directory defined for "OFFICIAL REPORTS" in Oracle, and I can verify that the file exists in this directory. The length of the queue is returned, but we get an error on the statement of owa_util.mime_header. Here is the procedure:
CREATE or REPLACE procedure Web_Download (file_in IN VARCHAR2)
AS
l_filename BFILE.
V_LENGTH NUMBER;
BEGIN
l_filename: = BFILENAME ("OFFICIAL_REPORTS", file_in);
V_LENGTH: = DBMS_LOB.getlength (l_filename);
dbms_output.put_line (' length of file: ' | v_length);
--
BEGIN
-implement the HTTP header-
-dbms_lob.open (l_filename, dbms_lob.lob_readonly);
sys. HTP.init;
OWA_UTIL.mime_header ("application/octet", FALSE);
sys. HTP.p ("Content-length: ' |") v_length);
sys. HTP.p (' Content-Disposition: attachment; filename = "" | ") file_in | '"' );
OWA_UTIL.http_header_close;
WPG_DOCLOAD.download_file (l_filename);
exception
WHEN no_data_found
THEN
BEGIN
dbms_output.put_line (' end of file reached.) Closing file ');
END;
WHILE others
THEN
dbms_output.put_line (' error num: ' |) SQLCODE. "message: ' |" SUBSTR (SQLERRM, 1, 64));
dbms_output.put_line (' another error has occurred.) Closing file ');
-DBMS_LOB. Close (lob_loc);
END;
DBMS_LOB. Close (l_filename);
END web_rs_download;
/
When we run the package in Oracle, we get this dbms_output:
file length: 2819089
error num:-6502 message: ORA-06502: PL/SQL: digital error or value
Another error has occurred. Closing file
In APEX, we see a download dialog box to open or save the file, but the download is 0 (empty) bytes. We checked the network ACLs, we checked the APEX body for print server settings, we are at a loss. Help, please.Not sure what your question is, but it works fine for me view the PDF in a page.
html text area
-------------
< object data = "f? p = & APP_ID.: 1: & APP_SESSION. ": APPLICATION_PROCESS = DO_SHO_PDF:P1_FNAME:test.pdf ' type = ' application/pdf' width ="500"height ="500"> alt: < a href =" f? " p = & APP_ID.: 1: & APP_SESSION. : APPLICATION_PROCESS = DO_SHO_PDF:P1_FNAME:test.pdf "> test.pdf < / a > < / object >"Anonymous application, pl/sql block: DO_SHO_PDF
DECLARE l_blob BLOB; l_bfile BFILE; BEGIN DBMS_LOB.createtemporary (l_blob, TRUE, DBMS_LOB.SESSION); --l_bfile := BFILENAME ('MY_DIR', 'test.pdf'); l_bfile := BFILENAME ('MY_DIR', v('P1_FNAME')); DBMS_LOB.fileopen (l_bfile); DBMS_LOB.loadfromfile (l_blob, l_bfile, DBMS_LOB.getlength (l_bfile)); DBMS_LOB.fileclose (l_bfile); OWA_UTIL.mime_header ('application/pdf', FALSE); HTP.p ('Content-length: ' || DBMS_LOB.getlength (l_blob)); OWA_UTIL.http_header_close; WPG_DOCLOAD.download_file (l_blob); EXCEPTION WHEN NO_DATA_FOUND THEN NULL; END;
The file download is similar:
HTP.p (' download the bin file < a href = "f?) p ='|| v ('APP_ID') | » : 20 :'|| v ('SESSION'): ': APPLICATION_PROCESS = DOWNLOAD_FILE:P20_BINFILE :'|| v ('P20_BINFILE'). ("" "> Download < / a > ');Anonymous application, pl/sql block: DOWNLOAD_FILE
pkg_name. SAVE_FILE;
-- snippet of pkg PROCEDURE save_file is l_blob BLOB; l_bfile BFILE; BEGIN DBMS_LOB.createtemporary (l_blob, TRUE, DBMS_LOB.SESSION); l_bfile := BFILENAME (g_tmp_dir, v('P20_BINFILE')); DBMS_LOB.fileopen (l_bfile); DBMS_LOB.loadfromfile (l_blob, l_bfile, DBMS_LOB.getlength (l_bfile)); DBMS_LOB.fileclose (l_bfile); owa_util.mime_header('application/octet', False); HTP.p ('Content-length: ' || DBMS_LOB.getlength (l_blob)); htp.p('Content-Disposition: attachment; filename="'||v('P20_DISPLAYNAME')||'"'); OWA_UTIL.http_header_close; WPG_DOCLOAD.download_file (l_blob); exception when others then htp.p(SQLERRM); END;
Published by: maceyah on March 9, 2012 15:03
Maybe you are looking for
-
Trying to upgrade an iMac mid-2010 of the last version of Mountain Lion to the latest version of El Capitan (10.11.3). Followed all the usual advice and a cleaning, a thorough update, virus scan apps, started backup via Time Machine, etc.. Download
-
How to manage the parameters of storage for my iPad?
I get an error message that my iPad storage is almost full; Yet, I still have 177GB available in iCloudl What should do? Thank you, Kay
-
When I open an email attachment, it does not open but opens the windows media library
When I opened an attachment instead of display the attachment, it opens additional windows media. I've tried right-clicking on the opening of the attachment, and then by saving the attachment to the office. It works but if I go back on the attachment
-
After a strange phone call trying to sell me a security package, I have a virus
Original title: programs network networking Internet site Internet Site Web Web Site URL of the network How can I get rid of stuxnet virus I was on the phone a lady phoned me on windows and I had a virus that we've been through a few little things on
-
I NEED A GENIUS OR BILL GATES TO HELP ME...
I CAN INSTALL MICROSOFT DIGITAL IMAGE SUITE 2006 IN MY PC... I HAVE TRIED EVERYTHING AND WINDOWS CANNOT RUN OR OPEN FOR ME.ALWAYS APPEARS a WINDOW WITH the MESSAGE "Digital Image Module detects a problem and needs to close"I tried to download from th