DMM VMWARE 5.2.3 or 5.3 cannot open 'run the task '.
Dear all,
I am facing problem when install VMWare DMM times version 5.2.3 or 5.3 when I want to open "run task" it still shows the treatment and can not go.
I don't know what is happening. I try to reinstall several times but always found same problem even I have change the machine.
I enclose the photo in this issue, so that each of you knows what page errors.
Thank you very much
Hi all
This is a known, problem if you have not configured the entire FQDN of your DMM in the 'Address of the Servlet server' field under ' Digital signs-> settings-> Server Settings.
Last documentation DMM, says it's a mandatory step:
Kind regards
Marco
Tags: Cisco Support
Similar Questions
-
Hello
I run the Web server in the os(xp pro) host and now I want to run the Web server in the guest operating system
I put things in the host operating system, follow
router setting page (shared ip settings page)
1 DHCP using OFF
2 DMZ host server using on 192.168.10.201
3. setting of virtual server 192.168.10.201 port TCP port internal external port 81 81
TCP/IP
1 use the following IP 192.168.10.201
2 gateway 192.168.10.1
3. the DNS settings of
4. on the Advanced tab > Internet connection sharing > VMware Network Adapter VMnet 8
for now, when someone tries to access my WAN IP then page host server is apear (from external network)
If I stop server Web host then cannot access my WAN IPand in VMware, I put the (Windows XP Pro)
TCP/IP configuration
1 use the following IP 192.168.88.201
2. default gateway 192.168.88.2
3. the DNS settings of
4. click the guest OS tab and click Edit > virtual network editor > NAT VMnet host is VMnet8
5. setting NAT > Port forwarding > Add >: host port 81 machine virtual ip address 192.168.88.201 port 81
and at the moment access to 192.168.88.201 in the guest operating system is ok the page is apear
but nothing is apear when try and access my WAN IP external network and if I start it the host Web server then the host page is apear that im is not the intention of
How can I make the Web server of the guest to access other networks operating system?
in the guest operating system, I can access Web server of the customer by access 192.168.10.201
but I can't access Web server of the client by typing host operating system access the 192.168.10.201
any ideas? My version of vmware's vmware-workstation - 6.5.2 for windowsHi Teayun,
Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to VMware and would be better suited to the VMware or TechNet community. Please visit the link below to find a community that will support what ask you
http://www.VMware.com/support/
http://TechNet.Microsoft.com/en-us/default.aspx Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
run the server in vmware under the router (shared ip)
Hi im using router (shared ip) and
both the host and the guest os is xp pro
now I can run the Web server on the host operating system after that I have a lot of hard work
but I want to move the guest from the host computer operating system server
in the host, what I do is
first as part of TCP/IP in wireless (since i Using the notebook with wireless)
Use the following IP address
IP address: 192.168.10.201(for pas s'écraser avec les autre ip)
Default gateway: 192.168.10.1
and put the DNS
and advanced tap goto and goto internet connection I allow YOU sharing any other user of the network to connect through the internet connection from this computer, VMware Network Adapter VMnet8
and I go to the router setup page and set the
1 DHCP OFF and
2 DMZ host IT with 192.168.10.201
and
in VMware
1 goto NAT > NAT setting >
Port forwarding > Hostport 81, address IP of Machine virtual 192.168.88.201:81But if anyone else tries to access my WAN IP they consulted the Web server of the host computer
and I don't know how can I access Barbershop Web os server from the host
Thanks in advanceHi Teayun,
Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to VMware and would be better suited to the VMware or TechNet community. Please visit the link below to find a community that will support what ask you
http://www.VMware.com/support/
http://TechNet.Microsoft.com/en-us/default.aspx Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
VMware Workstation 12.1.1 Pro is unable to install the network grows on CentOS 6.8 host
Just upgraded my 6.7 CentOS Server (where the VMware Workstation 12.1.1 worked fine) to 6.8.
After a reboot, VMware has done, it is usual thing where she wanted to reinstall its readers. He doesn't have to install the network component. Here are my logs:
2016-05-28T18:21:09.477-07:00| vthread-4| I125: Log for VMware Workstation pid=27658 version=12.1.1 build=build-3770994 option=Release 2016-05-28T18:21:09.477-07:00| vthread-4| I125: The process is 64-bit. 2016-05-28T18:21:09.477-07:00| vthread-4| I125: Host codepage=UTF-8 encoding=UTF-8 2016-05-28T18:21:09.477-07:00| vthread-4| I125: Host is Linux 2.6.32-642.el6.x86_64 CentOS release 6.8 (Final) 2016-05-28T18:21:09.476-07:00| vthread-4| I125: DictionaryLoad: Cannot open file "/usr/lib/vmware/settings": No such file or directory. 2016-05-28T18:21:09.476-07:00| vthread-4| I125: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values. 2016-05-28T18:21:09.476-07:00| vthread-4| I125: DictionaryLoad: Cannot open file "/home/sa_schewee/.vmware/config": No such file or directory. 2016-05-28T18:21:09.476-07:00| vthread-4| I125: PREF Optional preferences file not found at /home/sa_schewee/.vmware/config. Using default values. 2016-05-28T18:21:09.501-07:00| vthread-4| W115: Logging to /tmp/vmware-root/vmware-27658.log 2016-05-28T18:21:09.511-07:00| vthread-4| I125: Obtaining info using the running kernel. 2016-05-28T18:21:09.511-07:00| vthread-4| I125: Created new pathsHash. 2016-05-28T18:21:09.511-07:00| vthread-4| I125: Setting header path for 2.6.32-642.el6.x86_64 to "/lib/modules/2.6.32-642.el6.x86_64/build/include". 2016-05-28T18:21:09.511-07:00| vthread-4| I125: Validating path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for kernel release "2.6.32-642.el6.x86_64". 2016-05-28T18:21:09.511-07:00| vthread-4| I125: Failed to find /lib/modules/2.6.32-642.el6.x86_64/build/include/generated/utsrelease.h 2016-05-28T18:21:09.511-07:00| vthread-4| I125: using /usr/bin/gcc for preprocess check 2016-05-28T18:21:09.518-07:00| vthread-4| I125: Preprocessed UTS_RELEASE, got value "2.6.32-642.el6.x86_64". 2016-05-28T18:21:09.518-07:00| vthread-4| I125: The header path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for the kernel "2.6.32-642.el6.x86_64" is valid. Whoohoo! 2016-05-28T18:21:09.587-07:00| vthread-4| I125: found symbol version file /lib/modules/2.6.32-642.el6.x86_64/build/Module.symvers 2016-05-28T18:21:09.587-07:00| vthread-4| I125: Reading symbol versions from /lib/modules/2.6.32-642.el6.x86_64/build/Module.symvers. 2016-05-28T18:21:09.597-07:00| vthread-4| I125: Read 12201 symbol versions 2016-05-28T18:21:09.597-07:00| vthread-4| I125: Reading in info for the vmmon module. 2016-05-28T18:21:09.597-07:00| vthread-4| I125: Reading in info for the vmnet module. 2016-05-28T18:21:09.597-07:00| vthread-4| I125: Reading in info for the vmblock module. 2016-05-28T18:21:09.597-07:00| vthread-4| I125: Reading in info for the vmci module. 2016-05-28T18:21:09.597-07:00| vthread-4| I125: Reading in info for the vsock module. 2016-05-28T18:21:09.597-07:00| vthread-4| I125: Setting vsock to depend on vmci. 2016-05-28T18:21:09.597-07:00| vthread-4| I125: Invoking modinfo on "vmmon". 2016-05-28T18:21:09.600-07:00| vthread-4| I125: "/sbin/modinfo" exited with status 0. 2016-05-28T18:21:09.600-07:00| vthread-4| I125: Invoking modinfo on "vmnet". 2016-05-28T18:21:09.601-07:00| vthread-4| I125: "/sbin/modinfo" exited with status 256. 2016-05-28T18:21:09.601-07:00| vthread-4| I125: Invoking modinfo on "vmblock". 2016-05-28T18:21:09.603-07:00| vthread-4| I125: "/sbin/modinfo" exited with status 0. 2016-05-28T18:21:09.603-07:00| vthread-4| I125: Invoking modinfo on "vmci". 2016-05-28T18:21:09.605-07:00| vthread-4| I125: "/sbin/modinfo" exited with status 0. 2016-05-28T18:21:09.605-07:00| vthread-4| I125: Invoking modinfo on "vsock". 2016-05-28T18:21:09.607-07:00| vthread-4| I125: "/sbin/modinfo" exited with status 0. 2016-05-28T18:21:09.618-07:00| vthread-4| I125: to be installed: vmnet status: 0 2016-05-28T18:21:09.624-07:00| vthread-4| I125: Obtaining info using the running kernel. 2016-05-28T18:21:09.624-07:00| vthread-4| I125: Setting header path for 2.6.32-642.el6.x86_64 to "/lib/modules/2.6.32-642.el6.x86_64/build/include". 2016-05-28T18:21:09.624-07:00| vthread-4| I125: Validating path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for kernel release "2.6.32-642.el6.x86_64". 2016-05-28T18:21:09.624-07:00| vthread-4| I125: Failed to find /lib/modules/2.6.32-642.el6.x86_64/build/include/generated/utsrelease.h 2016-05-28T18:21:09.624-07:00| vthread-4| I125: using /usr/bin/gcc for preprocess check 2016-05-28T18:21:09.632-07:00| vthread-4| I125: Preprocessed UTS_RELEASE, got value "2.6.32-642.el6.x86_64". 2016-05-28T18:21:09.632-07:00| vthread-4| I125: The header path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for the kernel "2.6.32-642.el6.x86_64" is valid. Whoohoo! 2016-05-28T18:21:09.701-07:00| vthread-4| I125: found symbol version file /lib/modules/2.6.32-642.el6.x86_64/build/Module.symvers 2016-05-28T18:21:09.702-07:00| vthread-4| I125: Reading symbol versions from /lib/modules/2.6.32-642.el6.x86_64/build/Module.symvers. 2016-05-28T18:21:09.711-07:00| vthread-4| I125: Read 12201 symbol versions 2016-05-28T18:21:09.711-07:00| vthread-4| I125: Kernel header path retrieved from FileEntry: /lib/modules/2.6.32-642.el6.x86_64/build/include 2016-05-28T18:21:09.711-07:00| vthread-4| I125: Update kernel header path to /lib/modules/2.6.32-642.el6.x86_64/build/include 2016-05-28T18:21:09.711-07:00| vthread-4| I125: Validating path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for kernel release "2.6.32-642.el6.x86_64". 2016-05-28T18:21:09.711-07:00| vthread-4| I125: Failed to find /lib/modules/2.6.32-642.el6.x86_64/build/include/generated/utsrelease.h 2016-05-28T18:21:09.711-07:00| vthread-4| I125: using /usr/bin/gcc for preprocess check 2016-05-28T18:21:09.719-07:00| vthread-4| I125: Preprocessed UTS_RELEASE, got value "2.6.32-642.el6.x86_64". 2016-05-28T18:21:09.719-07:00| vthread-4| I125: The header path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for the kernel "2.6.32-642.el6.x86_64" is valid. Whoohoo! 2016-05-28T18:21:09.720-07:00| vthread-4| I125: Found compiler at "/usr/bin/gcc" 2016-05-28T18:21:09.724-07:00| vthread-4| I125: Got gcc version "4.4.7". 2016-05-28T18:21:09.724-07:00| vthread-4| I125: The GCC version matches the kernel GCC minor version like a glove. 2016-05-28T18:21:09.724-07:00| vthread-4| I125: Using user supplied compiler "/usr/bin/gcc". 2016-05-28T18:21:09.727-07:00| vthread-4| I125: Got gcc version "4.4.7". 2016-05-28T18:21:09.727-07:00| vthread-4| I125: The GCC version matches the kernel GCC minor version like a glove. 2016-05-28T18:21:09.729-07:00| vthread-4| I125: Trying to find a suitable PBM set for kernel "2.6.32-642.el6.x86_64". 2016-05-28T18:21:09.729-07:00| vthread-4| I125: No matching PBM set was found for kernel "2.6.32-642.el6.x86_64". 2016-05-28T18:21:09.729-07:00| vthread-4| I125: The GCC version matches the kernel GCC minor version like a glove. 2016-05-28T18:21:09.729-07:00| vthread-4| I125: Validating path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for kernel release "2.6.32-642.el6.x86_64". 2016-05-28T18:21:09.729-07:00| vthread-4| I125: Failed to find /lib/modules/2.6.32-642.el6.x86_64/build/include/generated/utsrelease.h 2016-05-28T18:21:09.729-07:00| vthread-4| I125: using /usr/bin/gcc for preprocess check 2016-05-28T18:21:09.737-07:00| vthread-4| I125: Preprocessed UTS_RELEASE, got value "2.6.32-642.el6.x86_64". 2016-05-28T18:21:09.737-07:00| vthread-4| I125: The header path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for the kernel "2.6.32-642.el6.x86_64" is valid. Whoohoo! 2016-05-28T18:21:09.738-07:00| vthread-4| I125: The GCC version matches the kernel GCC minor version like a glove. 2016-05-28T18:21:09.738-07:00| vthread-4| I125: Validating path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for kernel release "2.6.32-642.el6.x86_64". 2016-05-28T18:21:09.738-07:00| vthread-4| I125: Failed to find /lib/modules/2.6.32-642.el6.x86_64/build/include/generated/utsrelease.h 2016-05-28T18:21:09.738-07:00| vthread-4| I125: using /usr/bin/gcc for preprocess check 2016-05-28T18:21:09.746-07:00| vthread-4| I125: Preprocessed UTS_RELEASE, got value "2.6.32-642.el6.x86_64". 2016-05-28T18:21:09.746-07:00| vthread-4| I125: The header path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for the kernel "2.6.32-642.el6.x86_64" is valid. Whoohoo! 2016-05-28T18:21:09.746-07:00| vthread-4| I125: Using temp dir "/tmp". 2016-05-28T18:21:09.747-07:00| vthread-4| I125: Obtaining info using the running kernel. 2016-05-28T18:21:09.747-07:00| vthread-4| I125: Setting header path for 2.6.32-642.el6.x86_64 to "/lib/modules/2.6.32-642.el6.x86_64/build/include". 2016-05-28T18:21:09.747-07:00| vthread-4| I125: Validating path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for kernel release "2.6.32-642.el6.x86_64". 2016-05-28T18:21:09.747-07:00| vthread-4| I125: Failed to find /lib/modules/2.6.32-642.el6.x86_64/build/include/generated/utsrelease.h 2016-05-28T18:21:09.747-07:00| vthread-4| I125: using /usr/bin/gcc for preprocess check 2016-05-28T18:21:09.755-07:00| vthread-4| I125: Preprocessed UTS_RELEASE, got value "2.6.32-642.el6.x86_64". 2016-05-28T18:21:09.755-07:00| vthread-4| I125: The header path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for the kernel "2.6.32-642.el6.x86_64" is valid. Whoohoo! 2016-05-28T18:21:09.825-07:00| vthread-4| I125: found symbol version file /lib/modules/2.6.32-642.el6.x86_64/build/Module.symvers 2016-05-28T18:21:09.825-07:00| vthread-4| I125: Reading symbol versions from /lib/modules/2.6.32-642.el6.x86_64/build/Module.symvers. 2016-05-28T18:21:09.834-07:00| vthread-4| I125: Read 12201 symbol versions 2016-05-28T18:21:09.834-07:00| vthread-4| I125: Invoking modinfo on "vmnet". 2016-05-28T18:21:09.836-07:00| vthread-4| I125: "/sbin/modinfo" exited with status 256. 2016-05-28T18:21:10.081-07:00| vthread-4| I125: Setting destination path for vmnet to "/lib/modules/2.6.32-642.el6.x86_64/misc/vmnet.ko". 2016-05-28T18:21:10.081-07:00| vthread-4| I125: Extracting the vmnet source from "/usr/lib/vmware/modules/source/vmnet.tar". 2016-05-28T18:21:10.087-07:00| vthread-4| I125: Successfully extracted the vmnet source. 2016-05-28T18:21:10.087-07:00| vthread-4| I125: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-tH7bci/vmnet-only auto-build HEADER_DIR=/lib/modules/2.6.32-642.el6.x86_64/build/include CC=/usr/bin/gcc IS_GCC_3=no" 2016-05-28T18:21:11.063-07:00| vthread-4| W115: Failed to build vmnet. Failed to execute the build command.
Hi, I faced the same problem, and now I have corrected this issue.
He was vmnet.ko, at least for me.
Here's how to solve,
You can find the latest vmnet.ko of /lib/modules/~previous_kernel_version~/misc/vmnet.ko
Copy vmnet.ko into your current/lib/modules/your_current_version/misc folder.
And then run vmware, if you fail at the first, please run again.
If so, you can run vmwre!
I hope this will help you.
Good day.
-
VMware ESXi 5.5 and HP ML310e gen8 v2 lose the license and the password after restart
I've updated my HP Proliant server with the latest drivers and I have the BIOS version is here: VMware Compatibility Guide: search system
but after I entered my license in vSphere and adding a virtual machine to the host, where I am restart I lose the license, the password to connect to the host (his game empty) and all virtual machines (I have to add them manually and fix the network, because it is also reset to the default setting).
Any ideas why is this happing? I'm doing something wrong?
Other info: I have 2 hard drives put in a logical drive (Raid 1) and VmWare log does not work without saying anything...
Hello
is it a stand alone esx host? If yes try asking another key on the wmare site
hp custom image you used to install the esxi? If not download the latest version of the hp site or vmware and perform a new installation or level and keep the data store.
also update the firmware of the hp for the later levels site
-
When I run the application for protection of virtual machine data vmware backup fails and the job is running.
manually cancel the task but still appears in recent work.
can I cancel and delete the task?
Hello
Simply restart the vmware VC mgmt service which will kill all running tasks.
If you found this answer useful, please consider the use of relatively useful or Correct buttons assign points
-
VMware SRM Reprotect fails with Peer table ID provided in the SRM of entry is incorrect
I have the following Setup
Site-a.
VMware vCenter 5.1 U1
VMware SRM 5.1.1
NetApp SRA 2.0.1P2
FAS3140C - Data ONTAP 8.1.2P4
Site-B
VMware vCenter 5.1 U1
VMware SRM 5.1.1
NetApp SRA 2.0.1P2
FAS3140C - Data ONTAP 8.1.2P4
I created a Protection Group based at the A Site containing a single VM with a single vmdk disk on an NFS volume.
The NFS volume is synchronous to the Site-B
I can perform a migration scheduled to Site B, and then reprotect an another planned migration back to Site A, but then when I try to restore the reprotect again so that I am ready for an another Site-B recovery fails in the first step, configure storage for reverse Direction with " " - Failed to reverse the replication for impossible on the devices. SRA command 'prepareReverseReplication' failed. Peer table provided in the entry MRS. ID is incorrect check the newspapers RS to verify the correct peer array ID. "
I see nothing on the files or the newspaper of SRM server logs to indicate that it is.
This occurs for each Protection Group, I create this is not isolated to just this one volume. I also tried with VMFS iSCSI volumes and get exactly the same results.
If I create a Protection on the Site-B group I can get back to the Site-A and will not restore to fail to Site-B.
Initially, I look that the issue I saw is that I could do a backspace, but could not perform a second reprotect because the SnapMirrors were left in the State of evil, but now I see that the problem is that I can't make a reprotect from Site A to Site B.
I completely uninstalled SRM in both places, removed from the SRM database on both sites and started again but always get the same question.
I actually IBM N series-N6040 controllers and uses IBM Data ONTAP and SRA. brand got a call open with VMware and IBM but not very far.
Has anyone seen this problem before and got a solution?
Now, I've identified what causes this problem and can work around it until there is a fix of NetApp.
The issue was the name of the file on the recovering Site Server had the same name as the file server on the Site protected with a prefix to the subject, which in my case the recovering Site go was named NSERIES01 and the protection of the Site was DRNSERIES01. Don't forget that I had already performed a failover and restoration for the protection of the Site was my original recovery Site, so yes give it the site protected for this Protection Group is DRNSERIES01 and the recovering Site has NSERIES01 on this.
Using the task Reprotect is the first step is to call the SRA with the command prepareReverseReplication, which calls reverseReplication.pl, which is trying to verify the SnapMirror is broken. It gets the status of all the SnapMirrors run on the recovering Site, which in this case NSERIES01. It then goes through each of them looking for a match of the local-spin-name section: volume-name of the source of the snapmirror, for example for my test group was trying to match NSERIES01:NFS_VMware_Test, at this stage of the source of the SnapMirror is DRNSERIES01:NFS_VMware_Test which is correct, but because the script uses a pattern matching test it corresponds to NSERIES01 : NFS_VMware_Test to DRNSERIES01:NFS_VMware_Test as NSERIES01:NFS_VMware_Test is contained in DRNSERIES01:NFS_VMware_Test. It then checks if the destination of the snapmirror corresponds to the peerArrayID (that is, in this case DRNSERIES01) he does not like the destination, properly, is NSERIES01, and then reports that the peerArrayID is incorrect. If there is no match on the local-spin-name: volume-name of the source of the snapmirror, then he continues to check the destination of the snapmirror, and when it finds a match, it checks if the peerArrayID is the source of the SnapMirror, and if it checks the State of the SnapMirror is broken off.
I've never touched the issue with the first reprotect because DRNSERIES01:NFS_VMware_Test is not contained in the source of the SnapMirror (NSERIES01:NFS_VMware_Test) and so it will be the next test of verification of the DRNSERIES01:NFS_VMware_Test in the destination of the SnapMirror, that he finds and then checks the DRNSERIES01 against the destination which is also to and finally confirms that the relationship of SnapMirror is broken-off.
I had changed the volume on DRNSERIES01 a while ago because I thought that the question could have because of the volume being names the same, but I had changed with a suffix of _Repl on the end and so the script was always corresponding to NSERIES01:NFS_VMware_Test to _ReplNSERIES01:NFS_VMware_TestDR.
I have now set my group of test as follows:
Protected site
Name of the file server = NSERIES01
Volume name = NFS_VMware_Test_HMR
Recovery site
File name = DRNSERIES01
Volume name = NFS_VMware_Test_EWC
I can now get on the Site recovery, Reprotect, restoration, Reprotect and Fail-over again and continue achieving recoveries and reprotect again and again as often as you can re - save on VHS of Scotch tape!
If the file on the Site B server had a suffix on its name instead of a prefix, for example, it was named NSERIES01DR, or had a name completely different then I would never hit this bug in the SRA. I'll wait for NetApp fix SRA. In the meantime I will be renaming all my volumes on the site of recovery as well as to avoid this problem.
-
New in vmware, error cannot open parent vmdk.help, edit vmdk.file, please
Please I have the error message on: cannot open parent vmdk.
Please can someone help me? the virtual disk file name I wan Edit is = "fr_windows_7_ultimate_x64_dvd_X15-65928-000026 - s001.vmdk.
Here is the file descriptor:
criptorFile
version = 1
Encoding = "windows-1252".
CID = aad2e91e
parentCID = 14e7cc00
isNativeSnapshot = 'no '.
createType = "monolithicSparse.
parentFileNameHint = "fr_windows_7_ultimate_x64_dvd_X15-65928 - 000025.vmdk.
# Description of the measure
RW 125829120 CLAIRSEMES ' fr_windows_7_ultimate_x64_dvd_X15-65928-000026 - s001.vmdk.
# The database disk
#DDB
ddb.toolsVersion = "9282.
ddb.longContentID = "5c0253c37a15c8025a7240daaad2e91e".
DDB. UUID.image = "d9cf437f-ce5a-44c5-a2fc-ae827d943fbd".
DDB. UUID.modification = "08a3938b-5104-48d7-a7c2-3ae24c927d05".
DDB. UUID.parent = "00000000-0000-0000-0000-000000000000".
DDB. UUID.parentmodification = "00000000-0000-0000-0000-000000000000".
DDB. Geometry.Cylinders = "0"
DDB. Geometry.Heads = "16"
DDB. Geometry.sectors = "63"
Do you do the thing that is supposed to be the name of the parent file:
parentFileNameHint = "fr_windows_7_ultimate_x64_dvd_X15-65928 - 000025.vmdk.
or
parentFileNameHint = "fr_windows_7_ultimate_x64_dvd_X15-65928 - 000026.vmdk.
And do you something that is supposed to be the description of the measure:
RW 125829120 SPARSE "fr_windows_7_ultimate_x64_dvd_X15-65928 - 000026.vmdk.
Or
RW 125829120 CLAIRSEMES ' fr_windows_7_ultimate_x64_dvd_X15-65928-000026 - s001.vmdk.
Do you things that my vmdk.files is corrupted?
Thank you.
try this link to verify and re-create the file discriptor above...
-
Ouch. I just started to do some Win Phone 8 and development Win, and all simulators are needed for development.
This means that a dev to Win8 may only work on their host... I'm sure it would work in a virtual machine.
Can I make for happy? (Hyper V might have to win here... sigh).
VMware Workstation and Hyper-V are not compatible. Remove the Hyper-V system role before running VMware Workstation
Once you install the Hyper-V role on your host, your host is no longer running Windows 8 as the native operating system. It runs Hyper-V as the native operating system, and Windows 8 runs as OS management within a privileged under Hyper-V VM. With the Hyper-V role installed, * everything * runs in a virtual machine under Hyper-V.
So to run a virtual machine under my computer in Windows 8 under Hyper-V, you must be able to run a nested VM. It's possible with Hyper-V, the hypervisor host, but with the updates in custody, I mentioned above.
-
Cannot open the exe of Vmware workstation
Hi all, thanks for reading this post.
I have a file called vmware-workstation-full - 7.0.0 - 203739.exe which, once clicked is not installed.
I have norton product of internet security in 2012. I also disabled but not luck.
Pls let me know any solution? Previously, I had VMware installed, but later I uninstalled it.
Thank you
Buxant
Welcome to the community,
If nothing seems to happen at all when you start the installation, open the Task Manager and check if there is a process of "fixcamera.exe". If so kill this process and begin the installation. If this isn't the case, the first step to solve the problems is to verify the signature of the downloaded installation package MD5.
André
-
Cannot turn on the virtual machine in VMware workstation
Hello
I have windows 2008 stocked VM of windows 4.1.Inside ESX VM 2008 I installed VMware workstation and created the virtual machine in vmware workstation. When I have tride to power on the VM iam getting error below. Please help me.
"Running vmware workstation in a virutal machine requires external thr virtual machine is configured to run the vmware esx host operation system.you may not power on a vierutal machine until the external virtual machine is reconfigured.
Thank you
Victor
This is the VM vmx nested - you must add this line to the external virtual machine - one who runs in ESXi
-
Run the VMware vSphere architecture
Hello all experts!
I downloaded - VMware ESXi Installable & * VMware
Server that complement the vSphere VMware vCenter architecture... today
do next should I do to make them work...? *
Thanks in advance!
You could start with the VMware ESX 4, update 1, getting started Guide reading, then the VMware ESX 4 and vCenter 4 Installation Guide, update 1. This will prepare you for the installation of the software which will of course be the next step.
Best regards, Robert
Post edited by: RvdNieuwendijk
-
VMware Workstation 7 - why my PC freezes when opening a virtual machine?
I used workstation 7.0 on my laptop Lenovo T400 of windows 7 for a month or two without any problems.
Then a couple of days Workstation started OK but every time an attempt to open an image vmware of the laptop screen and the keyboard & mouse 'freeze' - no error message. I have to hold the power button / stop down to the laptop.
The same vmware image works fine on another PC.
I had some trouble uninstalling workstation initially-, but using the vnware uninstall tool I was able to uninstall and reinstall the post work - but still cannot open one of my images without the laptop freezing vm.
I tried to install workstation 7.1 and vmware player 3.1 separately and they will appear to install (and uninstall) without problem - just can't open VM images. One thing I noticed is that when you reinstall workstation/vmware player - I can't find the adapter vmnet1 and vmnet8 at all. When you run vmnetcfg.exe, it seems to think vmnet1 & vmnet8 are there but they do not arise with ipconfig/all-command.
Made a full chkdsk of the hard drive to find errors and a test of the RAM mem - everything was OK.
Any help/advice would be much appreciated.
John,
I think it is most likely the result of the HW drivers updated being installed on the laptop. I had this situation happen to me recently, my Intel Wifi driver has been updated and would crash my PC every time my computer was running and the laptop was trying to go to sleep, then wake up. I found a new version that seems to have corrected the problem.
Windows 7 has a great utility called the monitor of reliability for these situations. If you presents a history of reliablity per day and more important still, tells you what happened day. For example, on 6/7 you updated your Wifi driver and then for the next week you can see that your reliability rating is down to 5, every day since. :
http://www.AddictiveTips.com/Windows-tips/Windows-7-reliability-monitor/
-MattG
If you find this information useful, please give points to "correct" or "useful".
-
I have download ESXi 3.5 VMware site, write on CD, but unable to boot from the CD, why? ESXi installation does not occur.
Please help on this issue.
Since there is no integration PAM for ESXi, you cannot authenticate to ESXi itself using active directory. -What are you talking about? You can always have virtual machine with windows and active directory.
-KjB
VMware vExpert
-
I tried to install VMWare Server for the past few hours now, but nothing helped. I use Ubuntu 8.10.
I have already patched, had to move manually the files, and now I'm here:
VMware
VMware is installed, but it has not been configured (correctly)
for this system. To (re-) set, invoke the following command:
usr/bin/vmware-config.pl.
root@xxxxxx-laptop: /usr/bin/vmware-config.pl
Ensuring services for VMware Server are stopped.
Stopping VMware services:
Virtual machine monitor makes
Networks bridged on/dev/vmnet0 made
Server DHCP on/dev/vmnet1 did
Guest network only on/dev/vmnet1 made
Server DHCP on/dev/vmnet8 is
NAT service on/dev/vmnet8 is
Guest network only on/dev/vmnet8 is
Virtual Ethernet is
Configure libraries GTK + 2.4 relief.
In which directory you want to install the mime type icons?
This directory contains your desktop menu input files? These files have a
.desktop file extension. / usr/share/applications
In which directory you want to install the application icon?
/usr/share/applications/VMware-Server.desktop: warning: value ' vmware - server.png ' key 'Icon' in the group "Desktop Entry" is an icon of name with an extension, but there should be no extension as described in the icon theme specification if the value is not an absolute path
/usr/share/applications/VMware-console-URI-handler.desktop: warning: value ' vmware - server.png ' key 'Icon' in the group "Desktop Entry" is an icon of name with an extension, but there should be no extension as described in the icon theme specification if the value is not an absolute path
Try to find a vmmon module suitable for your running kernel.
None of the vmmon modules pre-built for VMware Server is suitable for your
kernel running. Do you want this program to try to build the vmmon module for
your system (you must have a C compiler installed on your system)?
Using compiler "/ usr/bin/gcc". Environment variable CC to override.
What is the location of the directory of C header files that match your running
kernel? /lib/modules/2.6.27-11-generic/build/include
Extract the sources of the vmmon module.
The construction of the vmmon module.
Building for VMware Server 1.0.0.
Using 2.6.x kernel build system.
do: enter the directory ' / tmp/vmware-config4/vmmon-only '.
do /lib/modules/2.6.27-11-generic/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD. modules of
make [1]: Entering directory ' / usr/src/linux-headers-2.6.27-11-generic'
CC /tmp/vmware-config4/vmmon-only/linux/driver.o
CC /tmp/vmware-config4/vmmon-only/linux/driverLog.o
CC /tmp/vmware-config4/vmmon-only/linux/hostif.o
/tmp/vmware-config4/vmmon-only/linux/hostif.c: in function 'HostIF_SetFastClockRate ':
/tmp/vmware-config4/vmmon-only/linux/hostif.c:3441: warning: argument passing "send_sig" 2 rejects the characterization of target of pointer type
CC /tmp/vmware-config4/vmmon-only/common/comport.o
CC /tmp/vmware-config4/vmmon-only/common/cpuid.o
CC /tmp/vmware-config4/vmmon-only/common/hash.o
CC /tmp/vmware-config4/vmmon-only/common/memtrack.o
CC /tmp/vmware-config4/vmmon-only/common/phystrack.o
CC /tmp/vmware-config4/vmmon-only/common/task.o
cc1plus: WARNING: command line option "- Werror - implicit-function-declaration" is valid for C/ObjC but not for C++
cc1plus: WARNING: command line option ' - Wdeclaration - apres-declaration "is valid for C/ObjC but not for C++
cc1plus: WARNING: command line option ' - Wno - pointer-sign "is valid for C/ObjC but not for C++
cc1plus: WARNING: command line option ' - Wstrict - prototypes "are valid for Ada/C/ObjC but not for C++
In file included from /tmp/vmware-config4/vmmon-only/common/task.c:1195:
/tmp/vmware-config4/vmmon-only/common/task_compat.h: function ' void Task_Switch_V45 (VMDriver *, Vcpuid)':
/tmp/vmware-config4/vmmon-only/common/task_compat.h:2667: warning: 'sysenterState.SysenterStateV45::validEIP' may be used uninitialized in this function
/tmp/vmware-config4/vmmon-only/common/task_compat.h:2667: warning: 'sysenterState.SysenterStateV45::cs' may be used uninitialized in this function
/tmp/vmware-config4/vmmon-only/common/task_compat.h:2667: warning: 'sysenterState.SysenterStateV45::rsp' may be used uninitialized in this function
/tmp/vmware-config4/vmmon-only/common/task_compat.h:2667: warning: 'sysenterState.SysenterStateV45::rip' may be used uninitialized in this function
CC /tmp/vmware-config4/vmmon-only/common/vmciContext.o
CC /tmp/vmware-config4/vmmon-only/common/vmciDatagram.o
CC /tmp/vmware-config4/vmmon-only/common/vmciDriver.o
CC /tmp/vmware-config4/vmmon-only/common/vmciDs.o
CC /tmp/vmware-config4/vmmon-only/common/vmciGroup.o
CC /tmp/vmware-config4/vmmon-only/common/vmciHashtable.o
CC /tmp/vmware-config4/vmmon-only/common/vmciProcess.o
CC /tmp/vmware-config4/vmmon-only/common/vmciResource.o
CC /tmp/vmware-config4/vmmon-only/common/vmciSharedMem.o
CC /tmp/vmware-config4/vmmon-only/common/vmx86.o
CC /tmp/vmware-config4/vmmon-only/vmcore/compat.o
CC /tmp/vmware-config4/vmmon-only/vmcore/moduleloop.o
LD /tmp/vmware-config4/vmmon-only/vmmon.o
Construction modules, step 2.
MODPOST modules 1
WARNING: modpost: vmmon.ko module uses the marked "init_mm" symbol is not USED
CC /tmp/vmware-config4/vmmon-only/vmmon.mod.o
LD /tmp/vmware-config4/vmmon-only/vmmon.ko
make [1]: leaving directory ' / usr/src/linux-headers-2.6.27-11-generic'
CP f vmmon.ko. /... vmmon.o
make: leaving directory ' / tmp/vmware-config4/vmmon-only '.
The module loads perfectly in the kernel running.
This program already created the file/dev/vmmon and was about to remove
He someone else apparently already made.
You have already setup network.
You want to skip the network configuration and keep your old settings as they are?
Extract the module vmnet sources.
tar: /usr/lib/vmware/modules/source/vmnet.tar: cannot open: no such file or directory
tar: error is not recoverable: leave now
Unable to decompress the "/ usr/lib/vmware/modules/source/vmnet.tar" file in the
directory ' / tmp/vmware-config4.
For more information about how to troubleshoot module, please
visit our Web site at " " http://www.VMware.com/download/modules/modules.html "and "
" http://www.VMware.com/support/reference/Linux/prebuilt_modules_linux.html ". "
The execution is canceled. [/ b]
I know that vmnet.tar was here before... and he suddenly disappeared. How do we do it back, or can I download it somewhere? Thank you.
A little worrying that this file should simply disappear - never happened on any of my guests. Check the logs, etc. for possible reasons. You get also warnings much more when you run vmware - config.pl I've ever encountered. What files did you manually have to move?
If you download the tarball, extract the file from here and place it in the folder "/ usr/lib/vmware/modules/source", then you should probably go further. Should also be vmci.tar, vmnet.tar and vsock.tar in there.
---
If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.
Maybe you are looking for
-
Is Portege Z830 evolutionary (PT224V) of windows 8?
Hello I've looked everywhere in the Toshiba site to find if my laptop is upgradeable or not I looked on this page http://www.toshibamea.com/Windows8Compatibility.aspx?PageID=2895 but he said nothing on my laptop. Also, I live in the Middle East and i
-
I have a simple sub that has a loop For with the usual index. I want to move the index for the main program of vi and first pasing experienced by a cable output and Connector for the sub. However, the index does not pass because the loop is occupied
-
Why the internet keep disconnecting?
I get on the internet and it disconnects automatically
-
Compass of blackBerry Smartphones
I loaded professional compass and it is downloaded to my phone but I can't activate it. Help! Peter Thompson
-
Also when I try to remove programs to remove programs in the Control Panel, it says that the system administrator will not grant me access to uninstall that particular program or one incidentally, what precautions should I take in order to remove the