DMP status down on DMM

Hi all

I came today to see that most of the players on DMM's status down.

DMM version: 5.2.2

The DMP version: 5.2.3

After checking, I noticed that the certificate installed in the DMP are expired.

Can you show me how I can solve the problem?

Thank you.

In theory your DMM and DMP must always be at the same level of output. I suggest you upgrade your DMM to 5.2.3 first. Then use the 5.2.3 patch to fix this problem.

Take care

Tags: Cisco Support

Similar Questions

AP 1131ag 802. 11 a Oper status = down

I have a Cisco WLC 2106 and 1131ag Access Point. The 802. 11a / g Radio 'Operational status' = down. All the other radios that are on the RISE. I wonder if this is a normal behavior that none of the clients are connecting to it on the 802. 11a / g Radio. Can we confirm or provide assistance with the fix.

Thank you

On the homepage, click the "Détails" link under all items. Choose the AP make sure under status choose 'Activate' in the menu dropdown.

When you console in the AP, are you sure it is down/down and not zero/down reset?

DMM does not see the DMP

We run #5.2 side DMM and DMP. The DMM > digital media player > DMP Manager > status = X. The DMM does not see the DMP. By clicking on the discovery of the DPM and the State has not changed.

The DPM is configured to accept the central maanagement, the DMM is configured with the IP and MAC address. It worked in the last days, and I don't remember any changes that might trigger this behavior.

The last time that I could "communicate" DPM has been: I downloaded a presentation which included a URL that pointed to one of the video inside the DPM.

file:///tmp/FTPRoot/usb_1/Bluefox_Cisco.mpg.

No idea what happened? The above URL is valid? How can I discover the DMP?

Thank you

Andras

Andras,

Thanks for the update!

Please let this issue answered\resolved...

Thank you

T.

Status of the host down to DB OAM nodes
Hi all

I see that my host db node status is displayed in red (bottom) in OAM but our database and listener is running.
AppsVer:r12.1.1

OS LInux 5

What would be the reason?

Thank you
Maverick

Published by: Maverick on November 23, 2011 14:06
Salvation;

Have you checked under the lead of research that is posted by Hussein snoussi

simultaneous treatment of status down to the OAM

Respect of
HELIOS

No Satellite A660-1DW no available connection & the State of the map down

Hello

Earlier this evening, I closed my laptop, its implementation mode 'sleep', while the battery is dead in mode 'sleep'. When I opened my machine up once again to go online (via radio) icon wireless (bottom left of the screen), showed a red x over the bars, declaring (unrelated - No. connections available)

The symbol wireless between the speakers and next to the power button is on, but when I press FN + F8, it indicates "wireless communication is disabled. Please activate the Wireless Communication switch.
Also, the wireless light on the right side of my laptop is not on.

When I click "Troubleshoot" he says just "turn wireless capability", but it is already on!

There is no problem with my router or modem that I can not connect my HTC Desire phone, through the same wireless connection.

"When I open my Toshiba Board and go to Wireless & network, and then he said:" adapter status: Down "the doctor to connectivity and Wireless Lan ' Type 80211" wireless

I tried to uninstall the adapter and drivers, don't know if I done this properly and reinstalled but it still doesn't work. I also tried a restore of the system again, did not work.

Any ideas, or specific details / I need to give to allow anyone to find a solution.

p.s. I can connect via ethernet cable.

Post edited by: mtait28

Hay buddy

Please note that person don't sit at home and wait for new assignments to answer. Your ad is a few days here and sooner or later, someone will react and write an own opinion.
I know that several other forums Toshiba where you can wait for weeks and no one will write a Word so please stay cool.

On this virtual path, it is not easy to say what may be the problem. What you need to do is to restart windows and also of your router. After restarting windows enable WLAN card and sweep the area to see if your WLAN will be visible.

Also check if the wireless adapter is listed and installed in Device Manager. According to specification for laptop, your laptop has Broadcom BCM94313 WLAN card inside. Latest version of the driver you can find on http://aps2.toshiba-tro.de/wlan/?page=downloads

WebLogic Server down on OEM Cloud Control

Hello
I have my 12.1.0.2 cloud control. I installed the plug-in of GoldenGate and after that I get alert suite which means my weblogic server is broken on my cloud of OEM will.
```
Host=SGPvPSCC12c.ap.datahost.int
Target type=Oracle HTTP Server
Target name=/EMGC_GCDomain/instance1/ohs1<https://SGPvPSCC12c.ap.datahost.int:7802/em/redirect?pageType=TARGET_HOMEPAGE&targetName=%2FEMGC_GCDomain%2Finstance1%2Fohs1&targetType=oracle_apache>
Categories=Availability
Message=The Oracle HTTP Server instance is down<https://SGPvPSCC12c.ap.datahost.int:7802/em/redirect?pageType=sdk-core-event-console-detailEvent&issueID=ED53896CA3EE5FD5E043350019AC1CB7>
Severity=Fatal
Event reported time=Dec 12, 2013 5:32:01 PM SGT
Target Lifecycle Status=Production
Platform=x86_64
Line of Business=Data Centre
Operating System=Linux
Event Type=Target Availability
Event name=Status
Availability status=Down<https://SGPvPSCC12c.ap.datahost.int:7802/em/redirect?pageType=sdk-core-avail-status-overview&timePeriod=byDay&target=%2FEMGC_GCDomain%2Finstance1%2Fohs1&type=oracle_apach
e>
Rule Name=Rule set for production group PROD,Rule 1 Event Target Down
Rule Owner=GRIDMGR
Update Details:
The Oracle HTTP Server instance is down
```
Here, I have a few questions.
(1) if my weblogic is down, why my CC OEM works great and all alerts are coming? What is the reason that we have weblogic on our OEM Cloud control, which is a prerequisite to install CC OEM? What is the purpose of this weblogic moving downwards as you can see above the alert. What happens if I don't start the weblogic?
(2) how to start the weblogic (HTTP). Do I need a name of user and password to start this?
(3) what is the sequence to start OEM CC after rebooting a server (DB->->-> agent WHO Weblogic) is this correct order?
Thank you

(1) start by checking if the WebTier really down. See the instructions in the following MOS note:

EM 12: status of Enterprise Manager 12.1.0.2 command displays the WebTier Cloud is down even if the WHO's and Running (Doc ID 1561468.1)

Note: If the version of your WebTier (Oracle HTTP Server) is 11.1.1.6, it is recommended that you apply the patch 13490778 to avoid false alerts on Oracle HTTP server (status).

(2) the OPINION score above includes instructions to start the Oracle HTTP Server (e.g. ohs1) with the command opmnctl. Also, when you run the command "emctl start who", the WebTier will be launched before the WHO. Thus, if restarting of the WHO is not a problem, you can run ' emctl who all stop "to stop all processes including the WebTier WHO, then run"emctl start CMS"to restart as well AS of the WebTier.

(3) see the following doc for instructions on starting the components of EM12c:

Start and stop of the Enterprise Manager components

By default, the WHO and the agent are started automatically at startup of the host.

I hope this helps.

-Loc

three questions on DMP4400 + DMM5. 2

Hi all

I did 3 issues for the system in question,

(1) "play in the future" does not, the java machine installed and updated, but it's in another language in the browser, can that be a problem?

(2) to display on the screen via the DMP GHTS, I need to download with FTP, using the Manager of the DMP - I need to select an Action for the

Download FTP and then the DMP restarts. but the downloaded content (presentation or playlist stored in/tmp/usb_1) is not displayed automatically, I have to

Select another Action "(aller à) the URL", then select the LOCAL-presentation/playlist and computer starts playing. "

is there a way to automatically display the content downloaded immediately after reboot?

((3) like I said on 2) is the only way I found to display the content on the DPM download, because if I try to 'Play now' a playlist in the Calendar menu, nothing happens. I select "digital signage" of the same type Sytem, then I select the playlist/presentation to view and submit.

but nothing happens.

can it be linked to the lack of WAAS and CNSE services?

Thank you very much!

1.

* What is your browser Language\regional settings the value?

The locale must be English / U.S.

If the browser is not set to "English / U.S." it is most likely

the problem.

2.

I have attached a few documents that will help you

This task.

If you had access to a Manager (DMM) digital media with a

Digital Signage Module (DSM), you can do the following

Steps to follow:

* Add the element of multimedia content to the media library on the digital

Media Manager (DMM) - digital display Module (DSM)

* Create a Playlist or a presentation with this point of multimedia content

* Go to the DMM - DSM, tab under ADVANCED TASKS, select it

Type of application 'transfer DPM file or server '.

* Select 'add new Application '.

-Select the appropriate presentation or the Playlist

-Press the button "select the Application".

-Press the button 'send '.

* Once the "transfer DPM file or server" is added, you can run

This task to copy the content locally to the DMP.

-Go to the Manager of DMP of DMM - DSM and select the desired DMP

-Under the Actions drop-down, select "transfer DPM file or server" task

you have created and click GO.

-Files copy the presentation or the selected playlist (s) DMP information.

DMM - DSM will GENERATE a "URL entry (go to)" in the advanced tasks. "

To see the URL PATH & name of the "File Transfer...". "Task, go to

DMM - DSM, under the TASKS ADVANCED tab select the Type of request "entry URL (go to)" "

and he will give the NAME 'LOCAL-' playlist\presentation name list.

-Select 'change '.

-Save the path of URL LOCAL

That is to say. file:///tmp/FTPRoot/usb_1/deployment/xTAS-core/API/XML/app/playlist/http_pull_86_start_playlist_85_.htm

* You can RUN this task LOCALLY using the DMP-Device Manager (DM) or under the action

Drop down on the DMP DMM Manager - DSM.

Also, check out:

Display or stop the video content of a file stored on your DMP:

http://www.Cisco.com/en/us/docs/video/digital_media_systems/5_x/5_1/DMP/user/guide/DMPDMcfg.html#wp1055640

Reference of the user interface: items to play the video stored locally:

http://www.Cisco.com/en/us/docs/video/digital_media_systems/5_x/5_1/DMP/user/guide/DMPDMcfg.html#wp1094995

****************************

If you do NOT access to a Manager (DMM) digital media with a

Digital Signage Module (DSM), you can use a custom HTML file

or JAVA Script to use for a local video Playlist files stored.

Note: This method is NOT officially supported and the Cisco TAC

support no problems with the DMP regarding javascript

or the custom HTML format.

Extracting files the following example HTML:

-------------------------------------------

The "Local-mpg - file.pdf" is a sample of HTML code which plays

the locally stored video files: mpg Local - file.PDF

The "Local-mpg - http.pdf" is a sample of HTML code which plays

the video remote files that are located on a Web server: Local-mpg - http.pdf

Note: The '. '. HTML file"& video content files must

for be ftpd on the storage device locally on the DMP (s).

Hi all. Could someone tell me how to turn off and turn on the CISCO 52 "LCD control using RS232 to play in the future

Hello

Im working in Cisco DMS & IPTV.

IM facing a problem with 4400 DMP & 5.2.2 DMM.

I want to control CISCO 52 inch LCD using the 4400 G DMP. I am able to power on LCD screens remotely through the DMM off. Also, I am able to schedule for turning off the voltage & power on the LCD for a short number of days as for 3 or 4 days.

but I can't program it to play in the future for a month.

My requirement is this: I want to turn off the LCD screen during the downtime in my office to customers. I want to plan the screen to running from 07:00 to 18:00 I want to turn on my LCD from 18:00 to 06:00. I want to this appendix for 1 or 2 months of long in one fell swoop.

good answer as soon as possible.

Hello Peter,.

You will need to add 2 separate events in the appropriate groups of dmp.

You need to power the LCD screen will be to be repeated on a daily basis with the desired stop time.

The second will be for LCD power supply using the same methodology as the first.

The catch here, what if your client's Office is open only 5 or 6 days a week, you need to define the events above for each work day, BUT each event must be repeated in every week (not every day).

Authentication (Windows Server 2013) AD Cisco ISE problem

Background:

Has deployed two Cisco ISE 1.1.3. ISE will be used to authenticate users wireless access admin WLC and switches. Database backend is Microsoft running on Windows Server 2012 AD. Existing Cisco ACS 4.2 still running and authenticate users. There are two Cisco WLCs version 7.2.111.3.

Wireless users authenticates to AD, through works of GBA 4.2. Access admin WLC and switches to the announcement through ISE works. Authentication with PEAP-MSCHAPv2 access and admin PAP/ASCII wireless.

Problem:

Wireless users cannot authenticate to the announcement through ISE. This is the error message '11051 RADIUS packet contains invalid state attribute' & '24444 Active Directory failed because of an error that is not specified in the ISE'.

Conducted a detailed test of the AD of the ISE. The test was a success and the result seems fine except for the below:

xxdc01.XX.com (10.21.3.1)

Ping: 0 Mins Ago

Status: down

xxdc02.XX.com (10.21.3.2)

Ping: 0 Mins Ago

Status: down

xxdc01.XX.com

Last success: Thu Jan 1 10:00 1970

March 11 failure: read 11:18:04 2013

Success: 0

Chess: 11006

xxdc02.XX.com

Last success: Fri Mar 11 09:43:31 2013

March 11 failure: read 11:18:04 2013

Success: 25

Chess: 11006

Domain controller: xxdc02.xx.com:389

Domain controller type: unknown functional level DC: 5

Domain name: xx.COM

IsGlobalCatalogReady: TRUE

DomainFunctionality: 2 = (DS_BEHAVIOR_WIN2003)

ForestFunctionality: 2 = (DS_BEHAVIOR_WIN2003)

Action taken:

Log Cisco ISE and WLC by using the credentials of the AD. This excludes the connection AD, clock and AAA shared secret as the problem.

(2) wireless authentication tested using EAP-FAST, but same problem occurs.

(3) detailed error message shows below. This excludes any authentication and authorization policies. Even before hitting the authentication policy, the AD search fails.

12304 extract EAP-response containing PEAP stimulus / response

11808 extracted EAP-response containing EAP - MSCHAP VERSION challenge response to the internal method and accepting of EAP - MSCHAP VERSION such as negotiated

Evaluate the politics of identity

15006 set default mapping rule

15013 selected identity Store - AD1

24430 Authenticating user in Active Directory

24444 active Directory operation failed because of an error that is not specified in the ISE

(4) enabled the registration of debugging AD and had a look at the logging. Nothing significant, and no clue about the problem.

(5) wireless tested on different mobile phones with the same error and laptos

(6) delete and add new customer/features of AAA Cisco ISE and WLC

(7) ISE services restarted

(8) join domain on Cisco ISE

(9) notes of verified version of ISE 1.1.3 and WLC 7.2.111.3 for any open caveats. Find anything related to this problem.

10) there are two ISE and two deployed WLC. Tested a different combination of ISE1 to WLC1, ISE1 to WLC2, etc. This excludes a hardware problem of WLC.

Other possibilities/action:

1) test it on another version WLC. Will have to wait for approval of the failure to upgrade the WLC software.

(2) incompatibility between Cisco ISE and AD running on Microsoft Windows Server 2012

Did he experienced something similar to have ideas on why what is happening?

Thank you.

Update:

(1) built an another Cisco ISE 1.1.3 sever in another data center that uses the same domain but other domain controller. Thai domain controller running Windows Server 2008. This work and successful authentication.

(2) my colleague tested in a lab environment Cisco ISE 1.1.2 with Windows Server 2012. He has had the same problem as described.

This leads me to think that there is a compatibility issue of Cisco ISE with Windows Server 2012.

Yes, it seems that 1.1.3 doesn't support Server 2012 as of yet.

External identity Source OS/Version

Microsoft Windows Active Directory 2003 R2 32-bit and 64-bit

Active Directory Microsoft Windows 2008 32-bit and 64-bit

Microsoft Windows Active Directory 2008 R2 64-bit only

Microsoft Windows Active Directory 2003 32-bit only

http://www.Cisco.com/en/us/docs/security/ISE/1.1/compatibility/ise_sdt.PDF

DMVPN questions - IPsec packets

Hi all

Currently, I am configuring DMVPN for the first time. I followed the guide to configuring cisco and Googling a bit other strands however seems to have hit a brick wall.

The Setup is in a lab environment, so I can post as much information as required, but here's the important bits:

I have 3 routers Cisco 2821 running IOS 12.4 (15) with a layer 3 switch in the Middle connecting ports 'wan' together. the routing works fine, I can ping to each of the other router router.

Excerpts from the hub router config:

crypto ipsec transform-set DMVPN_SET esp-3des esp-md5-hmac

crypto ipsec profile DMVPN_PRJ

set transform-set DMVPN_SET

interface Tunnel0

bandwidth 10000

ip address 172.17.100.1 255.255.255.0

no ip redirects

ip mtu 1500

ip nhrp authentication secretid

ip nhrp map multicast dynamic

ip nhrp network-id 101

ip nhrp holdtime 450

ip tcp adjust-mss 1460

tunnel source GigabitEthernet0/0

tunnel mode gre multipoint

tunnel key 10101

tunnel protection ipsec profile DMVPN_PRJ

interface GigabitEthernet0/0

description HQ WAN

ip address 1.1.1.1 255.255.255.248

ip nat outside

ip virtual-reassembly

duplex auto

speed auto

and here's the config on the first router spoke:

crypto ipsec transform-set DMVPN_SET esp-3des esp-md5-hmac

crypto ipsec profile DMVPN_PRJ

set transform-set DMVPN_SET

interface Tunnel0

bandwidth 3000

ip address 172.17.100.10 255.255.255.0

no ip redirects

ip mtu 1500

ip nhrp authentication secretid

ip nhrp map 172.17.100.1 1.1.1.1

ip nhrp map multicast 1.1.1.1

ip nhrp network-id 101

ip nhrp holdtime 450

ip nhrp nhs 172.17.100.1

ip tcp adjust-mss 1460

tunnel source GigabitEthernet0/0

tunnel mode gre multipoint

tunnel key 10101

tunnel protection ipsec profile DMVPN_PRJ

interface GigabitEthernet0/0

description Site 1 WAN

ip address 11.11.11.1 255.255.255.248

ip nat outside

ip virtual-reassembly

duplex auto

speed auto

If I closed/no farm tunnel0 on RADIUS 1 interface, I get the following error on the hub router:

Mar 30 13:41:17.075: %CRYPTO-4-RECVD_PKT_NOT_IPSEC: Rec'd packet not an IPSEC packet.
(ip) vrf/dest_addr= /1.1.1.1, src_addr= 11.11.11.1, prot= 47

so I feel im lack some config on the side talking to encrypt the traffic, but I'm not sure what.

Here's the output router spoke:

RTR_SITE1#sh dmvpn detail

Legend: Attrb --> S - Static, D - Dynamic, I - Incompletea

N - NATed, L - Local, X - No Socket

# Ent --> Number of NHRP entries with same NBMA peer

-------------- Interface Tunnel0 info: --------------

Intf. is up, Line Protocol is up, Addr. is 172.17.100.10

Source addr: 11.11.11.1, Dest addr: MGRE

Protocol/Transport: "multi-GRE/IP", Protect "DMVPN_PRJ",

Tunnel VRF "", ip vrf forwarding ""

NHRP Details: NHS: 172.17.100.1 E

Type:Spoke, NBMA Peers:1

# Ent Peer NBMA Addr Peer Tunnel Add State UpDn Tm Attrb Target Network

----- --------------- --------------- ----- -------- ----- -----------------

1 1.1.1.1 172.17.100.1 IKE never S 172.17.100.1/32

Interface: Tunnel0

Session: [0x48E31B98]

Crypto Session Status: DOWN

fvrf: (none), IPSEC FLOW: permit 47 host 11.11.11.1 host 1.1.1.1

Active SAs: 0, origin: crypto map

Outbound SPI : 0x 0, transform :

Socket State: Closed

Pending DMVPN Sessions:

RTR_SITE1#sh ip nhrp detail

172.17.100.1/32 via 172.17.100.1, Tunnel0 created 00:33:44, never expire

Type: static, Flags: used

NBMA address: 1.1.1.1

RTR_SITE1#sh crypto ipsec sa

interface: Tunnel0

Crypto map tag: Tunnel0-head-0, local addr 11.11.11.1

protected vrf: (none)

local ident (addr/mask/prot/port): (11.11.11.1/255.255.255.255/47/0)

remote ident (addr/mask/prot/port): (1.1.1.1/255.255.255.255/47/0)

current_peer 1.1.1.1 port 500

PERMIT, flags={origin_is_acl,}

#pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0

#pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0

#pkts compressed: 0, #pkts decompressed: 0

#pkts not compressed: 0, #pkts compr. failed: 0

#pkts not decompressed: 0, #pkts decompress failed: 0

#send errors 46, #recv errors 0

local crypto endpt.: 11.11.11.1, remote crypto endpt.: 1.1.1.1

path mtu 1500, ip mtu 1500, ip mtu idb GigabitEthernet0/0

current outbound spi: 0x0(0)

inbound esp sas:

inbound ah sas:

inbound pcp sas:

outbound esp sas:

outbound ah sas:

outbound pcp sas:

All these commands appear as empty when I throw them on the hub router.

Any help appreciated.

Thank you

No negotiate is because you do not have an Ike key implemented. You need

Crypto ISAKMP policy 1

BA (whatever)

AUTH pre-shared

Group (whatever)

ISAKMP crypto key 0 some secret address 0.0.0.0 0.0.0.0

Hun and talks must match.

Your IPSec transform-set should also have "transport mode".

Sent by Cisco Support technique iPad App

Metro App for Messenger "we cannot send a message now.

I try to use the Metro Messenger for Facebook chat app, and I linked accounts. Whenever I start it, it says 'get info' at the top, but my status down in the background is always "not connected". I'm unable to change the active status or Invisible, because these options are grayed out. When I type a message in the text box, red text appears above it that reads "we cannot send a message now.
After you initially install Windows 8, the Messenger app worked well. Later in the night after a few updates it stop working and I rebooted my system several times since then, nothing helps.

I had the same problem as well. I have uninstalled/installed and the issue has not yet returned. I think that the problem is with Skype, as JoakimMagnusson noted.

Reinstall the application Messenger solved the problem for me, even with Skype being still there, I can send and receive messages.

Pop - up using javascript in dynamics of the Actions

Hi all
Before you begin with the question, I want to share the below of the details on the application
Table creation script
create table status_dashboard (ID number, name varchar2 (10), varchar2 (10) State, varchar2 (1000)) URL;
Insert the script
insert into status_dashboard values 1, 'A1', 'up', 'www.ibm.com';
insert into status_dashboard values 1, 'B1', 'up', 'www.hp.com';
"insert into status_dashboard values 1, 'C1', 'up', ' www.msn.com";
insert into status_dashboard values (1, "D1", "low", "www.yahoo.com'");
insert into status_dashboard values 1, 'E1', 'up', 'www.oracle.com';
insert into status_dashboard values 1, 'F1', 'up', 'www.facebook.com';
insert into status_dashboard values (1, 'G1', 'down', 'www.twitter.com');
"insert into status_dashboard values 1, 'H1', 'up', ' www.google.com ';
insert into status_dashboard values 1, 'I1', 'up', 'www.apex.oracle.com';
Report query
SELECT max (case when mod (rn, 3) = 1 then end name) col1
, max (case when mod (rn, 3) = 2 then end name) col2
, max (case when mod (rn, 3) = 0 then end name) col3
, max (case when mod (rn, 3) = 1 then decode (status, 'down', 'red', 'green') end) The_color1
, max (case when mod (rn, 3) = 2 decode (status, 'down', 'red', 'green') then end) The_color2
, max (case when mod (rn, 3) = 0 then decode (status, 'down', 'red', 'green') end) The_color3
, ceil ((rn) / 3)
(select name, status, row_number() on rn (order by name) of status_dashboard)
Group by ceil ((rn) / 3)
order by ceil ((rn) / 3)
Report link on Oracle Apex
https://Apex.Oracle.com/pls/Apex/f?p=54850:1
I created a matrix report, enabled the conditional formatting. The only problem I have right now is to go to a link in the report.
I use 3 text elements Apex - P1_ID, P1_NAME and P1_URL.
I use also 3 dynamic actions
1. DEFINE NAME - will set the P1_NAME field with the value clicked in the report.
2 SET ID & URL - define the fields P1_ID and P1_URL of the DB using the P1_NAME field.
3-pop-up-appears the P1_URL using javascript.
Problem statement:
The pop up page is a blank page, although I can see that the value for the P1_URL field is defined using dynamic measurements.
Could someone please take a look at this example and help me with the same.
PS: The example was developed using sample data.

Hello

When you use the substitution in JavaScript string, the value is used when page and is pretty hard-coded in the document value.

Even if you change the value of the element or the element value in session state, it will not happen to the HTML document.

In dynamic action, try something like
```
popupURL($v("P1_URL"))
```
Who will choose the value of the item and pass it to the popupURL function.

Yes, you have created, sample, but how we can view source if we are unable to connect your workspace?

Kind regards

Jari

The high 6 POS CPU usage

Hi all
I have two instances 6 POS. A week ago, a saw that the use of the CPU on one of them is almost always 100%. Backup jobs, the second instance has about 20% CPU usage.
The difference I find: (second instance does not have this kind of errors)
root@clvdp01:/space/Avamar/var/MC/server_log/#: tail-f axis2.log
2015-05-18 10:04:04, 273 [218184632@qtp-1305303392-4784] ERROR org.apache.axis2.transport.http.AxisServlet - space of Java heap
means: Java heap space
2015-05-18 10:04:37, 105 [1384024202@qtp-1305303392-4789] ERROR org.apache.axis2.transport.http.AxisServlet - space of Java heap
means: Java heap space
2015-05-18 10:05:13, 130 [1795787615@qtp-1305303392-4779] ERROR org.apache.axis2.transport.http.AxisServlet - space of Java heap
means: Java heap space
2015-05-18 10:05:49, 640 [1593678748@qtp-1305303392-4821] ERROR org.apache.axis2.transport.http.AxisServlet - space of Java heap
means: Java heap space
2015-05-18 10:09:11, 437 [1107337480@qtp-1305303392-4777] ERROR org.apache.axis2.transport.http.AxisServlet - space of Java heap
means: Java heap space
More information below:
Status.DPN
Mon May 18 10:05:20 CEST 2015 [clvdp01] MON may 18 08:05:20 UTC 2015 (initialized Thu 2 Oct 10:31:18 UTC 2014)
Node IP address Version State Runlevel user + Root + Srvr Dis suspend charge UsedMB Errlen % full full and the band by disk status
MHPU fullaccess 0.0 online 10.190.4.61 7.1.81 - 107 + 0hpu + 0hpu 1 false 6.05 7460 6866739 43.0% 43% (onl:1792) 43 43 %(onl:1792) %(onl:1795)
Modes user + Root + Srvr = migrate + hfswriteable + persistwriteable + useraccntwriteable
System ID: 1412245878@00:50:56:A2:0D:56
All declared states = (ONLINE), = (fullaccess) runlevels, modes (mhpu + 0hpu + 0hpu)
The system state: ok
Access-situation: full
Final control point: over cp.20150517093236 Sun may 17 11:33:38 2015 after 01 m 01 s (OK)
Last GC: finished the Mon May 18 09:34:53 2015 after 01 h 27 m > > found 11.24 GB (OK)
Last hfscheck: finished Sun may 17 11:30:06 2015 after 01 h 18 m > > checked 2832, 2832 stripes (OK)
Active maintenance windows scheduler capability profile.
The maintenance window is running.
Running task (s): crunchwait
Next start time of backup window: killed May 19 00:00:00 CEST 2015
Start time of next maintenance window: Tue May 19 08:00 CEST 2015
status of dpnctl
Identity added: /home/dpn/.ssh/dpnid (/ home/dpn/.ssh/dpnid)
dpnctl: INFO: gsan status: to the top
dpnctl: INFO: status MCS: upward.
dpnctl: INFO: status of the backup scheduler: upward.
dpnctl: INFO: axionfs status: down.
dpnctl: INFO: status of Maintenance windows scheduler: enabled.
dpnctl: INFO: starting automatic State: enabled.
dpnctl: INFO: [see log file ' / usr/local/avamar/var/log/dpnctl.log ']
Back to top
Top - 10:11:05 up to 3 days, 11:21, 1 user, load average: 6.19, 5.49, 5.22
Tasks: running, 230 232 1 total sleep, 0 off, 1 zombie
CPU: 52.5%us, 0.7%sy, 0.9%ni, 42.4%id, 3.6%wa, 0.0%hi, 0.1%si, 0.0%st
MEM: 7926796 k total, 7515232 k used, 411564 k free, 9240 k buffers
Swap: 4200988 k total, 0 k used, 4200988 k, 2833152-free updated k cached
PID USER PR NOR VIRT RES SHR S % CPU % MEM TIME + COMMAND
8547 admin 20 0 596 java 16.9 19371:50 S 2030 m 1.3 g 5580
root@clvdp01:/space/Avamar/var/MC/server_log/#: ps to the | grep 8547
Admin 8547 387 16.8 2077128 1335904? Sl May14 19374:25 /usr/java/latest/bin/java -Xmx1G -XX:MaxPermSize=256m -XX:+HeapDumpOnOutOfMemoryError -server -ea -cp /usr/local/avamar/lib/avamar-mcsecurity.jar:/usr/local/avamar/lib/commons-cli-1.2.jar:/usr/local/avamar/lib/commons-lang-2.6.jar:/usr/local/avamar/lib/commons-logging-adapters-1.1.jar:/usr/local/avamar/lib/rsa-jsafe-cryptojFIPS-5.0.jar:/usr/local/avamar/lib/rsa-jsafe-util-5.0.jar:/usr/local/avamar/lib/spring-jdbc-3.1.1.RELEASE.jar:/usr/local/avamar/lib/spring-tx-3.1.1.RELEASE.jar:/usr/local/avamar/lib/mcserver.jar:/usr/local/avamar/var/mc/server_data/prefs :lib:/usr/local/avamar/lib/asn_server.jar:/usr/local/avamar/lib/mail.jar:/usr/local/avamar/lib/activation.jar:/usr/local/avamar/lib/xercesImpl.jar:/usr/local/avamar/lib/xmlsec.jar:/usr/local/avamar/lib/xmldsig.jar:lib/postgresql-8.4-702.jdbc4.jar:/usr/local/avamar/lib/jaxrpc.jar:/usr/local/avamar/lib/commons-logging-1.0.4.jar:/usr/local/avamar/lib/commons-validator.jar:/usr/local/avamar/lib/commons-discovery-0.2.jar:/usr/local/avamar/lib/commons-collections-3.2.1.jar:/usr/local/avamar/lib/saaj.jar:/usr/local/avamar/lib/wbem.jar:/usr/local/avamar/lib/wsdl4j-1.5.1.jar:/usr/local/avamar/lib/log4j-1.2.14.jar:/usr/ local/avamar/lib/axis.jar:/usr/local/avamar/lib/vim25.jar:/usr/local/avamar/lib/commons-codec-1.3.jar:/usr/local/avamar/lib/jema_api.jar:/usr/local/avamar/lib/jetty-6.1.23.jar:/usr/local/avamar/lib/jetty-util-6.1.23.jar:/usr/local/avamar/lib/servlet-api-3.0.jar:/usr/local/avamar/lib/jsp-api-2.1.jar:/usr/local/avamar/lib/jsp-2.1.jar:/usr/local/avamar/lib/core-3.1.1.jar:/usr/local/avamar/lib/ant-1.6.5.jar:/usr/local/avamar/lib/apputils25.jar:/usr/local/avamar/lib/j2ssh-core-0.2.9.jar:/usr/local/avamar/lib/snmp4j-1.11.jar:/usr/local/avamar/lib/mccommons.jar:/usr/local/avamar/lib/user-authentication.jar:/ usr/local/avamar/lib/nis-1.2.1.jar:/usr/local/avamar/lib/providerutil-1.2.1.jar:/usr/local/avamar/lib/commons-lang-2.6.jar:/usr/local/avamar/lib/commons-io-1.4.jar:/usr/local/avamar/lib/jutf7-1.0.0.jar:/usr/local/avamar/lib/i18n:/usr/local/avamar/lib/certj.jar:/usr/local/avamar/lib/cryptojFIPS.jar:/usr/local/avamar/lib/sslj.jar:/usr/local/avamar/lib/amqp-client-3.1.3.jar:/usr/local/avamar/lib/events-dispatcher-api-1.0.0.jar:/usr/local/avamar/lib/events-dispatcher-amqp-1.0.0.jar:/usr/local/avamar/lib/jackson-core-asl-1.8.3.jar:/usr/local/avamar/lib/jackson-mapper-asl-1.8.3.jar:/usr/local/avamar/lib/aopalliance-1.0.jar:/usr/local/avamar/lib/aspectjweaver-1.6.12.jar:/ usr/local/avamar/lib/spring-aop-3.1.1.RELEASE.jar:/usr/local/avamar/lib/spring-asm-3.1.1.RELEASE.jar:/usr/local/avamar/lib/spring-beans-3.1.1.RELEASE.jar:/usr/local/avamar/lib/spring-context-3.1.1.RELEASE.jar:/usr/local/avamar/lib/spring-core-3.1.1.RELEASE.jar:/usr/local/avamar/lib/spring-expression-3.1.1.RELEASE.jar:/usr/local/avamar/lib/spring-amqp-1.2.0.RELEASE.jar:/usr/local/avamar/lib/spring-rabbit-1.2.0.RELEASE.jar:/usr/local/avamar/lib/spring-web-3.1.1.RELEASE.jar:/usr/local/avamar/lib/spring-jdbc-3.1.1.RELEASE.jar:/usr/local/avamar/lib/spring-tx-3.1.1.RELEASE.jar::/usr/local/avamar/lib/spring-security-config-3.1.0.RELEASE.jar:/usr/local/avamar/lib/spring-security-core-3.1.0.RELEASE.jar:/usr/local/avamar/lib/spring-security-crypto-3.1.0.RELEASE.jar:/usr/local/avamar/lib/ printemps-sécurité-web-3.1.0.RELEASE.jar - Djava.rmi.server.hostname=clvdp01-Djava.util.logging.config.file=/usr/local/avamar/lib/mcserver_logging.properties-Djava.security.egd=file:/dev/./urandom-Djava.io.tmpdir=/usr/local/avamar/var/mc/server_tmp-Djava.util.prefs.PreferencesFactory=com.avamar.mc.util.MCServerPreferencesFactory-Djavax.xml.parsers.DocumentBuilderFactory=org.apache.xerces.jaxp.DocumentBuilderFactoryImpl-Djavax.net.ssl.keyStore=lib/rmi_ssl_keystore-Djavax.net.ssl.trustStore=lib/rmi_ssl_keystore-Dfile.encoding=UTF-8-Dlog4j.configuration=file:///usr/local/avamar/lib/log4j.properties com.avamar.mc.CLI--début
- What someone can help?
Best regards
Jacek

POS 6.0.1 release notes said it fixes an issue with high CPU usage. Perhaps one of your instances has configuration of e-mail and the other not. Maybe the upgrade, the problem will be solved.

225694 CPU consumption does not decrease after that a program of electronic mail has been triggered for the longevity scale setting.

vSphere Data Protection (WTP) and Advanced VDP 6.0.1 Release Notes

How to activate the Workflow Service Agent - E - BIZ R12 Oracle listener
Environment

DB: 11.1.0.7
Rel. Appl: R12.1.1
OS : RHEL 5.1 (x86_64)

Here is the work around is to bring up the WF Agent listener

After completion of the accessing the WORKFLOW system Clone,

Shippers notice status: down
Agent listeners: down
Fix components: down

-Workflow Notification Mailer is not required for this Instance

I did it after the NAVIGATION

Log in as a sysadmin

Go to system administrator > OAM > Wrkflow > fix components

Here this theres window a dropdown menu with the actions defined, I selected Stop ALL and click Go

a Req on submitted, when I checked administrator system > OAM > Wrkflow > Service components

Status of the components are disable ...

After awhile, I chose listener WF Agent and started OAM and another checked the concurrent application windows, it had ended normal and there was no exit and the file log and priority is 0

Please guide me what needs to be done to activate the particular service...

-Chetan
Please see these Docs MOS.

How to start the deferred Workflow Agent andWorkflow deferred Java Agent listener listener? [548918.1 ID]
"Service component container does not work" when you try to start workflow components [733335.1 ID]
Troubleshooting failure of workflow Agent listener on startup [ID 469009.1]

Thank you
Hussein

chipset nForce 4 on machine ESX

Hi all
Directly to the company the Board in question has GA-MCP61PM-S2 and 3c905 3Com NIC series.
I have two specific problems with ESX 3.5 installation. I have install with what looks like a support installing card - module 3Com 3c90x loads and NIC is implemented as vmnic1 (but not as eth0). eth0 is pretty fun as well though - and this is my second problem noted below.
After that the installation of the adapter status ' Down 'for ESX but in ifconfig it shows as upward again no LAN communication cannot be made. "
It's a little strange and me being don't not an expert on * UX systems is not helping either. Is there a way to check that I need another module maybe or the problem is somewhere else? Please help in this matter even if it is a ultra basic command where I can check the necessary exact module
Second question is this:
I have install ESX assign IP present on my network DHCP, vmnic1's up, vswif0 returns with bind MAC address to vmnic1 (as I understand it architecture of ESX) - 3Com is not working.
I have nForce chipset with a SATA drive and I followed the procedures of modification pciid - who did my bootable system.
I've read several times during my research that Onboard LAN is not supported, but that's not true. lspci lists control supported xml pciid when compared with the file.
When I present 3Com AND write ifup eth0 it evokes the card on board! I get dhclient (previously created a reservation on the DHCP server for this card) with SAME IP address map vmnic1 form, there are a few errors, but the map begins to work! Web server works (NO UI nut), I download the client and it connects.
I have created a store of data on the host as well on the SATA drive.
So he IS supported through forcedeth, but probably there is a naming convention that brings the card incorrectly. In addition, I don't see the eth0 (edge Nvidia) card as the physical card.
When I try to add atleast 3Com as a physical card, I get a strange error that 'esxcfg-boot - i performed well, but instead of 0, he got the value 255." I have no idea whatsoever what that meanss so if someone could explain in basic terms what it means and where to look for help to address this issue.
Finally and most importantly, I would at least like to have this up and Dhclient eth0 run automatically so I can connect to SC/ssh, even in this type of configuration (mis) where no other problem can be solved, so I can finally he plug away from my main monitor
P.S. I hope someone can make heads and tails in this post

ESX uses Linux for the installer but the vmkernel that starts is not Linux, so the problem is that 3com does not work with the vmkernel.

What is the PCI id for the other NETWORK adapter?

DMP status down on DMM

Similar Questions

Maybe you are looking for