AP 1131ag 802. 11 a Oper status = down

Similar Questions

• difference between the operational status of APs to the TOP and REG (registered)

  Hello guys,.

  I want to know what is the difference between the operational status of APs to the TOP and REG?

  Thanks in advance

  A radio operating state is up/down.  REG AP means that the PA has joined with success the controller.  The AP must be in the State REG (registry) radios appear.

  -Scott

  Please evaluate the useful messages *.

• SQlite operations slow down the user interface on OS 5 thread

  Hi guys,.

  No notices that DB operations slow down the UI thread? For the entire application is unresponsible, and sometimes all the devices. Is it because that the operations of SD card?

  Could someone RIM's comment on that?

  Thank you

  Eugen

  Chance I just update the latest news I've had experts at the BB dev Conference:

  The architecture of the JVM is designed expects until native calls completed. It is not true for all native calls, it is also greatly improved in OS 7 release.

  But it puts a light on the dark areas. If I know this information before I would try to check that much - much earlier and slow down question difficulty much - much easier.

  So guys, don't forget this info whenever you get the issue of users with OS 4.6 - 5.

• Operational status SCCP bring up is successful. message not sent to port or VTY sessions to THE

  Hello

  On a Cisco IOS router, when the command of the CSPC is configured, the following message is sent to the console port:

  Operational status SCCP bring up is successful

  However, this message is not sent to telnet or ssh sessions through VTYs, or ports in the

  Is this a bug?

  I tested it on:

  2821 router running IOS Version 12.4 (24) T6 with function ADVENTERPRISEK9 defined

  2801 router running IOS Version 12.4 (24) T6 with function SPSERVICESK9 defined

  2801 router running IOS Version 12.4 (24) T6 with function ADVENTERPRISEK9 defined

  2921 router running IOS Version 15.2 (3) T

  2851 router running IOS Version 12.4 (24) T6 with function ADVENTERPRISEK9 defined

  Gateway analog voice VG224 running IOS Version 15.1 (3) T1

  Router 7206VXR with NPE - 400, running IOS Version 15.1 (4) M4 with the ADVENTERPRISEK9 option

  I'd say it's a (minor) bug.  An IOS programmer SHOULD have sent the message to the logging engine, but sometimes a programmers could write a message directly to the console for internal diagnostics during development, even if it is not the best practice.

  They should remove this message before sending the code, or make a call suitable for the engine of logging to announce the event through standard logging mechanisms.

  Please engage the TAC in order to get a bug filed.

• DMP status down on DMM

  Hi all

  I came today to see that most of the players on DMM's status down.

  DMM version: 5.2.2

  The DMP version: 5.2.3

  After checking, I noticed that the certificate installed in the DMP are expired.

  Can you show me how I can solve the problem?

  Thank you.

  In theory your DMM and DMP must always be at the same level of output.  I suggest you upgrade your DMM to 5.2.3 first.  Then use the 5.2.3 patch to fix this problem.

  Take care

• Operational status - WLC 2504 AND LAP 3501

  The AP is connected to the WLC but guard take down is Raodio. As suggested, I played with the settings of PoE, nothing helps...

  Sea 1 18:30:36 Feb 2012	AP Interface: 0(802.11b) State Down operation: basic Radio MAC: e8:ba:70:93:81:60 Cause = reset interface radio status: NA
  3	Sea 1 18:30:36 Feb 2012	AP Interface: 0(802.11b) operation State Up: basic Radio MAC: e8:ba:70:93:81:60 Cause = Admin on Radio status change: Enable
  4	Sea 1 18:30:36 Feb 2012	AP Interface: 0(802.11b) State Down operation: basic Radio MAC: e8:ba:70:93:81:60 Cause = Admin on Radio status change: disable
  5	Sea 1 18:25:32 Feb 2012	AP Interface: 0(802.11b) State Down operation: basic Radio MAC: e8:ba:70:93:81:60 Cause = reset interface radio status: NA
  6	Sea 1 18:25:29 Feb 2012	AP Interface: 0(802.11b) operation State Up: basic Radio MAC: e8:ba:70:93:81:60 Cause = Radio reset due to the Init. Status: NA

  Any ideas... I've checked everything... AP is Port 4 of the WLC

  *Mar  1 00:00:12.988: %SOAP_FIPS-2-SELF_TEST_RAD_FAILURE: RADIO crypto FIPS self                                 test failed at 128 bit AMAC AEC CCM encrypt on interface Dot11Radio 0 -Process=                                 "Init", ipl= 0, pid= 3 

  Now, that's what I was looking for!

  Your 802. 11 b radio is dead.  Please contact Cisco to get this replaced WAP.

• EtherCAT - OR Scan Engine could not be changed in Active mode, because one or several slave devices does not have operational status

  Hello, I use a Compact Rio 9074 with an EtherCAT NI 9144 chassis extension

  I am able to see both devices 9074 and 9144 Labview project, but when I try to deploy configuration 9074 controller tracking error is displayed:

  

  I tried deployment while defining the Configuration Mode and Active Mode. Also, when I check on the status of master Ethercat online its State in: pre-operational with errors. And appers this message: error-2147137769 occurred at an unidentified place

  

  I'm using Labview 2011 and the OR cRio has installed:

  

  I tried formatting cRio and reinstall NI Ethercat and scanner again

  I wonder if anyone has the same problem, I'd appreciate any help.

  Thanks in advance

  Thank you very much, DirkW worked for me immediately

• CTS telephone operational status

  Hello

  I'm trying to monitor the operating condition of the IP phone connected to a CTS-1300 via SNMP, however I found that the MIB (MIB-TELEPRESENCE-CISCO) related to this material does not deal specifically of this requirement.

  As far as I could test, ctpPeripheralStatus (1.3.6.1.4.1.9.9.643.1.2.1.1.3) would indicate only the attached status but not telepresence-ready status, which in turn is somewhat different from the point of view of the CallManager (registered/not registered), given that the phone could be registered to CUCM and actually not OK to take calls.

  So what I found an empirical point of view, it is that readiness is obtained when the phone has successfully downloads and installs the MIDlet, which in turn is reflected in the election of the MIB extraction ctpPeripheralDescription (1.3.6.1.4.1.9.9.643.1.2.1.1.2):

  ctpPeripheralDescription

  
  

  ISO.3.6.1.4.1.9.9.643.1.2.1.1.2.2 = STRING: "IP_PHONE - MACAddress = AABBCCDDEE, HostName = SEPAABBCCDDEE, PhoneDN = 1000, AppLoadID = jar75sip.9 - 2-1TH1 - 13.sbn,

  BootLoadID = tnp75.8 - 3-4 - 16BN01.bin, Version = SIP75.921 S, HardwareRevision = 11.0,

  SerialNumber = ABC12345XYZ, ModelNumber = CP - 7975 G,MidletVersion = Transport SPM - 1.8.1 - P1 - 1s"

  ctpPeripheralStatus

  ISO.3.6.1.4.1.9.9.643.1.2.1.1.3.2 = INTEGER: 0

  CtpPeripheralStatusCode: = TEXTUAL-CONVENTION

  Current STATUS

  DESCRIPTION

  "The textual convention identifies the State of the device.

  noError (0).

  Expected device works through

  the port is attached.

  ctpPeripheralDeviceCategory

  ISO.3.6.1.4.1.9.9.643.1.2.1.1.4.2 = INTEGER: 3

  CtpPeripheralDeviceCategoryCode ::= TEXTUAL-CONVENTION

      STATUS          current

      DESCRIPTION

          "The textual convention identifies the peripheral type.

          unknown              (0)  -- Unknown Device

          other                (1)  -- None of the listed device

          uplinkDevice         (2)  -- Device attached to CTS uplink port

          ipPhone              (3)  -- IP phone

  If ctpPeripheralDescription display the software of the phone listed, then it is good. Maybe the status OK/not OK seen through CTS GUI is displayed after an assessment of this kind?

  I have already laid around and did some additional tests along, but apparently it's the only way to properly assert via SNMP simple, if the phone does not work correctly.

  Is there another way to check this?

  Thanks in advance,

  Gabriel

  Hello Gabriel,

  Since you had no response, and yet I'm scanning my archives of memory and what you have concluded matches what is in the MIB, RFC and Message to SNMP trap doc for the CTS systems:

  http://www.Cisco.com/en/us/docs/Telepresence/cucm_cts/cucm_cts_admin_book/guide/cucm_cts_admin_mibs.html

  The displayed phone charge, version midlet and the status of noError (0) of the ipPhone (3) should coincide with no error in the GUI and the phone successfully, showing the midlets and ready for telepresence.

  HTH,

  Paula

• Demand for launched operation status

  Hello

  I implemented a custom of SOA and workflow built-in IOM via the trust policy (operational level approval). Approval is triggered appropriately and workflow (notification of the action) is made, once approved resources gets provisioned successfully, but demand remains in launched operation and never perform status request completed. I'm missing something here.

  Thanks in advance.

  Here's a useful query:

  Select orchprocess.id, orchevents.id, request.request_key, request.request_status, rbe.rbe_beneficiary_key, request.request_model_name, rbe.rbe_entity_name, ost.ost_status, usr.usr_login, request.request_creation_date

  request request_beneficiary_entities RBA, usr, usr applicant, Ouedraogo, ost, orchprocess, orchevents

  where request.request_status = 'Open Post processing Operation'

  and request.request_key = rbe.rbe_request_key

  and rbe.rbe_beneficiary_key = usr.usr_key

  and request.requester_key = requester.usr_key

  and rbe.rbe_entity_key = oiu.oiu_key

  and oiu.ost_key = ost.ost_key

  and request.orchestration_process_id = orchprocess.id

  and orchprocess.id = orchevents.processid

  and orchevents.name = 'CheckProvisioningStatus. '

  and orchevents.status = 'Pending'

  and)

  (request.request_model_name = 'Disable provisioned Resource' and ost.ost_status in ('disabled'))

  OR (in request.request_model_name ("available resource", and "Self-application") and ost.ost_status in ('set', 'Enabled', 'Disabled'))

  OR (ost.ost_status = "Revoked")

  )

  order of request.request_creation_date

  By using the orchprocess.id and orchevents.id values, you can use this API to set the task awaiting completed orchestration:

  OrchestrationEngine orchEngine = (OrchestrationEngine) Platform.getService (OrchestrationEngine.class);

  orchEngine.setEventResult (, , EventResult()) new;

  -Kevin

• Rookie question: checking return to operation status

  I'm doing my first powershell script for vmware and I wonder how to check the status of an operation return.  Most of the examples simply assume that everything works as expected

  In particular, I use news-snapshot and remove-snapshot operations.

  If anyone can give me a pointer in the right place in some documents, I'll be happy to leave from there.

  Thank you!

  Pat

  First of all, you can examine the $? and the $error variable.

  PS error handling, see chapter of Tobias here.

  In fact, the complete series is ideal for the new PS users and intermediaries.

  PS you can also use the trap to capture errors and performance/display of return codes and error messages.

  Yasen gave a very good explanation on the use of the trap and the VITK in How to correctly catch the VimExceptions?.

• opening optimizer.exe win registry I can not load any thing without obtained operating record down

  win registry optimizer.exe opening I can't go down load I didn't run I record when I push it don't do nothing

  Cleaning the registry:

  Read http://www.edbott.com/weblog/2005/04/why-i-don ' t-use-Registry-cleaners/and http://aumha.net/viewtopic.php?t=28099 and

  http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

• BlackBerry: Data not fully displayed in the screen of BB (version 5.0 Operating System/down) tested on BB bold3

  I have developed an application and it works well on OS6 (OS 6 fat for example 5) but does not work well on OS5 (OS 5.0 or less fat for example 3). The main problem is that I have data via JSON and displays several labels on the screen to display the data. According to the content received via json data can be large, but the main problem is that vertical scrolling does not allow the user to scroll down beyond a certain point. This fact I wonder if the screen in OS5 have little content allowed to shoot her. code snippet below.

  JSONArray json = new JSONArray(result);
  
  for (int i = 0; i < json.length(); ++i)
  {
      JSONObject moleculevalue = json.getJSONObject(i);//get the json data object
  
      String tdescription = moleculevalue.getString("Total Description");
  
     if (tdescription == "") tdescription = "Not Applicable";              
  
     _fieldManagerMiddle.add(new SeparatorField());
     _fieldManagerMiddle.add(new LabelField("Description: " + tdescription, Field.FIELD_HCENTER));
  
  }
  

  Data still exist, but the user cannot scroll under the view of the screen.

  Can someone tell me a work around for this and, possibly, of the reasons for this. Thanks in advance.

  No need for any ZIP code at the moment, as I suspect the issue here is the lack of focusable fields.  Default LabelField is not active.  This can restrict scrolling especially on non touchscreen devices.  This isn't an OS related issue, but touch no touch verses.

  Two suggestions before the validation code:

  (a) to make active the LabelField

  _fieldManagerMiddle.Add (new LabelField ("Description:" + tdescription, Field.FIELD_HCENTER |)) LabelField.FOCUSABLE));

  (b) add a NullField after the LabelField

  Let us know how you go with it.

• Status of the host down to DB OAM nodes

  Hi all
  
  I see that my host db node status is displayed in red (bottom) in OAM but our database and listener is running.
  AppsVer:r12.1.1
  
  OS LInux 5
  
  What would be the reason?
  
  Thank you
  Maverick
  
  Published by: Maverick on November 23, 2011 14:06

  Salvation;

  Have you checked under the lead of research that is posted by Hussein snoussi

  simultaneous treatment of status down to the OAM

  Respect of
  HELIOS

• I use only 20 MB when you connect to the 802. 11A

  Hello

  I test aironet 1130ag with the wlc 2106 in my test environment

  When I connect to the 802. 11 a or g, I can get max speed 20 MB and not 54 MB

  What is worng and what should I check?

  Here is the basic configuration of the 802. 11A

  network 802. 11A... Activated
  11nSupport... Activated
  802. 11A of low band... Activated
  802. 11A mi band... Activated
  802 11A high band... Activated
  802. 11A operational rates
  802. 11 a 6 M rate... Mandatory
  802. 11-9 M rate... Support
  802. 11 a 12 M rate... Mandatory
  802. 11-18 M rate... Support
  802. 11-24 M rate... Mandatory
  802. 11A rate of 36 M... Support
  802. 11A rate 48 M... Support
  802. 11-54 M rate... Mandatory

  Beacon interval... 100
  CF Pollable mandatory... People with disabilities
  CF poll request mandatory... People with disabilities
  CFP Period....................................... 4
  Maximum duration of CFP... 60
  Default channel... 36
  Default Tx power level... 1
  DTPC status... Activated
  Fragmentation threshold... 2346
  Long retry limit... 4
  Lifetime maximum Rx... 512
  Service life of Max Tx MSDU... 512
  Medium limit of occupation... 100
  Pico-cell status... People with disabilities
  State of the Pico - cell - V2... People with disabilities
  RTS threshold... 2347
  Short retry limit... 7
  Threshold of TI-50
  State of the metric traffic flow... People with disabilities
  State of the accelerated application of BW... People with disabilities
  Profile EDCA type... by default-wmm

  Thank you

  When you say that you get only 20 MB do you want to say is that your data rate or throughput of your true?  If this is the true throughput which is right.  Remember that 802.11 is a technology of half duplex.  Half duplex and the management fee a client that connects to 54 Mbps can have a flow in fact up to 22Mbps

• WebLogic Server down on OEM Cloud Control

  Hello

  I have my 12.1.0.2 cloud control. I installed the plug-in of GoldenGate and after that I get alert suite which means my weblogic server is broken on my cloud of OEM will.

  Host=SGPvPSCC12c.ap.datahost.int
  Target type=Oracle HTTP Server
  Target name=/EMGC_GCDomain/instance1/ohs1<https://SGPvPSCC12c.ap.datahost.int:7802/em/redirect?pageType=TARGET_HOMEPAGE&targetName=%2FEMGC_GCDomain%2Finstance1%2Fohs1&targetType=oracle_apache>
  Categories=Availability
  Message=The Oracle HTTP Server instance is down<https://SGPvPSCC12c.ap.datahost.int:7802/em/redirect?pageType=sdk-core-event-console-detailEvent&issueID=ED53896CA3EE5FD5E043350019AC1CB7>
  Severity=Fatal
  Event reported time=Dec 12, 2013 5:32:01 PM SGT
  Target Lifecycle Status=Production
  Platform=x86_64
  Line of Business=Data Centre
  Operating System=Linux
  Event Type=Target Availability
  Event name=Status
  Availability status=Down<https://SGPvPSCC12c.ap.datahost.int:7802/em/redirect?pageType=sdk-core-avail-status-overview&timePeriod=byDay&target=%2FEMGC_GCDomain%2Finstance1%2Fohs1&type=oracle_apach
  e>
  Rule Name=Rule set for production group PROD,Rule 1 Event Target Down
  Rule Owner=GRIDMGR
  Update Details:
  The Oracle HTTP Server instance is down
  
  

  Here, I have a few questions.

  (1) if my weblogic is down, why my CC OEM works great and all alerts are coming? What is the reason that we have weblogic on our OEM Cloud control, which is a prerequisite to install CC OEM? What is the purpose of this weblogic moving downwards as you can see above the alert. What happens if I don't start the weblogic?

  (2) how to start the weblogic (HTTP). Do I need a name of user and password to start this?

  (3) what is the sequence to start OEM CC after rebooting a server (DB->->-> agent WHO Weblogic) is this correct order?

  Thank you

  (1) start by checking if the WebTier really down. See the instructions in the following MOS note:

  EM 12: status of Enterprise Manager 12.1.0.2 command displays the WebTier Cloud is down even if the WHO's and Running (Doc ID 1561468.1)

  Note: If the version of your WebTier (Oracle HTTP Server) is 11.1.1.6, it is recommended that you apply the patch 13490778 to avoid false alerts on Oracle HTTP server (status).

  (2) the OPINION score above includes instructions to start the Oracle HTTP Server (e.g. ohs1) with the command opmnctl. Also, when you run the command "emctl start who", the WebTier will be launched before the WHO. Thus, if restarting of the WHO is not a problem, you can run ' emctl who all stop "to stop all processes including the WebTier WHO, then run"emctl start CMS"to restart as well AS of the WebTier.

  (3) see the following doc for instructions on starting the components of EM12c:

  Start and stop of the Enterprise Manager components

  By default, the WHO and the agent are started automatically at startup of the host.

  I hope this helps.

  -Loc