DMVPN NAT - T emergency assistance?

Similar Questions

• DMVPN (NAT?) solution with rais as subnets

  Hi all

  I have a large number of remote networks that are prevalent all over the world. Currently, they are all individual island with no connectivity to anywhere else.

  What I would do is connect all back to Headquarters on the internet so I can access it remotely. The internet service that I receive from all the sites will be different and unknown for example some directly on the internet, some behind NAT.

  So I think that the solution to this is DMVPN.

  But my problem is that all of the remote locations have the same internal subnet. So, how can I make sure that they are all connected and remote devices are all available at the same time?

  I wonder if I can configure NAT on the router may talk so that each device has a static nat with the Natted IP is unique. I labbed this place GNS3 and it seems to work. However the problem is that there are hundreds of devices on each site, which means a large number of NAT entries.

  I was wondering is it possible to make a fair full 1:1 Nat specifies a network to network. For example, something like 192.168.20.0/24 NAT to 10.0.1.0/24, so try to access the 192.168.20.5 in fact, it connects to 10.0.1.5

  Has anyone never has something like this work?

  Y at - it a good solution?

  Thank you, Simon

  It is possible, but (assuming they already use NAT for Internet access) you'll need to define things very carefully to avoid interference with what they have.

  Do a complete translation of subnet is easy and is a good word:

  IP nat inside source static 10.0.0.0 network 192.168.0.0/24

  The problem is that this will replace all existing for this subnet NAT, condition and the existing NAT configuration.

  Can you provide an example of how the current NAT is set up for one of these sites?

• Using Unified Wireless network needed emergency assistance

  Dear community

  I need urget for a unified network wireless installation assistance to deploy in a college

  What in fact is the senario for this network I have a 5500 WLC and 12 lwapp 1252 APs series for this Ant of deployment, it is already a local network existing

  network to connect with him the new unified wireless configuration.

  

  This is above the proposed topology.

  I need help for this installation as

  I know the controller to do basic configuration but I don't really know of GUI, what steps I must configure the controller for each access points as you can see above I have three floors for the construction and I want given three SSIDS as use of contractors and comments for each floor and how to configure the encryption type and a shared key for each SSiD.

  and what I have to configure for APs to join them with controller

  and hoe to set RF grouping for each floor.

  Please I need urgent reply because I have tp finish this set up everything in a weekonly

  Thans in advance.

  Hello

  Wat ever you want... the link below has everything... Just click on the stuff you neeed FRO mthe menu and this will do it for you!

  http://www.Cisco.com/en/us/docs/wireless/controller/7.0/Configuration/Guide/C70.html

  1 > set up wireless LANs.

  2 > set up the consolidation of the AP.

  Concerning
  Surendra

• Need for EMERGENCY assistance... some pictures are green

  Worked on 8 different tribute videos all week... now exporting to show at a banquet tonight and the problem is that some of these photos appear as green blocks. There is no consistency with the type of file, because some are JPEGs and some are .psd. I made these videos for 8 years and never had this problem. I tried to export to AVI, MPEG-2 and H.264. Same problem each time. The pictures show well to the chronology of the organization. Help!

  If the images ' overview return "fine in the timeline, and it is urgent,

  you could try to export with controlled "use previews".

  You will probably take a degree of quality, but if it's an emergency situation...

• Implementation restriction ' DBMS_LOB. READWRITE "emergency assistance

  * "Implementation restriction ' DBMS_LOB." "READWRITE' cannot directly access the slider or the package variable remote."
  
  Hello
  
  I need urgent assistance to implement the DBMS_LOB Package.
  
  I need to write data to the LOB DBMS_LOB object using
  
  following the code is written in previous UPDATE for the CTX block trigger
  on the form, I took Clob_Desc_f as a field of database not of type CHAR (26000)
  After querying data I change Clob_Desc_f and enter the new data when recording it shoud empty field of trade based on the key with empty lob value
  and then write the data to the lob
  
  DECLARE
  w_Description_Clob CLOB.
  
  BEGIN
  /*
  Clob_Desc here is the lob field in table cxt
  */
  
  UPDATE Cxt
  SET Clob_Desc = Empty_Clob()
  WHERE Cxt.Key_Field =: Cxt.Key_Field RETURN Clob_Desc IN
  w_Description_Clob;
  
  Dbms_Lob.open (w_Description_Clob, Dbms_Lob.Lob_Readwrite);
  
  Dbms_Lob.write (w_Description_Clob
  Length(:Cxt.Clob_Desc_f)
  1
  ,: Cxt.Clob_Desc_f
  );
  
  Dbms_Lob.close (w_Description_Clob);
  
  END;
  
  
  The code above gives error saying
  [* 1] ELECTION clause is not supported in client donut
  * 2] for the statement *.
  Dbms_Lob.open (w_Description_Clob, Dbms_Lob.Lob_Readwrite);
  gives error like "' application Restriction Dbms_Lob.Lob_Readwrite: cannot directly access the remote package variable." "
  
  
  How I use Dbms_Lob.OPEN
  
  Thanks in advance.
  
  Kind regards
  Sourabh

  This code works for me:

  DECLARE
    cl CLOB;
  BEGIN
    DBMS_LOB.CREATETEMPORARY(cl, true);
    DBMS_LOB.OPEN(cl, 1);
    DBMS_LOB.WRITE(cl     ,Length(:BLOCK.TEXTITEM)     ,1,:BLOCK.TEXTITEM);
    DBMS_LOB.CLOSE(cl);
  
    UPDATE THE_CLOB_TABLE
    SET CLOBFIELD = cl
    WHERE CONDITION;
  
    DBMS_LOB.FREETEMPORARY(cl);
  
  END;
  

• Emergency assistance: can't remember the password!

  Hi all, I use an iPod Touch 4th gen and it is running iOS 7.

  When I turn on my iPod Touch I tells me to enter in a 4digit passcode, but I do not remember what and I don't want to get locked into the iPod Touch.

  I have my AppleID so can I use this somehow?

  Thank you!

  Anyone know anything I can try?

• Plugin Silverlight continues to crash when adding an attachment to the e-mail despite uninstalling and reinstalling silverlight and firefox 4 and other recommended troubleshooting. Need for emergency assistance. Thank you

  About adding attachments to e-mail hotmail, the page does not. On closing program I am informed that the silverlight plugin broke down. Have reloaded and sent reports to both microsoft and firefox, tried all troubleshooting recommended, uninstalled and reinstalled the latest silverlight and firefox 4, but on the attachment after each step into train silverlight continues to crash. Tried the attachment on the yahoo email, same thing.

  It is a question really old, but anyone with this problem should try updating to the latest Firefox and the latest Silverlight. You don't usually see problems when both are up-to-date.

• Emergency assistance: X 201 does not illuminate

  Hello

  I opened part of the monitor to change the cover back and then delicately assembled everything. Now, it does not turn. No indicator also. Looks like death.

  What do I do? :/

  Fixed.

  Card audio Conexant was the problem. I don't know why when I plug, laptop won't turn on. but I played with the cable a little and then it started working.

  weird...

• Emergency assistance in my Y500

  Hello

  I bought a Y500 a week in India... my backlit keyboard doesn't seem to work. Should I install a driver or how can I make it work? Sorry if its stupid, but when I turn on my laptop its light and then turns off it is everything!

  And in my control panel Nvidia I see available 4 GB graphics memory so it mean I have a SLI card installed in my ultrabay slot?

  But I am not able to detect in my Manager device... its not there... and how update my graphicsdriver... When I download the update, it says not found graphics card! m so confused!

  When I play the game of battery it lags so much... When I connect my power chord I get ultimate performance... I'm looking in the Nvidia control panel power management settings too, but it doesn't seem to help!

  Kindly help me pls

  Hello
  Welcome to the forums
  The backlight is user controllable. It is not automatically turned on or off. Once it lights it is during startup. To turn on the backlight for the keyboard, you have to press Fn + space and that should do. Use the same to turn the power off when you are not using it.
  To check if you have sli IE you have double chart, just check if you have a cd rom on my computer.
  On updating the graphics driver, I suggest you leave as it is since the update can ruin performance so rather keep it as it is.
  Lag on battery, I won't be much help because many others is subirontbeaucoup even, but it was not a resolution.
  Concerning
  Edit :-> my idiocy published

• Lack of local groups of SQL Server service causing my upgrade failed... (SQL2008R2 to SQL2014) emergency assistance

  Hi all
  I have problems with the upgrade of SQL Server 2008 R2 at SQL2014 with the error "no mapping between account names and security IDS was done" and the reason for the error is SQL server local groups that were created during installation (SQL2008 R2) are not on the local server groups.
  Can anyone help identify the good fix for this problem?
  SQLServerMSSQLUser$$MSSQLSERVER
  SQLServerSQLAgentUser$$MSSQLSERVER
  SQLServerReportServerUser$$MSRS10_50.MSSQLSERVER
  SQLServerFDHostUser$$MSSQLSERVER
  Please let me know if you need any further details.
  Thank you
  Naz
  S/N

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Drive recovery - emergency assistance please

  I have a HP Pavilion dv7 notebook PC running Windows 7.

  I just installed a replacement hard drive that HP sent me, and they also sent me system recovery discs as the operating system was not preinstalled on the hard drive. Recovery disc instructions say that the recovery only works when the computer starts with the first recovery disc into the optical drive. Also the computer should start with the first recovery disk.

  Obviously, my computer is turned off, because I just replaced the hard drive. I can not insert the disc in the player without the computer is on... but the instructions indicate that the disc must be there before I turn it on.

  It will cause a problem with my computer if I turn on the computer to insert the disc and then restart it to begin the recovery process?

  Thanks in advance for your help.

  Hello

  It will not cause any problems if you start the machine, insert the recovery disk 1, and then restart - you can also use the following method.

  Tap away at the esc you key start Notepad to open the Start Menu.  Insert the first disc of recovery.  Select the Boot Options menu (usually f9 ).  Use the arrow keys to select the CD/DVD drive and press ENTER - if you see a to' quick Press of any key to continue... ", do.

  Kind regards

  DP - K

• My tab 'Options files and research', 'Task Manager ', 'Run' & browsers other than windows explorer is hidden and not accessible. Emergency assistance is needed.

  As I said in the title, my problem is that I am not able to acess file and Search tab 'Options', ' Task Manager ', 'Run' & browsers other than windows explore.

  1. in the case of a tab 'Folder and search options' in the tab to organize, in the Explorer window, the tab appears as the hidden and cannot be clicked. The same"Folder and search options" when I looked in Control Panel, the icon was not seen or available.

  2. the same is also the case for the Task Manager. In the click right option on the taskbar displays the"Task manager" tab, but it seems to also be hidden or accessible when I press alt + ctrl + del window shows no option Task Manager or the tab.

  3. when I tried to run ' run the command ' the command window does not come and the following message appears.

  "Windows cannot find"C:\Windows\System32\cmd.exe". Make sure you typed the name correctly and then try again. »

  4. in a similar way when I tried to acess or run the Fireox internet browser, Google chrome and safari browser he showed asimilar message as illustrated tried to reinsall above.i browsers. It is renstalling, but the same error message appears after the reinstalling.   butthere was no problem in access of Microsoft Internet Explore.

  Windows Internet explore, the homepage has changed automatically and it opens the homepage given below.

  http://6-c-c-n-0.-u-.i-k-r-g-1-0-u-5-1-f-3-g-Li-9-p-1-x-t-6-g-l-8-m-q-y-s-k-6-l.info

  I am currently using the Microsoft Security Essentials as my Antivirus which is uptodate. Run full scans with antivirus but the scans is not revealed. Also, I'm a windows user who is also updated regularly.

  So far, I noticed only these problems that make me very difficult to work. The main problem is that I'm not in a situation to format my laptop. Please help me with these problems.

  Hello

  Restart in safe mode and run the antivirus scans here. You have symptoms of an infected machine. Scanning in safe mode will reduce efforts of the virus to avoid detection.

  To restart in safe mode, restart normally, and when the system resets you can press the F8 key. It is point immediately after the screen logo POST or manufacturer initial of the system, and just before Windows starts to load. This will give you a boot menu where you can choose Safe mode.

  While you're here, you must also download and run the tool free malwarebytes here:http://www.malwarebytes.org/ (choose Safe mode with networking to do this). He can catch something that lack of MSE, no security tool is perfect.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• I need pleassssssssssssssssssse emergency assistance!

  I have a laptop \dv3655ee\, but the internet adapter had a few bad advanced properties. This causes an interruption in Internet always.

  Please I need someone to help me with this problem. I have (R) \Intel AGN\ 5100 WiFi driver and also \Realtek RTL8168C (P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)

  I need to know what is the right of the properties given for these two pilots. I will be grateful if someone me the list.

  Pleassssssssssssse help me with this.

  Thank you very much...

  Uninstall both drivers.

  Resources:

  Uninstall or change a program on Vista
  

  Uninstall Intel® PROSet/Wireless Software

  When Yiu will make that install drivers from the bottom:

  Intel chipset (Install and reboot before other drivers) here

  Intel Wireless 5100 here

  Realtek RTL8168C Family PCI - E Fast Ethernet NIC here

• emergency assistance in access to bitmaps

  Project

  The navigation click methodm, check the field that has the current focus and launch the screen accordingly.

• BlackBerry 10 cannot transfer conversations SMS on Z30 - emergency assistance please

  Hello

  I will in a court battle and must-have my SMS INTEGER of a customer conversation.  Take screenshots, this is not an acceptable alternative.  Dispatch of the individual parts is not acceptable either.  I can't seem to do a "select all" and then paste it into an email.

  I found options specifying how to proceed by extracting from the backup file, but whenever I try to save my Z30 I get the message:

  Backup did not complete:
  Make sure your device is on and connected to the Blackberry Link and try again.

  This incredibly frusterating.  Not only am I trying to do something that I think should be EXTREMELY easy, convoluted to do is also broken.  I tried to solve the backup error and found that is extremely common.  I tried to delete all unnecessary files, including all my music, videos, photos, etc., no dice.

  My ultimate goal is to get this converation SMS sent to myself and it's very urgent.  If anyone can help make me this help please.

  Thank you.

  In the end, I downloaded a paid app from the Blackberry store for 3.99 exporter called.  Would have liked to do it for free, but I have to admit, the app is pretty slick and does exactly what I wanted.

  Thanks for trying.