Using Unified Wireless network needed emergency assistance

Similar Questions

• How to check who is using my wireless network?

  I just want to be sure that no one is using my wireless network... I know I did a password to get access to it, but is their way to check if its working?

  In addition, when I went under network settings

  I found something that is called gateway residential... don't remember really see it, but when I go in there, it shows something called teredo... and it has an IP different than my router... no idea what it could be?

  Disabling Wireless SSID Broadcast will arrange this?  making it not visible by anyone but me?

  If you are using WPA or WPA2 and a strong password, nobody is your wireless network, except you.  Anyone who has the skills, computer power supply, time and determination to break into such a system is busy breaking in banks, not your home router.   Then don't worry about this.

  You can check that your router is using WPA or WPA2 and your password by:

  (1) connecting your router 192.168.1.1 and ranging in the wireless section and check that the WPA or WPA2 encryption is turned on and that your password is entered.

  (2) you can check that the router is working by connecting wireless using the password.

  (3) you can check that you have connected to your router first getting a wireless Internet connect, then unplug your router and check that the Internet suddenly not working.

  "teredo tunneling" is a way to move to IPv6 info from an IPv4 router.  Don't worry about this.

  Do not "SSID Broadcast" set to 'off '.  With modern methods of piracy, that old thing of security is now worthless.  Furthermore many wireless adapters have problems connecting to routers that broadcast their SSID not, so it might cause you problems of network.   If you are using WPA or WPA2 and a strong password, who cares if someone sees your SSID?   Without your password, they cannot connect wirelessly to your router.

  I mean, strong password, at least 24 characters random, including uppercase, lowercase and numbers.  Although I recommend 24, or 12 is almost impossible to crack.

• Problems connecting to the internet using the wireless network connection

  I can't connect to the internet using my wireless network connection. I had made the diagnosis and he stated that "the DHCP is not enabled for the wireless network connection. I had checked the DHCP, but it has been activated!... Someone would give any suggestion for me to solve the problem?

  Open the run command box by pressing Windows key + R, type services.msc and press enter . Search The Client DHCP and check if it is enabled or disabled. If disabled then turn it on and see if the problem still persists or not.

  Open the run command box by pressing Windows key + R, type cmd , and press enter . At the command prompt, type ipconfig/all and press ENTER. Now, check the IP address, default gateway, DNS etc. If you find all the information is correct, but you cannot yet access the Internet so if you connect the wireless network is secure or not. To determine the glance to the wireless network icon in the taskbar, then click on it. It will show you the available wireless networks. If there is a "yellow shield" present on the network icon, the network is not guaranteed, if there is no "yellow shield" does while the network is secure. In a secure network, you might have a "network security key. In this case try to disable the 'Network security key' option for this network. To do this:

  Open Control Panel , click network and Internet , click network and sharing Center , click manage wireless networks on the left.

  In the list select the wireless network and do a right click, select Properties, Security disable tab all options that is, in security type do not select no authentication (Open) and to the type of encryption , select none . You can also activate the automatic connection and SSID settings to further enhance connectivity, on the connection tab, click to select the "connect automatically if this network is in range " and "check boxesto connect even if the network is broadcasting his name (SSID) .

  For more information click here and see how you can determine whether a network is secure or not.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-know-if-a-wireless-network-is-secure

  If the problem still persists, then check your firewall settings and make sure that the firewall is not blocking your Internet connection. Some software Antivirus has a built-in firewall and they block by default all unknown connection to the tightening of security.

  Try to restore Windows Firewall default settings. Open Control Panel click on network and Internet , click system and security , click Windows Firewall , click default settings .

  Hope this will help. Thank you.

  Arup Ratan Paul

• Using Zyxel wireless network configuration

  Using Panel to have Windows configure my system to use a wireless connection to internet via Zyxel USB. Using Windows options, network, Network Setup and configuration of wireless network connection me don't upset none the case. I understand there is a way that Windows will automatically connect. I need to update my Windows? I would like assistance. Bill

  Thanks for the information.

  No, you don't need an update.

  I do not understand your answer to no. 5, in particular "the material was not recognized by Windows, it requires a manual boot without Windows manages the connection of the device to the router."

  In Windows, there are basically two ways that a wireless adapter can be controlled.  Windows can control the unit by using a feature called 'Wireless Zero Configuration' or a utility provided by the manufacturer of the card.  As a general rule, you want one or the other - not both active at the same time.

  If the icon you are referencing is a 'Z' in a box (http://tinyurl.com/cjn3mje), then the Zyxel utility is in charge.   Which is perfectly OK (and probably provides more features than Windows WZC), but I'm not familiar with the details of using the Zyxel utility.  If you identify the model of your adapter, I can see if I can find his online user manual, and explain the steps you need to take

  If you use the Zyxel or Windows WZC utility, you must take the basic steps are the same:

  1. search for available wireless networks.
  2. identify your network in the list that is displayed (this is your SSID or 'Network name')
  3. click on "sign in".
  4. Enter the encryption password when you are prompted.

  Did you do the above?  That's happened?

  Additional information:

  Windows WZC automatically saves the connection (SSID and password) information once you connect successfully.  I don't know if the Zyxel utility done automatically or if you explicitly save a 'profile' with the data.

  Any utility that you use, you must know the SSID of your router and the password for the encryption.  Verizon technology that installed your router should provide you with this information.  It can also be written on a label on the bottom of the router.

  If you do not have - or lost - this information, you can find it by connecting to the router.  Preferably, you should do this using an Ethernet cable - assuming you can get your computer back close enough to the router.  You will need to know the name of user and password to connect to the router.  Again, Verizon technology would have to provide this information for you.

  As far as I can determine '20.10.7' is the revision number of the firmware of your router.  I believe - but am not sure - that the user guide is here--> http://www.actiontec.com/support/doc_files/MI424WR_Rev._E&F_User_Manual_20.10.7_v1_GPL.pdf

• The use of wireless network on Windows XP mode?

  My OS is MS.windows 7 Pro. / 32-bit. And I have already installed windows XP mode.  Right now I can access to the Wireless network & cable on window 7 mode but I can access the network only by cable on window XP mode (because the wireless adapter are not yet on the taskbar. How do I do?

  Configure Virtual PC to use the host PC wireless network adapter:

  1. turn off the Virtual PC.
  2. click on Start > all programs > Windows Virtual PC >Windows Virtual PC .
  3. right click Windows XP Mode.vmcx and click settings .
  4. click on the network .
  5. the value 2 adapter adapter wireless network from the host PC.
  6. click on OK .

  Then start the virtual machine. Boulder computer Maven
  Most Microsoft Valuable Professional

• Satellite P20 S203: How can I use the wireless network card?

  Hello
  first - sorry for my English. I have toshiba P20 S203 (I know - old hardware).
  I read a few descriptions on this computer and I know that the model probably have wifi. I see on the left side of my laptop, but don't see it Win Xp Pro Sp2.
  How to turn on and connect to my lan wirreless?

  again sorry for my English...

  Hello

  As mentioned the laptop has no installed wireless network card, but you can improve with one compatible.
  The minPCI card has two cables; Brown and white.
  Usually the white cable be connected to the hand and Brown to the

• Portege 7220: Can I use the wireless network?

  Hello, I think to buy a Portege 7220 but need to know if it is possible to connect wireless to my office. I know how to configure the desktop computer, but I'm not yet sure on laptops. Do I need a pcmcia card? or something like that?
  Thanks in advance for any response.

  Hi, Sandra

  You are right. If you want to use the WLAN you PCMCIA WLAN card. You can buy it in every store of PC.

• Satellite 2450-201: do I have to use the wireless network?

  Help, please. I understand that I am owner of an old computer, but I'm really confused re wireless. Please could someone tell me what I need to buy to enable me to make my computer wireless.

  [Edited by: admin on 18 February 06 08:25]

  Hello

  First of all, you need a wireless router to use wireless LAN.
  I put t know what internet equipment you use but I have connected my router wireless modem broadband.
  Detailed instructions should be supplied with the router.
  Well, you also need the minPCI wireless card or a USB wireless or a PCMCIA wireless card to connect to the wireless router.

• Cable connection part for good - once I started using the wireless NETWORK card!

  Hello

  I went although all people in support on this issue, but now I have no other choice than to ask all you people here!

  That is the problem. I have two computers with multiple network cards. One is a laptop computer with wireless Draft-N support and 10/100/1000 NIC onboard. The other is a desktop computer with an ASUS Wifi b/g edge and also dual GigE ports nVidia graphics card.

  Whenever I try to use network wired for internet or local network even cards use, it died on me. It is impossible to obtain an IP address from the router to use and is unable to communicate with anyone at all. Not even with my local network or even directly to the router (192.168.1.1). If I turn on the wireless card, it connects and everything is groovy (except that I lost my GigE connection to my local network, which is most important!).

  I havegone through the standard fare of cyclic power to the router and cable modem, reboot of my machines, etc. all the normal things, we are required to do.

  After some hassles with the support of Linksys to get them to send me a new WRT330N, I finally received a new WRT310N and it shows exactly the same problem! Wireless connections work fine, but as soon as I disable the WiFi and wired go, Windows XP gives me nothing else than a message "limited or no connectivity" and let me out of the network.

  This leads me to think it's some sort of network problem due to multiple MACs on the same host name. Does anyone know how to get around this problem?

  Thank you!

  Disable the firewall on the computer and then also try to connect the computer to the modem and check if the computer is able to connect.

• Can not use the wireless network card after the upgrade to Windows XP Home SP3 on Satellite Pro 4600 edition

  Hello

  This is my setup
  Computer: Satellite Pro 4600 model ps460e 02hyt en
  Operating system: Windows XP SP3
  Mini pci wireless lan card: pa3070u - 1mpc mpci3a-20

  My problem:
  The operating system has been improved in win 98se to windows XP SP3.
  The mini pci wireless lan card does not work I try to download the right drivers but I have a big problem all driver downloads does not work. I don't know the physical name of the Council.
  Where can I find a solution for the update of these drivers? Is it possible that the mini pci wireless lan card does not work with windows XP SP3?

  Please I wait your help

  Thank you

  [email protected]

  I imagine that it will be compatible with SP2 well. You can test it please and post the result?

• LaserJet P1102W: [RESOLVED] LaserJet P1102W does not connect to a wireless network on Mac

  UPDATE: the below solution worked on my MacBook, both running El Capitan. Ignore the instructions provided in the manual of the P1102W and follow the steps below.

  I have a P1102W printer.

  Recently my LaserJet P1102W refuses to connect to networks using WPA Wireless.

  As it does not have an IP address, I can't access the web server.

  She also does not connect to my Mac Wireless via Bonjour. The printer will install when connected via USB.

  I installed printer HP Apple drivers, that contains the P1100 driver.

  The P1102W worked before wireless. I only noticed this anomaly since installation El Capitan and moving the printer to another room with my workstation.

  I need the printer to use the wireless network, as I did not have enough space on my desk for him. And I just can't place it anywhere within the range of a USB cable.

  Are there alternatives to this?

  Hi @rcosgrove,

  Welcome to the Forums of HP Support!

  I see that you encounter some problems connecting your Laserjet P1102w printer to your network wireless using your Mac computer. I can help you with that.

  First of all, I would like to mention that it would be easier to the printer connected to your network using a Windows PC. If you can't borrow or use a Windows PC, the following steps should allow you to connect the printer. If you can borrow a PC, please let me know what version of Windows and I can provide a link to the drivers to configure the printer automatically.

  Preparation of the printer

  1. Turn the printer off.
  2. While the printer is turned off, hold down the two buttons on top of the printer.
  3. Hold the buttons on top of the printer and the printer.
  4. Hold down the maintained for even 10 seconds.

  Wireless printer setting

  1. Make sure that the printer is connected to your Mac via the USB cable.
  2. Click on your Apple icon, system preferences and printers and Scanners.
  3. Click the icon of your printer on the left.
  4. Click Open print queue, printer installation, utility of printer, open printer and HTML Config utility.
  5. (If the above step generates an error, change your default browser on Safari. Please let me know if you need assistance with that).
  6. In this new window, click on the networking and wireless tab on the left.
  7. Under Mode of Communication, select Infrastructure.
  8. Select your network from the list and then click on the button with the arrows.
  9. Under Security Mode, select WPA/WPA 2. If you have an old router, you may need to select WEP instead.
  10. Enter your password wireless in the field below.
  11. Click on apply.

  Now, wait a few minutes. Your printer must change to have a solid blue light. If it is not the case, either the password has been entered incorrectly or there is a setting on the router that the printer is having a resolution of the issue. Please let me know if this is the case.

  Once you have a solid blue light:

  1. Unplug the USB cable.
  2. Return to the printers and Scanners.
  3. Hold down the CTRL key and click the icon of the printer on the left.
  4. Click on reset printing system.
  5. Click on the button "+" in the lower left corner.
  6. In this window, select your printer in the list.
  7. Click in the box next to and select your printer from the list.
  8. Click on Add.

  Please let me know if you are able of print or the results after following the above. If you can print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope this information is useful. Please reply to this message with the results. Good luck!

• Certificates and Unified Wireless

  Hi people,

  I am currently deploy a unified wireless network and that you have run into a bit of a problem with certificates - unfortunately they aren't my specialist subject!

  We will deploy two wireless networks (comments and Corp comments) will be tunnel to a dedicated WLC and Corp. will REAP: break-out to the local network with authentication PEAP against AD (via Cisco ACS).  We will have 7 WLCs (including anchor comments) that will be managed by the WCS.

  The problems I face with certificates, it's that I don't know how and where to place them - it is my understanding:

  cert 1 x GBA for AD authentication

  1 cert of x on the WCS for the connection of the Web page (to stop the alert cert)

  1 x mobility anchor cert (to stop the alert cert for guest access)

  I guess that since the other WLC will not be recorded on they do not need a cert that everything will be done through WCS and comments "web-auth" page is served rather than the WLC mobility anchor central 6?

  Ideally, we don't want warnings cert to appear as that will generate the number of calls from users, only for us to tell them "just click ok and it'll be fine"

  I'm trying to know if we have a certification authority internal, can I use to get certificates for the WCS and ACS that will sort the internal clients, then an 'external' for guests cert.

  Worst case, we would need to get the 'external' certs for all three, but I'm confused as to how it works as our internal domain is a 'private' name [example.private] rather than a public .com [example.com]

  Any guideance you can give to would be great!

  Thanks in advance

  KeV

  Well, if you have a domestic certification authority and it is in the store root approved devices, you won't this certificate error message.  If you go with a 3rd party certificate, then you can go the road that you have:

  cert 1 x GBA for AD authentication

  1 cert of x on the WCS for the connection of the Web page (to stop the alert cert)

  1 x mobility anchor cert (to stop the alert cert for guest access)

  Or if you want less of certificates, you can do this:

  1 cert x the GBA for AD authentication and mobility anchor (to stop the alert cert for guest access)

  1 cert of x on the WCS for the connection of the Web page (to stop the alert cert)

  Just use a name CN which is general... like wifi.private or something like that.

  Scott

• Wireless network does not work when I put a password

  Well actually, I use a wireless network at home, and when I try to put a password, it won't let me connect to the internet, but my xbox connect when there is a password there and other laptops don't. When I try to connect by using a non-secure network it connects to the internet, but on any other laptop but mine it asks me to set up the connection, while on my laptop, it goes straight to a connection.

  If you guys can offer me a solution to this problem, I would be very grateful

  Hi Sh4dow,

  You can check out the following link and check if it helps:

  View your preferred wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/view-your-preferred-wireless-networks

  You can also temporarily disable the security software and firewall installed on the system and check if the problem persists. If this resolves the problem, then you may need to update or change the settings of the security software.

  Note: Be sure to enable the security software on the computer after checking.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I forgot the password to the wireless network

  Try using my wireless network, but I forgot my password.

  I'm sorry, but the strategy of microsoft in these forums is that without assistance will be given about lost or forgotten passwords

  read the policy at the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• Wireless network has welcomed, for users of Satellite A200

  After studying the issue for a year without result, I'm always hoping if Toshiba can provide a work around for the WLAN hosted in models A200 with Atheros 5007EG adapter on Windows Vista.

  The last driver wireless lan in archive of drivers A200s turned out be v12.2.0.11.3 where it says "Connect to your wireless access Point or to another PC wireless using your wireless network card" and Windows Vista turns out to be ground BONE for this driver. However, the provided url takes us to https://aps.toshiba-tro.de/wlan/ where v7.7.0.288.0 is available for Vista.

  I tried this driver several times but could not get the features mentioned.

  From my point of few this isn t Toshiba issue since the isn t Atheros driver created by Toshiba but Qualcomm.

  In addition, I noticed that drivers for old notebooks abandoned will not be updated.

  Last but not least if you want to use your laptop as a hot spot, I recommend the software 3rd party as a freeware tool called Virtual Router Wi - Fi or WiFi HotSpot Creator. It should work even with your Vista system

  PS: Why you n t switch to Win 7. Much better than Vista