DNS and multitenant

Similar Questions

• my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• Requirement of DNS and DHCP Server Essentials 2012 home

  I have a Server Windows Essentials 2012 acting as DNS and DHCP server with a domain name for backups etc on my home network. It's that everything works fine, no errors, no problem. Works well actually, telling me when the children did not install updates or restarted.

  I have two groups of users. My sons step, 10 and 12, which I want to use OpenDNS as a provider external DNS with a policy very, very limited and my wife and me who want to use indications of root or Google DNS or any other DNS provider. Others, specific devices no user (box of the xBox, WII, Satellite, TV, CCTV etc.) can use.

  Before the 2012 server, I had a 2 k 3 server running in a virtual machine for DHCP, alone and put my wife and my devices on static reservations with the just and external DNS provider used OpenDNS as the default scope, DNS. Unfortunately different bits of domain services 2012 don't seem to work unless the server of 2012 is the first DNS server listed on client machines (backups failed. Impossible to find other local computers). Currently, this means that we are all using OpenDNS.

  What I would like is a way to say 2012 to send adult group DNS queries to another DNS provider and leave the rest at default to OpenDNS, while still having them register in the original DNS domain. Any suggestions?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Laptops acquire wrong address DHCP, DNS and gateway wireless

  I have problems with two laptops. For some strange both acquire the bad DHCP, DNS and gateway (server) respond when I try to access the Internet via Wi - Fi. For some reason, this does not happen when I use the LAN (cable) connection.

  that is instead to fetch the address: 133.24.56.78 (no real address), the system retrieves / uses 111.22.33.44 (again, not a real address). BTW, these two systems are configured to fetch automatically get IP addresses and DHCP. I tried to fix the connection in both cases, but it did not work.

  What can I do to fix this?

  Problem solved.

  I changed the router to WEP (WPA - PSK) encryption.

• DNS and static translations

  I have a web server on my dmz. On the demilitarized zone, the computers cannot be accessed by name. The problem is that DNS returns the ip (real) outside. I need the demilitarized zone to translate it into a local ip address. I use the MDP so I'm not using aliases. Any help would be appreciated.

  You can do this with the [static] commands and the "dns" option

  static (dmz, outside) 123.123.123.123 192.168.1.1 dns netmask 255.255.255.255 [keyword dns tells the pix to DNS doctoring for this translation because DNS resolves the public IP address]

  static (dmz, inside) 123.123.123.123 192.168.1.1 subnet 255.255.255.255 mask [allows the internal hosts to connect to the public IP found in DNS and it translates the private IP on the way to the demilitarized zone]

  Make sure you do a [clear xlate] after the changes.

  If you are running under 6.2, you will have to make any [alias] on the Pix.

• How to start Alerts notification to visitors using the DNS and IP society?

  1. I need to configure alerts for notification of visitor using the society of DNS and IP? How to do this?

  2 - second thing is what is the common use of DNS and IP society in the fields of account?

  Thank you

  Nabila,

  It is largely something E9 - the notification feature a much simpler with Profiler (Yes, there is a separate fee)

  without prospect Profiler: (I think I have the actual documentation at my office - will check once I'm back from #mme15 )

  1. go to settings, profiles of visitors, then change your display to show the fields you want to see.  Since you ask specifically about DNS and IP address, the view of the "technical information" is a good starting point.

  

  2. go into Setup and default user settings for users, configurations of Notification to visitors.  You can use the default or create new (lower right corner)

  Specify the view you want to use.  You can also create a custom for this notification by electronic mail header.

  3. go to settings, Notifications

  

  Configure your notification rules.

  

  for your second question - common use of DNS and IP name in the account fields, I don't think that there is a "common use" since the visitor record will show exactly the IP address and most organizations have a range of IP addresses, any sort of comparison of the visitor to the account is difficult.

  If your use case must match their account of visitors, e-mail domain is much easier.  Create a field on the Contact and account for the 'area of email address', a string manipulation cloud app to take the email address and delete everything before him ' @' accounts will be filled with the domain via a data load (or you can approach with a rule/validation rule set update to the name of the company (, remove the spaces and special characters and add with ".com")

  You could then: linking contacts to accounts using this field (will need to ensure that duplicate any record company) or use a rule of Match/deduplication to enter the values for the table of the company to update the contact. (or vice versa)

  I hope this helps.

  Nathan

• The fields 'Name' and 'Domain' to 'DNS and routing configuration/host Identification' are always in gray

  In VI3, I used to change the settings of the host DNS (host and domain name) to the tab 'DNS and routing' - & gt; "Identification of home." Even more, if the DNS and DHCP are configured correctly in the environment, there is no need to set these values manually - they were discovered automatically. The story is defferent in vSphere 4. I still have the set of fields 'Name' by 'localhost' and 'Domain' field is empty. And I can't change them - they are grey.

  Seems that the host is still able to discover its hostname automatically. I see the proper name in the (left pane of vSphere Client) console tree. But these values are not met the 'DNS and routing' tab and I can't put them manually.

  This is normal and how do I use these fields now?

  Yes, you're right. It's a little strange, but it works this way in vSphere now.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• Where can I find the options to configure the IP address, gateway, DNS and network mask for my ethernet connection?

  original title: Ethernet configuration

  How/where can I find blue page that displays: IP address, gateway, subnet mask, DNS

  Hi Dr. Pasquale,

  ·         Are what blue page you referring?

  If you need to find the IP address of your computer you can use the prompt to to do. You have ti use the ipconfig command to get the details.

  a. Click Start, click Run.

  b. type cmd and press ENTER.

  c. type ipconfig and press ENTER.

  See the following articles for more information.

  Microsoft Windows XP: Ipconfig

  The syntax and Options for using the Ipconfig Diagnostic Utility for network connections

  If this isn't what you're looking for then respond with more information so we can help you best.

• What is the most important of the "connection specific suffix DNS" and how to change (update) it?

  When you're wondering why the downloads were sometimes slow, I checked the operatinginstructions wireless driver (which I've updated), then the IP config.  Notice the suffix DNS specific connection set to a provider I use is no longer.
  Does it really matter whether fixed (portable moving)?  And if not, how one change it?

  System: Dell Precision M4300
  Windows Vista Ultimate - Ran ipconfig

  Microsoft Windows [Version 6.0.6002]
  Copyright (c) 2006 Microsoft Corporation.  All rights reserved.
  Windows IP configuration

  Bluetooth network connection Ethernet card:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Wireless network connection Wireless LAN adapter:
  The connection-specific DNS suffix. : nycap.rr.com

  Link-local IPv6 Address...: fe80::3063:1611:9d1b:bf69% 11
  IPv4 address...: 192.168.1.100
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.

  Ethernet connection to the Local network card:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 6:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 7:
  The connection-specific DNS suffix. :
  IPv6 address: 2001:0:4137:9e50:2081:31db:3f57:fe9b
  Link-local IPv6 Address...: fe80::2081:31db:3f57:fe9b 12%
  ... Default gateway. : ::

  Card tunnel Local Area Connection * 13:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 14:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. : nycap.rr.com

  I moved about 6 months ago and I'm going through is no longer nycap.rr.com.  Instead, I use nc.rr.com

  Hi HS Abdallah,

  Thank you for posting!

  You can specify the DNS suffixes specific connections for adapters configured statically and configured in DHCP on the DNS tab in the Advanced TCP/IP settings dialog box. In this dialog box, you can also specify if the customer is using its DNS suffix specific connections in addition to its primary DNS suffix
  See the article configure a connection-specific DNS suffix
  http://support.Microsoft.com/kb/305553

  Thank you and best regards,
  Abdelouahab Microsoft responds to the technical support engineer

• PIX506 problem, DNS and server Eachange Cofiguration!

  Hi, Expert everyone!

  I can't write ENGLISH well, that this will cause a problem of communication for YOU.

  I meet a problem to configure the firewall to PIX506.

  I have a firewall PIX506 and NETGEAR RP614 IP-sharer.

  Under PIX506 firewall, there are two Windows servers.

  A Windows 2000 Server is the Web server and DNS, a different Exchange 2003 server based on Windows 2003 server.

  But the problem is...

  I do not receive an email, please send an e-mail very well!

  I have document attached on PIX506 config and my network diagram.

  It's a crazy problem.

  Please please please help me, get Expert everyone.

  UPS, I just see that you also have a syntax error in the access list. You have to put your external IPs don't keep ones.

  Change your access list to:

  acl_out list access permit tcp any host 10.0.0.4 eq pop3

  acl_out list access permit tcp any host 10.0.0.4 eq smtp

  acl_out list access permit tcp any host 10.0.0.3 eq www

  acl_out tcp allowed access list any domain host 10.0.0.3 EQ

  Once again for really need NT DNS (Zone transfer) to resolve names, you need udp 53.

  sincerely

  Patrick

• View, Split DNS and SSL Certs HELP

  We have:

  1. Internal security server - not on the domain, IP address of the 10.121.125.110 and the external address of 209.68.96.26
     1. Installed SSL certificate for view.victorschools.org
        
     2. View.victorschools.org DNS entry to 209.68.96.26
        
  2. Broker server - the field, has internal IP address of the 10.121.127.107
     1. Installed SSL certificate for broker.vcs.local
        
     2. Broker.vcs.local DNS entry to 10.121.125.107
        
     3. View.victorschools.org DNS entry to 10.121.125.107
        

  The problem arises on two fronts:

  1. Portable professor who has installed the view client pointing at view.victorschools.org. Internally, that the DNS entry pointing to the broker server that has the broker.vcs.local cert. Unless the client is configured to check no certs, the connection will not work. When we try us immediately returns with a cert mismatch error.
     
  2. Personal devices - student charge the Customer View on a laptop or iPad and it points to view.victorschools.org. It works fine at home, but even once will not work on campus because there is an incompatibility of cert
     

  Can I solve this problem by changing a DNS entry and have view.victorschools.org point to 10.121.125.110 which is the internal IP address of the Security Server? Of course, this will make any student with a personal device point to our security at home or school server. I know we want internal devices to point to the broker and external clients to point to the Security server. Here is a discussion of the same thing, I feel less the number of SSL certificate.

  http://communities.VMware.com/thread/431399

  I know that a windows CA to generate certificates with Subject Alternative names (SAN). Can we generate a cert from our CA window for broker.vcs.local and view.victorschools.org and install it on the server broker to solve this problem?

  Replace the SSL on broker a SAN certificate.

  If you route everything through the Security Server, you create a single point of failure, not to mention a bottleneck in the network.

• DNS and routing

  Hi Everyboady I'm quite new to vmware esxi and I'm not sure of what the parameters of information to the host dns name.

  What is my dns from the router or my example custom dns:

  domain controller

  can someboady tell how can I do this for personal watercraft

  Thank you

  Khaled Lekshmen

  Hello

  You must add the host name of your ESXi host on your DNS server. After that, your PC of management should be able to resolve the hostname to its IP address. Then, you connect the VI client software to your ESXi host using its DNS name instead of having to use the IP address.

• Firefox loses Internet every 5-10 minutes (as for example, Skype does not work), and the only way to solve this is to reset the network adapter (reset DNS and get the new IP address?)

  I click with the right button on the icon of the network adapter and press "fix." After that, I can browse sites for 5-15 minutes. But then the story repeats itself. And all of this can happen while I will have a video chat on Skype, so the internet connection is OK.

  • Try this.
  • Type in the bar of address about: config.
  • Accept the warning.
  • On the page that appears, in the filter box, type Network.http.Max - connections.
  • Replace the value 32 (which is probably the value 256 in your case).
  • Close the topic: config page.
  • Restart the browser.

• HTTP connection fails systematically with dns and tunnel errors

  I read this article:

  http://supportforums.BlackBerry.com/T5/Java-development/different-ways-to-make-an-HTTP-or-socket-con...

  I want to connect to a url through http, but I always get failure DNSException or tunnel. I tried all kinds of connection string suffix = '; deviceside = true ","; deviceside = false ', '; deviceside = true; "apn = apn I pulled from service book which was"blackberry.net "", ""; deviceside = true; ConnectionUID = "once what I found in the book of service using the method of section" yet.

  The device is bold 9780 with data plan. I can open the url of the browser

  The same code works on 9000 "BOLD" without mistakes and I can access the url

  Any suggestions

  It turns out that you can't create a connection during a phone conversation, connection all attempts fail after the time-out is reached and after the end of the phone call connections are successful.

• ILM and Multitenant

  I heard that ORACLE Information Lifecycle Management (heatmap, ADO) does not work with the plug-in Multittenant ORACLE database. Is this correct?

  Yes, it will only work ith NO CDB database.