DNS problems when VPN Client connection is Active

Using the latest version of the Cisco VPN client. Support remote clients... when I VPN on client sites I lose connectivity to my local exchange server. The DNS client appears to become primary on a VPN connection, where he bring himself to the public address of our exchange server. In the Transport settings, I have "allow LAN access. Any help would be appreciated. Thank you.

Whether or not the local lan access is allowed is a setting on the device remote, not only to your customer. To see if you get local lan access, look under the tab Details of statistics and the road.

Tags: Cisco Security

Similar Questions

Problem with VPN client connecting the PIX of IPSec.

PIX # 17 Sep 14:58:51 [IKEv1 DEBUG]: IP = Y, IKE Peer included IKE fragmentation capability flags: Main Mode: real aggressive Mode: false

Sep 17 14:58:51 [IKEv1]: IP = Y, landed on tunnel_group connection

Sep 17 14:58:51 [IKEv1 DEBUG]: Group = X, IP = Y, IKE SA proposal # 1, transform # 13 entry overall IKE acceptable matches # 1

Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, the authenticated user (X).

Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, mode of transaction attribute not supported received: 5

Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, Y = IP, Type of customer: Client Windows NT Version of the Application: 5.0.06.0160

Sep 17 14:58:58 [IKEv1]: Group = Xe, Username = X, IP = Y, assigned private IP 10.0.1.7 remote user address

Sep 17 14:58:58 [IKEv1 DEBUG]: Group = X, Username = X, IP = Y, fast Mode resumed treatment, Cert/Trans Exch/RM IDDM

Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, PHASE 1 COMPLETED

Sep 17 14:58:58 [IKEv1]: IP = Y, Keep-alive type for this connection: DPD

Sep 17 14:58:58 [IKEv1 DEBUG]: Group = X, Username = X, Y = IP, timer to generate a new key to start P1: 6840 seconds.

Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, Y = IP, data received in payload ID remote Proxy Host: address 10.0.1.7, protocol 0, Port 0

Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, received data IP Proxy local subnet in payload ID: address 0.0.0.0 Mask 0.0.0.0, protocol 0, Port 0

Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, his old QM IsRekeyed not found addr

Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, Y = IP, remote peer IKE configured crypto card: outside_dyn_map

Sep 17 14:58:58 [IKEv1 DEBUG]: Group = X, Username = X, Y = IP, IPSec processing SA payload

Sep 17 14:58:58 [IKEv1 DEBUG]: Group = X, Username = X, Y = IP, IPSec SA proposal # 14, turn # 1 entry overall SA IPSec acceptable matches # 20

Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, IKE: asking SPI!

Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, Y = IP, IPSec initiator of the substitution of regeneration of the key duration to 2147483 to 7200 seconds

Sep 17 14:58:58 [IKEv1 DEBUG]: Group = X, Username = X, IP = Y, passing the Id of the Proxy:

Remote host: 10.0.1.7 Protocol Port 0 0

Local subnet: 0.0.0.0 mask 0.0.0.0 Protocol Port 0 0

Sep 17 14:58:58 [IKEv1 DEBUG]: Group = X, Username = X, IP = notification sending answering MACHINE service LIFE of the initiator

Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, the security negotiation is complete for the user (slalanne) answering machine, Inbound SPI = 0 x 6

044adb5, outbound SPI = 0xcd82f95e

Sep 17 14:58:58 [IKEv1 DEBUG]: Group = X, Username = X, Y = IP, timer to generate a new key to start P2: 6840 seconds.

Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, adding static route to the customer's address: 10.0.1.7

Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, PHASE 2 COMPLETED (msgid = c4d80320)

PIX # 17 Sep 14:59:40 [IKEv1]: Group = X, Username = X, Y = IP, Connection over for homologous X. Reason: Peer terminate remote Proxy 10.0.1.7, 0.0.0.0Sep Proxy Local 17 14:59:40 [IKEv1 DEBUG]: Group = X, Username = X, IP = Y, IKE removing SA: 10.0.1.7 Remote Proxy, Proxy Local 0.0.0.0

Sep 17 14:59:40 [IKEv1]: IP = Y, encrypted packet received with any HIS correspondent, drop

Then debugging IPSec are also normal.

Now this user is a disconnect and other clients to connect normally. the former user is trying to connect to the site and here is the difference in debugging:

Sep 17 14:25:22 [IKEv1]: Group = X, Username = X, Y = IP, tunnel IPSec rejecting: no entry card crypto for remote proxy proxy 10.0.1.8/255.255.255.255/0/0 local 0.0.0.0/0.0.0.0/0/0 on the interface outside
Sep 17 14:25:22 [IKEv1]: Group = X, Username = X, IP = Y, error QM WSF (P2 struct & 0x2a5fd68, mess id 0x16b59315).
Sep 17 14:25:22 [IKEv1 DEBUG]: Group = X, Username = X, IP = O, case of mistaken IKE responder QM WSF (struct & 0x2a5fd68) , :
QM_DONE, EV_ERROR--> QM_BLD_MSG2, EV_NEGO_SA--> QM_BLD_MSG2, EV_IS_REKEY--> QM_BL
D_MSG2, EV_CONFIRM_SA--> QM_BLD_MSG2, EV_PROC_MSG--> QM_BLD_MSG2, EV_HASH_OK--> QM_
BLD_MSG2, NullEvent--> QM_BLD_MSG2, EV_COMP_HASH
Sep 17 14:25:22 [IKEv1]: Group = X, Username = X, IP = Y, peer table correlator withdrawal failed, no match!
Sep 17 14:25:22 [IKEv1]: IP = Y, encrypted packet received with any HIS correspondent, drop

Here is the config VPN... and I don't see what the problem is:

Dynamic crypto map outside_dyn_map 20 match address outside_cryptomap_dyn_20
Crypto-map dynamic outside_dyn_map 20 the transform-set ESP-DES-MD5 value
life together - the association of security crypto dynamic-map outside_dyn_map 20 seconds 7200
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
ISAKMP crypto identity hostname
crypto ISAKMP allow outside
crypto ISAKMP policy 20
preshared authentication
the Encryption
md5 hash
Group 2
life 7200
crypto ISAKMP policy 65535
preshared authentication
the Encryption
sha hash
Group 2
life 86400

outside_cryptomap_dyn_20 list of allowed ip extended access any 10.0.1.0 255.255.255.248

attributes global-tunnel-group DefaultRAGroup
authentication-server-group (outside LOCAL)
Type-X group tunnel ipsec-ra
tunnel-group X general attributes
address pool addresses
authentication-server-group (outside LOCAL)
Group Policy - by default-X
tunnel-group X ipsec-attributes
pre-shared-key *.
context of prompt hostname

mask of 10.0.1.6 - 10.0.1.40 IP local pool 255.255.255.0

Please remove the acl of the dynamic encryption card crypto, it causes odd behavior

try to use split instead of the acl acl in dynamic crypto map, and let me know how it goes

PIX: Cisco VPN Client connects but no routing

Hello

We have a Cisco PIX 515 with software 7.1 (2). He accepts Cisco VPN Client connections with no problems, but no routing does to internal networks directly connected to the PIX. For example, my PC is affected by the IP 172.16.2.57 and then ping does not respond to internal Windows server 172.16.0.12 or trying to RDP. The most irritating thing is that these attempts are recorded in the system log, but always ended with "SYN timeout", as follows:

2009-01-06 23:23:01 Local4.Info 217.15.42.214% 302013-6-PIX: built 3315917 for incoming TCP connections (172.16.2.57/1283) outside:172.16.2.57/1283 inside: ALAI2 / 3389 (ALAI2/3389)

2009-01-06 23:23:31 Local4.Info 217.15.42.214% 302014-6-PIX: TCP connection disassembly 3315917 for outside:172.16.2.57/1283 inside: ALAI2 / 3389 duration 0:00:30 bytes 0 SYN Timeout

2009-01-06 23:23:31 Local4.Debug 217.15.42.214% 7-PIX-609002: duration of disassembly-outside local host: 172.16.2.57 0:00:30

We tried to activate and deactivate "nat-control", "permit same-security-traffic inter-interface" and "permit same-security-traffic intra-interface", but the results are the same: the VPN connection is successfully established, but remote clients cannot reach the internal servers.

I enclose the training concerned in order to understand the problem:

interface Ethernet0

Speed 100

full duplex

nameif outside

security-level 0

IP address xx.yy.zz.tt 255.255.255.240

!

interface Ethernet1

nameif inside

security-level 100

172.16.0.1 IP address 255.255.255.0

!

access extensive list ip 172.16.0.0 inside_nat0_outbound allow 255.255.255.0 172.16.2.56 255.255.255.248

!

access extensive list ip 172.16.0.0 outside_cryptomap_dyn_20 allow 255.255.255.0 172.16.2.56 255.255.255.248

!

VPN_client_group_splitTunnelAcl list standard access allowed 172.16.0.0 255.255.255.0

!

IP local pool pool_vpn_clientes 172.16.2.57 - 172.16.2.62 mask 255.255.255.248

!

NAT-control

Global xx.yy.zz.tt 12 (outside)

NAT (inside) 0-list of access inside_nat0_outbound

NAT (inside) 12 172.16.0.12 255.255.255.255

!

internal VPN_clientes group strategy

attributes of Group Policy VPN_clientes

xxyyzz.NET value by default-field

internal VPN_client_group group strategy

attributes of Group Policy VPN_client_group

Split-tunnel-policy tunnelspecified

value of Split-tunnel-network-list VPN_client_group_splitTunnelAcl

xxyyzz.local value by default-field

!

I join all the details of the cryptographic algorithms because the VPN is successfully completed, as I said at the beginning. In addition, routing tables are irrelevant in my opinion, because the inaccessible hosts are directly connected to the internal LAN of the PIX 515.

Thank you very much.

can you confirm asa have NAT traversal allow otherwise, activate it in asa and vpn clients try again.

PIX / ASA 7.1 and earlier versions

PIX (config) #isakmp nat-traversal 20

PIX / ASA 7.2 (1) and later versions

PIX (config) #crypto isakmp nat-traversal 20

Cisco AnyConnect VPN Client (connection attempt failed because the network or pc problem cisco)

Hi all

I am trying to connect to my Cisco AnyConnect VPN Client but everytime I try, I get an error (connection attempt failed because the network or pc problem cisco)

Can anyone help me please with this.

Thank you

Zia

What is the local firewall on your computer?

Cisco ASA 8.4 (3) remote access VPN - client connects but cannot access inside the network

I have problems to access the resources within the network when connecting with the Cisco VPN client for a version of 8.4 (3) operation of the IOS Cisco ASA 5510. I tried all new NAT 8.4 orders but cannot access the network interior. I can see traffic in newspapers when ping. I can only assume I have NAT evil or it's because the inside interface of the ASA is on the 24th of the same subnet as the network interior? Please see config below, any suggestion would be appreciated. I configured a VPN site to another in this same 5510 and it works well

Thank you

interface Ethernet0/0

Speed 100

full duplex

nameif outside

security-level 0

IP x.x.x.x 255.255.255.240

!

interface Ethernet0/1

Speed 100

full duplex

nameif inside

security-level 100

IP 10.88.10.254 255.255.255.0

!

interface Management0/0

Shutdown

nameif management

security-level 0

no ip address

!

permit same-security-traffic inter-interface

permit same-security-traffic intra-interface

network of the PAT_to_Outside_ClassA object

10.88.0.0 subnet 255.255.0.0

network of the PAT_to_Outside_ClassB object

subnet 172.16.0.0 255.240.0.0

network of the PAT_to_Outside_ClassC object

Subnet 192.168.0.0 255.255.240.0

network of the LocalNetwork object

10.88.0.0 subnet 255.255.0.0

network of the RemoteNetwork1 object

Subnet 192.168.0.0 255.255.0.0

network of the RemoteNetwork2 object

172.16.10.0 subnet 255.255.255.0

network of the RemoteNetwork3 object

10.86.0.0 subnet 255.255.0.0

network of the RemoteNetwork4 object

10.250.1.0 subnet 255.255.255.0

network of the NatExempt object

10.88.10.0 subnet 255.255.255.0

the Site_to_SiteVPN1 object-group network

object-network 192.168.4.0 255.255.254.0

object-network 172.16.10.0 255.255.255.0

object-network 10.0.0.0 255.0.0.0

outside_access_in deny ip extended access list a whole

inside_access_in of access allowed any ip an extended list

11 extended access-list allow ip 10.250.1.0 255.255.255.0 any

outside_1_cryptomap to access extended list ip 10.88.0.0 255.255.0.0 allow object-group Site_to_SiteVPN1

mask 10.250.1.1 - 10.250.1.254 255.255.255.0 IP local pool Admin_Pool

NAT static NatExempt NatExempt of the source (indoor, outdoor)

NAT (inside, outside) static source any any static destination RemoteNetwork4 RemoteNetwork4-route search

NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork1 RemoteNetwork1

NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork2 RemoteNetwork2

NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork3 RemoteNetwork3

NAT (inside, outside) static source LocalNetwork LocalNetwork static destination RemoteNetwork4 RemoteNetwork4-route search

!

network of the PAT_to_Outside_ClassA object

NAT dynamic interface (indoor, outdoor)

network of the PAT_to_Outside_ClassB object

NAT dynamic interface (indoor, outdoor)

network of the PAT_to_Outside_ClassC object

NAT dynamic interface (indoor, outdoor)

Access-group outside_access_in in interface outside

inside_access_in access to the interface inside group

Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1

dynamic-access-policy-registration DfltAccessPolicy

Sysopt connection timewait

Service resetoutside

Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

Crypto ipsec transform-set esp-ikev1 esp-md5-hmac bh-series

Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

Crypto-map dynamic dynmap 10 set pfs

Crypto-map dynamic dynmap 10 set transform-set bh - set ikev1

life together - the association of security crypto dynamic-map dynmap 10 28800 seconds

Crypto-map dynamic dynmap 10 kilobytes of life together - the association of safety 4608000

Crypto-map dynamic dynmap 10 the value reverse-road

card crypto mymap 1 match address outside_1_cryptomap

card crypto mymap 1 set counterpart x.x.x.x

card crypto mymap 1 set transform-set ESP-AES-256-SHA ikev1

card crypto mymap 86400 seconds, 1 lifetime of security association set

map mymap 1 set security-association life crypto kilobytes 4608000

map mymap 100-isakmp ipsec crypto dynamic dynmap

mymap outside crypto map interface

crypto isakmp identity address

Crypto isakmp nat-traversal 30

Crypto ikev1 allow outside

IKEv1 crypto ipsec-over-tcp port 10000

IKEv1 crypto policy 5

preshared authentication

3des encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 10

preshared authentication

3des encryption

sha hash

Group 1

life 86400

IKEv1 crypto policy 50

preshared authentication

the Encryption

md5 hash

Group 2

life 86400

IKEv1 crypto policy 60

preshared authentication

aes-256 encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 70

preshared authentication

aes-256 encryption

sha hash

Group 1

life 86400

IKEv1 crypto policy 90

preshared authentication

aes encryption

sha hash

Group 2

life 86400

Telnet timeout 5

Console timeout 0

management-access inside

a basic threat threat detection

Statistics-list of access threat detection

no statistical threat detection tcp-interception

WebVPN

internal BACKDOORVPN group policy

BACKDOORVPN group policy attributes

value of VPN-filter 11

Ikev1 VPN-tunnel-Protocol

Split-tunnel-policy tunnelall

BH.UK value by default-field

type tunnel-group BACKDOORVPN remote access

attributes global-tunnel-group BACKDOORVPN

address pool Admin_Pool

Group Policy - by default-BACKDOORVPN

IPSec-attributes tunnel-group BACKDOORVPN

IKEv1 pre-shared-key *.

tunnel-group x.x.x.x type ipsec-l2l

tunnel-group ipsec-attributes x.x.x.x

IKEv1 pre-shared-key *.

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

maximum message length automatic of customer

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

Review the ip options

!

global service-policy global_policy

Excellent.

Evaluate the useful ticket.

Thank you

Rizwan James

Linksys Cisco VPN Client connection drops

I have a Linksys BEFVP41 V2. I have a PC running Windows XP SP2 with customer VPN Cisco 5.0.00.0340. I have a problem when I log in the VPN client with my employer network. It seems to be ok. No problem to do the job, hit their proxy server, etc.. All of a sudden, the connection drops. It seems to 'freeze' the network. No surfing, without PuTTY. Sometimes 5 minutes after the connection or 3 hours later. I have to disconnect the VPN connection, and then reconnect. What could be the problem? My MTU is set to 1432. The Windows Firewall has exceptions for ports 10000, 4500 and 62515. I have a network in place at 172.20.x.x... not the default or typical 10.x.x.x network. Firmware is 1.01.04 on the router.

VPN Client connection - Hong Kong to the United States.

We have a PIX 515E with active VPN. In the United States, users have no problem connecting with the VPN client.

However, we have a user in Hong Kong, who has problems. It can connect to the external interface and the connection. The user is assigned an IP address from the pool of reserve, but cannot connect to our server here in the States or internal ping even one of the ip addresses.

Is there another config that needs to be done?

Yes, the do config mode:

ISAKMP nat-traversal

Save with: write mem - and your done.

Download now your username in Hong KONG to establish the connection of the VPN client and try and ping a server in-house on your side. And make sure that the MS XP firewall is disabled.

Let me know how you go and if this does not solve your problem please rate another post could seek the same solution!

Jay

Problem with "vpn sysopt connection permit.

Hi all

I would like to ask you for advice with "vpn sysopt connection permit". I have a problem with by-pass-access list (acl) in the INSIDE interface. As I understand it and I'm going to use this command, there is no need to especialy allow traffic in the access list for the INSIDE and I can control the filter-vpn traffic. But in my case it's quite the opposite, I want particularly to this INTERIOR acl traffi. When I allow this traffic inside acl L2L tunnel rises, hollow traffic flow vpn-fltr ane acl that everything is OK. But when I do not allow that this traffic is inside of the rule with Deny statement in acl INSIDE block traffic and tunnel goes ever upward. Part of the configuraciton which you can view below.

Please let me know if I'm wrong, or what I did wrong?

Thank you

Karel

PHA-FW01 # view worm | Worm Inc

Cisco Adaptive Security Appliance Software Version 4,0000 1

PHA-FW01 # display ru all sys

No timewait sysopt connection

Sysopt connection tcpmss 1380

Sysopt connection tcpmss minimum 0

Sysopt connection permit VPN

Sysopt connection VPN-reclassify

No sysopt preserve-vpn-stream connection

no RADIUS secret ignore sysopt

No inside sysopt noproxyarp

No EXT-VLAN20 sysopt noproxyarp

No EXT-WIFI-VLAN30 sysopt noproxyarp

No OUTSIDE sysopt noproxyarp

PHA-FW01 # display the id of the object-group ALGOTECH

object-group network ALGOTECH

object-network 10.10.22.0 255.255.255.0

host of the object-Network 172.16.15.11

PHA-FW01 # show running-config id of the object VLAN20

network of the VLAN20 object

subnet 10.1.2.0 255.255.255.0

L2L_to_ALGOTECH list extended access permitted ip object object-group VLAN20 ALGOTECH

extended access list ACL-ALGOTECH allow ip object-group object VLAN20 ALGOTECH

Note EXT-VLAN20 of access list =.

access list EXT-VLAN20 allowed extended ip object VLAN20 ALGOTECH #why object-group must be the rule here?

access list EXT-VLAN20 extended permitted udp object VLAN20 object-group OUT-DNS-SERVERS eq field

EXT-VLAN20 allowed extended VLAN20 object VPN-USERS ip access list

EXT-VLAN20 extended access list permit ip object VLAN20 OPENVPN-SASPO object-group

EXT-VLAN20 allowed extended object VLAN10 VLAN20 ip access list

deny access list extended VLAN20 EXT ip no matter what LOCAL NETS of object-group paper

EXT-VLAN20 allowed extended icmp access list no echo

access list EXT-VLAN20 allowed extended object-group SERVICE VLAN20 object VLAN20 everything

EXT-VLAN20 extended access list deny ip any any newspaper

extended access list ACL-ALGOTECH allow ip object-group object VLAN20 ALGOTECH

GROUP_POLICY-91 group policy. X 41. X.12 internal

GROUP_POLICY-91 group policy. X 41. X.12 attributes

value of VPN-filter ACL-ALGOTECH

Ikev1 VPN-tunnel-Protocol

tunnel-group 91.X41. X.12 type ipsec-l2l

tunnel-group 91.X41. X.12 General attributes

Group Policy - by default-GROUP_POLICY-91. X 41. X.12

tunnel-group 91.X41. X.12 ipsec-attributes

IKEv1 pre-shared-key *.

PHA-FW01 # show running-config nat

NAT (EXT-VLAN20, outdoors) static source VLAN20 VLAN20 static destination ALGOTECH ALGOTECH non-proxy-arp-search to itinerary

network of the VLAN20 object

dynamic NAT interface (EXT-VLAN20, outdoors)

group-access to the INTERIOR in the interface inside

Access-group interface VLAN20 EXT EXT-VLAN20

Hello

The command "sysopt connection permit-vpn" is the default setting and it applies only to bypass ACL interface to the interface that ends the VPN. It would be connected to the external network interface. This custom has no effect on the other interfaces ACL interface.

So if you initiate or need to open connections from your local network to remote network through the VPN L2L connection then you will need to allow this traffic on your LAN interface ACL networks.

If the situation was that only the remote end has launched connections to your network then 'sysopt permit vpn connection' would allow their connections around the external interfaces ACL. If If you have a VPN configured ACL filter, I think that the traffic will always accompany against this ACL.

Here are the ASA reference section to order custom "sysopt"

http://www.Cisco.com/en/us/docs/security/ASA/command-reference/S21.html#wp1567918

-Jouni

VPN client connection script

Is it possible to run a login script that makes things like drive mapping when a user signs in their business with the VPN client network.

You can enable the 'Auto Connect before Logon' feature in the client and you should be able to connect to the hub, connect on the NT domain and run scripts.

The VPN client connection

Is it possible to configure the VPN client to set up some sort of login and password so when you run, connects automatically without writing the user name and password.

This must be the vpn client without making any changes on the vpn server.

No idea how to do this?

Kind regards

to 4.0.2 4.6 & 4.8 Yes - in the profile .pcf file, make sure that

SaveUserPassword = 1

This will keep the user name & password in the profile, when you click on it - it should fine connection.

You must also activate the user store password: -.

In the pix / asa - under the client VPN profile:-

allow password-storage

HTH.

Limits of pix 506 for VPN client connections

Hello. My company is looking to move away from using Microsoft's RRAS to workers to remote VPN connections. We have a 506th Pix currently serving 2 site VPN connections and client connections. Nobody knows what the limit for concurrent client vpn connections on a 506e and if having 10 to 20 clients connected at the same time (on a user base of 100 +) would cause problems. Any thoughts would be greatly appreciated.

There is no license for the number of connections limit, this is more a limitation of resources. Check that the data sheet a 506E can handle 16 MB of 3DES VPN. It's marketing plug so the actual throughput will be lower.

http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps5708/ps5709/ps2030/ps4336/product_data_sheet09186a0080091b13.html

Hope that helps.

VPN client connected but no ping nor access to privat network

Hello

I have a 1802w installed, a VPN client that can connect to the router and L2L connection, which works very well.

On the router, I see that the client is connected, but no traffic passes. In sh crypto ipsec, I see that traffic is decrypted, but no packtets are encypted.

Can someone point me in the right direction? I have the confs and debugs attached. Thanks for the help in advance.

Erich

Erich,

Looking at your configuration, two things:

1 - is the current running configuration. I see your Tunnel L2L is configured with an address of correspondence of 101, but I don't see a 101 ACL set on the router.

2. your Split Tunnel must be reconfigured. Which means, the source and destination must be exchanged.

SplitList extended IP access list

permit ip 192.168.2.0 0.0.0.255 192.168.111.0 0.0.0.255

Split Tunneling

http://www.Cisco.com/en/us/Tech/tk59/technologies_configuration_example09186a00800a393b.shtml#Con4

Also, the IP address pool you assign to clients, ensure that they are not part of a LAN on your side. If so, you can then run in routing problems.

Kind regards

Arul

* Please note all useful messages *.

VPN Client connection terminated

I am new to Cisco PIX and I'm having a problem with the removal of the connections. We use a 515e on 6.2 and my laptops use VPN Client 4.0 and Radius to IAS on W2K3 Server. About 30 minutes, a window appears saying "secure VPN connection is completed by a peer. "Reason: (reason unspecified peer). I've combed through the configuration settings and the settings of the Cisco and my connection on the Radius Server and am unable to find anything to help. Any help would be appreciated.

Thank you

Warren

On if the PIX515 you do a 'show vpngroup' which is the ' time max "setting configured for? If it is not configured, you can do a max of vpngroup-time for the clients of the group. You can also set the idle max here too. In troubleshooting, maybe set to 3600 seconds (1 hour) to see if you are disconnected. Then adjust your idle down time (you can set it to 0 if ever you want clients idel time out) and see what happens.

Matt

Problem Cisco VPN Client with local authentication

I configured PIX for the Cisco VPN client for remote access. It must be connected and also inside network is accessible. It is without any authentication username. It works well with a vpngroup name and the password for the vpngroup, configured on PIX and also on the Cisco VPN client. (version 4.6)

When I configure crypto for local authentication, it did not work. configuration is as follows.

#crypto card: name of the map of local authentication client

I created a user with private = 15.

Client VPN must be connected, and then it pops up a window user name and password. After giving these details. The user is not authenticated.

Are there patterns more to do in / isakmp / ipsec / aaa configurations.

Thank you

AAA-server local LOCAL Protocol

client authentication card crypto remote_vpn LOCAL

client configuration address card crypto remote_vpn throw

client configuration address card crypto remote_vpn answer

VPN clients connecting to the site to site VPN

Hi all

I'm currently configured my firewall outside interface VPN closing the point for two clients VPN and Cisco VPN site-to-site. What I found is that when I Client VPN, I can't access the devices on the site-to-site VPN. I think that the PIX does not allow this kind of connections, because it requires routing on the same interface. Can someone point me to some docs on ORC who can help me in this situation. Thanks in advance for your help.

the restriction has been resolved with pix v7, and the related command is "permit same-security-traffic intra-interface".

http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a008046f307.shtml

DNS problems when VPN Client connection is Active

Similar Questions

Maybe you are looking for