VPN client connection script
Is it possible to run a login script that makes things like drive mapping when a user signs in their business with the VPN client network.
You can enable the 'Auto Connect before Logon' feature in the client and you should be able to connect to the hub, connect on the NT domain and run scripts.
Tags: Cisco Security
Similar Questions
-
PIX: Cisco VPN Client connects but no routing
Hello
We have a Cisco PIX 515 with software 7.1 (2). He accepts Cisco VPN Client connections with no problems, but no routing does to internal networks directly connected to the PIX. For example, my PC is affected by the IP 172.16.2.57 and then ping does not respond to internal Windows server 172.16.0.12 or trying to RDP. The most irritating thing is that these attempts are recorded in the system log, but always ended with "SYN timeout", as follows:
2009-01-06 23:23:01 Local4.Info 217.15.42.214% 302013-6-PIX: built 3315917 for incoming TCP connections (172.16.2.57/1283) outside:172.16.2.57/1283 inside: ALAI2 / 3389 (ALAI2/3389)
2009-01-06 23:23:31 Local4.Info 217.15.42.214% 302014-6-PIX: TCP connection disassembly 3315917 for outside:172.16.2.57/1283 inside: ALAI2 / 3389 duration 0:00:30 bytes 0 SYN Timeout
2009-01-06 23:23:31 Local4.Debug 217.15.42.214% 7-PIX-609002: duration of disassembly-outside local host: 172.16.2.57 0:00:30
We tried to activate and deactivate "nat-control", "permit same-security-traffic inter-interface" and "permit same-security-traffic intra-interface", but the results are the same: the VPN connection is successfully established, but remote clients cannot reach the internal servers.
I enclose the training concerned in order to understand the problem:
interface Ethernet0
Speed 100
full duplex
nameif outside
security-level 0
IP address xx.yy.zz.tt 255.255.255.240
!
interface Ethernet1
nameif inside
security-level 100
172.16.0.1 IP address 255.255.255.0
!
access extensive list ip 172.16.0.0 inside_nat0_outbound allow 255.255.255.0 172.16.2.56 255.255.255.248
!
access extensive list ip 172.16.0.0 outside_cryptomap_dyn_20 allow 255.255.255.0 172.16.2.56 255.255.255.248
!
VPN_client_group_splitTunnelAcl list standard access allowed 172.16.0.0 255.255.255.0
!
IP local pool pool_vpn_clientes 172.16.2.57 - 172.16.2.62 mask 255.255.255.248
!
NAT-control
Global xx.yy.zz.tt 12 (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 12 172.16.0.12 255.255.255.255
!
internal VPN_clientes group strategy
attributes of Group Policy VPN_clientes
xxyyzz.NET value by default-field
internal VPN_client_group group strategy
attributes of Group Policy VPN_client_group
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list VPN_client_group_splitTunnelAcl
xxyyzz.local value by default-field
!
I join all the details of the cryptographic algorithms because the VPN is successfully completed, as I said at the beginning. In addition, routing tables are irrelevant in my opinion, because the inaccessible hosts are directly connected to the internal LAN of the PIX 515.
Thank you very much.
can you confirm asa have NAT traversal allow otherwise, activate it in asa and vpn clients try again.
PIX / ASA 7.1 and earlier versions
PIX (config) #isakmp nat-traversal 20
PIX / ASA 7.2 (1) and later versions
PIX (config) #crypto isakmp nat-traversal 20
-
Linksys Cisco VPN Client connection drops
I have a Linksys BEFVP41 V2. I have a PC running Windows XP SP2 with customer VPN Cisco 5.0.00.0340. I have a problem when I log in the VPN client with my employer network. It seems to be ok. No problem to do the job, hit their proxy server, etc.. All of a sudden, the connection drops. It seems to 'freeze' the network. No surfing, without PuTTY. Sometimes 5 minutes after the connection or 3 hours later. I have to disconnect the VPN connection, and then reconnect. What could be the problem? My MTU is set to 1432. The Windows Firewall has exceptions for ports 10000, 4500 and 62515. I have a network in place at 172.20.x.x... not the default or typical 10.x.x.x network. Firmware is 1.01.04 on the router.
-
VPN Client connection - Hong Kong to the United States.
We have a PIX 515E with active VPN. In the United States, users have no problem connecting with the VPN client.
However, we have a user in Hong Kong, who has problems. It can connect to the external interface and the connection. The user is assigned an IP address from the pool of reserve, but cannot connect to our server here in the States or internal ping even one of the ip addresses.
Is there another config that needs to be done?
Yes, the do config mode:
ISAKMP nat-traversal
Save with: write mem - and your done.
Download now your username in Hong KONG to establish the connection of the VPN client and try and ping a server in-house on your side. And make sure that the MS XP firewall is disabled.
Let me know how you go and if this does not solve your problem please rate another post could seek the same solution!
Jay
-
Hi all
I am trying to connect to my Cisco AnyConnect VPN Client but everytime I try, I get an error (connection attempt failed because the network or pc problem cisco)
Can anyone help me please with this.
Thank you
Zia
What is the local firewall on your computer?
-
Is it possible to configure the VPN client to set up some sort of login and password so when you run, connects automatically without writing the user name and password.
This must be the vpn client without making any changes on the vpn server.
No idea how to do this?
Kind regards
to 4.0.2 4.6 & 4.8 Yes - in the profile .pcf file, make sure that
SaveUserPassword = 1
This will keep the user name & password in the profile, when you click on it - it should fine connection.
You must also activate the user store password: -.
In the pix / asa - under the client VPN profile:-
allow password-storage
HTH.
-
Limits of pix 506 for VPN client connections
Hello. My company is looking to move away from using Microsoft's RRAS to workers to remote VPN connections. We have a 506th Pix currently serving 2 site VPN connections and client connections. Nobody knows what the limit for concurrent client vpn connections on a 506e and if having 10 to 20 clients connected at the same time (on a user base of 100 +) would cause problems. Any thoughts would be greatly appreciated.
There is no license for the number of connections limit, this is more a limitation of resources. Check that the data sheet a 506E can handle 16 MB of 3DES VPN. It's marketing plug so the actual throughput will be lower.
Hope that helps.
-
DNS problems when VPN Client connection is Active
Using the latest version of the Cisco VPN client. Support remote clients... when I VPN on client sites I lose connectivity to my local exchange server. The DNS client appears to become primary on a VPN connection, where he bring himself to the public address of our exchange server. In the Transport settings, I have "allow LAN access. Any help would be appreciated. Thank you.
Whether or not the local lan access is allowed is a setting on the device remote, not only to your customer. To see if you get local lan access, look under the tab Details of statistics and the road.
-
VPN client connected but no ping nor access to privat network
Hello
I have a 1802w installed, a VPN client that can connect to the router and L2L connection, which works very well.
On the router, I see that the client is connected, but no traffic passes. In sh crypto ipsec, I see that traffic is decrypted, but no packtets are encypted.
Can someone point me in the right direction? I have the confs and debugs attached. Thanks for the help in advance.
Erich
Erich,
Looking at your configuration, two things:
1 - is the current running configuration. I see your Tunnel L2L is configured with an address of correspondence of 101, but I don't see a 101 ACL set on the router.
2. your Split Tunnel must be reconfigured. Which means, the source and destination must be exchanged.
SplitList extended IP access list
permit ip 192.168.2.0 0.0.0.255 192.168.111.0 0.0.0.255
Split Tunneling
http://www.Cisco.com/en/us/Tech/tk59/technologies_configuration_example09186a00800a393b.shtml#Con4
Also, the IP address pool you assign to clients, ensure that they are not part of a LAN on your side. If so, you can then run in routing problems.
Kind regards
Arul
* Please note all useful messages *.
-
I have problems to access the resources within the network when connecting with the Cisco VPN client for a version of 8.4 (3) operation of the IOS Cisco ASA 5510. I tried all new NAT 8.4 orders but cannot access the network interior. I can see traffic in newspapers when ping. I can only assume I have NAT evil or it's because the inside interface of the ASA is on the 24th of the same subnet as the network interior? Please see config below, any suggestion would be appreciated. I configured a VPN site to another in this same 5510 and it works well
Thank you
interface Ethernet0/0
Speed 100
full duplex
nameif outside
security-level 0
IP x.x.x.x 255.255.255.240
!
interface Ethernet0/1
Speed 100
full duplex
nameif inside
security-level 100
IP 10.88.10.254 255.255.255.0
!
interface Management0/0
Shutdown
nameif management
security-level 0
no ip address
!
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network of the PAT_to_Outside_ClassA object
10.88.0.0 subnet 255.255.0.0
network of the PAT_to_Outside_ClassB object
subnet 172.16.0.0 255.240.0.0
network of the PAT_to_Outside_ClassC object
Subnet 192.168.0.0 255.255.240.0
network of the LocalNetwork object
10.88.0.0 subnet 255.255.0.0
network of the RemoteNetwork1 object
Subnet 192.168.0.0 255.255.0.0
network of the RemoteNetwork2 object
172.16.10.0 subnet 255.255.255.0
network of the RemoteNetwork3 object
10.86.0.0 subnet 255.255.0.0
network of the RemoteNetwork4 object
10.250.1.0 subnet 255.255.255.0
network of the NatExempt object
10.88.10.0 subnet 255.255.255.0
the Site_to_SiteVPN1 object-group network
object-network 192.168.4.0 255.255.254.0
object-network 172.16.10.0 255.255.255.0
object-network 10.0.0.0 255.0.0.0
outside_access_in deny ip extended access list a whole
inside_access_in of access allowed any ip an extended list
11 extended access-list allow ip 10.250.1.0 255.255.255.0 any
outside_1_cryptomap to access extended list ip 10.88.0.0 255.255.0.0 allow object-group Site_to_SiteVPN1
mask 10.250.1.1 - 10.250.1.254 255.255.255.0 IP local pool Admin_Pool
NAT static NatExempt NatExempt of the source (indoor, outdoor)
NAT (inside, outside) static source any any static destination RemoteNetwork4 RemoteNetwork4-route search
NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork1 RemoteNetwork1
NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork2 RemoteNetwork2
NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork3 RemoteNetwork3
NAT (inside, outside) static source LocalNetwork LocalNetwork static destination RemoteNetwork4 RemoteNetwork4-route search
!
network of the PAT_to_Outside_ClassA object
NAT dynamic interface (indoor, outdoor)
network of the PAT_to_Outside_ClassB object
NAT dynamic interface (indoor, outdoor)
network of the PAT_to_Outside_ClassC object
NAT dynamic interface (indoor, outdoor)
Access-group outside_access_in in interface outside
inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
dynamic-access-policy-registration DfltAccessPolicy
Sysopt connection timewait
Service resetoutside
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-ikev1 esp-md5-hmac bh-series
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto-map dynamic dynmap 10 set pfs
Crypto-map dynamic dynmap 10 set transform-set bh - set ikev1
life together - the association of security crypto dynamic-map dynmap 10 28800 seconds
Crypto-map dynamic dynmap 10 kilobytes of life together - the association of safety 4608000
Crypto-map dynamic dynmap 10 the value reverse-road
card crypto mymap 1 match address outside_1_cryptomap
card crypto mymap 1 set counterpart x.x.x.x
card crypto mymap 1 set transform-set ESP-AES-256-SHA ikev1
card crypto mymap 86400 seconds, 1 lifetime of security association set
map mymap 1 set security-association life crypto kilobytes 4608000
map mymap 100-isakmp ipsec crypto dynamic dynmap
mymap outside crypto map interface
crypto isakmp identity address
Crypto isakmp nat-traversal 30
Crypto ikev1 allow outside
IKEv1 crypto ipsec-over-tcp port 10000
IKEv1 crypto policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 1
life 86400
IKEv1 crypto policy 50
preshared authentication
the Encryption
md5 hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
preshared authentication
aes-256 encryption
sha hash
Group 1
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
Telnet timeout 5
Console timeout 0
management-access inside
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal BACKDOORVPN group policy
BACKDOORVPN group policy attributes
value of VPN-filter 11
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelall
BH.UK value by default-field
type tunnel-group BACKDOORVPN remote access
attributes global-tunnel-group BACKDOORVPN
address pool Admin_Pool
Group Policy - by default-BACKDOORVPN
IPSec-attributes tunnel-group BACKDOORVPN
IKEv1 pre-shared-key *.
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
Excellent.
Evaluate the useful ticket.
Thank you
Rizwan James
-
VPN Client connection terminated
I am new to Cisco PIX and I'm having a problem with the removal of the connections. We use a 515e on 6.2 and my laptops use VPN Client 4.0 and Radius to IAS on W2K3 Server. About 30 minutes, a window appears saying "secure VPN connection is completed by a peer. "Reason: (reason unspecified peer). I've combed through the configuration settings and the settings of the Cisco and my connection on the Radius Server and am unable to find anything to help. Any help would be appreciated.
Thank you
Warren
On if the PIX515 you do a 'show vpngroup' which is the ' time max "setting configured for? If it is not configured, you can do a max of vpngroup-time for the clients of the group. You can also set the idle max here too. In troubleshooting, maybe set to 3600 seconds (1 hour) to see if you are disconnected. Then adjust your idle down time (you can set it to 0 if ever you want clients idel time out) and see what happens.
Matt
-
Problem with VPN client connecting the PIX of IPSec.
PIX # 17 Sep 14:58:51 [IKEv1 DEBUG]: IP = Y, IKE Peer included IKE fragmentation capability flags: Main Mode: real aggressive Mode: false
Sep 17 14:58:51 [IKEv1]: IP = Y, landed on tunnel_group connection
Sep 17 14:58:51 [IKEv1 DEBUG]: Group = X, IP = Y, IKE SA proposal # 1, transform # 13 entry overall IKE acceptable matches # 1
Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, the authenticated user (X).
Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, mode of transaction attribute not supported received: 5
Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, Y = IP, Type of customer: Client Windows NT Version of the Application: 5.0.06.0160
Sep 17 14:58:58 [IKEv1]: Group = Xe, Username = X, IP = Y, assigned private IP 10.0.1.7 remote user address
Sep 17 14:58:58 [IKEv1 DEBUG]: Group = X, Username = X, IP = Y, fast Mode resumed treatment, Cert/Trans Exch/RM IDDM
Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, PHASE 1 COMPLETED
Sep 17 14:58:58 [IKEv1]: IP = Y, Keep-alive type for this connection: DPD
Sep 17 14:58:58 [IKEv1 DEBUG]: Group = X, Username = X, Y = IP, timer to generate a new key to start P1: 6840 seconds.
Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, Y = IP, data received in payload ID remote Proxy Host: address 10.0.1.7, protocol 0, Port 0
Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, received data IP Proxy local subnet in payload ID: address 0.0.0.0 Mask 0.0.0.0, protocol 0, Port 0
Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, his old QM IsRekeyed not found addr
Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, Y = IP, remote peer IKE configured crypto card: outside_dyn_map
Sep 17 14:58:58 [IKEv1 DEBUG]: Group = X, Username = X, Y = IP, IPSec processing SA payload
Sep 17 14:58:58 [IKEv1 DEBUG]: Group = X, Username = X, Y = IP, IPSec SA proposal # 14, turn # 1 entry overall SA IPSec acceptable matches # 20
Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, IKE: asking SPI!
Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, Y = IP, IPSec initiator of the substitution of regeneration of the key duration to 2147483 to 7200 seconds
Sep 17 14:58:58 [IKEv1 DEBUG]: Group = X, Username = X, IP = Y, passing the Id of the Proxy:
Remote host: 10.0.1.7 Protocol Port 0 0
Local subnet: 0.0.0.0 mask 0.0.0.0 Protocol Port 0 0
Sep 17 14:58:58 [IKEv1 DEBUG]: Group = X, Username = X, IP = notification sending answering MACHINE service LIFE of the initiator
Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, the security negotiation is complete for the user (slalanne) answering machine, Inbound SPI = 0 x 6
044adb5, outbound SPI = 0xcd82f95e
Sep 17 14:58:58 [IKEv1 DEBUG]: Group = X, Username = X, Y = IP, timer to generate a new key to start P2: 6840 seconds.
Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, adding static route to the customer's address: 10.0.1.7
Sep 17 14:58:58 [IKEv1]: Group = X, Username = X, IP = Y, PHASE 2 COMPLETED (msgid = c4d80320)
PIX # 17 Sep 14:59:40 [IKEv1]: Group = X, Username = X, Y = IP, Connection over for homologous X. Reason: Peer terminate remote Proxy 10.0.1.7, 0.0.0.0Sep Proxy Local 17 14:59:40 [IKEv1 DEBUG]: Group = X, Username = X, IP = Y, IKE removing SA: 10.0.1.7 Remote Proxy, Proxy Local 0.0.0.0
Sep 17 14:59:40 [IKEv1]: IP = Y, encrypted packet received with any HIS correspondent, drop
Then debugging IPSec are also normal.
Now this user is a disconnect and other clients to connect normally. the former user is trying to connect to the site and here is the difference in debugging:
Sep 17 14:25:22 [IKEv1]: Group = X, Username = X, Y = IP, tunnel IPSec rejecting: no entry card crypto for remote proxy proxy 10.0.1.8/255.255.255.255/0/0 local 0.0.0.0/0.0.0.0/0/0 on the interface outside
Sep 17 14:25:22 [IKEv1]: Group = X, Username = X, IP = Y, error QM WSF (P2 struct & 0x2a5fd68, mess id 0x16b59315).
Sep 17 14:25:22 [IKEv1 DEBUG]: Group = X, Username = X, IP = O, case of mistaken IKE responder QM WSF (struct & 0x2a5fd68), :
QM_DONE, EV_ERROR--> QM_BLD_MSG2, EV_NEGO_SA--> QM_BLD_MSG2, EV_IS_REKEY--> QM_BL
D_MSG2, EV_CONFIRM_SA--> QM_BLD_MSG2, EV_PROC_MSG--> QM_BLD_MSG2, EV_HASH_OK--> QM_
BLD_MSG2, NullEvent--> QM_BLD_MSG2, EV_COMP_HASH
Sep 17 14:25:22 [IKEv1]: Group = X, Username = X, IP = Y, peer table correlator withdrawal failed, no match!
Sep 17 14:25:22 [IKEv1]: IP = Y, encrypted packet received with any HIS correspondent, dropHere is the config VPN... and I don't see what the problem is:
Dynamic crypto map outside_dyn_map 20 match address outside_cryptomap_dyn_20
Crypto-map dynamic outside_dyn_map 20 the transform-set ESP-DES-MD5 value
life together - the association of security crypto dynamic-map outside_dyn_map 20 seconds 7200
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
ISAKMP crypto identity hostname
crypto ISAKMP allow outside
crypto ISAKMP policy 20
preshared authentication
the Encryption
md5 hash
Group 2
life 7200
crypto ISAKMP policy 65535
preshared authentication
the Encryption
sha hash
Group 2
life 86400outside_cryptomap_dyn_20 list of allowed ip extended access any 10.0.1.0 255.255.255.248
attributes global-tunnel-group DefaultRAGroup
authentication-server-group (outside LOCAL)
Type-X group tunnel ipsec-ra
tunnel-group X general attributes
address pool addresses
authentication-server-group (outside LOCAL)
Group Policy - by default-X
tunnel-group X ipsec-attributes
pre-shared-key *.
context of prompt hostnamemask of 10.0.1.6 - 10.0.1.40 IP local pool 255.255.255.0
Please remove the acl of the dynamic encryption card crypto, it causes odd behavior
try to use split instead of the acl acl in dynamic crypto map, and let me know how it goes
-
VPN clients connecting to the site to site VPN
Hi all
I'm currently configured my firewall outside interface VPN closing the point for two clients VPN and Cisco VPN site-to-site. What I found is that when I Client VPN, I can't access the devices on the site-to-site VPN. I think that the PIX does not allow this kind of connections, because it requires routing on the same interface. Can someone point me to some docs on ORC who can help me in this situation. Thanks in advance for your help.
the restriction has been resolved with pix v7, and the related command is "permit same-security-traffic intra-interface".
-
VPN Client - connection made but not able to access resources
Hello
I have two sites, A Site with a 5510 firewall and Site B with a user with a basic internet connection.
I need the user to be able to access the PC and the servers here.
I created a so called remote access VPN and the user can connect to this Site b.
They get an ip and dns address but no default gateway.
I am unable to what whether on the network 10.255.0.0/16 ping or access any servers.
I'll post the config and maybe someone could show me what I'm missing!
Thanks in advance
I wouldn't recommend configure the ip pool in the same subnet as your internal network. Please configure a subnet pool a different ip address.
However, with the current setup, you're absent NAT exemption for these subnets:
allow inside_nat0_outbound to access extended list ip 10.255.0.0 255.255.0.0 10.255.11.0 255.255.255.0
Hope that helps.
-
Cisco VPN Client connected, but no secure way.
Hello
I can connect to a VPN server smoothly, but once connected, I'm not able to reach all local resources. When I looked at the stats of customer VPN, it shows only a single route in 'Details of the route--> secure routes', 1.1.1.1 255.255.255.255. This is the reason why I can't access any resource. This could be the cause of this problem? How can I secure roads announcing cisco customer? I don't have access to the server, but I will ask the person who can make changes.
Thank you.
Kind regards
Shivani
Shivani,
Split tunneling is what you're looking for, it will affect your secure routes.
Marcin
Maybe you are looking for
-
HHas someone at - he never had their iPhone ask you to change your password?
-
FF 4.0. Flash menus such as a key is maintain pressed making it inaccessible. The problem persists with all the plugin disabled. Firefox box top left appears. The old logo FF show instead.
-
System satellite M50 Windows noisy and distorted noise
Hello users. The years of use of laptop Toshiba, it's the first time, none of them developed a fault, from one day to the next: after hibernation, my windows sound system became noisy and distorted. Interestingly, other sounds that work very well (li
-
% <; Double >; erratic battery charging
Hello Recently, I noticed a few questions while ac load my motox 2ndgen. Two days ago the battery stopped load from 86 percent. Turn off cable inserted ordnance from 86 to 100% with the ca. Today a similar thing happened where it stopped loading at 9
-
Not printing and no to cancel a pdf file
Hi, I have a photosmart b109n connected by a usb port on my Win 7 Asus netbook. A few days ago, I tried to print a very simple PDF, unfortunately the doesen't print job and it was impossible to erase it (i've fisically unplugged the printer for a whi