How to connect my Satellite L300 to TV?

Similar Questions

• How to connect by Satellite L300-1 has 3 on TV?

  I have laptop Satellite L300-1 has 3, and I can not show pc image to screen LCD TV Philips 5603d.
  I tried with the vga (pc) in RGB (TV) cable and with connector vga, DVI and DVI to HDMI on the side of TV, but nothing happened. Is it possible to see the image on the TV?
  I need software for that, or I did something wrong?

  Thank you!

  Hello

  All LCD televisions have several video - in different ports and what you should try is to use the VGA-to-RCA cable.
  Your TV must have port cinch. Connect your laptop to the TV, turn on RCA TV port and then use FN + F5 key combination to switch the LCD TV.

  Please let me know if this work.

• How to connect by Satellite L300 laptop to a LCD TV

  I'm trying to connect my laptop L300 satellite to monitor LCD tv via the VGA port. I have trouble getting the entire desktop on the TV. The left side of the screen is not visibe and there is a black band on the right side of the screen. I have vista home premium edition installed and I'm using resolution 1360 x 768. Could someone please help me solve this.

  My portable computer satellite L500D connects very well with the TV using xactly same settings.

  Thank you

  Hello

  Please check in the settings of your graphics card, if the option: full screen (no border) was chosen.
  This can be found in Aspect Ration Options.
  I have a U400 with Intel graphics chip and this is available here.

  In addition, some laptops support an additional option of BIOS where the screen can be set to mode full screen (without borders)

• How to connect by Satellite L300-110 to the TV?

  I'm sorry. Help me

  I have the Satellite L300 110.
  I want to connect to the TV.

  Is this possible?
  What should I do?

  Hello

  As much as I know the laptop supports only port external monitor (RGB port)

  You may be able to connect laptop external monitor using a VGA cable but no TV.

  There is no available port TV out then I guess you won't be able to connect this unit to the TV

  Good bye

• How to connect by Satellite L300 to mobile phone SGH-E250?

  I can't install my phone Samsung SGH-E250 to my Satellite L300, running Windows Vista Home Edition.

  Help, please?

  What do you intend to do – to use the sync software that came with the mobile phone?
  If so, simply configure a port COM with "Bluetooth settings" and select later in the synchronization settings of the
  phone sync software.

• Cannot connect by Satellite L300-1BW to wireless technology

  My Satellite L300-1BW has recently ceased to connect the my Wi - Fi.

  It shows that wireless networks are available, I can see my secure network and there is no red cross through the icon but when I click on IE, it only says: unable to connect.

  I tried with 2 of my friends houses on their connections without wire (previously connected) and it just does the same thing.
  I can see all the networks concerned, but it won't take me actually to my homepage.

  I do not understand why it has just stopped working - drives my lan are up-to-date. Help..!

  Hello

  You can see the WLan, which means that the WiFi is enabled correctly.
  But have you used the good encryption and encryption password in order to connect to the WLan router?

  Please check this!

  Please also check the firewall settings!

• How to connect by Satellite M30 on TV?

  Hello
  Could someone advise me please how to connect my Toshiba laptop (Satellite M30-304) to a TV?

  Y at - it a specific cable I need to use? Please let me know the details and the brand.

  Thank you
  Knockaert

  Hello

  As far as I know this laptop has a s-video port on the left side of the laptop.
  In this case, you need a cable that supports this port. Also after you connect the laptop to TV, you will need to switch to the television set with the FN + F5 key combination.
  In addition, you will need to choose the right channel of the TV.
  Have you checked the user manual? You will find a complete description.

  Good bye

• How to connect a satellite with Qosmio G30-188 receiver?

  Hello!

  How can I connect a satellite receiver to my Qosmio g30-188? I need to connect the AV signal (SCART) on the receiver to the laptop.
  can someone help me?

  Thanks in advance!

  Hello

  I didn't test it with cable SCART, but I presume that you need adapter SCART to connect to your satellite receiver. Here is the image what it looks like.

  On this map, you can connect S-video cable to transfer the picture to your Qosmio. You will find on the right side for laptop S-video PORT. For sound, you can use the audio cable (red/white) with proper adapter

  As I said I n t test it until now. In any case please check manuals s user document. Maybe, you can find some useful information.

• How to connect the Satellite Pro P100 to Hifi

  I've got Satellite Pro P100. How to connect this laptop to stereo
  It's probably easy, but what I can say... Call me stupid.

  I have head that comes out of the headphone jack, it connects to my friendly hifi.
  Ill be there is a unpleasant hissing in the background. Trying to hook up my boys in head mp3 player, and that works very well.

  Any chance of some help... Thank you

  Hello

  To my knowledge, you can connect the satellite Pro P100 to HiFi only via a cable 2 RCA Audio Y adapter. To my knowledge the laptop doesn't support the S/PDIF audio output so you only to use an analog audio port.

  You can also buy a stereo adapter with 2 x cinch sockets to connect the laptop to the stereo. This card can be plugged into the headset jack

  Check this box:
  Stereo adapter

  I think you should visit the nearest dealer of portable. It can show you the right and taken in charge of cables and adapters.

• How to connect by Satellite Pro A300-1LW to TV - only monitors VGA port available

  I want to connect my Satellite Pro A300 1LW to the TV to watch DVDs and videos on the internet.
  There is only a single VGA output.

  I have this connected to the input VGA on TV (Sony Bravia LCD TV) and it displays the start-up screens such as the BIOS, Windows startup screen password but fails when the user login screen.

  The television then shows a message indicating "signal not supported.
  Adjust the PC output '.

  Is the complete list of available interfaces:

  1 x DC-in
  1 x external monitor (this is the port that I use)
  1 x RJ-11
  1 x RJ-45
  1 x i.Link (IEEE 1394)®
  1 x external microphone
  1 headphone (stereo)
  1 x SP/DIF (optical) shared with headphone jack
  1 x 5-in-1 Bridge Media slot (supports SD ^ TM ^ memory cards up to 16 GB)
  Stick® up to 256 MB, Memory Stick Pro ^ TM ^ up to 2 GB, MultiMedia Card ^ TM ^ to the top
  to 2 GB and xD-Picture Card ^ TM ^ up to 2 GB)
  1 (shared with a USB port) x eSATA
  4 (2 left, 2 right) x USB 2.0 (USB Sleep-and-Charge of support)

  Have you tested when laptop is not connected and that Vista is fully charged?
  I mean start your laptop and wait for Vista to be fully charged. Cannot connect to the TV, then use the FN + F5 key combination to have the image on the TV.

  It works correctly?

• How to restore the Satellite L300 PSLB8E to factory settings?

  I have problems with repeated "crash" of my system.
  I get the dreaded blue page, which then restarts (usually) pretty quickly.

  I think trying the option 'Restore factory settings', but I've never done this before.
  If I do, which will leave it on my computer?

  I have my own disks which I was invited to do the last few months (I just got this machine since May this year) will be I need it, or is there something else that is needed?

  I have a Satellite L300, PSLB8E, using Vista Home Basic

  Hello

  Hmm. I m wondering if you checked a few discussions here on the same theme.
  Did you?
  There are more that enough son and I m sure you will not need to create this thread after reading some reviews.

  Just a tip; the use of HARD drive recovery option will format the system partition, but the D partition (where the HARD drive recovery files are placed) wouldn't be formatted!

  If you are still not sure after reading some discussions, please ask again ;)

• How to connect my Satellite A200 with LCS Philips TV?

  Hi, I have problems to connect my Satellite A200 1E1 with a PF9967D 32 Philips TV LCD HD ready.
  Manuals recommend an HDMI extension that is unfortunately not available with my laptop.

  However, is possible to use an S-Video connection instead? I could accept a lower quality. When I connect the laptop with the TV, I feel that the Satellite doesn't send out any signal. The combination "FN + F5" does not have the ability to switch between screens. Once, I connected a projector and had no problem at all with switching between the video-projector, computer screen or both.

  Any comments would be much appreciated, thank you in advance.

  Hello

  In the user manuals, it is written in almost each of the chapters on ports or machines slot a short comment: depending on the configuration. This means that this s manuals can be used for different laptop A200 models.

  Each laptop comes with optical disc drive HD-DVD also has an HDMI port. According to the specifications of the laptop, your laptop has no ODD of HD - DVD, and because of this, there is also no HDMI port.

  There sonly a S-video to TV-out port. Using this port you can send the video signal to your TV. I have too many LCD TV and I have used it several times with my laptop A200. It's very simple, but make sure you use the right channel (S-Video) on your TV. Using the FN + F5 key combination, you can switch to the TV.

  If this does not work you are doing something wrong.

• How to connect by Satellite P300D to LCD TV

  Hello

  I'm new to the forum and hope I'm in the right place.

  I was tearing my hair out trying to connect my Satellite P300D to my LCD TV.
  All connections seem ok and the wallpaper appears on the TV but nothng else

  No slider, icons or anything else from my screen.
  When I click on identify a 2 is displayed on the TV to show he is recognized, but I can't go any further.

  Someone at - it ideas?
  Thank you

  > All connections seem ok and the wallpaper appears on the tv but nothng else,.
  For me, it looks like you have extended the Bureau for the second monitor.
  This means that all the icons will remain on the primary monitor (laptop screen) and you get another screen extended desktop.

  Click view properties, mark the second screen (external monitor) and disable the option; extend my Windows desktop to this monitor.

  Usually, you use only FN + F5 to switch to external monitor

• How to connect by Satellite A100 wireless

  im a beginner here... can someone tell me in simple terms how to connect wireless... my knowledge is limited so be nice thanks a lot

  First of all; are you sure that your laptop supports an internal Wlan card?
  On the other hand; simply activate the WLan switch on the side of books, then use the FN + F8 key combination to select the WiFi network.
  Configure the WLan settings either in windows help or 3 rd party software as Intel ProSet or Atheros WLan Client utility.

  For more information look in the forum ;) there's enough discussion on this topic

• How to connect by Satellite M105-S3084 on TV?

  I have a Satellite M105-S3084 equipped of XP SP-2. How can I connect to a TV so that the image appears on the TV? I looked at the manual and it doesn't have a description of the ports on the back and sides of the laptop, or it identifies not what kind of cable I need.

  In addition, special precautions or settings I have to do? I used it with a digital projector, but it was a different cable installation.

  It is placed on the left side S-video port. Use an S-Video cable and connect it to your TV. Please note that this will transfer the video signal only. For sound, you must use headphone output port.

  I put t know not in what country you live but make sure laptop and TV have the same setting (PAL or NTSC). Also, be sure that the S-video TV port is successfully activated.