Similar Questions

• Error: "DNS server not found" when you try to access the internet.

  original title: network WIFI DNS connection issues

  Hi all

  This is my weirdest experience with WIFI connections so far. So let me explain.
  I have several WIFI connection to my modem/router that work very well, 2 phones and 2 laptops work just great, wirelessly.
  Now I have this new ASUS wireless adapter to my PC and it gives me a headache, and the ASUS support... Well, what kind of support?
  When I turn on my pc, my pc connects to the router with full connection bars. But there is no internet, I'm getting DNS SERVER NOT FOUND, this happens every time when starting of the pc. But when my pc has already started and then I reset the router, I get internet with good working DNS and then everything works. But of course, when then restart my pc again, it loses DNS and I can restart the router once more...
  I have tried everything I know, manual setting of DNS does not work, renewing the ip and dns cmd of hot flashes do not work either.
  My setup
  ------
  Windows 7 Professional x 64
  ASUS PCE - N15 11n Wireless card
  DHCP enabled
  Dns and ip automatic (ip4/ip6) parameters
  ------
  I really hope that you guys can help me, it drives me crazy and the problem continues to exist for a month now.

  Hello Serellyn,

  Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection:

  Take a look at step 6 in this article. He further explains this problem as possible:

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx

  If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.

• Why does Firefox Mac returns 'Server not found' for a website but Safari on Mac same load site without any problems?

  The financial company Web site www.gmo.com will not appear in Firefox 32.0.02. Server not found is the only result. Safari loads Web site without any problem and Firefox for Windows computer in the House support the site without problem. All the other sites I have access, including banks, Amazon, etc. loads normally.

  What/why the Mac of Firefox version would not be able to to connect/load this site?

  The company of people told me that no one else has reported this problem and other people in my company can access the site. And they cannot reproduce the problem.

  My ISP provider could not see anything from their point of view. And access all computers to the modem/router in the House everything without any problems.

  Anyone have any ideas on what would cause this or how to go about troubleshooting?

  Thank you for your time.

  Looks like it's something on the computer. There are cookies that must be removed individually from the Firefox profile.

  To do this, go to the Firefox Menu, tap Preferences, then tap privacy and then delete cookies or cookies see the. You can search the sites that gives you problems and remove them. Restart Firefox.

  It could also be that you add a DNS server for your connection. 8.8.8.8 is google, but I don't know if this would affect given that the server is not found, not that there is no link, that's why it does not sound like a connection problem, but a cache problem. Use the Profile Manager to create and delete profiles Firefox

• DNS server not responding not although vpn works.

  Hi, I am on Windows 7 and when I access my vpn, it can only access the sites it supports.  I can access is no longer at all sites and he said: no internet connection and DNS server does not respond.  What can I do?  Please, any suggestions?  Thank you!

  Hi ERamos64,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope this helps.

• DNS server not found

  Recently, I designed a new website with Muse and hosted with Business Catalyst. I redirected the names of servers and the site has been downloaded fine.
  

  Now, 2 days later I get this message at the beginning when you try to access the site from any browser.

  This site is not reachable

  www.filledbooks.com address DNS server was not found.

  • Google search for filledbooks

  ERR_NAME_NOT_RESOLVED

  A few hours later the site loaded correctly.

  A few hours after that. I get the message again.

  Is there a problem with the servers of BC?
  How can I fix?

  B Henson wrote:

  Thanks for trying to help. This domain name has been redirected to another site, until I decided to create a separate site. All wisdom, that you can offer is appreciated.

  Thank you.

  Log o area this other site administration and search for the name of the host server... There are usually two, a main and a backup... you need these two addresses so that you can regain control.

  If you do not find this post then the current welcome here or let fall bc help email

• Satellite keyboard is not working and flashes the command prompts

  Hello world. I hope someone can help... my laptop has suddenly decided to some how turn off the keyboard. No key does not work. The touchpad mouse seems to work very well. Started once w7, a lot of windows boxes flickers between them. Command prompts to do the same thing and I cannot click on any admin agrees with the cursor ect.

  He will not simply accept. I tried the system restore ect but cannot place orders, when similar probs in Device Manager. For example, the cursor jumps oddly at the bottom of any list that I pull up and I can't ride him. The same things happen with another hard drive in the laptop. I scanned with several brands of security too... clear at all. IM wondering if its hardware, not software.

  I even re formatted the hard drive of w7 since another laptop and started again but still the same thing. I have also attached another keyboard to the live system with the same problem. USB keyboards work but still control problems. USB mouse even.

  Thanx

  I understand your question, the internal keyboard does not work, but you can use the external USB keyboard properly... don't you?

  Well, in this case, the question is clear to me: the problem is caused by the fault of the internal keyboard.
  From my point of view of the few he has no alternative option but in order to replace the internal keyboard.

• How can I run CHKDSK /F on a blue screen on Windows XP? I can not at all to a command prompt.

  I accidentally shut down my computer for an update.  Now I can only get a blue screen with a message saying that a problem has been detected and I need to disable or uninstall any anti-virus, backup utilities or disk defragmentation.  He told me to check my hard drive configuration and to search for updated drivers.  Then it is said to run CHKDSK /F to check for hard drive corruption.  The technical information is: 0 x 00000024 (0 x 00190203, 0x8638c6c8, 0xc0000102, 0x00000000).  I can't run Windows in safe mode, I can't seem to run in its final configuration, nor can I get it to go to a command prompt - it just goes back to the blue screen.  I also tried to put in my XP disc that came with the computer, and it helps not at all either.

  Unfortunately, the Microsoft Answers forum still does not prompt for any kind of information system when a new question is asked, so we don't know anything about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  I think I'm about to lose hope on this fantastic.

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Error "the device is not ready" to the Windows command prompt when you access a key USB from VMware

  The host and guest are running Win 7.  Version of VMware is 11.1.3.

  The guest computer, Windows Explorer displays the USB and I can open its files, etc.

  However, when I use the Windows command prompt to access the USB of the client, I get error "the device is not ready".

  In order to get the guest system memory image, the application must be run from the USB as an administrator.

  Help, please!  Thank you!!

  I already found the answer.  Win 7 had not installed USB 3.0 controllers.  I downloaded several executables from Intel and Lenovo sites, but they does not work because the system only has not meet the specifications, etc..  Then I discovered that a USB 2.0 stick had any problems.  So, I use 2.0 for this virtual machine.  Thank you!

• UNC paths does not work in Windows 7 command prompt of the Samba server to a Linux server

  The following command works fine in Windows XP, Windows 2003, etc., but does not work in Windows 7:

  dir \\myhist\myshare

  In Windows 7, it fails with "the system cannot find the file specified."

  Is this a bug or is it a 'work-around '?

  Windows 7 has a different layout of Windows Explorer, then Windows XP and Windows 2003...

  1. go to Windows Explorer and look for the folder

  2. at the top, copy the path, and then try again.

  --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• Download "server not found" for a website, work on other computers

  This is a secure site for which I have an account to do business. Get the same results in the Explorer, and then on my windows smartphone. Checked and it is not a site dedicated to security options.

  With the capitalized Login, use this link:

  • http://www.primericaonline.com/login

• Server not found for update of Firefox.

  When you try to download an update to Firefox version, the server is not found message came.

  Hi dblmerrill.

  I would recommend to get the latest version of Firefox by clicking on this link:

  http://www.Mozilla.org/en-us/Firefox/new/

  I hope that helps!

• NO_SCREEN does not work for the CMD command

  Hi all

  I use this: CLIENT_HOST ('cmd / it |: OVERALL.) FILE_NAME);

  for the opening of the types of different example jpg, word, pdf files, etc.

  The problem is before opening the file black CMD screen also that remains until I close the file.

  I tried CLIENT_HOST ('cmd / it |: OVERALL.) FILE_NAME, NO_SCREEN); but no fruit.

  What should I do to make this black cmd screen doesn't have to be visible?

  Kind regards

  Misbah.

  Change your code to something more like this:

  Declare
   my_cmd varchar2(512);
   OS   varchar2(20);
  Begin
  
   OS := webutil_clientinfo.get_operating_system;
  If lower(OS) LIKE ('windows%') then  
  
  -- Quotes around the path and filename may be necessary if the path or name includes spaces
   my_cmd := 'rundll32 shell32,ShellExec_RunDLL '|| :GLOBAL.FILE_NAME;
   CLIENT_HOST(my_cmd);
  
  Elsif lower(OS) LIKE ('mac%')then
   -- Do something for MAC here
   null;
  
  Else
    -- Assume this is a Unix platform
    -- Do something for Unix here.
    -- This can be broken down further to each Unix type (e.g. Linux, Solaris, etc)
    null;
  
  End if;
  End;
  

• Unable to connect to a network error: DNS server does not

  * Original title: unable to connect to the internet - yellow on network acess exclamation point

  other computers, my ipad and phone can all access the internet via the same wifi connection.

  even a direct lan connection did not help

  shows of troubleshooting DNS server does not

  Help, please

  concerning

  Turkish Lira

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, I understand that you can not connect to the network on your computer.

  I can understand how frustrating it can be when things do not work as expected.

  To better understand this issue, I would like to know the following information:

  1. What is the brand and model of the computer?

  2. did you of recent changes to the computer before this problem?

  3. you receive an error during the network connection code failed?

  DNS (Domain Name System) translates the URL in IP (Internet Protocol) addresses (and vice versa). For example, if you type http://www.microsoft.com into the address bar in your web browser, your computer sends a request to a DNS server. The DNS server translates the URL to an IP address so that your computer can find the Microsoft web server.

  We will try the following methods and check if it helps.

  Method 1: I suggest you clear the DNS cache and see if that fixes the problem. Clear the DNS cache forces DNS to query a DNS server rather than using the information stored in the cache.

  Follow these steps:

  a. click on the 'Start' button.

  b b.. in the search box, type "command prompt"

  c. in the list of results, click on invite and then click on run as administrator

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. at the command prompt, type ipconfig/flushdns

  Restart the computer and see if that fixes the problem.

  Method 2: If you still have questions, I suggest you refer to the suggestions of Meghmala responded on 28 June 2011 from the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/DNS-server-not-responding-keeps-coming-up-and-i/58fc8366-B2B2-4A8D-9E30-56a155635631?rtAction=1422395012673

  You can also see the following article for more information:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Hope this information helps, please respond with the requested information and the status of the question to get help. We will be happy to help you.

  
  

• "No access to the network" problem in Windows 7 and error message "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."

  Hello, I have a desktop PC and a laptop (DELL Inspiron N-4050).
  I have problem with my internet connection cable which is working fine on my PC, but does not not on my laptop giving an error "no access to the network.

  When I troubleshoot it says "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."
  I said to many technicians of microsoft online response, but they could not solve my problem and said this is my DNS problem and advised me to contact my Internet service provider. Guess it's because of my internet so why it works on my PC not on laptop?

  Yesterday, my ethernet cable pulled out my cell phone and I couldn't connect to the internet more. But on my desktop PC, it works perfectly fine. (I do not use wifi, if this information is also required) I have studied several threads with similar situations, and I have tried different methods to solve the problem to no avail. I did a system restore, but I'm having no luck. Also, I did not of the latest changes with my anti virus software and my LAN card drivers look to date.

  When I remove my cable from the laptop and again connect my cable then it works but only after the PC sat for awhile.
  1.I did flush DNS by typing "ipconfig/flushdns" in the command prompt.
  2. my IP address, DNS, subnet mask etc are set to automatic.
  3.I also added physical address taken from command line giving "ipconfig/all". for the properties of the network driver settings.
  4.I ' installed the drivers to date of 2014 on my laptop.
  5.I did a lot of searching the web, but they do not solve my problem.

  Please help me to solve it.
  I appreciate your help.
  Thank you.

  Hello Hall,

  Please keep us updated on the status of the issue.

  I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7

  http://support.Microsoft.com/kb/2779064/en-us

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

  IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

  Hello

   

  Thanks for posting the question in the Microsoft Community!

  You can't use the wireless connection and the message that the DNS server is not responding.

  The problem may occur if the computer is unable to connect to the DNS server.

  To check, I suggest you follow the steps:

  Method 1: Re-register the DNS

   

  a. Click Start. Type cmd in the search box and press ENTER.

  b. at the command prompt, type the following command and press ENTER:
  ipconfig/flushdns (there is a space between ipconfig and /)

  It will display the message properly emptied the cache of DNS resolution.

  c. at the command prompt, type the following command and press ENTER:
  ipconfig/registerdns (there is a space between ipconfig and /)

  d. at the command prompt, type the following command and press ENTER:

  ipconfig/all (there is a space between ipconfig and /)
  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

  If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.
  If this is the case, try this:

  i. enough at the command prompt ipconfig and press ENTER

  II. ipconfig / renew in command prompt and press ENTER

  The test again by typing ipconfig/all to see what is the address? (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)

  Method 2:

  a. click Start and then click Control Panel.

  b. go to the networking and sharing Center and then click on change adapter settings.

  c. right-click on connection to the Local network and select Properties.

  d. Select Internet Protocol Version 6, and then click Properties.

  e. choose the DNS server to obtain an address automatically , then press Ok.

  f. Select obtain IP address automatically.

  g. Repeat steps for Internet Protocol version 4 as well.

  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/2e81fca4-35bb-4af9-86a1-7326d2fe91b3

   

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.