Do certain unchangeable things in my control/indicator.

Similar Questions

• Is there an easy way to add text to a chain control / indicator and keep the colors

  Hello

  Bassically I want to add text to a chain control / indicator without losing the formatting of the previous text.

  For a part of a program that I create, data will be transmitted to and from a serial device. I want to display this data in a chain control / indicator and change the color of the text of certain strings depending on data type (sent, received). Basically as a nice log window.

  

  At the moment, I update the chain control / indicator by reading the text and concatenated with the new string. However, this method removes the colors of previous text :-(

  Is it possible to add data to the control of the chain / indicator without losing the text previous formatting?

  I started to create a sub vi who reads a text both character and adds a new element in an array (offset color and text), if the color is distinguished by the previous character. Only problem is it seems to be quite time CPU.

  Thanks in advance,

  Matt

  MattB-5906 wrote:

  Is it possible to add data to the control of the chain / indicator without losing the text previous formatting?

  Actually, no. This means that you will have to use workarounds. Your workaround solution seems a bit involved. Basically, all you need to do is just to keep track of the pairs of end start/selection selection that must be colored in a table. Then just you loop in this table to color the text marked by the power positions.

  An alternative is to use a different indicator. Rather than an indicator of the string, you can use a table with a column. You can then set the foreground color on a cell by cell basis, and add a new line (row) will not affect the coloration of the previous lines.

• Control indicator

  In the weblogic definition authenticator provider, what does the content of the control indicator (REQUIRED, NECESSARY, SUFFICIENT, OPTIONAL) mean?

  HEY YOU,.

  WebLogic control indicators are decisive indicators for an authenticator. The value is REQUIRED, CONDITION, SUFFICIENT or optional. You can see the console Help for a detailed explanation of these values.

  The default authenticator has a default value of REQUIRED which should be changed either SUFFICIENT or optional so that users who are only OpenLDAP to be able to connect to with the WebLogic without security infrastructure also be embedded LDAP.

  Topic: for how to set these flags?
  http://download.Oracle.com/docs/CD/E13222_01/WLS/docs91/ConsoleHelp/TaskHelp/security/SetTheJAASControlFlag.html

  Topic: namely sense of control flags job?
  http://eDOCS.weblogicfans.NET/WLS/docs81/secmanage/providers.html#1187595

  Thank you
  Véronique Mody

• Position of the mouse in a chain of control/indicator

  Hi all

  By using LabVIEW 2015 and would like to know if it is possible to do the following...

  I have a string with a paragraph or two of text.  In this text, certain words and phrases are highlighted (by different font color).

  I would sense when the mouse is positioned on one of these and change the type of cursor when it is over them.

  .. think of hyperlinks in a browser.

  I feel when I'm on the control of the chain itself, but not for specific text.

  Any ideas?

  Thank you!

  Charlie

  The string should contain a method that takes the coordinates (which you can get from a mouse event down or move the mouse) and tells you where it is in the string. Create a node to invoke for the string, and then select the method used (I think he called Point byte Offset). I don't have any experience with it, but I guess it compensates for things as sizes of scrolling and the police.

• Workspace: unregistered control/indicator Digital Format

  Hello

  Using VS 2013, I'm not able to maintain the digital format of a digital medium.

  

  • Open and run the project delay example of Sinewave
  
  
  • On the workspace, do a right-click on a digital indicator to open the dialog box change point
  
  
  • Go to the tab Format & accuracy, Format has a value other than Decimal (engineering here) click OK.
  
  
  • Save (File' Save) and leave the workspace
  
  
  • Run the project again
  
  
  • On the workspace, do a right-click on a digital indicator to open the dialog box change point
  
  
  • Go to the tab Format & accuracy: Format value is decimal (and not the previously defined value)

  I do not think it is the expected (also tested with VS2012) behavior. This applies also to controls.

  I did something wrong? Is this a bug? Am I the only one having this problem?

  Best regards

  Matheiu Hey,.

  It is certainly a bug. It shouldn't work like this.

  We have the question followed internally as CAR #449833. Keep an eye on this number in the section of the fixed a Bug of version of the fix to come/releases readme (similar to this). We should hopefully get it sent soon!

• Cannot start weblogic after the change of the control indicator

  I read the article on http://edocs.weblogicfans.net/wls/docs81/secmanage/providers.html#1187595
  I create 2 SQLAuthenticators, MySQLAuthenticator and testSQLAuthenticator (someone told me that it is not necessary to do so. But I just give it a try). In my weblogic 10.3.5, he has 2 authenticators by default, DefaultAuthenticator and DefaultIdentityAsserter.
  
  1, MySQLAuthenticator = testSQLAuthenticator = DefaultAuthenticator = OPTIONAL, weblogic may be starting
  
  2, MySQLAuthenticator = STATUS testSQLAuthenticator = DefaultAuthenticator = OPTIONAL, weblogic is impossible start
  
  3, MySQLAuthenticator is ENOUGH, testSQLAuthenticator is DefaultAuthenticator = OPTIONAL, weblogic may be starting
  
  4, MySQLAuthenticator = testSQLAuthenticator = SUFFICIENT, DefaultAuthenticator = OPTIONAL, weblogic may be starting
  
  5, MySQLAuthenticator = testSQLAuthenticator = DefaultAuthenticator = SUFFICIENT, weblogic may be starting
  
  6, MySQLAuthenticator = REQUIRED testSQLAuthenticator = DefaultAuthenticator = SUFFICIENT, weblogic is impossible start
  
  7, MySQLAuthenticator = REQUIRED testSQLAuthenticator = DefaultAuthenticator = OPTIONAL, weblogic is impossible start
  
  In the article: REQUIRED - if the user passes the test of authentication this authentication provider, other providers are executed, but may fail (with the exception of the authentication providers with control JAAS value REQUIRED indicator)
  
  Why can't I just put REQUIRED and NECESSARY for the authenticators. Where's the harm?

  You can create a group called administrators in your SQLAuthenticator. In this group you can add users, for example,
  WebLogic or other users.

  But as posted before that not really it is recommended that a group of Admins other authenticators that
  the default authenticator.

  Best is to simply add users of the application to your SQLAuthenticator and leave administrators in embedded WebLogic LDAP.

• Table of the clusters of the control indicator

  Problem:

  There is an array of clusters that indicate the various equipment detected on the serial bus by the make, model and serial number.  The goal is to provide the user with a complete list and will allow them to select individual units to perform several different, such reportoire that remove it from the list and check all the, which are dealt with in a mouse down, or the value changes the structure of the event.  How can I keep a control such as a button, connected to the element of the respective cluster in the table?

  If you do not put the button inside the table, you can calculate the position of the table using a property with the IndexVals property node.

• Control/indicator in the case of error?

  Hi all

  I forgot something that starts to bother me.  If I create a Subvi with a case of error structure.  If I put all my indicators/controls inside or outside the structure and why?   Thank you!

  Until I read the case, I suppose that the tips of the "clear as mud" Post are still valid.  Try to put all the orders/lights on the diagram of the root.

• Master page do not reflected in the related pages (was: new version of Muse certainly screwed things up.)

  A lot of questions to the same reference, but promary among them is the Master Page is not properly reflected on the pages in the browser.  They look good in the design window, but get screwed up when published.

  This problem is specific to the edition in British Colombia and IBE (in browser edition activated). We are working on a fix. In the meantime, you can avoid the problem by turning off "BIE" in the Panel "Advanced" to "file > Site Properties ' and publish again.

• How to duplicate indicator each in a page of tabs controls?

  I have a control tab with 3 pages, each page containing a similar table.

  The cards have an unpredictable number of plots is determined dynamically at run time.

  I don't like the legend of native of the graphic field, because I want to only display a few entries of legend, not the whole legend.

  So instead, I made a table with colored cells and text that changes length at runtime (adjusted through property node).

  I can place this legend of the plot next to the tab like this control:

  

  Now, I want to use the method "Download Image" to record images of each page of tabs controls. It works well, but lacks the legend of the plot.

  Is there a way I can have my own legend of land included in each page of the tab control? For example, to display a "clone" of the table of the legend of route in each page of controls tabs?

  Basically, I need a convenient way to duplicate my indicator "Trace the legend", including font color, cell color, length of the table, etc. dynamically at execution.

  How should I do?

  Note: If I place my table floating in front of the tab control indicator, it is visible on each page, but the method 'Download Image' will, of course, omit it.

  It's a little messy, but it does the job. He takes a picture of your entire façade well so if there are controls, you do not want to include in the image, they will need to be edited after the fact.

• What is the right way to use variables controlled by the two buttons and programming?

  First of all, I apologize if this has been discussed before.  I know not how to phrase succinctly the application, so maybe I just missed the search terms.

  We have several pieces of the Labview software in the laboratory that automatically control things like the taps and heaters.  Sometimes we also manually control these same things.  I'm moving old NI PCI (and older versions of Labview) maps to a variable and based on compactRIO system shared network.  However, I'm still not on best practices to achieve.  I need to be able to have a script running at any time control panel so that I can access, for example, a valve controller (which is just a Boolean), and I need power open and close the valve by programming other scripts.  I need, of course, the control panel to track the State of the valve until it opens another script, the Panel indicates that it is open, and the next push on the control panel it will close.

  Historically, this has been processed using structures business to move from a "computer control" and "hands-on" with global variables that define the State of the valves.  Of course, this is not recommended.

  So far, I've played with the help of two variables, a status of valve and the other for the State of button.  The Panel configuration then loops, reads the status of the valve and puts the State of button if the State of the valve has changed.  I can do this with registers at offset or with the structures of the event, but anyway, it gets very crowded and seems inefficient.  Is there a good way to do this in Labview?  It seems this is a common problem, so I hope there is an easy and elegant solution that I've missed.

  Variable published use shared network.  Your scenario and your manual of the interface and change the variable and then shared your cRIO reads fair value and writes the appropriate values.

  Now for a cool part.  On your manual interface, right-click on your heart control that you want to use to control the shared variable and go to properties.  There should be a data binding tab in the Properties dialog box.  You can bind a control/indicator to a published network shared variable.  So this button will always be attributed to the current state.

  Your script should just read the shared variable before resuming to verify that it is in the correct state.

• Choose between the control of sting and constant string.

  Hello

  I need help with a program. I've attached what I'm trying to do here. There are 2 cases init and Add. I enter a value chain in the chain I / p or control channel and click on add, it will add cases where the value of the entered string goes in the chain or the output indicator. Now what I'm trying to do is if I don't get any value then I clicked on add a predefined string constant must go in the output. This is what I am trying to accomplish. The reason why I'm doing this is I did a similar thing in another program with 2 cases init and Add. But here instead of 1 string I / p there are many i / ps and the creation of an output table. But the problem is whenever I have to enter each value and press Add. I wanted to do it in a way I get 1 of those remaining and string values it bed from the constant, please help me how to program it for helping me with the Sub attached with 1 chain control, indicator 1 channel and 1 string constant. Thanking you in advance.

  Like this?

  

  With regard to the second part of your message, understood that you talk in which case of tables and multiple entries.

• Move the controls the façade of a VI. How do you get a reference to a whole "grouped" controls?

  Fundamental problem (boring, if not disastrous - but common - at least for me):

  When you try to two sktick different screws together and you copy the block diagram from one to the other, it sticks all the controls in the middle of nowhere.  Then, you will need to spend about 10 minutes by dragging controls to the screen from one end of the diagram to another - sometimes more than 15 screens.  Surely, there must be a better way?

  * Either by the way, you might think that labview would have this kind of parameters in the 'properties' of the control in the right click menu - but not joy.

  I guess the obvious thing is that you can write a VI that will get a reference to a particular control, then say together, that is the position (x, y) to zero.  The only thing is that generally, there will be a selection of controls, and often they will be organized nicely - after bring them to zero that you don't want to rearrange their new.  I tried grouping, controls, but then the problem is - how to get a reference to a group of controls.  If you move one of them it does not keep the spatial arrangement.  At this point, I lost - and easily spent more time that should fix this problem.

  Any thoughts?

  If I understand you correctly, when you copy the block diagram of the second VI in the first, the controls of the second end of VI place far-field on the left on the front panel of the first, correct?  I think that these added controls will maintain their relative positions between them so you should be able to find them all as a group in the left field. Then it's all just a matter of how to get them enmasse to the rest of the controls on the front panel. There are some easy ways to do this. There is a button on the toolbar at the top of the front window that allows objects to resupply/group/dissociate the façade. You can select all the orders/lights out in left field and ' ' together them. (As an alternative, you can also drop them all on a tab control that will serve as a container for them). Then you select this group and with selected scroll back on to the existing façade and search and select (shift) ALSO a control/indicator to group existing too. Then with the TWO existing of the selected control and the new group (or a tab with the new group control) selected using the ALIGN buttons to quickly bring a corner of the new group in the alignment of the old control. At this point, you can unlink the news and move it where it should be.

• Writing only to certain parts of the cluster in an array by reference

  Hello

  I have an array of clusters that I use as well to view and enter data, i.e. elements of the cluster are unmodifiable (disabled) controls used as indicators of "false" (numeric values, strings, LEDs) and some are normal witnesses (numerical values, buttons).

  The "indicator" part of this cluster table must be constantly updated (for example with the positions of the engines), normally by replacing the elements according to cluster in a loop and writing in the table. This can lead to conditions of race with the part 'control': If the user enters data in a 'bad' timing control, it gets immediately replaced by the old value - in this case the update process began just before the user input and completed just after the entrance of (which may be a simple click is enough) , so the old values of controls are rewritten on user controls, as the table should be rewritten as a whole.

  Now, I'm looking for a solution to this critical race condition without changing this 'mixed' approach of control/indicator (e.g. by control and indicator tables separated next to each other and paired scrolling or so - which would make it much more horrible GUI design, among other disadvantages). I know that it is possible to change the value of an element in the cluster without having to rewrite the entire cluster using the element reference. However, it's more complicated if you have an array of clusters, because you want the cluster to a certain index table and to my knowledge, there is no such property that gives you for example the reference to the item table located in an index of certain (who is a lack of long date in the table of Labview manipulation). If you change the 'value' of an element of the cluster property in a table, it seems to affect the 'last active' element of the array, at least it is correlated with the array element that was clicked on last. Maybe there's a way somehow programmatically set that ' last active ' array element and browse the table in this way (setting the flag "correspondent" elements of the cluster by reference) or maybe someone knows a solution 'Nice' and elegant?

  I hope you understand what I mean

  Thanks in advance!

  To avoid such conditions of race, make sure what you write on the Board in the same place change you and write only the data for the indicators. Practically, this means that if you have an event for the control change value, you must have another case of event in the same structure of update of the indicators (timeout or a user event) and make sure that the indicator event takes the rest of the data of the current value (for example through a terminal or a local variable or the DVR suggested Steve). Similarly, you can use the terminal control to the current value of the control for the indicators rather than depend on the event containing the correct value.

• for control voltage can we use usb-6001?

  where can I find the usb-6001 software and driver?

  You can certainly use a 6001 to control the tension... in line with the specifications of the device.

  Driver belongs to DAQmx, available here: http://www.ni.com/download/ni-daqmx-14.1/4953/en/