Progress bar stuck in updating to ios 10

Similar Questions

• Grey screen with progress bar stuck while refreshing at 10.11.3... any suggestions?

  My screen grey remains with the progress bar stuck on this update... suggestions?

  Mac Pro 2012 (5.1)

  Install the update or you complete the update and it is restarted before?

  If this is the first installation and it has stopped progress on waiting for installation remove all external devices from your computer except for the mouse and keyboard. If the computer responds you will need to determine if one of these devices is the origin of the problem. If disconnect these devices has nothing to restart and reset the VNRAM with these disconnected devices.

  https://support.Apple.com/en-us/HT204063

  If OS X 10.11.3 was already successfully installed before that date and you can't go past the gray screen, now you must restart in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

  If it fails, disconnect all external devices, as recommended above, and repeat the process.

  If the computer restarts in safe mode but not normal boot with those external devices separated you may wish to provide us with a report of etrecheck to determine if a software is causing the problem.

  http://etrecheck.com

  Of the likely reasons for software are any application of third party for 'cleaning', 'keep' or otherwise 'anti-virus' packages which are known to the troublemakers on mac OS and must be uninstalled. AV of Mac isn't Windows AV, it is not necessary at the moment and has been cited as a cause of the incompatibility of the system and offers no real protection from the root.

• Why is the Windows Vista Service Pack 2 Installation Progress Bar stuck?

  I downloaded the Service Pack 2 of Windows Vista, so I could install an application on my computer. Is not compatible Windows Vista Service Pack 1. I've been sitting in front of my computer for a while and the green bar progress is stuck at it seems to be 100% or 99%. I was going to complete the process, but I don't want to damage my PC.

  Too bad guys! I had Windows Update running in the background and my computer is automatically restarted on 5 Minutes after!

  Tips:

  Make sure to close all programs and applications that might interfere with the Installation of the Service Pack.

• Try to install the apps CC, progress bar stuck

  I spent most of my day trying to get the Cloud Creative desktop application installed (I had now create a new user on my computer that has apparently fixed that), and when I tried to install hearing as a test, the progress bar is stuck at 40%. Since he was going nowhere, I tried to cancel it, but it got stuck on the cancellation for centuries. So what I did close the app, put an end to all Adobe processes and open Office CC again. He crashed twice, and then I tried to run as an administrator. It is now running, but my download of hearing is now stuck at 11 percent without obvious reason.

  Anyone had similar problems? Is it possible to fix it? (I tried to delete the adobe files in %AppData%).

  This is a 64-bit computer if running on what should be fully updated Windows 7 with 8 GB of RAM and an i5 4670K.

  Well for some reason, it now works perfectly and everything is installed, I don't know what was going on.

• Update the progress bar

  Hello

  When the records are saved in the database SQLite in my application I want to show the progress, because it may take a few seconds, if the amount of data to be backed up is large. So I defined a variable of the ProgressBar:

  private var _pbSaveContent:ProgressBar = new ProgressBar();
  

  Initializing the user interface I define the attributes and add it to the scene, but still manage not visible (I do that only when the feature there is place to save records is requested):

  with (_pbSaveContent)
  {
      width = 624;
      x = 200;
      y = 250;
      height = 10;
      visible = false;
  }
  
  addChild(_pbSaveContent);
  

  Now, when the function is executed to save records in the database I first make visible progress (among others) bar:

  _pbSaveContent.visible = true;
  

  then count the number of records to be created and then use this number to update the progress bar after every saved recording:

  _pbSaveContent.progress += _numProgressStep;
  

  I was expecting to the progress bar would be updated every time with the above statement, but the progress bar (filled to 100%) is displayed after all records have been created.

  How can I solve this?

  Unless there is a way to force the Flash to operate on a synchronous cycle frame, you cannot get this to work without changing your stuff of SQLite to use asynchronous support.  I never heard speak in a kind of routine "updateNow()" who would be able to do this, but I'm not a Flash developer for a long time so I could easily just have heard of him yet.

  Search the openAsync() call in the SQLConnection documentation to learn more about the switch to asynchronous SQLite stuff, where the database work is done in another thread and does not prevent your UI to update normally.

• Progress bar does not

  Hello.

  I'm struggling with a problem below.

  That there is no solution?

  I'm trying to display a bar of progress during treatment.

  However, if the process is long, will be the progress bar dialog is displayed as 'no response '.
  It makes no sense as a progress bar.

  How to solve it?

  I get the same hiccups "unresponsive" (script always running in the background), I'm on Windows 10, latest version CC

  adding show(), I get always him "not responding" but updates of progress bar

  Win.Update ();

  Win.Show ();

• Progress bar get about 60% and stuck

  Hello

  I had difficulties with the last update of El Capitan - my imac will not re-start and could get stuck on the spinning wheel. I could turn it off with the power switch and turn it back on w/out the update and it works great except for chrome.

  Today I was asked to restart the update and I thought I'd give it a try. This time, he stops normally and looked like it will re-start! While she has been reset the progress bar froze on the gray apple screen and then the screen started to Flash. If anyone has any suggestions on how to fix this would be appreciated. Thanks in advance!

  Use the Combo Update 10.11.6:

  Apple - Support - downloads

  The Combo update is a complete installation, as opposed to an incremental "delta" update, so you have to overwrite all files are damaged or missing. It does not matter if you have previously applied. All your data and settings must be kept, but that said, you should always have a backup.

• iPad 2 Mini stuck on the progress bar with the Apple logo and progress bar is not loaded, his impasse

  I pressed on restart all the settings on my iPad Mini 2, so it loaded but it drained. So I rebooted it until he turned back when he turned his back, it was still showing the progress bar, but it was quite moving. I tried to hold down the lock button and the home button, but still, it loads, its stuck on the progress bar and did not progress. I tried to connect to my computer to connect to itunes, but it does Duke host because its deadlock on the progress bar with the apple logo.  .pls help me!

  Try restoring your backup and recovery mode: If you cannot update or restore your iPhone, iPad, or iPod touch - Apple Support

• Stuck on Start Up Apple screen logo with 50% progress bar, tried everything. Help, please!

  Hello world. I'd appreciate it really all the advice that you can offer me to help me fix my laptop. I have a mid-2010 Pro 2.4 GHz Core 2 Duo Macbook running OS X Yosemite. A year ago, he started trolling a lot, so replaced the HDD with a Samsung 850 EVO 120 GB SSD internal 2.5 inch SATA III. He works much better since.

  A few days ago, I bought a Google Chromecast and had set up with my MBP. Subsequently, he began trolling and I noticed there are apps in the Launchpad, that I had never downloaded (reader of Google, Gmail, Youtube, etc.). I could not remove these applications or drag them to the trash. Concerned, I decided to back up my files on a USB key and re - install the OS X.

  However, during the priming of the MBP, it is stuck on the Apple logo screen, with the bar never go beyond 50%. (Photo: http://postimg.org/image/66qh6x633/)

  What I tried:

  PHASE 1 (Before reformatting)

  -Safe Mode: Button power button and shift held down. Hit or miss, worked 1-2 times, but when I reboot, is again stuck at the Apple logo.

  -Reinstall OS X: CMD + R; After 15-20 minutes get to OS X utility screen; Reinstalled OS X Yosemite; 7 hours to reinstall - but when the mbp restarts to complete the installation, it is stuck at the Apple logo again.

  -Reformatting: CMD + R; 15-20 minutes get to OS X utility screen (several reboots to work); Select repair for all discs/drives (Samsung SSD, HD Recovery). Exit said that both are very good; Select clear to HD recovery. When this was done, I tried to reinstall OS X Yosemite, but the MBP shuts down suddenly. When I turned on it again, it is returned to be stuck on the loading screen Apple logo. Attempt to restart after 15 +, but same result every time.

  PHASE 2 (After reformatting).

  -Power-> CMD + R = blocked screen Apple logo with 50% progress bar

  -Power-> Option = shows 2 player and free Wi - Fi area (Pic: http://postimg.org/image/58qi2j1vl/); Have you tried all the combinations, but regardless, always gets stuck at the screen of the Apple logo to 50% complete, after an hour, I suddenly hear ' to use English as the main language... ". ", but the screen is still stuck. I left it on 36 hours once and nothing has changed

  -Power-> Shift = error (Pic: http://postimg.org/image/tahklsvy1/); Keep restarting or shows some other error (Pic: http://postimg.org/image/thstc6b59/) and restart. Never crosses.

  Tried other things:

  -Reset PRAM: When restarting MBP, is stuck at the Apple logo screen, 50% progress bar

  -Reset SMC: Stuck on the Apple logo screen for a long time and then the screen turns off, but the laptop is still on. When I press Caps Lock, the indicator light lights up. Also, after some time, I again hear "to use English as...". "even if the screen is off. No matter what I press, it does not wake up to the screen.

  Note:

  -The bottom of the laptop feels hot (maybe), but I do not hear the drive in motion.

  I am trying to save my mbp because I can't get a new one for a few months. Any advice/help is greatly appreciated! Thank you very much!!!

  P.S.: I only am not too computer savvy, please use everyday words words/non-tech, when possible, thank you!

  Remove the SSD and install it in a closed Chamber.  Connect it to the MBP via USB.  It will start?

  Ciao.

• Since the installation of the last update of iOS on my iPad I'm unable to type in the address bar of safari. I can access the Web sites of my favorites, but when I try to enter a new address safari closes its doors.

  Since the installation of the latest update on my iPad, I'm unable to type a new address in the address bar of Safari. I can access the Web sites of my favorites, but when I press the address bar Safari closes its doors.

  I reset holding home and power button at the same time. I did that 4 times. I also left all the settings.

  I am also unable to access the server from imessage. I don't know if these two things are related, but the two that happened after the update to iOS 9.2.1

  Since this announcement, I found a Reddit thread that suggests a temporary solution by disabling Safari suggestions. It worked for me.

• Just updated to ios 9 and my ipod touch is stuck at 'update of the iCloud parameters.  I can not restore from iTunes as I have to disable 'find my iPod toch' and cannot do the iPod is blocked with the message to update.  Will not work force a stop down.

  Just updated to ios 9.2 (from 8 something) and my ipod touch is stuck at 'update of the iCloud parameters.  I can not restore from iTunes because I have to disable "Find my iPod touch" first of all, and I can't do as the iPod is blocked with the message to update.  Forcing a stop down does not work that for some reason, I am unable to turn off my iPod touch manually.  I tried to turn off my wifi to see if that stops the iPod touch, but he always keeps on the message to iCloud.  Do I just wait until the battery sinks so that it forces a reboot?

  Place your iOS device into Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.

  iOS: I forgot the password or disabled device

  If the recovery mode does not work, try the DFU mode.

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  To learn how to restore:

  iTunes: restore iOS software

  To restore backup see:

  Restore your device from an iCloud or iTunes backup - Apple Support

  If you restore from a backup of iCloud apps will be automatically downloaded. If you restore from backup iTunes, applications and music must be in iTunes since synchronized as music media library and apps are not included in the backup of the iOS device what iTunes does.

  You can re-download most of iTunes purchases by:

  Download after purchase from the App Store and iTunes Store iBookstore

  If no problem what happens or doesn't happen, and when in the instructions? When you get the iPod into recovery successfully mode and connect to iTunes on the computer should say that it found an iPod in recovery mode.

• Progress bar not updated until the end of DLL fn

  I have a DLL that I am incorporating in a wrapper using LabVIEW 2011 SP1 Subvi.

  The exported DLL function updates the program on a PIC Microcontroller memory by creating an interface with the boot loader using only its own protocol CAN interface.

  The service takes about 20 seconds to write, read and check the operation succeeded, and I try to add an indication of progress.

  I have a LabVIEW test application vi which calls the Subvi dll and has a progress bar to provide feedback. Unfortunately I can't get the progress bar to update when the DLL is complete, but not when it does not, then he jumps just from 0% to 100%

  I made the assumption that the DLL is hogging the cpu and not allowing other indicators of labview to day or loops to run.

  The DLL includes calls to sleep briefly (3ms), and I upped half a second to see if that makes a difference

  It doesn't seem to be a way to get other items of LabVIEW to grab a slice of CPU.

  I tried to lower priority of Subvi to see if other threads in the code will preempt.

  I tried from the Subvi as an asynchronous call and collect the return status (with a waiting on asynchronous call) while a separate loop surveys trys to update the progress bar by calling a function exported in the same DLL accessor to get the value of the status property

  I've tried passing a blade refnum and update the property value directly from the DLL function from pointer to the value of parameter of function.

  I tried several variations and combinations.

  Is there a fundamental issue that prevents me from actively update the progress bar, while the DLL function runs, or am I missing a simple mechanism to achieve my goal.

  I look forward to suggestions of solutions or additional reading of the forum

  Thank you

  DLL called in the UI thread? If so, try switching to the call of Thread Safe (if DLL allow, of course)

• Download of the updates of Windows 7 is no longer displays a progress bar and shows instead download Windows 10 which is not. How can I fix?

  For a few months now, since Windows 10 became available, download updates to Windows 7 is no longer shows the progress bar during download or installation u [pdates.  It shows only 10 of Windows that is not downloading.  Indeed updates get installed OK, but no progress of any dind is shown.  I have downloaded and run the Mocrosoft update tool that does nothing to fix this.  I'm not entering the registry to fix this if necessary.  Microsoft has a fix available that I have not yet found?

  FIXED A PROBLEM.  May 18, 2016, I chatted online with Oliver, a Microsoft technology and explained my problem.  I told her I used Windows uptate tool and repair Microsoft tool nothing helps.  He took control of my desktop with my permission and completely removed all Windows 10 applications since I don't foresee the download of Windows 10.  To my surprise this morning I received a notice to update regularly Windows for 8 major updates Windows 7.  When I chose to download, the porgram climbed the alsways has showing the progress of the download as well as the progress of the installation.  The reference to Windows 10 has now disappeared from the update page, thank God.  Thank you, Oliver.

• The progress bar just kept scanning without generating a list of updates or error messages

  I have a hp G70-463 CL portable 2009. It works well until March 2016 when it could not download updates Windows 7 Ultimate. The progress bar just kept scanning without generating a list of updates or error messages. I reinstalled Windows, but this does not solve the problem. The PC otherwise works fine. I can download the software successfully. What is going on?

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  I suggest before you stop and install the updates, disconnect from the Internet, first.

• Progress bar not updated on Windows

  Hello

  
  I have a script that creates a mask on each frame of a video. In the user interface, I have a progress bar (with the maximum value of the number of my video image) that increments every time that the work on the framework. I also have a counter of the completed framework.

  The progress bar and the meter work well my mac (CS6), but on my windows (also CS6) the progress bar and the meter will not refresh. Instead, a rotation beach ball appears. The script itself works on both systems, but I don't have the updated progress bar and counter Windows.

  Any ideas?

  Thank you

  Hello.

  Can you post your code?

  You can also try this:

  1. var PBWin is new window ('palette', 'Progress', [0,0,300,70]);.
  2. var ProgressText = PBWin.add ("statictext", 12,10, 190 (30) and "Progress");
  3. var ProgressBar is PBWin.add ("progressbar", [10,40,290,60], 0, 50);.
  4. this.windowRef = PBWin;
  5. PBWin.show ();
  6. PBWin.center ();
  7. for (i = 0; i<50;>
  8. ProgressBar.value = i;
  9. ProgressText.text = "treatment of things" (ProgressBar.value + 1) + "of" + 50; ' "
  10. PBWin.update ();
  11. $.sleep (200);
  12. }
  13. Alert ("Done");