Do I have to use the color cartridge if I want just the black and white to save my color ink cartridge?

Similar Questions

• Is there a convenient way to selectively apply the black and White Conversion?

  First of all, I know how to use the black and white adjustment layer and I am familiar with masking. What I want to do, it's something more complicated.

  When I convert a picture n & B, I often find that there are areas of the image that would benefit from a slightly different treatment than the rest. For example, I have a lot of foliage that I want to run by using the yellow and green Sliders, but maybe there's Green House which I want to clear up instead. Using a black and white layer adjustment I can't make this kind of decision as it effects the entire image. And other layers B & W setting on one has no effect because it has already been converted.

  My first thought was to use two different adjustment layers, one with a mask reversed on the other, but not only is it very clumsy (what happens when you need more of two sets of adjustments, but it always seems to be an area left along the border of the selected areas / unselected masks where some remnants of color.)

  Use B & W adjustment layer and mask areas that you want to assign. Set the blending mode to luminosity. then you can put a final above all convert to the true B & W.

  

• Hi, I have cs6, indesign, and I can't use the black and the white arrow. I just bought the cs6. can someone please tell me what I did wrong. Thank you, alexandra

  Hi, I have cs6, indesign, and I can't use the black and the white arrow. I just bought the cs6. can someone please tell me what I did wrong. Thank you, alexandra

  https://helpx.Adobe.com/InDesign/KB/InDesign-tools-panels-Don ' t - respond.html

• I want to print black and white with empty color cartridge. My model is all-in-one HP Deskjet 4288.

  I want to print black and white with empty color cartridge. My model is all-in-one HP Deskjet 4288.

  The Deskjet F4288 joined the printheads on the ink supply.  These are replaced at each change of cartrdige so there is no concern about printing empty color or black cartridges.

  You should be able to print in ink entry mode "backup" by removing color (or black, but not both) cartridges.  There will probably be a warning message about ink backup mode but you should be able to print and the printer will work regardless of the cartridge is available.  In handwritten backup with the only color black cartrdige mode areas will print in shades of gray.  If print ink backup mode only the installed color cartridge then black will be printed by mixing colors.

  See page 75 of the manual here, that says:

  Use the entry ink-backup mode
  Use ink-backup mode to operate the HP all-in-one with only one cartridge. The
  ink-backup mode begins when an ink cartridge is removed from the print cartridge
  transport. During the ink-backup mode, the product can only printing from the computer.
  You cannot start a print job from the control (such as copying or scanning a Panel
  original).

  NOTE: When the HP all-in-one device works in ink-backup mode, a message is
  displayed on the screen. If the message appears and two print cartridges are installed
  in the product, check that the piece of tape plastic protection has been removed
  each print cartridge. When the plastic strip covering the contacts of the print cartridge, the product
  cannot detect the cartridge is installed.

• I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How do I rename them.

  I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How can I rename the Windows 7 and Windows 7 Test to start in one I want right here?

  I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How can I rename the Windows 7 and Windows 7 Test to start in one I want right here?

  Use BCDEDIT to SET the description that you are wanting to "Rename" and also to choose the displayorder, timeout and that you load by default...

  Maybe this old conversation will help you:
   http://www.SevenForums.com/general-discussion/20191-renaming-earlier-version-Windows-dual-boot.html

• Windows XP 07 login I get the black and white screen where is safe mode option and then just loop it back to the same screen.

  When I powered on my Windows O.S. ' 07 I got the black and white screen where the option of safe mode and when I entered beginning that normally he just came back to the same screen of the suggestions?

  Hi RudyNY,

  1. you have Windows 7 or Windows XP installed on the computer?

  2. you receive an error during the process of loop?

  3. did you of recent changes on the computer?

  4 when was the last time it was working fine?

  Check to see if you can boot into safe mode in the Advanced menu options and the last good known Configuration.

  http://www.Microsoft.com/windowsxp/using/Setup/support/nostart.mspx

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

• CC opacity keyframe on the black and white adjustment layer does not work

  Hello

  I use the first cc under w8.1 pro

  Well, I noticed a strange behavior

  I added a layer of regulation, the black and white effect and several keyframes

  seems that first reads only the first

  for example

  (1) key-> @0 % frame the second keyframe @100 %, the video is all in color, no matter how much of I add keyframes

  (2) the first key @100 second @0 % (opacity) the video is in black and white, again no matter how many I add keyframes, only the first is read

  I tried the black and white effect on video titles, and so on and it works perfectly, it does not work on the layer of regulation

  I tried other effects on the layer of regulation and they work

  is a bug?

  There is a known bug in previous versions?

  Thank you

  I can reproduce the problem on my system, 8.1 or Mac OS 10.10.3 body.

  MtD

• Develop the preset for the black and white Points

  Is it possible to create a preset that will find the correct point black and white individually for each photo to import?

  The [auto tone] button in the quick develop Panel is as close you will arrive at an Auto setting of the black and white points.

  But many find it also changes exposure requiring several slider adjustments.

  You will get the best results if you hold down the [ALT] key when you move the black and white sliders, or press 'J' to set the clipping indicators in the histogram of mode of development. (Blacks show blue, white and red)

• Always the color in the photos after the black and white conversion

  Hello

  I have a very strange problem. After the conversion to black and white photos in Lightroom (no matter if I chose B & W in the basic menu, set the saturation to 0, the HSL value 0 saturation sliders or choose a B & W preset) my photos have still a few colors in them. Before and after have exported them.

  The pictures are taken in RAW with a 550 d or a RX100. Same results for all. I use Lightroom 4.3.

  I searched a lot on google and also here in the forum and have not found anything.

  Any ideas?

  Kind regards

  Julian

  

  If you have Lr and PS side by side they appear identical. If they are not something certainly will not, and I agree with ssprengel that it's most likely a monitor profile bad that one of them is choking on.

  If you don't calibrate and profile the monitor yourself (what is the right way to do it), the safest bet is always to use sRGB (or if you have a wide range of monitor the Adobe RGB, but you do not have). > This thread contains a description of how you do it.

  ---

  Some information:

  Monitor profiles contain two parts. One, quite simply, white fixed point, correct the response curve and remove color casts. It is loaded into the video card (or the screen itself) and affects all across the system. This is the part of the calibration.

  The second part is the profile itself, which is more complex. It is, in short, a complete description of the features of monitor in three-dimensional space color. Among other things, it defines exactly the position of the three primaries. It takes the calibration in the image, so in other words it is a description of the screen in its calibrated State. But only color management applications to read the monitor profile and debug to display accordingly. Other applications just ignore it and send the numbers directly through.

  This second part, the profile itself, is what often causes problems because many profiles are not properly written. Manufacturers of monitor (and portable) are known for this. You would think if he succeeds, but it's not fair.

  To compound things, these bad profiles are often pushed through Windows Update, so that people don't even know they are being installed.

• I am trying to print in black and white to save the ink color on a officejet 6500 has

  I am trying to print in black and white with my hp officejet 6500 a. I use a macbook with safari.

  Can you help me?

  Hello

  1. Open the file woiuld you want to print, and then click file > print.
  2. Look for and click on the area of selection below, known as the name of the Application (e.g. Safari) ot Copies & Pages in MS Office print dialog box.
     You may need to dedicate the printing options by clicking on the arrow next to the name of the printer for Mac OS 10.6 or by clicking on the button show details for Lion.
  3. Click on Paper Type / quality.
  4. Click on the arrow beside Color Options to spend the color options.
  5. The value of color to Grayscale.
  6. Now you can set like quality or using black ink only.

  You can save your settings for future use by clicking on the preset selection box.
  Then, you'll be able to easily select from the presets list

  Please let me know of any questions,

  Shlomi

• Creating sectional color thanks to the black and white effect

  Hi all!

  Given the beautiful Muse model that uses Parallax scrolling, then at some point, there is what appears to be black and white images with sections of transparency showing the image color below. Someone know how to achieve this effect or maybe a tutorial that could point me in the right direction?

  Here is link to the model in question:

  Fashion Show Preview - ThemeForest

  Jody

  Hi Jody,.

  What kind of effects is applied through some specific widgets which are also made by-

  https://themeforest.net/item/fashion-show/5411127.

  Therefore, you should contact directly or either purchase their theme, as they are already patented.

  Or you can search all of this widget on Adobe Muse Widget Directory

  Kind regards

  Ankush

• Is it possible to get a transparent background for text and to vary the color of the text of the black and white?

  By the question, you can obviously tell that I am a newbie in InDesign. I have a cover of the album I'm working on, and the printer says that exit Photoshop will be rasterized and InDesign is better for clarity. However, in Photoshop, it's easy to overlay text on a chart where the text background is transparent, so the graph through, and it is also easy to change the color of the text if you wish.

  Change the opacity of the slghtly even filling in a text box in InDesign appears to degrade the quality of the text in a substantial way. I do something wrong, and is it possible to get a transparent background around that? And also, text must be only shades of black and white and no other colors?

  I would appreciate anyone who can take the time to respond to what is probably something obvious to most of you.

  Michael

  I realized that I forgot to include the screen Cap illustration. I'm sorry.

  

  I seem to be brain dead on terminology, too. The density of Tint slider is clearly labeled hue, no opacity, nuances and not creat a transparent color.

• I can't seem to change the black and white on my Lexmark printer.

  At the same time, I changed my printer set default print black and white.  Then I would just change color when I need it to be.  Then I noticed that the check box for printing black and white has been checked and gray, so I couldn't change it.  I thought it was because I was really low on my color.  I now have a new color in this cartridge, but still it won't let me uncheck the box in black and white.  I tried to restart my computer but no change.  Help, please.

  I have a Lexmark 7600 series.

  Check the settings of the printer itself to verify that it is not changed and there only in black and white (if there are all these settings on the printer)-which would probably override the settings on your computer.  BTW, what is the exact printer?  This is it: http://support.lexmark.com/index?page=answers&startover=y&question=lexmark+7600+series&locale=en&productCode=LEXMARK_X7675&segment=SUPPORT&userlocale=EN_US#1?  If not, what is it?

  You can get in trouble with your device drivers, firmware and/or software.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you shouldget them to at least the printer (http://support.lexmark.com/index?page=content&productCode=LEXMARK_X7675&actp=PRODUCT&id=DR11032&segment=SUPPORT&userlocale=EN_US&locale=en (if I was just on the printer above and you are using 32-bit Vista) and all you have time to do - they can help way beyond simply solve this problem)) leave the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html. You can also try the Driver Verifier Manager to see if you can identify the driver or the responsible device (assuming that it is the cause):http://support.microsoft.com/kb/244617.

  Also, check the color cartridge belt moves freely and not get stuck on one side or the other - if the belt does not move, the printer can turn off the option.

  Remove the printer from the computer (I do not mean the drivers or software - I mean the configuration in the control panel).  Create a new printer in the start menu / control panel / printers section. Click on add a printer and start from scratch.  Then see if the new connection/configuration of printer works better than the old.

  If this does not work, then contact Support technique Lexmarkhttp://www1.lexmark.com/content/en_us/about_us/contact_us.shtml and see if they can help you because I don't think it would be a problem of Vista if you have reinstalled everything.  It may be a problem with the installation but it can also be a hardware problem - so be it, they should be able to help.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My HP Photosmart C8180 All-in-One Printer does not scan the black and white film strips or slides.

  This problem occurred recently. Previously, the scanner accepted slides and strips of black and white film and scanned them without any problem. Since I've updated the OS on my iMac (I am currently using OS X 10.6.8), I contacted Applecare because I thought that it was possible that my current operating system might have some incompatibilities with the C8180. 'Expert' AppleCare then accompanied me by a uninstall/reinstall, but it has not solved the problem. AppleCare said then that the problem is no doubt HP hardware failure. I find it quite peculiar since the scanner otherwise Applecare analysis works and there is no problem with respect it print or copy.

  Hi, JAOC,.

  Your C8180 can scan slides or films fixed on the memory card.  This will allow you to test the scanning equipment.

• ATI Mobility Radeon X 1400 with the problem of the TV, only the black and white photo

  Hello

  When I try to connect my TV to my Dell Inspiron 6400 with ATI Mobility Radeon X 1400 card, all I get is a black and white image. I have tride all the PAL settings.

  What I tried: I connected the s-video with an s-video cable output to my TV s-video connector (composite) result: no color image, just black and white of my office.

  I connected the s-video with a s-video SCART cable output to my SCART TV (RGB signal) result: no color image, just black and white of my office.

  I connected the s-video with a s-video SCART cable output to my SCART TV (composite signal) result: no color image, just black and white of my office.

  His is no problem, this workt fine.

  Anyone know how can I get the color on my TV? Is this possible with my s-video cables? What type of signal you send with my Mobility Radeon X 1400 graphics card?

  Kind regards

  Marcel