My printer is not connected and do not print.

Similar Questions

• Impossible to connect the printer to the laptop with a wi - fi connection and get a message saying "print spooler does not", even though troubleshooting it says that it is fixed.

  Problems to connect a printer to my lap top using a wi - fi connection and get a message saying "print spooler not working do not ', even though troubleshooting it says it is fixed, any ideas please?

  Original title: install a printer

  I see an error message about "spooler" problems

  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, you may have to restart the spooler to print on your computer.

  To restart the spooler, the simplest method is to save your work and restart the computer. Alternatively, you can try the following steps:

  To restart the print spooler service

  1. You must be logged on as administrator to perform these steps.

  2. Click Start, type: services , then press on enter on your keyboard

  3. Double-click Services.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. Right click on the print spooler service, and then click Properties.

  5. On the general tab, next to startup type, make sure that automatic is selected.

  6. If the service is not already running, under Service status, click Start and then click OK.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

• Ink advantage 2545: changed the name of the wireless router and now ink advantage 2545 does not connect and I'm out of ideas

  I have a Toshiba laptop 64 bit running Windows 10 Home, 8 GB, 1 t hard drive.

  Router is a Samsung phone using Android because it was the only router that I could find which would take the wireless signal.

  I live very pastoral, no neighbours for miles, so I never saw the need for a password on my router.

  Now, some people are installs in less than 400 feet from me, and I think they're piggybacking on my Wifi because my access speed has slowed considerably since they moved in.

  So I decided to change the password of the router, unfortunately, I can not put in any password I want.  It gives me the opportunity to have a predefined password.  So I changed the name of the router I could do without problem.

  My computer very quickly without any problem, however, my printer which worked great for a year with the old router name does not connect on the new name of the router.

  Here is what I tried:

  I had hoped he would ask me for a new name / password, but it did not.

  Then I plugged a cable between the printer and the laptop in the hopes that it would produce a different kind of results.  It has not changed anything.  There is no screen menu on what that be like this on the printer.

  I pressed the wireless button that has the flashing blue light and nothing happened.

  I pressed the button, don't know what it is, but it has a white light, and nothing happened.

  I went on the HP site and followed the instructions but he just said do not connect the cable until told to do so.  So I disconnected everything, lights out and turned back on and still no connection and no invite to plug whatever it is.

  Y at - it everywhere where I have being a novice could get instructions on how to get this working?

  I appreciate any help you can give me.  Thank you.

  Hello

  I think you are talking about SSID. Please, think of it as a new router and use the following ways to correct:

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html
  
  Kind regards.

• HP officejet pro L7580 not connected and offline

  Why my printer say it is not connected and offline when I check and it is connected and online.

  I can now print wireless! YAY! I had the printing device put wrong in place, but what is strange, it's the I printed about 10 pages without wire, then 10 minutes. later went on to print another page and it wouldn't do it and I haven't had a thing to change the settings! Weird?

  Thanks for your help! ;-)

• ITunes store does not connect and then does not close help please

  OK, so pretty much whenever I try to enter the Apple store that I get a little pop-up that says it can not connect to the Itunes store, I have to check my connection and try again, but whenever I close this box it appears immediately back to the point I can not even close Itunes with having to go Task Manager and ending the process manually.  I can't use the store at all and it's just getting really frustrating, because I know my connection and everything is not fine so it is no reason for this pop up.

  is anyone else having this problem or if you have had this problem and know how to fix?

  Hello LadyJibril,

  Thank you for using communities of Apple Support.

  I see that you have problems connecting to the iTunes Store. I would recommend from the suggestions in this article: If you can not connect to the iTunes Store

  If that doesn't help and you still have questions, then you can proceed to the procedure described in this article: Advanced steps for fixing iTunes Store connection issues

  Best regards.

• My photo booth app [version8.0 (806)] does not work. Sometimes, shows a message saying: "there is no camera connected" and others shows just a black or white screen. I can't do anything about it.

  My photo booth app [version8.0 (806)] does not work. Sometimes, shows a message saying: "there is no camera connected" and others shows just a black or white screen. I can't do anything about it.

  More than likely your MBP has a hardware problem that cannot be properly addressed at an Apple store genius bar.

  You can try to reinstall an OSX, but I doubt if that will be successful.

  Ciao.

• Sorry, we could not conect to Skype. Please check your internet connection and try again

  I use Windows XP and I get the following when I try to connect with Skype.

  Sorry, we could not conect to Skype. Please check your internet connection and try again

  I installed Internet explorer 8, but my Skype doesn't always connect. It keeps telling me to try again

• Satellite L40 don't stop with power connected and is not in sleep mode

  Hello world. I hope someone can help me. Basically, there are two problems: one with judgment of the laptop (Satellite L40 - 17U (Vista 32 bit Home Premium SP1)) down when power is connected and the other with closing the lid and put it to sleep.

  1. in recent weeks, it all of a sudden won't stop, whenever power is connected. When it's on battery, it will stop. When the power is connected, and I try to stop, it seems that it closed down (all activity stops and the led goes off) for about 1 or 2 seconds, then it goes back.

  2. when I close the lid (all settings in Vista are set to put the laptop in a State of 'sleep' when the lid is closed), the laptop enters a State where it cannot be recovered by stopping by pressing the power button for 10 seconds to close completely. When closing the cover, only the battery LED continues to Flash orange (the way it should be), but apparently the laptop keeps consuming power, because when I restart later (first having to close as described above) tends to be quite an empty battery as it was before the next redΘmarrage it (like go from 100% to 65% in 30 minutes as "standby mode"). Also, when I open the cover, the other LEDS will on new (green), but nothing happens.
  After the restart first by pressing the power button for 10 seconds to close, I often get the message that Windows cannot be started and run the system repair.

  I just do a completely clean install with the product recovery CD (has not installed SP1 yet), updated to v1.90 BIOS, but the problem remains.

  I'm afraid that my only option will be to bring him away for a warranty repair, but knowing that these repairs can take weeks, I'd rather try a solution here could someone recommend me first. If you have any ideas, please let me know.

  Thank you
  Daniel Breslauer

  Hi guys

  Never had this problem on my laptop, but with regard to an other users here in the forum the BIOS might help solve such strange behavior for laptop
  To be honest the closed question is unclear for me I noticed a problem before on my laptop but the update of the BIOS helped.

  This is why I recommend update BIOS first.
  If the problem still appears, the ASP should take a look in the notebook.

  Good luck

• How do another firewall my default firewall? I have to start firewall CA every time I connect and the firewall Windows will are also not activated.

  How to make another firewall that windows firewall my default firewall? I have to start firewall CA every time I connect and the firewall Windows will are also not activated.

  Hello

  • What version of Windows are you using?

  You can check this link:

  http://Windows.Microsoft.com/en-us/Windows7/Firewall-frequently-asked-questions

• Upgrade of Windows 8 Wizard says: «we can not connect now...» Check your Internet connection and try again. »

  I have Windows XP and microsoft sent me a message to download Windows 8 via Windows 8 upgrade wizard and everytime I try to update the upgrade wizard says «we cannot connect you right now...» »

  I use a wired connection and my Internet connection works perfectly. My PC is compatible with the requirements of Windows 8.

  Please help me and solve the problem.

  I'm pretty sure that microsoft does not offer 8 or 8.1 free download. Microsoft does not offer

  its software like that, its probably anti-spam. Check this link for free there is no, OS, Win 8 downloads

  except enterprise edition...

  https://www.Microsoft.com/en-us/search/result.aspx?q=Windows%208%20trial%20SOFTWARE

• I use MSN Explorer to my email. It does not connect and I get error code ox80072eff

  I use MSN Explorer to my email.  It does not connect and I get error code ox80072eff.  What can I do to fix this?

  Hi JoshKimbell,

  Please see the next Windows Live Forums thread:

  http://windowslivehelp.com/thread.aspx?ThreadId=c51f5e01-f5c4-4ec5-B470-8b0058f5f980

  If you continue to have problems, please repost your question on the following link:

  http://windowslivehelp.com/forums.aspx?ProductID=1

  Thank you!

• The network icon shows not connected, but in reality I'm connected and can browse internet.

  Network icon does not display connected

  The network icon shows not connected, but in reality I'm connected and can browse internet.

  Could grateful if someone let me know what could be the reason.

  Thanks in advance

  Hello world

  I had the same problem and I solved it by unplugging my pc to the modem, wait about 30 seconds and reconnected. This means that if you do the same thing with your network adapter problem could be solved. Try this option, you will not lose anything

• Encarta Dictionary works do not mistake: this service could not be searched because you are not connected to the Internet. Connect, and then try again

  Original title: Encarta Dictionary (not searched)

  Encarta dictionary does not. I get the message "this service could not be searched because you are not connected to the Internet.  Connect, and then try again. "However, I am connected to the Internet.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Try to start your system in safe mode with network and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• WRT54G loses connection and will not let me connect again

  WIFI at home was great for 2 years, then every sudden in the last 2 weeks I lose my signal on my laptop and iPhone. Then, I can not find the signal, or if the device detects the signal it wont let me connect. He hears no even except my wep key, I get a message saying that I can't connect to the network. Usually, if I unplug my router and the modem I can connect and wifi takes about 24 hours or so I lost. Any help?

  Since you have already updated the firmware on your router, you reset your router and re-configured all the settings on your router? If this isn't the case, then press in and hold the reset for 30 seconds button... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

  When you re - configure all your router settings, you must change some settings under part wireless router...

  Set the channel on your router 11-2, 462 GHz Wireless and that the broadcast of the SSID should be activate...

  Then click the sub-tab under Wireless 'Advance Wireless Settings' and change the tag to 75 interval... Change the Fragmentation threshold to 2304 change the RTS threshold to 2307... Click 'save settings '...

  Now let's see if you can locate your wireless network and try to connect...

• When I try and send a file to my laptop I get this error: "bluetooth device not found please make sure that your bluetooth device is propably connected and turned on."

  original title: BLUETOOTH PROBLEM Please HELP!

  When I try to send a file from my computer to my cell phone an error message appears saying "bluetooth device not found".

  Make sure that your bluetooth device is propably connected and turned on. »

  In addition, the mobile is unable to send any file to computer th.

  I've already matched the mobile with the computer and I use windows 7 please help.

  
  

   

  When I try to send a file from my computer to my cell phone an error message appears saying "bluetooth device not found".

  Make sure that your bluetooth device is propably connected and turned on. »

  In addition, the mobile is unable to send any file to computer th.

  I've already matched the mobile with the computer and I use windows 7 please help.

  
  

  Hey xtheultimatethinkerx

  Here is the vista forums

  Try the repost in Forum windows 7 the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

  Walter, the time zone traveller

• When not in Windows service will change screen what ever I've sat and that he go the first screen where it asks who is connect and it crashes my computer

  original title: security

  Here's the question-problem: when not in use Windows will change screen what ever I've sat and go the first screen where it asks who is connect and it crashes my computer. All I have to do is click on the little box that says locked and I go back to what I was doing. I don't want to do this. I have magic jack phone service and when she did this, I do not get calls? Is it possible that turns off. I have only one user of this computer.

  Go to Start\Control Panel\Hardware and Sound\Power Options\Edit the parameters of the Plan

  Change the option put the computer to sleep time forever!