Do not download the updates of Windows
Hello.
No Windows Update went through for my laptop - a Dell Inspiron - since June.
He uses Windows 7, Intel Celeron CPU, 64-bit operating system.
Everything seems to have slowed dramatically. Running a virus checker/CCleaner/malware cleaner etc all take forever. As does the search for updates. (It checks that I type and done so for the past half an hour.)
I did, at this stage - yesterday - to reach a point where I was told that I had 1 updated 6 optional updates and important. Which does not seem much since June. When I tried to download, nothing happened.
I have trouble shooted and run virus/malware ladies etc - but nothing came.
I'm not very technologically minded, but if there is a simple solution, I would be very grateful.
Thank you in advance if you can help me.
James
The value of the automatic updates to "never check updates" and then restart Windows. Then, install KB3172605.
Best regards, VZ
Tags: Windows
Similar Questions
-
Does not download the updates of Windows
My computer will not download the updates of windows. For some reason, it considers that it is not connected to the internet. I installed a new virus program last night and it will not download updates for it to be.
My computer will not download the updates of windows. For some reason, it considers that it is not connected to the internet. I installed a new virus program last night and it will not download updates for it to be.
was the virus prog, a virus? There are a few out there.
Delete/remove virus prog and try again.
-
Does not download the updates of Windows 8
I am trying to install the updates of Windows 8 so that I can install Windows 8.1. (The next problem is for the installation of update of Windows 8, NOT upgrading to Windows 8. 1) When I go to download updates, he said only: "Download 90 updates (0 total KB, 0% complete)" and it will not actually download anything.
You might be able to fix some problems automatically by running the Windows Update Troubleshooter (click the link to use it). In most cases, this current enforcement tool, by restarting and then check for updates again will solve the problem.
-
Can not download the update for Windows Media Player in order to play protected files
I am trying to download a digital copy of a movie. I am told:
You upgrade the Windows Media Player security components to play the files on your computer. Upgrade, please follow the instructions below:
- Step 1: Click here for the upgrade of security.
- Step 2: After the upgrade is complete, click on the button 'Next' below.
When I click on the link, it takes me to a page:
http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp
It says to click on the upgrade button, but the upgrade button is not clickable. How can I download this update so I can get my digital copy? He says I'm in compatibility mode for Windows Media Player for windows 95. I hope this helps. Thanks in advance for your help :)
I am trying to download a digital copy of a movie. I am told:
You upgrade the Windows Media Player security components to play the files on your computer. Upgrade, please follow the instructions below:
- Step 1: Click here for the upgrade of security.
- Step 2: After the upgrade is complete, click on the button 'Next' below.
When I click on the link, it takes me to a page:
http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp
It says to click on the upgrade button, but the upgrade button is not clickable. How can I download this update so I can get my digital copy? He says I'm in compatibility mode for Windows Media Player for windows 95. I hope this helps. Thanks in advance for your help :)
========================================
I was wondering... you are totally unable to download the file
on your hard drive? Or... you can download the file to your hard drive
by car, but simply cannot display it?If you right click the executable for Windows Media Player and
in the menu choose... Properties / Compatibility tab is...
Windows 95, chosen for Compatibility Mode? If_Yes_try
unchecking the box / apply / OK.It might be the next thread deals with the same issue...
a few ideas:Problem of downloading a digital film; button on the web page
The security component upgrade does not work
http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/da05c4f4-0e90-4BAE-992b-238b7cc3f507Good luck...
Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
I can not download the updates of Windows 7 as 10 Windows tries to install
I want to install updates for Windows 7, but Windows 10 eager to install guard.
I want to keep Windows 7 for a while before considering the upgrade to Windows 10
Is it possible to install these updates without uninstalling the Windows 10 program?
I downloaded the GWX Panel and it does exactly what it says on the Tin - brilliant!
Download of Windows 10 disappeared from the update panel and I downloaded successfully the Windows 7 updates that I wanted.
Thank you for all your help.
-
Can not download the updates/install windows vista
I can't get updates on windows vista Home premium running on a computer laptop advent, everytime I try to get the most recent error messages WindowsUpdate_800F081F WindowsUpdate_dt000, also computer then turns off.
Hello Al nonymous,.
Method 1: Please visit it mentioned MS link for resolutions below. Hope this can solve your problems,
http://support.Microsoft.com/kb/947821
--
-
Widows Vista - can not download the updates of Windows, Itunes.
My laptop back in the shop, now, it is not the window updates and won't let me download I tunes program. Said to remove NORTON and extinguish the fire wall. Still, this isn't helping.
Any suggestions?
If it were me, I would take it back to the store and demand that they resolve correctly.
It comes with Vista, upgrade install and activate Forum.
http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads
They will help you with your issue iTunes in Forum Vista programs at the above address.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
I was not able to download the updates of Windows XP
I have a dell machine running xp / sp3 who has started having failures to download or install updates may 9. Since then he has not installed updates even if it is set to do so all night at 04:00. It is also doing the same thing on the other computer desk in the small office LAN we have running off a verizon for DSL router. Chess began the same night, May 9. Here to install updates from the windows update page also failed. I ran the utility 'Difficulty now' from microsoft, and it has not fixed the problem.
Thanks in advance for your help to solve this problem.
Original title: I was not able to download the updates of Windows XP since May 9. Downloads keep failing.
If you have been playing around with the settings, you'd be wise to resinstall. All that are "machine accounts" which are automatically defined by the system to the evolution of random passwords. If you have accounts of changes of ntauthority to other accounts, you perhaps weakened the security level of the operating system.
No it's not a portal, that even Microsoft doesn't know what are these passwords.
-
try to download the update of windows... all I get is "the website has encountered a problem and cannot display the page you are trying to view" error number: 0x8024400a the... no idea on how to solve this problem?
http://support.Microsoft.com/kb/2497281
You may be unable to access the Windows Update site...
You must be at the level of Service Pack 3 before you can use Windows updates.
To determine which service pack is currently installed on your computer, follow these steps:
- Click Startand then click run.
- Copy and paste, or type the following command, and then click OK:winver
A dialog box displays the version of Windows and the service pack that is currently installed on your computer.
If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).
How to obtain the latest Windows XP service pack
http://support.Microsoft.com/kb/322389Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall
Steps to take before you install Windows XP Service Pack 3
http://support.Microsoft.com/kb/950717It is stated in "How to obtain the latest service pack XP" is.
If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:
-
When I try to download the update of windows I get an error code every time: 802440F.
When I try to download the update of windows I get an error code every time: 802440F. Can you please help me solve this problem?
@ Evanston only!...
You see the effects of a hijackware infection! If you had used the computer longer, I might recommend trying to detect & remove infections. But it would probably take a week or two and I'm sure you have better to do with your time right now so I would recommend the following (which shouldn't take any more than two hours of uninterrupted time).
See...
Cleaning a compromised system
http://TechNet.Microsoft.com/en-us/library/cc700813.aspxPersonal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!
HOW to do a clean install of Win7: see "using the custom installation and formatting the hard drive option" (or "reinstall it Windows 7") http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7 article
NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").
After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:
4 steps to help protect your new computer before going online
http://www.Microsoft.com/security/pypc.aspxVERY IMPORTANT! -Online free trial Norton will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool again Norton before installing updates AND BEFORE installing your new application antivirus (for example, Avast5 or Microsoft Security Essentials, free).
Tip: Do not install Spybot again; It's really overkill in Win7 my humble OPINION, especially if you are installing Microsoft Security Essentials.
See also:
Risks & benefits of P2P file sharing
http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
http://www.us-cert.gov/CAs/tips/ST05-007.htmlMeasures to help prevent spyware
http://www.Microsoft.com/security/spyware/prevent.aspxMeasures to help prevent computer worms
http://www.Microsoft.com/security/worms/prevent.aspxAvoid fake security software!
http://www.Microsoft.com/security/antivirus/rogue.aspxIf you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/w7repair/threads
If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.
Wish I had better news for you. Good luck & achieve before Thanksgiving 2010!
-
Unable to download the update for Windows Vista
Try to download the update for Windows Vista 28. MB (big enough file) download also refers to "KB980248. He continues to show "failed" and "errors found." 'code 80070017' never had problems to download the updates of windows before.
0 X 80070017-2147024873 - ERROR_CRC
Data error (cyclic redundancy check).The file is damaged or you need clean temporary files on the hard drive, etc.
Have you tried a manual download of the update in question?
Search for a download
http://www.Microsoft.com/downloads/search.aspx?displaylang=en -
Why can't I download the update for windows 8
Why can't I download the update for windows 8 as advertised on the site?
Windows 8 will be available for download upgrade of existing PCs in more than 140 markets and 37 languages in earlyhttp://www.windows.com/buy at 12: 00, local time in branches worldwide.
You can read the full announcement here
-
After an automatic download of Windows security update my wireless card did not work. He could not find a wireless networks that she normally
the fact. When I used a LAN cable I internet connection.When I did a system restore to exclude the update of Windows my wireless card security worked perfectly.The same thing has just happened and once again had to do a system restore to get a wireless internet network connection. I can only assume that the Windows Security Update for Windows Vista (KB2753842) is the problem.Please indicate if this update is critical and if this is the case, what can I do to make sure my wireless card working?Thank you.RoyThank you very much for your answer.
I have now solved the problem by using the network connection software to diagnose and repair the problem. My wireless network now works with the update in question.
Kind regards
Roy.
Hi royhorrobin,
Please report the problem to the Microsoft Community Forum.We will help you solve the problem.1. What is the brand and model of the computer?2. do you get an error message?We would like to tell you that this is a critical update...Find information here:Here are some steps that you can follow:Method 1:Step 1: Restore the system to the United Nations-isntall the software update.ReferWhat is system restore?Step 2: Put the computer to boot, with warning...From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135Step 3: Download and install the update manually to the clean boot.Method 2:Try to update the Wireless driver and check to see if the same problem happens.a. click on start
b. right click on computer
c. click Properties
d. click on Device Manager on the left hand sidee. in the list of hardware categories, find the device you want to update, and then double-click the device name.
f. click on the driver tab, click Update driver and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.For more information, see:
Method 3:Also, try the steps from the link below:Hope above methods solves the problem. If the problem persists, you can write back to us and we will be happy to help you further. -
Microsoft has released a patch missed for DPM in July that breaks the ability of DPM to remove older restore points. My server is invaded by the recovery points and I would like to address them. Failed to remove the bad fix, update rollup 7 for SC DPM, in Add/Remove programs. The new version of the patch does not appear in Windows Update, probably because she sees that the wrong version is here.
The only place where I can find to download the update rollup 7 fixed is here:
http://catalog.update.Microsoft.com/v7/site/search.aspx?q=3065246
The download site does not at all on Microsoft Edge, Chrome or Firefox. On I.E. I can see the "basket" link, but it still errors out before presenting a download.
By clicking on 'help' on this page provides a link to send a mail to * address email is removed from the privacy * which gives a failure of discount if nondelivery report send you it.
By clicking 'Send a problem' report also channels to the community, not a problem of any kind report form.
So, I'm here. Ask a question about a product in Windows Server, Windows Server is not not a choice of versions of Windows in the form below.
If anyone from Microsoft is reading, correct the download site or give me another way to download it, thanks.
Turn on "Compatibility view" for microsoft.com allowed the download button to appear and I was able to get the file. Looks like a clear indication that this site is updated you need to demote your browsing session to get even to function.
-
Product number: QH753EA #ABU: Wifi works do not since the update of Windows 10
Since the update to windows 10 my wifi stopped working. The key of the keyboard is permenantly orange and that changes in airplane mode when you press. I can connect to internet with the ADSL cable. Network shooting report problems it says only: the "Wireles capability is disabled" but I cannot turn it on.
Return you to W7.
I highly doubt that Realtek will publish all the drivers for this model card W10 since they ceased support of the drivers for this card model to S8.
Maybe you are looking for
-
How can I "downgrade" the BIOS on Satellite Pro P100 - 160 (PSPAE)
I have just flashed the BIOS on my Satellite Pro P100 4.8. The CPU runs at 100%. (90% + for windows explore) Only a single core is recognized by my Vista gadget. 85 CPU temperature How can I "downgrade" the BIOS? Where are the older versions?
-
Photosmart C5180 driver for Windows 7 RC
Are there drivers (beta or not) available for this printer all-in-One on Windows 7? The Vista 64-bit driver should work on Windows 7 as well, but the installation program stops due to OS version control.
-
Generating a signal 10-bit via USB-6363
Greetings, I need to characterize a 10-bit DAC at work using Labview and NI USB-6363. I have very little experience using Labview and need of a direction for this task. We are only interested in the INL and DNL. What I have in mind is to show the bin
-
Impossible to install my dvd containing the update of wordperfect files
The dvd contains files converted wordperfect X 5 but does not contain a Setup program or any program exe and microsoft will not accept. All the answers?
-
Today, I took my laptop and that fixed it. They installed Windows 7 (I have problems with Windows 10). Now I'm adding all of my programs, and was told that I needed "Service Pack 1" installed. It shows that I have Windows 7 when I right click on comp